scholarly journals DERIVATION OF CRITERIA FOR ASSESSING SOLUTION PRINCIPLES CONFORMAL FOR ADDITIVE MANUFACTURING

2021 ◽  
Vol 1 ◽  
pp. 923-932
Author(s):  
Gregory-Jamie Tüzün ◽  
Enno Garrelts ◽  
Daniel Roth ◽  
Hansgeorg Binz
Keyword(s):  
Additive Manufacturing ◽  
Conceptual Design ◽  
Design For Additive Manufacturing ◽  
The Many

AbstractAdditively manufactured final products and components are not always tailored to the additive manufacturing (AM) process, but they need to be in order to exploit the many advantages and potentials that AM provides. Therefore, an appropriate AM design should be targeted, which reduces the necessary iterations in the developing process of AM products. Although there is a large number of existing literature on the Design for Additive Manufacturing (DfAM), designers usually lack criteria in order to assess AM-conformity in conceptual design. In this paper, we provide a basis for the assessment of solution principles regarding their conformity for additive manufacturing.First, existing literature on DfAM and AM products is reviewed comprehensively to derive criteria for the AM-conformity of solution principles. Subsequently, the correlations between these criteria are identified including the interdependencies to be considered when assessing AM-conformity. A basis for assessment is created, which offers designers early support in the development of AM-conformal designs.

scholarly journals CONCEPTUAL DESIGN FOR ADDITIVE MANUFACTURING: AN EXPLORATIVE STUDY

2020 ◽  
Vol 1 ◽  
pp. 441-450
Author(s):  
F. Valjak ◽  
N. Bojčetić ◽  
A. Nordin ◽  
D. Godec
Keyword(s):  
Additive Manufacturing ◽  
Conceptual Design ◽  
Industrial Application ◽  
Future Trends ◽  
Design For Additive Manufacturing ◽  
Explorative Study ◽  
New Challenges ◽  
Design Workshop ◽  
Design For Am

AbstractWith the broader industrial application of Additive Manufacturing (AM), designers are facing new challenges in conceptual design for AM. To better understand the problematic, the authors organised a design workshop with six experts in AM. The paper presents the results of the conducted design workshop and discusses the current and future trends in research on the conceptual design for AM.

Categorization of Design for Additive Manufacturing Concepts

2019 ◽  
Author(s):  
Sergei Chekurov
Keyword(s):  
Additive Manufacturing ◽  
Heat Exchanger ◽  
Research Community ◽  
Research Field ◽  
Generic Product ◽  
Proof Of Concept ◽  
Design For Additive Manufacturing ◽  
Research Article ◽  
The Many ◽  
Design For Am

Abstract Design for AM (DfAM) has become a widely followed research field with practitioners outside of the research community looking for instructions and inspiration on how to leverage the unique capabilities of AM in their products. The research community has responded by producing an abundance of valuable DfAM literature. However, although each individual research article is useful and can answer specific questions, the connection between them can be difficult to fathom due to the lack of a structured overview of DfAM. This paper proposes a categorization framework to organize the many concepts of DfAM in a structured manner. The framework for the categorization used in this paper is based on a widely used generic product design workflow of Pahl and Beitz that is augmented with concepts from AM literature. The framework is a tool for researchers to position their work in relation to other literature, and it can also be used as a support to achieve novel product designs with AM. To demonstrate how the framework can be used for guided design, the paper presents every stage of the design process in the context of designing a proof-of-concept heat exchanger that leverages the technical benefits of AM.

scholarly journals GEOMETRICAL BENCHMARKING OF LASER POWDER BED FUSION SYSTEMS BASED ON DESIGNER NEEDS

2021 ◽  
Vol 1 ◽  
pp. 1657-1666
Author(s):  
Joaquin Montero ◽  
Sebastian Weber ◽  
Christoph Petroll ◽  
Stefan Brenner ◽  
Matthias Bleckmann ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Use Case ◽  
Powder Bed Fusion ◽  
Design For Additive Manufacturing ◽  
Laser Powder Bed Fusion ◽  
Measuring Systems ◽  
Powder Bed ◽  
Geometric Dimensioning And Tolerancing ◽  
Uncertainty Map ◽  
New System

AbstractCommercially available metal Laser Powder Bed Fusion (L-PBF) systems are steadily evolving. Thus, design limitations narrow and the diversity of achievable geometries widens. This progress leads researchers to create innovative benchmarks to understand the new system capabilities. Thereby, designers can update their knowledge base in design for additive manufacturing (DfAM). To date, there are plenty of geometrical benchmarks that seek to develop generic test artefacts. Still, they are often complex to measure, and the information they deliver may not be relevant to some designers. This article proposes a geometrical benchmarking approach for metal L-PBF systems based on the designer needs. Furthermore, Geometric Dimensioning and Tolerancing (GD&T) characteristics enhance the approach. A practical use-case is presented, consisting of developing, manufacturing, and measuring a meaningful and straightforward geometric test artefact. Moreover, optical measuring systems are used to create a tailored uncertainty map for benchmarking two different L-PBF systems.

scholarly journals REVIEW OF DESIGN HEURISTICS AND DESIGN PRINCIPLES IN DESIGN FOR ADDITIVE MANUFACTURING

2021 ◽  
Vol 1 ◽  
pp. 2571-2580
Author(s):  
Filip Valjak ◽  
Angelica Lindwall
Keyword(s):  
Additive Manufacturing ◽  
Design Process ◽  
Research Question ◽  
Design Principles ◽  
Current Status ◽  
Design For Additive Manufacturing ◽  
Design Heuristics ◽  
Similarities And Differences ◽  
Definition Of ◽  
Support Methods

AbstractThe advent of additive manufacturing (AM) in recent years have had a significant impact on the design process. Because of new manufacturing technology, a new area of research emerged – Design for Additive Manufacturing (DfAM) with newly developed design support methods and tools. This paper looks into the current status of the field regarding the conceptual design of AM products, with the focus on how literature sources treat design heuristics and design principles in the context of DfAM. To answer the research question, a systematic literature review was conducted. The results are analysed, compared and discussed on three main points: the definition of the design heuristics and the design principles, level of support they provide, as well as where and how they are used inside the design process. The paper highlights the similarities and differences between design heuristics and design principles in the context of DfAM.

scholarly journals Smooth Design of 3D Self-Supporting Topologies Using Additive Manufacturing Filter and SEMDOT

2020 ◽  
Vol 11 (1) ◽  
pp. 238
Author(s):  
Yun-Fei Fu ◽  
Kazem Ghabraie ◽  
Bernard Rolfe ◽  
Yanan Wang ◽  
Louis N. S. Chiu
Keyword(s):  
Additive Manufacturing ◽  
Compliant Mechanism ◽  
Optimization Method ◽  
Light Weight ◽  
Design For Additive Manufacturing ◽  
Compliance Minimization ◽  
Performance Requirements ◽  
Specific Performance ◽  
Smooth Design ◽  
Compliant Mechanism Design

The smooth design of self-supporting topologies has attracted great attention in the design for additive manufacturing (DfAM) field as it cannot only enhance the manufacturability of optimized designs but can obtain light-weight designs that satisfy specific performance requirements. This paper integrates Langelaar’s AM filter into the Smooth-Edged Material Distribution for Optimizing Topology (SEMDOT) algorithm—a new element-based topology optimization method capable of forming smooth boundaries—to obtain print-ready designs without introducing post-processing methods for smoothing boundaries before fabrication and adding extra support structures during fabrication. The effects of different build orientations and critical overhang angles on self-supporting topologies are demonstrated by solving several compliance minimization (stiffness maximization) problems. In addition, a typical compliant mechanism design problem—the force inverter design—is solved to further demonstrate the effectiveness of the combination between SEMDOT and Langelaar’s AM filter.

scholarly journals Additive Manufacturing of Sensors for Military Monitoring Applications

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1455
Author(s):  
David T. Bird ◽  
Nuggehalli M. Ravindra
Keyword(s):  
Additive Manufacturing ◽  
High Performance ◽  
Sensor Technology ◽  
Distinct Advantage ◽  
Industrial Sectors ◽  
Sensor Fabrication ◽  
The Us ◽  
3D Printed ◽  
Maximum Protection ◽  
The Many

The US Department of Defense (DoD) realizes the many uses of additive manufacturing (AM) as it has become a common fabrication technique for an extensive range of engineering components in several industrial sectors. 3D Printed (3DP) sensor technology offers high-performance features as a way to track individual warfighters on the battlefield, offering protection from threats such as weaponized toxins, bacteria or virus, with real-time monitoring of physiological events, advanced diagnostics, and connected feedback. Maximum protection of the warfighter gives a distinct advantage over adversaries by providing an enhanced awareness of situational threats on the battle field. There is a need to further explore aspects of AM such as higher printing resolution and efficiency, with faster print times and higher performance, sensitivity and optimized fabrication to ensure that soldiers are more safe and lethal to win our nation’s wars and come home safely. A review and comparison of various 3DP techniques for sensor fabrication is presented.

scholarly journals An Optimization Workflow in Design for Additive Manufacturing

2021 ◽  
Vol 11 (6) ◽  
pp. 2572
Author(s):  
Stefano Rosso ◽  
Federico Uriati ◽  
Luca Grigolato ◽  
Roberto Meneghello ◽  
Gianmaria Concheri ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Structural Optimization ◽  
Geometric Model ◽  
Complex Geometries ◽  
Design Phase ◽  
Design For Additive Manufacturing ◽  
Engineering Software ◽  
Embodiment Design ◽  
Pros And Cons

Additive Manufacturing (AM) brought a revolution in parts design and production. It enables the possibility to obtain objects with complex geometries and to exploit structural optimization algorithms. Nevertheless, AM is far from being a mature technology and advances are still needed from different perspectives. Among these, the literature highlights the need of improving the frameworks that describe the design process and taking full advantage of the possibilities offered by AM. This work aims to propose a workflow for AM guiding the designer during the embodiment design phase, from the engineering requirements to the production of the final part. The main aspects are the optimization of the dimensions and the topology of the parts, to take into consideration functional and manufacturing requirements, and to validate the geometric model by computer-aided engineering software. Moreover, a case study dealing with the redesign of a piston rod is presented, in which the proposed workflow is adopted. Results show the effectiveness of the workflow when applied to cases in which structural optimization could bring an advantage in the design of a part and the pros and cons of the choices made during the design phases were highlighted.

Study on using generative and topology design for feature enrichment in Mars Rovers

2021 ◽  
pp. 87-93
Author(s):  
Abhijith Ram C ◽  
D Ajith
Keyword(s):  
Additive Manufacturing ◽  
Solar System ◽  
Weight Reduction ◽  
Topology Design ◽  
Space Travel ◽  
Design For Additive Manufacturing ◽  
And Topology ◽  
Flexibility Design ◽  
The Origin Of Life ◽  
The Universe

Space travel has always been a crucial task. Exploration and experimenting on Planets in our solar system will help us understand the universe better and also, we could find the origin of life. Rovers play an important role in finding these answers. The problem we have at present is not only with technology to explore the universe but also the ability of our rockets to carry rovers to other rocks. Since a large amount of fuel is required for Space travel, we end with very little cargo that can be sent to explore. As additive manufacturing started to play a vital part in Mechanical Science, we are going to try to use that tool to build a Generative design that helps in parts consolidation, weight reduction, increase flexibility, design optimisation and cost consolidation. Since weight is an important aspect, we could reduce the present rover weight and add additional scientific tools to the rover to increase its scope of search and applications. This project focuses on features enrichment in Rovers by optimizing rover weight and design using Design for Additive Manufacturing concept.

Sign in / Sign up

Export Citation Format

Share Document