The study of multiphase polymer-blend morphologies by HVEM

1996 ◽  
Vol 54 ◽  
pp. 180-181
Author(s):  
T.J. Cavanaugh ◽  
K. Buttle ◽  
J.N. Turner ◽  
E.B. Nauman
Keyword(s):  
Heat Exchanger ◽  
Polymer Blends ◽  
Polymer Blend ◽  
Needle Valve ◽  
Ternary Blends ◽  
Blend Morphology ◽  
The Matrix ◽  
Ternary Polymer ◽  
Impact Modification ◽  
The Impact

Multiphase polymer blends are important in the polymer industry. Most commercial blends consist of two main polymers combined with a third, compatibilizing polymer, typically a graft or block copolymer. The most common examples are those involving the impact modification of a brittle thermoplastic by the microdispersion of a rubber into the matrix. Recently, a model of ternary polymer blends has provided a wealth of morphologies for examination. Even though this model can give an excellent basis for the design of a polymer blend, experimental verification is necessary. A correlation of blend properties such as impact strength with blend morphology must also be made. The focus is to confirm the predicted morphologies in binary and ternary blends using HVEM.The polymer blends were produced by compositional quenching. In this process, the polymers were dissolved in a solvent. The solution was pumped through a heat exchanger and then flashed across a needle valve to remove the solvent.

Soft-shear induced phase-separated nanoparticle string-structures in polymer thin films

2016 ◽  
Vol 186 ◽  
pp. 31-43 ◽  
Author(s):  
Ren Zhang ◽  
Bongjoon Lee ◽  
Michael R. Bockstaller ◽  
Abdullah M. Al-Enizi ◽  
Ahmed Elzatahry ◽  
...  
Keyword(s):  
Thin Film ◽  
Phase Separation ◽  
Polymer Blends ◽  
Polymer Blend ◽  
Polymer Chains ◽  
Translation Speed ◽  
Binary Polymer ◽  
The Matrix ◽  
P Application ◽  
Nanoparticle Structure

Application of shear stress has been shown to unidirectionally orient the microstructures of block copolymers and polymer blends. In the present work, we study the phase separation of a novel nanoparticle (NP)–polymer blend thin film system under shear using a soft-shear dynamic zone annealing (DZA-SS) method. The nanoparticles are densely grafted with polymer chains of chemically dissimilar composition from the matrix polymer, which induces phase separation upon thermal annealing into concentrated nanoparticle domains. We systematically examine the influence of DZA-SS translation speed and thus the effective shear rate on nanoparticle domain elongation and compare this with the counterpart binary polymer blend behavior. Unidirectionally aligned nanoparticle string-domains are fabricated in the presence of soft-shear in confined thin film geometry. We expect this DZA-SS method to be applicable to various NP–polymer blends towards unidirectionally aligned nanoparticle structures, which are important to functional nanoparticle structure fabrication.

Double-stage phase separation in dynamically asymmetric ternary polymer blends

RSC Advances ◽  
2016 ◽  
Vol 6 (94) ◽  
pp. 92104-92114 ◽  
Author(s):  
Chen Kuang ◽  
Sahar Qavi ◽  
Reza Foudazi
Keyword(s):  
Phase Separation ◽  
Polymer Blends ◽  
Methyl Ether ◽  
Ternary Blends ◽  
Vinyl Methyl ◽  
Ethyl Methacrylate ◽  
Vinyl Methyl Ether ◽  
Phase Separation Behavior ◽  
Ternary Polymer ◽  
Separation Behavior

In this work, the phase separation behavior of ternary blends of polystyrene/poly(vinyl methyl ether)/polyisoprene, PS/PVME/PI, and polystyrene/poly(vinyl methyl ether)/poly(ethyl methacrylate), PS/PVME/PEMA are investigated.

Influence of Polymer-Blend Morphology on Charge Transport and Photocurrent Generation in Donor−Acceptor Polymer Blends

Nano Letters ◽  
2006 ◽  
Vol 6 (8) ◽  
pp. 1674-1681 ◽  
Author(s):  
Jarvist M. Frost ◽  
Fabien Cheynis ◽  
Sachetan M. Tuladhar ◽  
Jenny Nelson
Keyword(s):  
Polymer Blends ◽  
Charge Transport ◽  
Polymer Blend ◽  
Photocurrent Generation ◽  
Blend Morphology ◽  
Donor Acceptor

Impact Strength, Flexural Modulus and Wear Rate of PMMA Composites Reinforced by Eggshell Powders

2020 ◽  
Vol 38 (7A) ◽  
pp. 960-966
Author(s):  
Aseel M. Abdullah ◽  
Hussein Jaber ◽  
Hanaa A. Al-Kaisy
Keyword(s):  
Impact Strength ◽  
Wear Rate ◽  
Flexural Modulus ◽  
Matrix Material ◽  
Weight Fraction ◽  
Pure Pmma ◽  
Calcination Process ◽  
The Matrix ◽  
The Impact ◽  
Interface Bond

In the present study, the impact strength, flexural modulus, and wear rate of poly methyl methacrylate (PMMA) with eggshell powder (ESP) composites have been investigated. The PMMA used as a matrix material reinforced with ESP at two different states (including untreated eggshell powder (UTESP) and treated eggshell powder (TESP)). Both UTESP and TESP were mixed with PMMA at different weight fractions ranged from (1-5) wt.%. The results revealed that the mechanical properties of the PMMA/ESP composites were enhanced steadily with increasing eggshell contents. The samples with 5 wt.% of UTESP and TESP additions give the maximum values of impact strength, about twice the value of the pure PMMA sample. The calcination process of eggshells powders gives better properties of the PMMA samples compared with the UTESP at the same weight fraction due to improvements in the interface bond between the matrix and particles. The wear characteristics of the PMMA composites decrease by about 57% with increases the weight fraction of TESP up to 5 wt.%. The flexural modulus values are slightly enhanced by increasing of the ESP contents in the PMMA composites.

scholarly journals The Interactions between Polyphenols and Microorganisms, Especially Gut Microbiota

Antioxidants ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 188
Author(s):  
Małgorzata Makarewicz ◽  
Iwona Drożdż ◽  
Tomasz Tarko ◽  
Aleksandra Duda-Chodak
Keyword(s):  
Intestinal Bacteria ◽  
Research Data ◽  
Bioactive Metabolites ◽  
Human Organism ◽  
Comprehensive Knowledge ◽  
Bidirectional Relationship ◽  
The Matrix ◽  
Intestinal Pathogens ◽  
The Impact

This review presents the comprehensive knowledge about the bidirectional relationship between polyphenols and the gut microbiome. The first part is related to polyphenols’ impacts on various microorganisms, especially bacteria, and their influence on intestinal pathogens. The research data on the mechanisms of polyphenol action were collected together and organized. The impact of various polyphenols groups on intestinal bacteria both on the whole “microbiota” and on particular species, including probiotics, are presented. Moreover, the impact of polyphenols present in food (bound to the matrix) was compared with the purified polyphenols (such as in dietary supplements) as well as polyphenols in the form of derivatives (such as glycosides) with those in the form of aglycones. The second part of the paper discusses in detail the mechanisms (pathways) and the role of bacterial biotransformation of the most important groups of polyphenols, including the production of bioactive metabolites with a significant impact on the human organism (both positive and negative).

scholarly journals Reliability Assessment of a Multi-State HVDC System by Combining Markov and Matrix-Based Methods

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3097
Author(s):  
Roberto Benato ◽  
Antonio Chiarelli ◽  
Sebastian Dambone Sessa
Keyword(s):  
Current System ◽  
Estimation Method ◽  
Reliability Estimation ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Hvdc System ◽  
Critical Elements ◽  
The Matrix ◽  
The Impact

The purpose of this paper is to highlight that, in order to assess the availability of different HVDC cable transmission systems, a more detailed characterization of the cable management significantly affects the availability estimation since the cable represents one of the most critical elements of such systems. The analyzed case study consists of a multi-terminal direct current system based on both line commutated converter and voltage source converter technologies in different configurations, whose availability is computed for different transmitted power capacities. For these analyses, the matrix-based reliability estimation method is exploited together with the Monte Carlo approach and the Markov state space one. This paper shows how reliability analysis requires a deep knowledge of the real installation conditions. The impact of these conditions on the reliability evaluation and the involved benefits are also presented.

scholarly journals Improving ternary blend morphology by adding a conjugated molecule into non-fullerene polymer solar cells

RSC Advances ◽  
2020 ◽  
Vol 10 (71) ◽  
pp. 43508-43513
Author(s):  
Di Zhao ◽  
Pengcheng Jia ◽  
Ling Li ◽  
Yang Tang ◽  
Qiuhong Cui ◽  
...  
Keyword(s):  
Solar Cells ◽  
Fill Factor ◽  
Polymer Solar Cells ◽  
Photovoltaic Performance ◽  
Ternary Blend ◽  
Promising Strategy ◽  
Blend Morphology ◽  
Ternary Polymer ◽  
Conjugated Molecule

The use of ternary polymer solar cells (PSCs) is a promising strategy to enhance photovoltaic performance while improving the fill factor (FF) of a device, but is still a challenge due to the complicated morphology.

scholarly journals Evaluating the role of contracting and expanding rainforest in initiating cycles of speciation across the Isthmus of Panama

2012 ◽  
Vol 279 (1742) ◽  
pp. 3520-3526 ◽  
Author(s):  
Brian Tilston Smith ◽  
Amei Amei ◽  
John Klicka
Keyword(s):  
Bird Species ◽  
Tropical Regions ◽  
Isthmus Of Panama ◽  
Species Pairs ◽  
The Matrix ◽  
High Species Richness ◽  
The Rich ◽  
The Tropics ◽  
The Impact

Climatic and geological changes across time are presumed to have shaped the rich biodiversity of tropical regions. However, the impact climatic drying and subsequent tropical rainforest contraction had on speciation has been controversial because of inconsistent palaeoecological and genetic data. Despite the strong interest in examining the role of climatic change on speciation in the Neotropics there has been few comparative studies, particularly, those that include non-rainforest taxa. We used bird species that inhabit humid or dry habitats that dispersed across the Panamanian Isthmus to characterize temporal and spatial patterns of speciation across this barrier. Here, we show that these two assemblages of birds exhibit temporally different speciation time patterns that supports multiple cycles of speciation. Evidence for these cycles is further corroborated by the finding that both assemblages consist of ‘young’ and ‘old’ species, despite dry habitat species pairs being geographically more distant than pairs of humid habitat species. The matrix of humid and dry habitats in the tropics not only allows for the maintenance of high species richness, but additionally this study suggests that these environments may have promoted speciation. We conclude that differentially expanding and contracting distributions of dry and humid habitats was probably an important contributor to speciation in the tropics.

Toughening of Polypropylene-Ethylene Copolymer with Nanosized CaCO3 and Styrene-Butadiene-Styrene

2007 ◽  
Vol 121-123 ◽  
pp. 1451-1454
Author(s):  
Jian Feng Chen ◽  
Guo Quan Wang ◽  
Xiao Fei Zeng ◽  
Hong Ying Zhao
Keyword(s):  
Average Particle Size ◽  
Average Particle ◽  
Single Screw Extruder ◽  
Roll Mill ◽  
The Matrix ◽  
Ethylene Copolymer ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
The Impact ◽  
Butadiene Styrene

Nanocomposites of nanosized-CaCO3/polypropylene-ethylene copolymer (PPE) and nanosized CaCO3/ PPE/ styrene-butadiene-styrene (SBS) were prepared by using two-roll mill and single screw extruder. The average particle size of nanosized CaCO3 was determined to be about 30 nm. By adding nanosized CaCO3 into PPE matrix, the toughness of the matrix improves significantly. At nanosized CaCO3 content of 12 phr (parts per hundred PPE resin by weight), the impact strength of CaCO3/PPE at room temperature reaches 61.6 KJ/m2, which is 3.02 times that of unfilled PPE matrix. In addition, the synergistic toughening effect of nanosized CaCO3 and SBS particles on PPE matrix was investigated.

Sign in / Sign up

Export Citation Format

Share Document