scholarly journals Heavy heat shock induced retrotransposon transposition in Drosophila

1999 ◽  
Vol 74 (2) ◽  
pp. 111-119 ◽  
Author(s):  
LUBOV A. VASILYEVA ◽  
EKATERINA V. BUBENSHCHIKOVA ◽  
VADIM A. RATNER

The phenomenon of transposition induction by heavy heat shock (HHS) was studied. Males of a Drosophila isogenic line with a mutation in the major gene radius incompletus (ri) were treated by HHS (37 °C for 1 h followed by 4 °C for 1 h, with the cycle repeated three times) and crossed to untreated females of the same line. The males were crossed 5 d after heat shock, and also 9 d after HHS. Many transpositions were seen in the F1 larvae by in situ hybridization. The rate of induced transposition was at least 2 orders of magnitude greater than that of the control sample, and was estimated to be 0·11 events per transposable element copy per sperm. Two ‘hot’ subdivisions for transpositions, induced probably during the post-meiotic stage of spermiogenesis, were found: 43B and 97DE. Three-quarters of all transpositions were localized in these positions. In other sites the rates of induced transpositions were (1·3–3·2)×10−2 events per occupied segment per sperm, 1 order of magnitude greater than those of the control.

Genetics ◽  
1996 ◽  
Vol 143 (1) ◽  
pp. 365-374 ◽  
Author(s):  
Allan R Lohe ◽  
Daniel L Hartl

Abstract An important goal in molecular genetics has been to identify a transposable element that might serve as an efficient transformation vector in diverse species of insects. The transposable element mariner occurs naturally in a wide variety of insects. Although virtually all mariner elements are nonfunctional, the Mosl element isolated from Drosophila mauritiana is functional. Mosl was injected into the pole-cell region of embryos of D. virilis, which last shared a common ancestor with D. mauritiana 40 million years ago. Mosl PCR fragments were detected in several pools of DNA from progeny of injected animals, and backcross lines were established. Because Go lines were pooled, possibly only one transformation event was actually obtained, yielding a minimum frequency of 4%. Mosl segregated in a Mendelian fashion, demonstrating chromosomal integration. The copy number increased by spontaneous mobilization. In situ hybridization confirmed multiple polymorphic locations of Mosl. Integration results in a characteristic 2-bp TA duplication. One Mosl element integrated into a tandem array of 370-bp repeats. Some copies may have integrated into heterochromatin, as evidenced by their ability to support PCR amplification despite absence of a signal in Southern and in situ hybridizations.


Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5032
Author(s):  
Alec Ikei ◽  
James Wissman ◽  
Kaushik Sampath ◽  
Gregory Yesner ◽  
Syed N. Qadri

In the functional 3D-printing field, poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) has been shown to be a more promising choice of material over polyvinylidene fluoride (PVDF), due to its ability to be poled to a high level of piezoelectric performance without a large mechanical strain ratio. In this work, a novel presentation of in situ 3D printing and poling of PVDF-TrFE is shown with a d33 performance of up to 18 pC N−1, more than an order of magnitude larger than previously reported in situ poled polymer piezoelectrics. This finding paves the way forward for pressure sensors with much higher sensitivity and accuracy. In addition, the ability of in situ pole sensors to demonstrate different performance levels is shown in a fully 3D-printed five-element sensor array, accelerating and increasing the design space for complex sensing arrays. The in situ poled sample performance was compared to the performance of samples prepared through an ex situ corona poling process.


2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Carlos E. Ganade ◽  
Pierre Lanari ◽  
Daniela Rubatto ◽  
Joerg Hermann ◽  
Roberto F. Weinberg ◽  
...  

AbstractAbove subduction zones, magma production rate and crustal generation can increase by an order of magnitude during narrow time intervals known as magmatic flare-ups. However, the consequences of these events in the deep arc environment remain poorly understood. Here we use petrological and in-situ zircon dating techniques to investigate the root of a continental arc within the collisional West Gondwana Orogen that is now exposed in the Kabyé Massif, Togo. We show that gabbros intruded 670 million years ago at 20–25 km depth were transformed to eclogites by 620 million years ago at 65–70 km depth. This was coeval with extensive magmatism at 20–40 km depth, indicative of a flare-up event which peaked just prior to the subduction of the continental margin. We propose that increased H2O flux from subduction of serpentinized mantle in the hyper-extended margin of the approaching continent was responsible for the increased magma productivity and crustal thickening.


1999 ◽  
Vol 30 (3) ◽  
pp. 177-190 ◽  
Author(s):  
Per Atle Olsen

The hydraulic conductivity in structured soils is known to increase drastically when approaching saturation. Tension infiltration allows in situ infiltration of water at predetermined matric potentials, thus allowing exploration of the hydraulic properties near saturation. In this study, the near saturated (ψ≥-0.15 m) hydraulic conductivity was estimated both in the top- and sub-soil of three Norwegian soils. A priory analysis of estimation errors due to measurement uncertainties was conducted. In order to facilitate the comparison between soils and depths, scaling analysis was applied. It was found that the increase in hydraulic conductivity with increasing matric potentials (increasing water content) was steeper in the sub-soil than in the top-soil. The estimated field saturated hydraulic conductivity was compared with laboratory measurements of the saturated hydraulic conductivity. The geometric means of the laboratory measurements was in the same order of magnitude as the field estimates. The variability of the field estimates of the hydraulic conductivity from one of the soils was also assessed. The variability of the field estimates was generally smaller than the laboratory measurements of the saturated hydraulic conductivity.


Apidologie ◽  
2006 ◽  
Vol 37 (5) ◽  
pp. 507-516 ◽  
Author(s):  
Elaine C.M. Silva-Zacarin ◽  
Ales Gregorc ◽  
Regina L.M. Silva de Moraes

Genetics ◽  
1986 ◽  
Vol 114 (1) ◽  
pp. 125-135
Author(s):  
Antony E Shrimpton ◽  
Elizabeth A Montgomery ◽  
Charles H Langley

ABSTRACT It has been hypothesized that Om mutability in Drosophila ananassae (involving spontaneous mutation at 20 loci, resulting in semidominant, nonpleiotropic eye morphology defects) was due to insertion of a transposable element, tom. One particularly unstable Χ-linked Om allele produced several derivatives, one of which has a more extreme Om phenotype and was accompanied by a singed bristle mutant, sn9g. DNA probes from the sn locus of D. melanogaster were used to clone the homologous region of D. ananassae. Analysis of sn9g DNA detected a 6.5-kb insert. Genomic Southern blotting and in situ hybridization techniques showed that this insert is repetitive and dispersed. The existence of the tom element is supported by genetic mapping that established homology between the 6.5-kb sn9g insert and Om mutants at the four Χ-linked loci tested.


2020 ◽  
Author(s):  
Jonathan Bouvette ◽  
Hsuan-Fu Liu ◽  
Xiaochen Du ◽  
Ye Zhou ◽  
Andrew P. Sikkema ◽  
...  

ABSTRACTTomographic reconstruction of cryopreserved specimens imaged in an electron microscope followed by extraction and averaging of sub-volumes has been successfully used to derive atomic models of macromolecules in their biological environment. Eliminating biochemical isolation steps required by other techniques, this method opens up the cell to in-situ structural studies. However, the need to compensate for errors in targeting introduced during mechanical navigation of the specimen significantly slows down tomographic data collection thus limiting its practical value. Here, we introduce protocols for tilt-series acquisition and processing that accelerate data collection speed by an order of magnitude and improve map resolution by ~1-3 Å compared to existing approaches. We achieve this by using beam-image shift to multiply the number of areas imaged at each stage position, by integrating geometrical constraints during imaging to achieve high precision targeting, and by performing per-tilt astigmatic CTF estimation and data-driven exposure weighting to improve final map resolution. We validated our beam image-shift electron cryo-tomography (BISECT) approach by determining the structure of a low molecular weight target (~300kDa) at 3.6 Å resolution where density for individual side chains is clearly resolved.


1969 ◽  
Vol 8 (54) ◽  
pp. 427-440 ◽  
Author(s):  
R. Perla

AbstractModified versions ofin situstrength tests previously applied to metamorphosed snow were developed to measure the mechanical properties of newly fallen snow during storm periods. A large drop-cone penetrometer, protected from the wind by an aluminum shell, was used to determine snow “hardness”. A lightweight model of the Haefeli ram penetrometer measured “ram numbers”. Shear strengths were obtained from large, light-weight frames. Some preliminary tests were made with a shear vane driven by a torque wrench. A new technique was devised for measuring tensile strength whereby a cantilever beam of snow is undercut until it fails under its own weight. Comparisons between the cantilever test and the shear-frame test show high ratios for tensile to shear strength. Cantilever strength plotted against density shows an order of magnitude variation in strength at all densities.


2021 ◽  
Author(s):  
Weijie Sun ◽  
James Slavin ◽  
Anna Milillo ◽  
Ryan Dewey ◽  
Stefano Orsini ◽  
...  

Abstract At Mercury, several processes can release ions and neutrals out of the planet’s surface. Here we present enhancements of dayside planetary ions in the solar wind entry layer during flux transfer event (FTE) “showers” near Mercury’s northern magnetospheric cusp. In this entry layer, solar wind ions are accelerated and move downward (i.e. planetward) toward the cusps, which sputter upward-moving planetary ions within 1 minute. The precipitation rate is enhanced by an order of magnitude during FTE showers and the neutral density of the exosphere can vary by >10% due to this FTE-driven sputtering. These in situ observations of enhanced planetary ions in the entry layer likely correspond to an escape channel of Mercury’s planetary ions, and the large-scale variations of the exosphere observed on minute-timescales by ground-based telescopes. Comprehensive, future multi-point measurements made by BepiColombo will greatly enhance our understanding of the processes contributing to Mercury’s dynamic exosphere and magnetosphere.


2007 ◽  
Vol 4 (4) ◽  
pp. 2441-2491 ◽  
Author(s):  
M. S. Twardowski ◽  
H. Claustre ◽  
S. A. Freeman ◽  
D. Stramski ◽  
Y. Huot

Abstract. During the BIOSOPE field campaign October–December 2004, measurements of inherent optical properties from the surface to 500 m depth were made with a ship profiler at stations covering over ~8000 km through the Southeast Pacific Ocean. Data from a ~3000 km section containing the very clearest waters in the central gyre are reported here. The total volume scattering function at 117°, βt(117°), was measured with a WET Labs ECO-BB3 sensor at 462, 532, and 650 nm with estimated uncertainties of 2×10−5, 5×10−6, and 2×10−6 m−1 sr−1, respectively. These values were approximately 6%, 3%, and 3% of the scattering by pure seawater at their respective wavelengths. From a methodological perspective, there were several results: – bbp distributions were resolvable even though some of the values from the central gyre were an order of magnitude lower than the lowest previous measurements in the literature; – Direct in-situ measurements of instrument dark offsets were necessary to accurately resolve backscattering at these low levels; – accurate pure seawater backscattering values are critical in determining particulate backscattering coefficients in the open ocean (not only in these very clear waters); the pure water scattering values determined by Buiteveld et al. (1994) with a [1 + 0.3S/37] adjustment for salinity based on Morel (1974) appear to be the most accurate estimates, with aggregate accuracies as low as a few percent; and – closure was demonstrated with subsurface reflectance measurements reported by Morel et al. (2007) within instrument precisions, a useful factor in validating the backscattering measurements. This methodology enabled several observations with respect to the hydrography and the use of backscattering as a biogeochemical proxy: – The clearest waters sampled were found at depths between 300 and 350 m, from 23.5° S, 118° W to 26° S, 114° W, where total backscattering at 650 nm was not distinguishable from pure seawater; – Distributions of particulate backscattering bbp across the central gyre exhibited a broad particle peak centered ~100 m; – The particulate backscattering ratio typically ranged between 0.4% and 0.6% through the majority of the central gyre from the surface to ~210 m, indicative of "soft" water-filled particles with low bulk refractive index; and – bbp at 532 and 650 nm showed a distinct secondary deeper layer centered ~230 m that was absent in particulate attenuation cp data. The particulate backscattering ratio was significantly higher in this layer than in the rest of the water column, reaching 1.2% in some locations. This high relative backscattering, along with the pigment composition and ecological niche of this layer, appear to be consistent with the coccolithophorid F. profunda. Moreover, results were consistent with several expectations extrapolated from theory and previous work in oceanic and coastal regions, supporting the conclusion that particulate and total backscattering could be resolved in these extremely clear natural waters.


Sign in / Sign up

Export Citation Format

Share Document