Manganese in Diagnostics: A Preformulatory Study

This investigation aims to find lipid-based nanosystems to be used as tools to deliver manganese for diagnostic purposes in multimodal imaging techniques. In particular, the study describes the production and characterization of aqueous dispersions of anionic liposomes as delivery systems for two model manganese-based compounds, namely manganese chloride and manganese acetylacetonate. Negatively charged liposomes were obtained using four different anionic surfactants, namely sodium docusate (SD), N-lauroylsarcosine (NLS), Protelan AG8 (PAG) and sodium lauroyl lactylate (SLL). Liposomes were produced by the direct hydration method followed by extrusion and characterized in terms of size, polydispersity, surface charge and stability over time. After extrusion, liposomes are homogeneous and monodispersed with an average diameter not exceeding 200 nm and a negative surface charge as confirmed by ζ potential measurement. Moreover, as indicated by atomic absorption spectroscopy analyses, the loading of manganese-based compounds was almost quantitative. Liposomes containing NLS or SLL were the most stable over time and the presence of manganese-based compounds did not affect their size distribution. Liposomes containing PAG and SD were instable and therefore discarded. The in vitro cytotoxicity of the selected anionic liposomes was evaluated by MTT assay on human keratinocyte. The obtained results highlighted that the toxicity of the formulations is dose dependent.

Investigation of the Characteristics and Antibacterial Activity of Polymer-Modified Copper Oxide Nanoparticles

The proliferation of drug-resistant pathogens continues to increase, giving rise to serious public health concerns. Many researchers have formulated metal oxide nanoparticles for use as novel antibacterial agents. In the present study, copper oxide (CuO) was synthesized by simple hydrothermal synthesis, and doping was performed to introduce different polymers onto the NP surface for bacteriostasis optimization. The polymer-modified CuO NPs were analyzed further with XRD, FTIR, TEM, DLS and zeta potential to study their morphology, size, and the charge of the substrate. The results indicate that polymer-modified CuO NPs had a significantly higher bacteriostatic rate than unmodified CuO NPs. In particular, polydopamine (PDA)-modified CuO (CuO-PDA) NPs, which carry a weakly negative surface charge, exhibited excellent antibacterial effects, with a bacteriostatic rate of up to 85.8 ± 0.2% within 3 h. When compared to other polymer-modified CuO NPs, CuO-PDA NPs exhibited superior bacteriostatic activity due to their smaller size, surface charge, and favorable van der Waals interactions. This may be attributed to the fact that the CuO-PDA NPs had relatively lipophilic structures at pH 7.4, which increased their affinity for the lipopolysaccharide-containing outer membrane of the Gram-negative bacterium Escherichia coli.

Introducing Negatively Charged Residues on the Surface of Fetal Hemoglobin Improves Yields in Escherichia coli

Fetal hemoglobin (HbF) has been developed into an important alternative protein for oxygen therapeutics. Such applications require extensive amounts of proteins, which only can be achieved via recombinant means. However, the expression of vertebrate hemoglobins in heterologous hosts is far from trivial. There are several issues that need to be dealt with. These include, among others, the solubility of the globin chains, equimolar expression of the globin chains, and access to high levels of free heme. In this study, we examined the impact of introducing negative charges on the surface of HbF. Three different HbF mutants were examined, carrying four additional negative charges on the α-subunit (rHbFα4), two additional negative charges on the γ-subunit (rHbFγ2) or a combination of these (rHbFα4/γ2). The increase in negative surface charge in these HbF mutants required the development of an alternate initial capture step in the downstream purification procedures. For the rHbFα4 mutant, we achieved a significantly enhanced yield of purified HbF with no apparent adverse effects on Hb functionality. However, the presence of non-functional Hb portions in the rHbFγ2 and rHbFα4/γ2 samples reduced the yields significantly for those mutants and indicated an imbalanced expression/association of globin chains. Furthermore, the autoxidation studies indicated that the rHbFγ2 and rHbFα4/γ2 mutants also were less oxidatively stable than rHbFα4 and wt rHbF. The study further verified the need for an improved flask culture protocol by optimizing cultivation parameters to enable yield-improving qualities of surface-located mutations.

Application of high hydrophilic antifouling nanofiltration membranes embedded with mesoporous carbon based nanoparticles for efficient dye removal and salt rejection

In this research, the application of mesoporous carbon CMK-3 and modified CMK-3 (M-CMK-3) to improve antifouling and rejection rate of polyethersulfone NF membrane was assessed. CMK-3 was modified with H-acid to increase hydrophilic characteristics of CMK-3. The synthesized CMK-3 and modified CMK-3 membranes exhibited a high pure water flux and also flux recovery ratio (up to 95%) compared with bare NF membrane. Also, the membranes with optimum additive loading (0.1wt%) of CMK-3 and M-CMK-3 were compared to reject different salts and dyes. From the obtained results, the membrane embedded with M-CMK-3 showed higher rejection rate rather than bare NF membrane (up to 95 % for Na2SO4and 64% for CaCl2) and also the flux permeability was increased from 6.44 for bare NF membrane to 20.11 kg/m2.h for the membrane embedded with M-CMK-3. A higher rejection data for different dyes under different pH conditions (up to 90%) was reported for the synthesized membrane embedded with M-CMK-3. After all, from the obtained data, M-CMK-3 with higher negative surface charge presented a higher performance to remove salts and dyes. This research was aimed to develop cost-effective NF membranes with high antifouling properties and super high filtration capacity for removing dyes and salts from wastewaters.

Morphomolecular Characterization of Serum Nanovesicles From Microbiomes Differentiates Stable and Infarcted Atherosclerotic Patients

Microbial communities are considered decisive for maintaining a healthy situation or for determining diseases. Acute myocardial infarction (AMI) is an important complication of atherosclerosis caused by the rupture of atheroma plaques containing proinflammatory cytokines, reactive oxygen species, oxidized low-density lipoproteins (oxLDL), damaged proteins, lipids, and DNA, a microenvironment compatible with a pathogenic microbial community. Previously, we found that archaeal DNA-positive infectious microvesicles (iMVs) were detected in vulnerable plaques and in the sera of Chagas disease patients with heart failure. Now, we characterize and quantify the levels of serum microbiome extracellular vesicles through their size and content using morphomolecular techniques to differentiate clinical outcomes in coronary artery disease (CAD). We detected increased numbers of large iMVs (0.8–1.34 nm) with highly negative surface charge that were positive for archaeal DNA, Mycoplasma pneumoniae antigens and MMP9 in the sera of severe AMI patients, strongly favoring our hypothesis that pathogenic archaea may play a role in the worst outcomes of atherosclerosis. The highest numbers of EVs <100 nm (exosomes) and MVs from 100 to 200 nm in the stable atherosclerotic and control healthy groups compared with the AMI groups were indicative that these EVs are protective, entrapping and degrading infectious antigens and active MMP9 and protect against the development of plaque rupture.Conclusion: A microbiome with pathogenic archaea is associated with high numbers of serum iMVs in AMI with the worst prognosis. This pioneering work demonstrates that the morphomolecular characterization and quantification of iEVs in serum may constitute a promising serum prognostic biomarker in CAD.

Hyaluronan/Diethylaminoethyl Chitosan Polyelectrolyte Complexes as Carriers for Improved Colistin Delivery

Improving the therapeutic characteristics of antibiotics is an effective strategy for controlling the growth of multidrug-resistant Gram-negative microorganisms. The purpose of this study was to develop a colistin (CT) delivery system based on hyaluronic acid (HA) and the water-soluble cationic chitosan derivative, diethylaminoethyl chitosan (DEAECS). The CT delivery system was a polyelectrolyte complex (PEC) obtained by interpolymeric interactions between the HA polyanion and the DEAECS polycation, with simultaneous inclusion of positively charged CT molecules into the resulting complex. The developed PEC had a hydrodynamic diameter of 210–250 nm and a negative surface charge (ζ-potential = −19 mV); the encapsulation and loading efficiencies were 100 and 16.7%, respectively. The developed CT delivery systems were characterized by modified release (30–40% and 85–90% of CT released in 15 and 60 min, respectively) compared to pure CT (100% CT released in 15 min). In vitro experiments showed that the encapsulation of CT in polysaccharide carriers did not reduce its antimicrobial activity, as the minimum inhibitory concentrations against Pseudomonas aeruginosa of both encapsulated CT and pure CT were 1 μg/mL.

Turkestan Cockroaches Avoid Entering a Static Electric Field upon Perceiving an Attractive Force Applied to Antennae Inserted into the Field

This study analysed the mechanism of avoidance behaviour by adult Turkestan cockroaches (Shelfordella lateralis Walker) in response to a static electric field (S-EF) formed in the space between a negatively charged polyvinyl chloride-insulated iron plate (N-PIP) and a grounded metal net (G-MN). The negative surface charge supplied to the iron plate by a voltage generator caused the G-MN to polarise positively via electrostatic induction. In the S-EF, the negative charge of the N-PIP created a repulsive force that pushed free electrons in the field toward the ground via the G-MN. When insects released in the space surrounded by the S-EF inserted their antennae into the S-EF, they pulled them back reflexively and moved backward. The analysis indicated that an electric current flowed transiently toward the ground when an insect inserted its antennae into the S-EF. The insect became positively charged via this discharge and was attracted to the opposite pole (N-PIP). In response to this attractive force, the insect pulled its antennae back quickly. The positive electrification caused by the removal of free electrons from the antenna tip triggered the avoidance behaviour.

ROS-responsive biomimetic nanoparticles for potential application in targeted anti-atherosclerosis

The development of nanomedicines provides new opportunities for the treatment of atherosclerosis (AS) due to their great advantages such as the improved drug solubility, enhanced bioavailability and reduced side effects. Despite these advantages, nanomedicines are still facing some challenges. The problems remain in the short circulation life, lack of specific targeting and poor drug release controllability. In order to overcome the shortages of conventional nanomedicines, the combination of biomimetic strategy with smart nanoagents has been proposed. In light with the high reactive oxygen species (ROS) level in AS microenvironment and the fact that macrophages play a critical role in the pathogenesis of AS, we fabricated ROS-responsive biomimetic nanoparticles (NPs), which camouflaged macrophage membrane (MM) on ROS-responsive NPs loaded with rapamycin (RNPs) for potential application in AS therapy. The resulting ROS-responsive biomimetic NPs (MM/RNPs) exhibited favorable hydrodynamic size with negative surface charge, retained the functional proteins from MM, and showed ROS-responsive drug release. Because of the biomimetic camouflaging on surface, MM/RNPs could effectively escape from macrophages uptake and target to inflammatory endothelial cells. Meanwhile, MM/RNPs could inhibit the proliferation of macrophages and smooth muscle cells in vitro. Furthermore, the MM-coated NPs were found to be nontoxic in both cytotoxicity assay and in vivo toxicity evaluation. Consequently, these results demonstrated that MM/RNPs could be a potential candidate of drug delivery system for safe and effective anti-AS applications.

Nanoemulsions for the Encapsulation of Hydrophobic Actives

This work analyzes the dispersion of two highly hydrophobic actives, (9Z)-N-(1,3-dihydroxyoctadecan-2-yl)octadec-9-enamide (ceramidelike molecule) and 2,6-diamino-4-(piperidin-1-yl)pyrimidine 1-oxide (minoxidil), using oil-in-water nanoemulsions with the aim of preparing stable and safe aqueous-based formulations that can be exploited for enhancing the penetration of active compounds through cosmetic substrates. Stable nanoemulsions with a droplet size in the nanometric range (around 200 nm) and a negative surface charge were prepared. It was possible to prepare formulations containing up to 2 w/w% of ceramide-like molecules and more than 10 w/w% of minoxidil incorporated within the oil droplets. This emulsions evidenced a good long-term stability, without any apparent modification for several weeks. Despite the fact that this work is limited to optimize the incorporation of the actives within the nanoemulsion-like formulations, it demonstrated that nanoemulsions should be considered as a very promising tool for enhancing the distribution and availability of hydrophobic molecules with technological interest.

Synthesis of Poly(Malic Acid) Derivatives End-Functionalized with Peptides and Preparation of Biocompatible Nanoparticles to Target Hepatoma Cells

Recently, short synthetic peptides have gained interest as targeting agents in the design of site-specific nanomedicines. In this context, our work aimed at developing new tools for the diagnosis and/or therapy of hepatocellular carcinoma (HCC) by grafting the hepatotropic George Baker (GB) virus A (GBVA10-9) and Plasmodium circumsporozoite protein (CPB)-derived peptides to the biocompatible poly(benzyl malate), PMLABe. We successfully synthesized PMLABe derivatives end-functionalized with peptides GBVA10-9, CPB, and their corresponding scrambled peptides through a thiol/maleimide reaction. The corresponding nanoparticles (NPs), varying by the nature of the peptide (GBVA10-9, CPB, and their scrambled peptides) and the absence or presence of poly(ethylene glycol) were also successfully formulated using nanoprecipitation technique. NPs were further characterized by dynamic light scattering (DLS), electrophoretic light scattering (ELS) and transmission electron microscopy (TEM), highlighting a diameter lower than 150 nm, a negative surface charge, and a more or less spherical shape. Moreover, a fluorescent probe (DiD Oil) has been encapsulated during the nanoprecipitation process. Finally, preliminary in vitro internalisation assays using HepaRG hepatoma cells demonstrated that CPB peptide-functionalized PMLABe NPs were efficiently internalized by endocytosis, and that such nanoobjects may be promising drug delivery systems for the theranostics of HCC.