scholarly journals Revisiting the concept of the critical period of weed control

Author(s):  
K. Ramesh ◽  
S. Vijaya Kumar ◽  
P. K. Upadhyay ◽  
B. S. Chauhan

Abstract Weeds are a major biotic constraint to the production of crops. Studies on the critical period of weed control (CPWC) consider the yield loss due to the presence of all weeds present in the crop cycle. The CPWC is the time interval between the critical timing of weed removal (CTWR) and the critical weed-free period (CWFP), and the weed presence before and after the extremes of CTWR and CWFP may not significantly reduce crop yield. The crop yield is taken into consideration and weed density or biomass of individual weeds (annual or perennial) is not so important while calculating the CPWC. Only weed density or biomass is considered for calculating weed control efficiency of a particular management practice for which the weed seed bank is also a criterion. However, weed biomass is the outcome after competition experienced by each weed species with the fellow crop and the weeds. Consequently, the weed pressure in the subsequent season will be the cumulative effect of the preceding season too, which is unaccounted for in CPWC. It is argued that in organic farming or low-input farming systems, where herbicides are not used, the concept of CPWC can be misleading and should be avoided. It is concluded that CTWR is more meaningful than the CPWC.

2016 ◽  
Vol 34 (4) ◽  
pp. 721-728 ◽  
Author(s):  
M. PADILHA ◽  
A.A.M. BARROSO ◽  
L.B. CARVALHO ◽  
F.R. COSTA ◽  
S. BIANCO

ABSTRACT The objective was to determine whether a change occurs in the critical period of weed interference prevention in narrow row corn with the use of atrazine and whether there is influence of the herbicide on crop yield components. The treatments consisted of periods without or with an initial weed control (0, 21, 35, 49, 63, 77, and 91 days after emergence), with or without application of atrazine in spikely post-emergence. The experiment was carried out in a 2 x 7 randomized blocks design (with and without weed control and seven periods with three replications). The use or not of atrazine was arranged in a split plot design. The most important weed species were Senecio brasiliensis, Urochloa plantaginea, Conyza bonariensis, Sida rhombifolia, and Solanum spp. Corn yield reduced by 15% and 18% with and without application of atrazine, respectively. The number of grains per spike and corn yield were negatively influenced by coexistence with weeds, while the number of rows per spike, the diameter and length of spike were not affected. Corn yield components were not affected by the use of atrazine. The critical period of weed interference prevention was 35 days without atrazine and 23 days with application of atrazine. There is a reduction of the critical period of weed interference prevention on narrow row corn by using atrazine, with no influence of the herbicide on crop yield.


2019 ◽  
Vol 33 (6) ◽  
pp. 800-807 ◽  
Author(s):  
Graham W. Charles ◽  
Brian M. Sindel ◽  
Annette L. Cowie ◽  
Oliver G. G. Knox

AbstractField studies were conducted over six seasons to determine the critical period for weed control (CPWC) in high-yielding cotton, using common sunflower as a mimic weed. Common sunflower was planted with or after cotton emergence at densities of 1, 2, 5, 10, 20, and 50 plants m−2. Common sunflower was added and removed at approximately 0, 150, 300, 450, 600, 750, and 900 growing degree days (GDD) after planting. Season-long interference resulted in no harvestable cotton at densities of five or more common sunflower plants m−2. High levels of intraspecific and interspecific competition occurred at the highest weed densities, with increases in weed biomass and reductions in crop yield not proportional to the changes in weed density. Using a 5% yield-loss threshold, the CPWC extended from 43 to 615 GDD, and 20 to 1,512 GDD for one and 50 common sunflower plants m−2, respectively. These results highlight the high level of weed control required in high-yielding cotton to ensure crop losses do not exceed the cost of control.


1996 ◽  
Vol 10 (2) ◽  
pp. 253-257 ◽  
Author(s):  
Joan A. Dusky ◽  
William M. Stall

Imazethapyr was evaluated PRE and POST in five lettuce types and chicory under Florida field conditions. The relative sensitivity of leafy crop vigor (most sensitive to most tolerant) to imazethapyr PRE, based on 20% inhibition determined using regression analysis, was as follows: Boston > bibb > crisphead > romaine > leaf > escarole > endive. Leafy crop injury increased as the rate of imazethapyr applied POST increased, with all leafy crops responding in a similar manner. Surfactant addition increased imazethapyr phytotoxicity. Imazethapyr PRE treatments at 0.067 kg ai/ha provided greater than 80% control of livid amaranth, common purslane, flatsedge, and common lambsquarters. Imazethapyr POST at 0.067 kg/ha, with surfactant provided control greater than 85% of all weed species. Greater than 85% spiny amaranth control was provided by imazethapyr POST at 0.017 kg/ha. Use of surfactant with imazethapyr did not improve spiny amaranth control over imazethapyr with no surfactant. POST treatments did not decrease leafy crop yield compared with the hand-weeded check. Imazethapyr applied PRE reduced crop yield compared to the POST treatments and the hand-weeded control.


Weed Science ◽  
2015 ◽  
Vol 63 (1) ◽  
pp. 346-352 ◽  
Author(s):  
Nicholas E. Korres ◽  
Jason K. Norsworthy

Cover crops are becoming increasingly common in cotton as a result of glyphosate-resistant Palmer amaranth; hence, a field experiment was conducted in 2009 and 2010 in Marianna, AR, with a rye cover crop used to determine its effects on the critical period for weed control in cotton. Throughout most of the growing season, weed biomass in the presence of a rye cover crop was lesser than that in the absence of a rye cover crop. In 2009, in weeks 2 through 7 after planting, weed biomass was reduced at least twofold in the presence of a rye cover compared with the absence of rye. In 2009, in both presence and absence of a rye cover crop, weed removal needed to begin before weed biomass was 150 g m−2, or approximately 4 wk after planting, to prevent yield loss > 5%. Weed density was less in 2010 than in 2009, so weed removal was not required until 7 wk after planting, at which point weed biomass values were 175 and 385 g m−2in the presence and absence of a cover crop, respectively.


Weed Science ◽  
1996 ◽  
Vol 44 (1) ◽  
pp. 126-132 ◽  
Author(s):  
Anita Dieleman ◽  
Allan S. Hamill ◽  
Glenn C. Fox ◽  
Clarence J. Swanton

Weed control decision rules were derived for the application of postemergence herbicides to control pigweed species in soybean. Field experiments were conducted at two locations in 1992 and 1993 to evaluate soybean-pigweed interference. A damage function was determined that related yield loss to time of pigweed emergence, density, and soybean weed-free yield. A control function described pigweed species response to variable doses of imazethapyr and thifensulfuron. The integration of these two functions formed the basis of an economic model used to derive two weed control decision rules, the biologist's “threshold weed density” and the economist's “optimal dose.” Time of weed emergence had a more significant role than weed density in the economic model. Later-emerging pigweed caused less yield loss and therefore, decision rules lead to overuse of herbicides if emergence time is not considered. The selected herbicide dose influenced the outcome of the control function. Depending on the desired level of weed control, a herbicide could be chosen to either eradicate the escaped weed species (label or biologically-effective doses) or reduce the growth of the weed species and thereby offset interference (optimal dose). The development of a biologically-effective dose by weed species matrix was recommended. Decision rules should not be utilized as an exclusive weed management strategy but rather as a component of an integrated weed management program.


Author(s):  
Melih Yilar Omer Sozen ◽  
Ufuk Karadavut

This study was conducted to determine the effects of weed density and different weed control treatments on chickpea yield and yield components. The experiment was carried out in split plot design with 3 replications in experimental fields of Kirsehir Ahi Evran University during 2016 and 2017 crop seasons. Total nine treatments (no weed control, permanent weed control, one-time hoeing, two-time hoeing, three-time hoeing, herbicide application after emergence, one-time hoeing with herbicide application, two-time hoeing with herbicide application and three-time hoeing with herbicide application) were compared to know the most effective weed control method. Vaccaria pyramidata Medik., Sinapis arvensis L., Acroptilon repens L. weed species were found to be the most intense in the experimental area. All weed control applications had significant effect on chickpea yield and yield components compared to weedy plots. Three-time hoeing with herbicide application increased the yield by 361.55-478.50% compared to weedy plots. Likewise, three-time hoeing application even increased the yield by 348.50-357.09% compared to weedy plots. The results revealed that three-time hoeing with herbicide and three-time hoeing applications stood out in weed management to obtain a good yield in chickpea cultivation at Kirsehir province.


2022 ◽  
Vol 951 (1) ◽  
pp. 012066
Author(s):  
H Hasanuddin ◽  
G Erida ◽  
S Hafsah ◽  
A Marliah ◽  
Y Agustiawan ◽  
...  

Abstract The appearance of weeds on crops has led to the significant loss of crop yield. Therefore, chemical control with herbicides has been an important tool for rapid and efficient weed management in crops. The objective of this study was to evaluate the effect of herbicides oxyfluorfen and pendimethalin against weeds on soybean plantation. This research employed Randomized Completely Block Design (RCBD) Factorial with 2 factors. The first factor was the type of herbicides: oxyfluorfen and pendimethalin. The second factor was herbicide doses: 0, 500, 1000, 1500 and 2000 g a.i ha-1, applied on soybean at 1 day after planting (DAP). The percentage of weed control, percentage of weed coverage, weed species, weed population, and weed dry weight were observed at 3, 5, 7 and 9 weeks after planting (WAP). The results revealed that different types and doses of herbicide applied has affected the percentage of weed control, percentage of weed coverage weed species and weed dry weight.


HortScience ◽  
2004 ◽  
Vol 39 (6) ◽  
pp. 1302-1304 ◽  
Author(s):  
Mathieu Ngouajio ◽  
Jeremy Ernest

Weed control is one of the benefits associated with the use of plastic mulches used for vegetable production. The mulches decrease light transmission and prevent development of most weed species. Plastics chemistry has developed films varying in their ability to reflect, absorb, and transmit light. Laboratory and field experiments were conducted to 1) measure light transmitted through colored mulches, 2) evaluate weed populations under each mulch type, and 3) determine if light transmission could be used as an indicator for weed populations in the field. The polyethylene mulches were black, gray, infrared transmitting brown (IRT-brown), IRT-green, white, and white-on-black (co-extruded white/black). On average, 1%, 2%, 17%, 26%, 42%, and 45% light in the 400 to 1100 nm range was transmitted through the black, white/black, gray, IRT-brown, IRT-green, and white mulches, respectively. In field experiments, density and dry biomass of weeds growing under the mulches were evaluated. The white mulch had the highest weed density with an average of 39.6 and 155.9 plants/m2 in 2001 and 2002, respectively. This was followed by the gray mulch, with 10.4 and 44.1 weed seedlings/m2 in 2001 and 2002, respectively. Weed density was <25 plants/m2 with the other mulches in both years. Weed infestation was correlated with average light transmission for white, black, white/black, and gray mulches. However, both light quantity and quality were necessary to predict weed infestations with the IRT mulches. Weed infestation under the IRT mulches was better estimated when only wave lengths in the photosynthetically active radiation range (PAR; 400 to 700 nm) were considered. Low weed pressure and high light transmission with the IRT mulches would make them appropriate for use in areas where both weed control and soil warming are important factors.


2017 ◽  
Vol 31 (3) ◽  
pp. 455-463 ◽  
Author(s):  
Jayesh B. Samtani ◽  
Jeffrey Derr ◽  
Mikel A. Conway ◽  
Roy D. Flanagan

Field studies were initiated in the 2013-14 and 2014-15 growing seasons to evaluate the potential of soil solarization (SS) treatments for their efficacy on weed control and crop yields and to compare SS to 1,3-dichloropropene (1,3-D)+chloropicrin (Pic) fumigation. Each replicate was a bed with dimension 10.6 m long by 0.8 m wide on top. The center 4.6 m length of each bed, referred to as plots, was used for strawberry plug transplanting and data collection. Treatments included: i) 1,3-D+Pic (39% 1,3-dichloropropene+59.6% chloropicrin) that was shank-fumigated in beds at 157 kg ha−1and covered with VIF on August 30 in both seasons; ii) SS for a 6 wk duration initiated on August 15, 2013 and August 21, 2014 by covering the bed with 1 mil clear polyethylene tarp; iii) SS for a 4wk duration initiated on September 6, 2013 and September 3, 2014; iv) SS 4 wk treatment initiated September 6, 2013 and September 3, 2014 and replaced with black VIF on October 4, 2013 and October 1, 2014 and v) a nontreated control covered with black VIF on October 4, 2013 and October 1, 2014. In both seasons, following completion of the preplant treatments, ‘Chandler’ strawberry was planted in two rows at a 36 cm in-row spacing in plots during the first wk of October. Over both seasons, the 6 wk SS treatment consistently lowered the weed density compared to the nontreated control. Weed density in the 6wk SS treatment was not statistically different from the 4wk SS treatments in the 2013-14 growing season. In both seasons, crop yield in the 4 wk SS was significantly lower than other treatments.


2015 ◽  
Vol 29 (1) ◽  
pp. 56-62 ◽  
Author(s):  
Hassan Karimmojeni ◽  
Ali Reza Yousefi ◽  
Per Kudsk ◽  
Amir Hossein Bazrafshan

Winter sowing of lentil results in higher yields than a spring-sown crop. However, when lentil is winter-sown, the critical period of weed control is extended and might require sequential herbicide management strategies to obtain maximum yields. The efficacy of POST alone or soil applied followed by (fb) POST herbicides or hand weeding were evaluated in 2002 and 2003. Trifluralin (PPI) or pendimethalin (PRE) were applied at planting, and pyridate or oxyfluorfen were applied POST at the three- to four-leaf stage of lentil. The lowest level of weed biomass was recorded with all treatments, except pyridate alone in both years, pendimethalin PRE fb pyridate in 2002, and oxyfluorfen in 2003. Application of pyridate or oxyfluorfen POST alone resulted in lower yields. In 2002, trifluralin PPI or pendimethalin PRE fb one hand weeding or pendimethalin fb pyridate resulted in yields similar to the weed-free treatment. In 2003, yields were similar to the weed-free treatment, except pyridate or oxyfluorfen alone and trifluralin PPI fb oxyfluorfen. Weed species observed in the present study required sequential management to achieve both effective control and maximum lentil yield.


Sign in / Sign up

Export Citation Format

Share Document