Vortex evolution in a round jet

1968 ◽  
Vol 31 (3) ◽  
pp. 435-448 ◽  
Author(s):  
H. A. Becker ◽  
T. A. Massaro
Keyword(s):  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Ring Vortex ◽  
Acoustic Excitation ◽  
Light Scatter ◽  
Turbulent Eddies ◽  
Cylindrical Vortex ◽  
Highly Sensitive ◽  
Pure Tones ◽  
Axisymmetrical Jet

A study has been made of the varicose instability of an axisymmetrical jet with a velocity distribution radially uniform at the nozzle mouth except for a laminar boundary layer at the wall. The evolutionary phenomena of instability, such as the rolling up of the cylindrical vortex layer into ring vortices, the coalescence of ring vortex pairs, and the eventual disintegration into turbulent eddies, have been investigated as a function of the Reynolds number using smoke photography, stroboscopic observation, and the light-scatter technique.Emphasis has been placed on the wavelength with maximum growth rate. The jet is highly sensitive to sound and the effects of several types of acoustic excitation, including pure tones, have been determined.

scholarly journals Optimizing of Microalgae Scenedesmus sp. Biomass Production in Wet Market Wastewater Using Response Surface Methodology

2021 ◽  
Vol 13 (4) ◽  
pp. 2216
Author(s):  
Najeeha Mohd Apandi ◽  
Mimi Suliza Muhamad ◽  
Radin Maya Saphira Radin Mohamed ◽  
Norshuhaila Mohamed Sunar ◽  
Adel Al-Gheethi ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Biomass Yield ◽  
Biomass Productivity ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Aeration Rate ◽  
Composition Analysis ◽  
Wet Market ◽  
Central Composite

The present study aimed to optimize the production of Scenedesmus sp. biomass during the phycoremediation process. The biomass productivity was optimized using face centred central composite design (FCCCD) in response surface methodology (RSM) as a function of two independent variables that included wet market wastewater concentrations (A) with a range of 10% to 75% and aeration rate (B) with a range of 0.02 to 4.0 L/min. The results revealed that the highest biomass productivity (73 mg/L/d) and maximum growth rate (1.19 day−1) was achieved with the 64.26% of (A) and 3.08 L/min of (B). The GC-MS composition analysis of the biomass yield extract revealed that the major compounds are hexadecane (25%), glaucine (16.2%), and phytol (8.33%). The presence of these compounds suggests that WMW has the potential to be used as a production medium for Scenedesmus sp. Biomass, which has several applications in the pharmaceutical and chemical industry.

A note on growth curves of rabbit lines selected on growth rate or litter size

1993 ◽  
Vol 57 (2) ◽  
pp. 332-334 ◽  
Author(s):  
A. Blasco ◽  
E. Gómez
Keyword(s):  
Growth Rate ◽  
Litter Size ◽  
Growth Curves ◽  
Live Weight ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Standard Errors ◽  
Adult Weight ◽  
Weight Growth ◽  
Using Data

Two synthetic lines of rabbits were used in the experiment. Line V, selected on litter size, and line R, selected on growth rate. Ninety-six animals were randomly collected from 48 litters, taking a male and a female each time. Richards and Gompertz growth curves were fitted. Sexual dimorphism appeared in the line V but not in the R. Values for b and k were similar in all curves. Maximum growth rate took place in weeks 7 to 8. A break due to weaning could be observed in weeks 4 to 5. Although there is a remarkable similarity of the values of all the parameters using data from the first 20 weeks only, the higher standard errors on adult weight would make 30 weeks the preferable time to take data for live-weight growth curves.

Reassessment of Maximum Growth Rates for C3 and C4 Crops

1978 ◽  
Vol 14 (1) ◽  
pp. 1-5 ◽  
Author(s):  
J. L. Monteith
Keyword(s):  
Growth Rate ◽  
Growth Rates ◽  
Growing Season ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Crop Growth ◽  
Close Inspection ◽  
Similar Difference ◽  
Photosynthetic Efficiencies

SUMMARYFigures for maximum crop growth rates, reviewed by Gifford (1974), suggest that the productivity of C3 and C4 species is almost indistinguishable. However, close inspection of these figures at source and correspondence with several authors revealed a number of errors. When all unreliable figures were discarded, the maximum growth rate for C3 stands fell in the range 34–39 g m−2 d−1 compared with 50–54 g m−2 d−1 for C4 stands. Maximum growth rates averaged over the whole growing season showed a similar difference: 13 g m−2 d−1 for C3 and 22 g m−2 d−1 for C4. These figures correspond to photosynthetic efficiencies of approximately 1·4 and 2·0%.

Plasma instabilities driven by pickup ions of ring-beam velocity distributions in the outer heliosheath 

2021 ◽  
Author(s):  
Ameneh Mousavi ◽  
Kaijun Liu ◽  
Sina Sadeghzadeh
Keyword(s):  
Magnetic Field ◽  
Maximum Growth ◽  
Dispersion Analysis ◽  
Maximum Growth Rate ◽  
Injection Velocity ◽  
Plasma Instabilities ◽  
Pickup Ions ◽  
Beam Velocity ◽  
Background Magnetic Field ◽  
Hybrid Simulations

<p><span>The stability of the pickup ions in the outer heliosheath has been studied by many researchers because of its relevance to the energetic neutral atom (ENA) ribbon observed by the Interstellar Boundary EXplorer. However, previous studies are primarily limited to pickup ions of near </span><span>90° </span><span>pickup angles, the angle between the pickup ion injection velocity and the background, local interstellar magnetic field. Investigations on pickup ions of smaller pickup angles are still lacking. In this paper, linear kinetic dispersion analysis and hybrid simulations are carried out to examine the plasma instabilities driven by pickup ions of ring-beam velocity distributions at various pickup angles between zero and </span><span>90°</span><span>. </span><span>Parallel propagating waves are studied in the parameter regime where the parallel thermal spread of the pickup ions falls into the Alfvén cyclotron stability gap. </span><span>The linear analysis results and hybrid simulations both show that the fastest growing modes are the right-hand helicity waves propagating in the direction of the background magnetic field, and the maximum growth rate occurs at the pickup angle of </span><span>82°</span><span>. The simulation results further reveal that the saturation level of the fluctuating magnetic fields for pickup angles below </span><span>45° </span><span>is higher than that for pickup angles above </span><span>45°</span><span>. So, the scattering of pickup ions at near zero pickup angles is likely more pronounced than that at near </span><span>90° </span><span>pickup angles</span> .</p>

Interpretation of Experimental Data with Regard to the Activated Sludge Model No.1 and Calibration of the Model for Municipal Wastewater Treatment Plants

1992 ◽  
Vol 25 (6) ◽  
pp. 167-183 ◽  
Author(s):  
H. Siegrist ◽  
M. Tschui
Keyword(s):  
Experimental Data ◽  
Growth Rate ◽  
Activated Sludge ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Municipal Wastewater Treatment ◽  
Activated Sludge Model

The wastewater of the municipal treatment plants Zürich-Werdhölzli (350000 population equivalents), Zürich-Glatt (110000), and Wattwil (20000) have been characterized with regard to the activated sludge model Nr.1 of the IAWPRC task group. Zürich-Glatt and Wattwil are partly nitrifying treatment plants and Zürich-Werdhölzli is fully nitrifying. The mixing characteristics of the aeration tanks at Werdhölzli and Glatt were determined with sodium bromide as a tracer. The experimental data were used to calibrate hydrolysis, heterotrophic growth and nitrification. Problems arising by calibrating hydrolysis of the paniculate material and by measuring oxygen consumption of heterotrophic and nitrifying microorganisms are discussed. For hydrolysis the experimental data indicate first-order kinetics. For nitrification a maximum growth rate of 0.40±0.07 d−1, corresponding to an observed growth rate of 0.26±0.04 d−1 was calculated at 10°C. The half velocity constant found for 12 and 20°C was 2 mg NH4-N/l. The calibrated model was verified with experimental dam of me Zürich-Werdhölzli treatment plant during ammonia shock load.

Dietary Protein Requirements of Fishes — A Reassessment

1987 ◽  
Vol 44 (11) ◽  
pp. 1995-2001 ◽  
Author(s):  
Stephen H. Bowen
Keyword(s):  
Growth Rate ◽  
Dietary Protein ◽  
Protein Concentration ◽  
Trophic Ecology ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Intake Rate ◽  
Protein Requirement ◽  
Fish Physiology ◽  
Protein Retention

It is widely believed that fishes require more dietary protein than other vertebrates. Many aspects of fish physiology, nutrition, and trophic ecology have been interpreted within the context of this high protein requirement. Here, fishes are compared with terrestrial homeotherms in terms of (1) protein requirement for maintenance, (2) relative protein concentration in the diet required for maximum growth rate, (3) protein intake rate required for maximum growth rate, (4) efficiency of protein retention in growth, and (5) weight of growth achieved per weight of protein ingested. The two animal groups compared differ only in relative protein concentration in the diet required for maximum growth rate. This difference is explained in terms of homeotherms' greater requirement for energy and does not reflect absolute differences in protein requirement. The remaining measures of protein requirement suggest that fishes and terrestrial homeotherms are remarkably similar in their use of protein as a nutritional resource. Reinterpretation of the role of protein in fish physiology, nutrition, and trophic ecology is perhaps in order.

Allometric scaling and taxonomic variation in nutrient utilization traits and maximum growth rate of phytoplankton

2012 ◽  
Vol 57 (2) ◽  
pp. 554-566 ◽  
Author(s):  
Kyle F. Edwards ◽  
Mridul K. Thomas ◽  
Christopher A. Klausmeier ◽  
Elena Litchman
Keyword(s):  
Growth Rate ◽  
Allometric Scaling ◽  
Maximum Growth ◽  
Nutrient Utilization ◽  
Maximum Growth Rate

Instability waves on the air–sea interface

1993 ◽  
Vol 248 ◽  
pp. 363-381 ◽  
Author(s):  
G. H. Wheless ◽  
G. T. Csanady
Keyword(s):  
Surface Tension ◽  
Growth Rate ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Surface Velocity ◽  
Instability Waves ◽  
Interface Surface ◽  
Fluid Properties ◽  
Compound Matrix Method ◽  
Order Of Magnitude

We used a compound matrix method to integrate the Orr–Sommerfeld equation in an investigation of short instability waves (λ < 6 cm) on the coupled shear flow at the air–sea interface under suddenly imposed wind (a gust model). The method is robust and fast, so that the effects of external variables on growth rate could easily be explored. As expected from past theoretical studies, the growth rate proved sensitive to air and water viscosity, and to the curvature of the air velocity profile very close to the interface. Surface tension had less influence, growth rate increasing somewhat with decreasing surface tension. Maximum growth rate and minimum wave speed nearly coincided for some combinations of fluid properties, but not for others.The most important new finding is that, contrary to some past order of magnitude estimates made on theoretical grounds, the eigenfunctions at these short wavelengths are confined to a distance of the order of the viscous wave boundary-layer thickness from the interface. Correspondingly, the perturbation vorticity is high, the streamwise surface velocity perturbation in typical cases being five times the orbital velocity of free waves on an undisturbed water surface. The instability waves should therefore be thought of as fundamentally different flow structures from free waves: given their high vorticity, they are akin to incipient turbulent eddies. They may also be expected to break at a much lower steepness than free waves.

scholarly journals Taxonomically-linked growth phenotypes during arsenic stress among arsenic resistant bacteria isolated from soils overlying the Centralia coal seam fire

2017 ◽  
Author(s):  
Taylor K Dunivin ◽  
Justine Miller ◽  
Ashley Shade
Keyword(s):  
Coal Seam ◽  
Arsenic Exposure ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
16S Rrna Genes ◽  
Rrna Genes ◽  
Resistant Bacteria ◽  
Rare Biosphere ◽  
Genes Encoding ◽  
Arsenic Resistant Bacteria

Arsenic (As), a toxic element, has impacted life since early Earth. Thus, microorganisms have evolved many As resistance and tolerance mechanisms to improve their survival outcomes given As exposure. We isolated As resistant bacteria from Centralia, PA, the site of an underground coal seam fire that has been burning since 1962. From a 57.4°C soil collected from a vent above the fire, we isolated 25 unique aerobic arsenic resistant bacteria spanning six genera. We examined their diversity, resistance gene content, transformation abilities, inhibitory concentrations, and growth phenotypes. Although As concentrations were low at the time of soil collection (2.58 ppm), isolates had high minimum inhibitory concentrations (MICs) of arsenate and arsenite (>300 mM and 20 mM respectively), and most isolates were capable of arsenate reduction. We screened isolates (PCR and sequencing) using 12 published primer sets for six As resistance genes (AsRG). Genes encoding arsenate reductase (arsC) and arsenite efflux pumps (arsB, ACR3(2)) were present, and phylogenetic incongruence between 16S rRNA genes and AsRG provided evidence for horizontal gene transfer. A detailed investigation of differences in isolate growth phenotypes across As concentrations (lag time to exponential growth, maximum growth rate, and maximum OD590) showed a relationship with taxonomy, providing information that could help to predict an isolate’s performance given arsenic exposure in situ. Our results suggest that considering taxonomically-linked tolerance and potential for resistance transferability from the rare biosphere will inform strategies for microbiological management and remediation of environmental As and contribute to a larger consideration of As-exposed microbial ecology.

Sign in / Sign up

Export Citation Format

Share Document