scholarly journals Depth Profile Analysis of Thin Oxide Layers on Polycrystalline Fe–Cr

2020 ◽  
Vol 26 (1) ◽  
pp. 112-119
Author(s):  
Gerrit Zijlstra ◽  
Tomáš Šamořil ◽  
Hana Tesařová ◽  
Václav Ocelík ◽  
Jeff Th. M. De Hosson

AbstractSurfaces of polycrystalline ferritic Fe–Cr steel with grain sizes of about 13 µm in diameter were investigated with surface sensitive techniques. Thin oxide layers, with a maximum thickness of about 100 nm, were grown by oxidation in air at temperatures up to 450°C and were subsequently characterized using time-of-flight secondary ion mass spectrometry (TOF-SIMS) and atomic force microscopy. Correlative microscopy was applied, which allows for element-specific depth profiles on selected grains with a particular crystal orientation. A strong correlation between the grain orientation and the thickness of the oxide layer was found. The sequence in the oxidation growth rate of ferritic Fe–Cr steel crystal planes is found to be {011} > {111} > {001}, which is unexpectedly opposed to known Fe-based systems. Moreover, for the first time, the Cr/Fe ratio throughout the oxide layer has been determined per grain orientation. A clear order from high to low of {001} > {111} > {011} was detected.

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ayse N. Koyun ◽  
Julia Zakel ◽  
Sven Kayser ◽  
Hartmut Stadler ◽  
Frank N. Keutsch ◽  
...  

AbstractSurface microstructures of bitumen are key sites in atmospheric photo-oxidation leading to changes in the mechanical properties and finally resulting in cracking and rutting of the material. Investigations at the nanoscale remain challenging. Conventional combination of optical microscopy and spectroscopy cannot resolve the submicrostructures due to the Abbe restriction. For the first time, we report here respective surface domains, namely catana, peri and para phases, correlated to distinct molecules using combinations of atomic force microscopy with infrared spectroscopy and with correlative time of flight—secondary ion mass spectrometry. Chemical heterogeneities on the surface lead to selective oxidation due to their varying susceptibility to photo-oxidation. It was found, that highly oxidized compounds, are preferentially situated in the para phase, which are mainly asphaltenes, emphasising their high oxidizability. This is an impressive example how chemical visualization allows elucidation of the submicrostructures and explains their response to reactive oxygen species from the atmosphere.


2008 ◽  
Vol 1068 ◽  
Author(s):  
Hock-Chun Chin ◽  
Ming Zhu ◽  
Ganesh Samudra ◽  
Yee-Chia Yeo

ABSTRACTWe report a novel chemical vapor deposition (CVD) process for epitaxial growth of Ge film on GaAs substrate. The resultant layer exhibits device level quality, as shown by high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, high-resolution X-ray diffraction (HRXRD). In addition, atomic force microscopy (AFM) scanning indicates low RMS surface roughness of 5 Å. Secondary ion mass spectrometry (SIMS) reveals negligible out-diffusion of Ga and As into the Ge epilayer. By employing silane passivation, Ge p-MOSFET with TaN/HfO2 gate stack was fabricated on Ge/GaAs heterostructure for the first time, showing excellent output and pinch-off characteristics. A GaAs channel n-MOSFET was also fabricated, using similar SiH4 treatment during gate stack formation. These results reveal a potential solution to integrate Ge p-channel and GaAs n-channel MOSFET for advanced CMOS applications.


1992 ◽  
Vol 259 ◽  
Author(s):  
B. Garrido ◽  
F. Gessinn ◽  
J.L. Prom ◽  
J.R. Morante ◽  
J. Samitier ◽  
...  

ABSTRACTThe HF/Ethanol cleaning treatment is analyzed in comparison to the HF/H 20 one. The surface analysis is made on <100> silicon wafers with sacrificial oxide layer and silicon wafers with different crystallographic orientation without sacrificial layer. The results deduced from Atomic Force Microscopy, X-ray Photoelectron Spectroscopy and ellipsometry, show that siliconfluorine bonds are related with reactive sites. The structure of the thermally thin oxide layer grown after both cleanings has been analyzed and the electrical measurements show better performance for the HF/Ethanol cleaning.


2011 ◽  
Vol 480-481 ◽  
pp. 1065-1069
Author(s):  
Bin Liu ◽  
Lin Wang ◽  
Yin Zhong Bu ◽  
Sheng Rong Yang ◽  
Jin Qing Wang

Titanium (Ti) and its alloys have been applied in orthopedics as one of the most popular biomedical metallic implant materials. In this work, to enhance the bioactivity, the surface of Ti alloy pre-modified by silane coupling agent and glutaraldehyde was covalently grafted with chitosan (CS) via biochemical multistep self-assembled method. Then, for the first time, the achieved surface was further immobilized with casein phosphopeptides (CPP), which are one group of bioactive peptides released from caseins in the digestive tract and can facilitate the calcium adsorption and usage, to form CS-CPP biocomposite coatings. The structure and composition of the fabricated coatings were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and atomic force microscopy (AFM). As the experimental results indicated, multi-step assembly was successfully performed, and the CS and CPP were assembled onto the Ti alloy surface orderly. It is anticipated that the Ti alloys modified by CS-CPP biocomposite coatings will find potential applications as implant materials in biomedical fields.


Biosensors ◽  
2018 ◽  
Vol 8 (4) ◽  
pp. 118
Author(s):  
Rodica Ionescu ◽  
Raphael Selon ◽  
Nicolas Pocholle ◽  
Lan Zhou ◽  
Anna Rumyantseva ◽  
...  

Conductive indium-tin oxide (ITO) and non-conductive glass substrates were successfully modified with embedded gold nanoparticles (AuNPs) formed by controlled thermal annealing at 550 °C for 8 h in a preselected oven. The authors characterized the formation of AuNPs using two microscopic techniques: scanning electron microscopy (SEM) and atomic force microscopy (AFM). The analytical performances of the nanostructured-glasses were compared regarding biosensing of Hsp70, an ATP-driven molecular chaperone. In this work, the human heat-shock protein (Hsp70), was chosen as a model biomarker of body stress disorders for microwave spectroscopic investigations. It was found that microwave screening at 4 GHz allowed for the first time the detection of 12 ng/µL/cm2 of Hsp70.


Author(s):  
Yu-rong Zhu ◽  
Dan Zhang ◽  
Yang Gan ◽  
Fei-hu Zhang

<p>Silicon carbide (SiC) single crystals, along with sapphire and silicon, are one of most important substrates for high-brightness LED fabrications. Owing to extremely high hardness (Mohs&rsquo; scale of 9.5) and chemical inertness, the polishing rate of SiC with conventional chemical mechanical polishing (CMP) methods is not high, and surface scratches are also inevitable because of using slurry containing hard abrasives such as silica particles. Here artemisinin (Qinghaosu) crystals, very soft molecular solids, were found, for the first time to the best of our knowledge, to effectively polish SiC wafers even in pure water as demonstrated by proof-of-concept scratching experiments using atomic force microscopy (AFM). The underlying mechanism is attributed to activated oxidation of SiC by mechanically released reactive &middot;OH free radicals from the endoperoxide bridges. The preliminary results reported here have important implications for developing novel alternative green and scratch-free polishing methods for hard-brittle substrates including SiC and others.</p>


Minerals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 371 ◽  
Author(s):  
Ying Gao ◽  
Yuexin Han ◽  
Wenbo Li

The flotation behaviors of diatomite and albite using dodecylamine (DDA) as a collector were investigated and compared. The pure mineral flotation results indicate that the flotability difference between albite and diatomite is above 87% at pH 5.5 to 10.5. The recovery of albite improves with increasing DDA dosage at pH 5.5 to 10.5. In the same pH range, diatomite has weaker flotability than albite, particularly in alkaline pH pulp. Zeta potential measurements indicate that diatomite has a higher negative surface charge than albite at pH 7 to 12, DDA interacts strongly with albite and weakly with diatomite. Thus, DDA preferentially absorbs on albite surface rather than diatomite under alkaline conditions. Fourier transform infrared spectra (FTIR) indicate that the amount of DDA adsorbed to albite is greater than that adsorbed to diatomite, under the same conditions. The adsorption of DDA on the surface of diatomite is investigated by using atomic force microscopy (AFM) for the first time. The adsorption of the collector DDA on the surface of albite per unit area is greater than that on diatomite. This accounts for the lower recovery of diatomite than that of albite.


Sign in / Sign up

Export Citation Format

Share Document