Estimation of fat content of beef carcasses in a commercial classification system

1983 ◽  
Vol 101 (3) ◽  
pp. 513-516 ◽  
Author(s):  
B. L. McIntyre ◽  
W. J. Ryan
Keyword(s):  
Fat Content ◽  
Experimental Conditions ◽  
Commercial Use ◽  
Beef Carcasses ◽  
Wide Range ◽  
Fat Thickness ◽  
The Mean ◽  
Thickness Measurements ◽  
The Relationship ◽  
Two Sides

SUMMARYA total of 25 steer carcasses from a wide range of breeds and carcass weight and fatness were used to examine the relationship between a range of fat thickness measurements and the dissected fat content of beef carcasses. Fat thickness measurements included those on the hot carcass suitable for ‘commercial’ use and others on the cold carcass commonly used in research.The mean of the measurements of fat thickness from the two sides of the hot carcass between the 12th and 13th ribs (12H) gave the most accurate prediction of carcass fat content (FPCT). The relationship was described by the equation FPCT = 14·61 + 1·85 (12H) (R2 = 0·92; S.E. of prediction of individual FPCT at the mean= ±2·17%).The mean of four fat thickness measurements made on the quartered surface between the 10th and 11th ribs of the cold carcass was the next most accurate predictor (S.E. = 2·28%) of fat content. Fat thickness measurements made on the hot carcass between the 10th and 11th ribs were the least satisfactory.Although the hot carcass measurements between the 12th and 13th ribs were made under commercial conditions and included a wide range of types of cattle the prediction of fat content from these measurements had a marginally lower standard error than the prediction based on measurements made under experimental conditions.

THE EFFECT OF RIBBING SITE ON FAT THICKNESS MEASUREMENTS AND THE PREDICTION OF BEEF CARCASS COMPOSITION

1986 ◽  
Vol 66 (2) ◽  
pp. 541-545
Author(s):  
S. D. M. JONES ◽  
A. K. W. TONG ◽  
A. H. MARTIN ◽  
W. M. ROBERTSON
Keyword(s):  
Key Words ◽  
Fat Content ◽  
Carcass Composition ◽  
Prediction Equations ◽  
Beef Carcasses ◽  
Fat Thickness ◽  
Standard Deviations ◽  
Thickness Measurements ◽  
Beef Carcass

Over a 2-yr period, 409 beef carcasses were used to assess the differences of ribbing site (11/12th vs. 12/13th) on fat thickness measurements and the use of these measurements to predict carcass composition. Minimum fat thickness taken at the location specified for use under Canadian beef carcass grading procedures was 1.6 mm less, averaged over all carcasses at the 13th rib, compared with the same measurement taken at the 12th rib. Prediction equations for estimating carcass lean or fat content based on coefficients of determination and residual standard deviations had similar precision using fat thickness measurements from either ribbing site. These results are discussed in reference to National carcass grading procedures. Key words: Carcass grading, fat thickness, carcass composition

Estimation of the carcass composition of different cattle breeds and crosses from fatness measurements and visual assessments

1986 ◽  
Vol 106 (2) ◽  
pp. 223-237 ◽  
Author(s):  
A. J. Kempster ◽  
J. P. Chadwick ◽  
D. D. Charles
Keyword(s):  
Subcutaneous Fat ◽  
Visual Assessment ◽  
Carcass Composition ◽  
Beef Breed ◽  
Percentage Unit ◽  
Wide Range ◽  
Fat Thickness ◽  
Substantial Bias ◽  
Visual Assessments ◽  
Thickness Measurements

SUMMARYCarcass data for 1053 steers from the Meat and Livestock Commission's beef breed evaluation programme were used to examine the relative precision of alternative fatness assessments for predicting carcass lean percentage. The data were from four trials and comprised both dairy-bred and suckler-bred cattle by a wide range of sire breeds.A visual assessment of carcass subcutaneous fat content to the nearest percentage unit (SFe) was the single most precise predictor both overall (residual S.d. = 2·28) and within breed (residual S.d. = 2·05). Precision was improved by the addition in multiple regression of the percentage perinephric and retroperitoneal fat (KKCF) in carcass, a visual score of the degree of marbling in the m. longissimus and selected fat thickness measurements taken by calipers on cut surfaces (residual S.d. = 2·11 (overall) and 1·90 (within breed)).When the best overall equation was applied to the breed means, there was substantial bias (predicted – actual carcass lean percentage). Biases ranged from +2·5 (purebred Canadian Holstein and Luing) to – 1·3 (Limousin crosses).Breeds differed significantly in carcass lean content when compared at equal levels of fatness measurements. The differences depended both on the precision with which the measurements predicted carcass lean content and the observed differences in carcass composition that existed before adjustments to equal fatness were made.The robustness of prediction equations was examined by applying them to independent sets of data (a total of 334 carcasses) from four other trials involving steers, heifers, cows and young bulls. Equations were stable for cattle of the same breed, sex and similar levels of fatness but important bias was found between more extreme types of cattle.

Cell structure and mechanical properties of microcellular PLA foams prepared via autoclave constrained foaming

2020 ◽  
pp. 026248932093032
Author(s):  
Jinwei Chen ◽  
Ling Yang ◽  
Dahua Chen ◽  
Qunshan Mai ◽  
Meigui Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cell Size ◽  
Cell Structure ◽  
Saturation Pressure ◽  
Tensile Modulus ◽  
Cell Structures ◽  
Wide Range ◽  
The Mean ◽  
Constrained Foaming ◽  
The Relationship

Microcellular polylactic acid (PLA) foams with various cell size and cell morphologies were prepared using supercritical carbon dioxide (sc-CO2) solid-state foaming to investigate the relationship between the cell structure and mechanical properties. Constrained foaming was used and a wide range of cell structures with a constant porosity of ∼75% by tuning saturation pressure (8–24 MPa) was developed. Experiments varying the saturation pressure while holding other variables’ constant show that the mean cell size and the mean cell wall thickness decreased, while the cell density and the open porosity increased with increase of pressure. Tensile modulus of PLA foams decreased with increasing the saturation pressure, but the specific tensile modulus of PLA foams was still 15–80% higher than that of solid PLA. Tensile strength and elongation at break first increased with increasing saturation pressure up to 16 MPa and then decreased with further increasing saturation pressure (20 MPa and 24 MPa) at which opened-cell structure produced. Compressive modulus, compressive strength, and compressive yield stress also followed the same variation trend. The results indicated that not only cell size plays an important role in properties of PLA foams but also cell morphology can influence these properties significantly.

An analysis of the variation between dairy-sire progeny-groups for milk yield and fat content

1958 ◽  
Vol 1958 ◽  
pp. 19-29 ◽  
Author(s):  
Alan Robertson ◽  
S. S. Khishin
Keyword(s):  
Milk Yield ◽  
Comparison Method ◽  
Fat Content ◽  
Fat Percentage ◽  
Simple Method ◽  
Factors Affecting ◽  
Special Cases ◽  
The Mean ◽  
Milk Marketing ◽  
The Relationship

The past few years have seen the development in Great Britain of the ‘contemporary comparison’ method for evaluating progeny tests of dairy sires (Macarthur, 1954; Robertson, Stewart and Ashton 1956). The final overall figure attached to a sire is the mean difference between the yield of his daughters and that of other heifers milking in the same herd in the same year, with due regard for the numbers of animals in the two groups. Although it has some imperfections in special cases, this is probably the most informative simple method of evaluating a sire for yield and, fortunately, one which could be easily integrated with the existing recording system. The method has been turned into a simple routine in the Bureau of Records of the Milk Marketing Board and several thousand bulls have now been evaluated. In this paper, we shall be mostly concerned to use this material to investigate the heritabilities of milk yield and fat content and the relationship between the two in the different breeds. The information that we shall use consists, for each bull, of the mean contemporary comparison, with its effective ‘weight’, and the average fat percentage of the daughters. Before we deal with the observed results, we should go into rather more detail into the nature of these two figures and into the factors affecting them.

Relationship between Rated Degree of Familiarity with Individual Sentences and the Extent of Recall of Connected Discourse

1966 ◽  
Vol 19 (3_suppl) ◽  
pp. 1195-1202 ◽  
Author(s):  
John A. Mills ◽  
Alan Nicolas-Fanourakis
Keyword(s):  
Rating Scale ◽  
Interference Theory ◽  
Connected Discourse ◽  
Wide Range ◽  
The Mean ◽  
The Individual ◽  
The Relationship

An assessment was made of the strength and direction of the relationship between rated degree of familiarity for connected discourse and the extent of recall of such material. The experimental material consisted of two short passages of prose (a narrative and an argument) and of a rating scale containing all the sentences from these passages inserted randomly among other individual sentences selected from a wide range of sources. 20 Ss provided both recall scores for the passages (which were presented whole) and familiarity ratings for the sentences in the rating scale. When recall scores for the individual sentences were correlated with the mean ratings, a positive and significant value was found. The bearing of this finding on (he expectations of interference theory is discussed.

scholarly journals Association of Epicardial Fat Thickness with Left Ventricular Diastolic Function in a Community Population

2020 ◽  
Author(s):  
Wei Ma ◽  
Baowei Zhang ◽  
Ying Yang ◽  
Litong Qi ◽  
Jin Zhou ◽  
...  
Keyword(s):  
Diastolic Function ◽  
Left Ventricular ◽  
Free Wall ◽  
Right Ventricular Free Wall ◽  
Fat Thickness ◽  
The Mean ◽  
Lv Diastolic Dysfunction ◽  
The Right ◽  
The Relationship ◽  
Lv Diastolic Function

Abstract Background Left ventricular (LV) diastolic dysfunction can be a sole cause of all-cause mortality, while increased epicardial fat thickness (EFT) is significantly correlated with impairment of LV diastolic function. Herein, we examined the relationship between EFT measured by echocardiography and LV diastolic function in a Beijing community population.Methods We included 1004 participants in this study. Echocardiographic parameters including E and A peak velocity, the early diastolic velocities (e’) of the septal and lateral of mitral annulus using tissue doppler imaging, E/e’, and EFT, were measured. EFT1 was measured perpendicularly on the right ventricular free wall at end-diastole in the extension line of the aortic root. EFT2 was the maximum thickness measured perpendicularly on the right ventricular free wall at end-diastole. Multivariate linear regression was used to analyze the relationship between EFT and the mean e’ and E/e’.Results The mean age of the participants was 63.91 ± 9.02 years old (51.4% men). EFT1 and EFT2 were negatively correlated with e’ lat, e’ sep, and e’ mean (p < 0.05), and positively correlated with E/e’ lat, E/e’ sep, and E/e’ mean. Multivariate regression analysis showed that EFT1 and EFT2 were independently and negatively correlated with e’ mean (EFT1: β = −0.089 [95% confidence interval = −0.177, −0.000, p = 0.050]; EFT2: β = −0.078 [95% confidence interval = −0.143, −0.012, p = 0.020]). There were no interactions between EFT and any covariates, including age or heart groups, sex, BMI, or presence of hypertension, diabetes, or coronary heart disease in relation to LV diastolic dysfunction.Conclusions EFT was negatively and independently correlated with e’ mean, suggesting that more attention to this type of adipose fat is required for cardiovascular disease therapy.

Concanavalin-A-mediated thymocyte agglutination: a model for a quantitative study of cell adhesion

1982 ◽  
Vol 56 (1) ◽  
pp. 21-48
Author(s):  
C. Capo ◽  
F. Garrouste ◽  
A.M. Benoliel ◽  
P. Bongrand ◽  
A. Ryter ◽  
...  
Keyword(s):  
Cell Adhesion ◽  
Quantitative Study ◽  
Concanavalin A ◽  
Cell Metabolism ◽  
Quantitative Model ◽  
Experimental Conditions ◽  
Wide Range ◽  
Binding Probability ◽  
The Mean ◽  
High Concentrations

This report describes a quantitative study of the agglutination of rat thymocytes with concanavalin A (ConA). The probability that two ConA-coated cells remain bound after centrifugation was determined over a wide range of lectin concentrations. The minimal force required to separate agglutinated cells and the number of ConA molecules bound per cell were measured in similar experimental conditions. Agglutinated cells were examined by electron microscopy to estimate the area of membrane involved in adhesion. The dependence of agglutination on cell metabolism was studied: cold (4 degrees C), sodium azide (15 mM) and cytochalasin B (10 micrograms/ml) inhibited thymocyte adhesion. The importance of lateral movements of ConA molecules was assayed by measuring the adhesion of ConA-coated glutaraldehyde-fixed thymocytes to untreated cells: substantial binding occurred, but at a reduced level relative to untreated cells. A mathematical analysis of experimental data allowed the following conclusions. (1) At least 10(3) ConA bonds were involved in cross-linking two bound cells, which required the lectin molecules to be concentrated in the binding area, at least when low ConA concentrations (0.5 microgram/ml or less) were used. (2) The dependence of the binding probability on lectin concentration was fairly linear when the latter was small, which implied that the limiting step in cell-cell adhesion was the formation of a bond between a single ConA molecule and a ligand on the other cell. (3) The mean intercellular-contact time for the formation of this first bond was about 10 S for high concentrations of ligand (8 micrograms/ml). It was possible to fit the above data into a physically consistent quantitative model of cell adhesion.

Onset to reperfusion time as a determinant of outcomes across a wide range of ASPECTS in endovascular thrombectomy: pooled analysis of the SWIFT, SWIFT PRIME, and STAR studies

2019 ◽  
Vol 12 (3) ◽  
pp. 240-245 ◽  
Author(s):  
Joon-Tae Kim ◽  
Mayank Goyal ◽  
Elad I Levy ◽  
David Liebeskind ◽  
Reza Jahan ◽  
...  
Keyword(s):  
Pooled Analysis ◽  
Infarct Core ◽  
Endovascular Thrombectomy ◽  
Wide Range ◽  
Star Studies ◽  
The Mean ◽  
Treat All ◽  
Relationship Of ◽  
The Relationship ◽  
Core Infarct

BackgroundThe time–benefit relationship of endovascular thrombectomy (EVT) according to the size of the core infarct has been incompletely explored in prior studies. We investigated whether established infarct core size on baseline imaging modifies the relationship between onset-to-reperfusion time (OTR) and functional outcomes in patients with acute ischemic stroke treated with EVT.MethodsWe analyzed a database containing individual patient data pooled from three prospective Solitaire stent retriever studies. The inclusion criteria were treatment with a Solitaire device and achievement of substantial reperfusion (modified Thrombolysis in Cerebral Infarction 2b–3). Main analyses were performed in patients with baseline Alberta Stroke Program Early CT Scores (ASPECTSs) of 7–10.ResultsAmong the 305 patients (mean age 67±13 years, 58% women), the proportions of patients in different categories of pretreatment infarct extent were: small (ASPECTS 9–10) 52.0%, moderate (ASPECTS 7–8) 37.1%, and large (ASPECTS 0–6) 7.6%. The mean OTR was 297±95 min. At 3 months, 60.1% of the patients achieved a good outcome. For OTRs of 2–8 hours, the rates of good outcomes at all time points were higher with higher baseline ASPECTS but declined with similar steepness. Both baseline ASPECTS (OR 1.23 (95% CI 1.04 to 1.45)) and OTR (every 30 min delay, OR 0.80 (95% CI 0.73 to 0.88)) were independently associated with a good 3-month outcome. No interaction between OTR and baseline ASPECTS was observed.ConclusionsAlthough patients with higher baseline ASPECTS are more likely to have good clinical outcomes at all OTR intervals after 2 hours, this benefit consistently declines with time, even in patients with a small infarct core, reinforcing the need to treat all patients as quickly as possible.

The appraisal of fineness in greasy wool sale lots

1975 ◽  
Vol 85 (1) ◽  
pp. 45-52 ◽  
Author(s):  
K. J. Whiteley ◽  
D. Charlton
Keyword(s):  
Confidence Interval ◽  
Fibre Diameter ◽  
Mean Value ◽  
Wide Range ◽  
The Mean ◽  
The Relationship

SUMMARYRelationships among quality number, crimp frequency and. fibre diameter of sale lots are reported for a wide range of Australian wools, the quality number appraisals being those of the selling broker and the successful bidder at auction.Results show that sale lots classified as having the same quality number exhibit a 95% confidence interval of ± 2·5 μm about the mean value. This variation is attributed first to the dependence of quality number on staple crimp frequency and secondly to the strength of the relationship between crimp frequency and fibre diameter.

scholarly journals Evolution of bacterial transformation: is sex with dead cells ever better than no sex at all?

Genetics ◽  
1988 ◽  
Vol 119 (1) ◽  
pp. 213-221
Author(s):  
R J Redfield
Keyword(s):  
Deleterious Mutation ◽  
Fitness Function ◽  
Bacterial Transformation ◽  
Wide Range ◽  
Mean Fitness ◽  
The Mean ◽  
Transforming Cell ◽  
Asexual Populations ◽  
The Relationship ◽  
Better Than

Abstract Computer simulations of bacterial transformation are used to show that, under a wide range of biologically reasonable assumptions, transforming populations undergoing deleterious mutation and selection have a higher mean fitness at equilibrium than asexual populations. The source of transforming DNA, the amount of DNA taken up by each transforming cell, and the relationship between number of mutations and cell viability (the fitness function) are important factors. When the DNA source is living cells, transformation resembles meiotic sex. When the DNA source is cells killed by selection against mutations, transformation increases the average number of mutations per genome but can nevertheless increase the mean fitness of the population at equilibrium. In a model of regulated transformation, in which the most fit cells of a transforming population do not transform, transforming populations are always fitter at equilibrium than asexual populations. These results show that transformation can reduce mutation load.

Sign in / Sign up

Export Citation Format

Share Document