Zeta Potential and Colloidal Stability Predictions for Inorganic Nanoparticle Dispersions: Effects of Experimental Conditions and Electrokinetic Models on the Interpretation of Results

Langmuir ◽  
2021 ◽  
Author(s):  
Daniel José Pochapski ◽  
Caio Carvalho dos Santos ◽  
Gabriel Wosiak Leite ◽  
Sandra Helena Pulcinelli ◽  
Celso Valentim Santilli
Keyword(s):  
Zeta Potential ◽  
Colloidal Stability ◽  
Experimental Conditions ◽  
Inorganic Nanoparticle ◽  
Nanoparticle Dispersions ◽  
Interpretation Of Results

scholarly journals Development and Validation of Optical Methods for Zeta Potential Determination of Silica and Polystyrene Particles in Aqueous Suspensions

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 290
Author(s):  
Yannic Ramaye ◽  
Marta Dabrio ◽  
Gert Roebben ◽  
Vikram Kestens
Keyword(s):  
Zeta Potential ◽  
Particle Tracking ◽  
Colloidal Stability ◽  
Optical Methods ◽  
Intermediate Precision ◽  
Electrophoretic Light Scattering ◽  
Measurement Uncertainties ◽  
Development And Validation ◽  
Direct Implementation

Zeta potential is frequently used to examine the colloidal stability of particles and macromolecules in liquids. Recently, it has been suggested that zeta potential can also play an important role for grouping and read-across of nanoforms in a regulatory context. Although the measurement of zeta potential is well established, only little information is reported on key metrological principles such as validation and measurement uncertainties. This contribution presents the results of an in-house validation of the commonly used electrophoretic light scattering (ELS) and the relatively new particle tracking analysis (PTA) methods. The performance characteristics were assessed by analyzing silica and polystyrene reference materials. The ELS and PTA methods are robust and have particle mass working ranges of 0.003 mg/kg to 30 g/kg and 0.03 mg/kg to 1.5 mg/kg, respectively. Despite different measurement principles, both methods exhibit similar uncertainties for repeatability (2%), intermediate precision (3%) and trueness (4%). These results confirm that the developed methods can accurately measure the zeta potential of silica and polystyrene particles and can be transferred to other laboratories that analyze similar types of samples. If direct implementation is impossible, the elaborated methodologies may serve as a guide to help laboratories validating their own methods.

scholarly journals Effect of Tetramethylammonium Hydroxide on Nucleation, Surface Modification and Growth of Magnetic Nanoparticles

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Ângela L. Andrade ◽  
José D. Fabris ◽  
José D. Ardisson ◽  
Manuel A. Valente ◽  
José M. F. Ferreira
Keyword(s):  
Zeta Potential ◽  
Magnetite Nanoparticles ◽  
Heat Dissipation ◽  
Tetramethylammonium Hydroxide ◽  
Precipitation Method ◽  
Attenuated Total Reflectance ◽  
X Ray Diffraction ◽  
Experimental Conditions ◽  
Transmission Electron ◽  
Magnetite Particles

Nanoparticles of magnetite (Fe3O4) were obtained by reacting ferric chloride with sodium sulphite, through the reduction-precipitation method. The effects of adding tetramethylammonium hydroxide (TMAOH) during or after the precipitation of the iron oxide were studied in an attempt to obtain well-dispersed magnetite nanoparticles. Accordingly, the following experimental conditions were tested: (i) precipitation in absence of TMAOH (sample Mt), (ii) the same as (i) after peptizing with TMAOH (Mt1), (iii) TMAOH added to the reaction mixture during the precipitation of magnetite (Mt2). Analyses with transmission electron microscopy (TEM), X-ray diffraction, Mössbauer spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), zeta potential, and magnetization measurements up to 2.5 T revealed that magnetite was normally formed also in the medium containing TMAOH. The degree of particles agglomeration was monitored with laser diffraction and technique and inspection of TEM images. The relative contributions of Néel and Brownian relaxations on the magnetic heat dissipation were studied by investigating the ability of suspensions of these magnetite nanoparticles to release heat in aqueous and in hydrogel media. Based on ATR-FTIR and zeta potential data, it is suggested that the surfaces of the synthesized magnetite particles treated with TMAOH become coated with (CH3)4N+cations.

Ampicillin-augmented silver nanoparticles for synergistic antimicrobial response: A promising therapeutic approach

2021 ◽  
Vol 22 ◽  
Author(s):  
Kashan Khan ◽  
Mohd Aamir Qureshi ◽  
Ameer Azam ◽  
Moinuddin ◽  
Javed Musarrat ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Silver Nanoparticles ◽  
Zeta Potential ◽  
Bacterial Infections ◽  
Colloidal Stability ◽  
Resistant Bacteria ◽  
Antimicrobial Drugs ◽  
Vis Spectroscopy ◽  
Microbial Infections ◽  
Ft Ir

Aims: Globally Scientists are working to find more efficient antimicrobial drugs to treat microbial infections and kill drug-resistant bacteria. Background: Despite the availability of numerous antimicrobial drugs bacterial infections still poses a serious threat to global health. Due to a constant decline in the effectiveness of antibiotics owing to their repeated exposure as well as shortlasting antimicrobial activity, led to the demand for developing novel therapeutic agents capable of controlling microbial infections. Objective: In this study, we report antimicrobial activity of chemically synthesized silver nanoparticles (cAgNPs) augmented with ampicillin (amp) in order to increase antimicrobial response against Escherichia coli (gram –ve), Staphylococcus aureus (gram +ve) and Streptococcus mutans (gram +ve). Methods: Nanostructure, colloidal stability, morphology and size of cAgNPs before and after functionalization were explored by UV-vis spectroscopy, FT-IR, zeta potential and TEM. The formation and functionalization of cAgNPs was confirmed from UV-vis spectroscopy and FT-IR patterns. From TEM the average sizes of cAgNPs and cAgNP-amp were found to be 13 and 7.8 nm respectively, and change in colloidal stability after augmentation was confirmed from zeta potential values. The antimicrobial efficacies of cAgNP-amp and cAgNPs against E. coli S. aureus and S. mutans were studied by determining minimum inhibitory concentrations (MICs), zone of inhibition, assessment of viable and non-viable bacterial cells and quantitative assessment of biofilm. Results & Discussion: Our results revealed cAgNP-amp to be highly bactericidal compared to cAgNPs or amp alone. The nano-toxicity studies indicated cAgNP-amp to be less toxic compared to cAgNPs alone. Results: This study manifested that cAgNPs show synergistic antimicrobial effect when they get functionalized with amp suggesting their application in curing long-term bacterial infections.

scholarly journals Surface Response Based Modeling of Liposome Characteristics in a Periodic Disturbance Mixer

Micromachines ◽  
2020 ◽  
Vol 11 (3) ◽  
pp. 235 ◽  
Author(s):  
Rubén R. López ◽  
Ixchel Ocampo ◽  
Luz-María Sánchez ◽  
Anas Alazzam ◽  
Karl-F. Bergeron ◽  
...  
Keyword(s):  
Zeta Potential ◽  
Flow Rate ◽  
Size Range ◽  
Physicochemical Characteristics ◽  
Flow Rate Ratio ◽  
Total Flow ◽  
Experimental Conditions ◽  
Periodic Disturbance ◽  
Liposome Size ◽  
The Relationship

Liposomes nanoparticles (LNPs) are vesicles that encapsulate drugs, genes, and imaging labels for advanced delivery applications. Control and tuning liposome physicochemical characteristics such as size, size distribution, and zeta potential are crucial for their functionality. Liposome production using micromixers has shown better control over liposome characteristics compared with classical approaches. In this work, we used our own designed and fabricated Periodic Disturbance Micromixer (PDM). We used Design of Experiments (DoE) and Response Surface Methodology (RSM) to statistically model the relationship between the Total Flow Rate (TFR) and Flow Rate Ratio (FRR) and the resulting liposomes physicochemical characteristics. TFR and FRR effectively control liposome size in the range from 52 nm to 200 nm. In contrast, no significant effect was observed for the TFR on the liposomes Polydispersity Index (PDI); conversely, FRR around 2.6 was found to be a threshold between highly monodisperse and low polydispersed populations. Moreover, it was shown that the zeta potential is independent of TFR and FRR. The developed model presented on the paper enables to pre-establish the experimental conditions under which LNPs would likely be produced within a specified size range. Hence, the model utility was demonstrated by showing that LNPs were produced under such conditions.

Photocatalytic Cr(VI) Reduction by Anodized TiO2

2008 ◽  
Vol 569 ◽  
pp. 221-224 ◽  
Author(s):  
Jae Kyung Yoon ◽  
Eun Jung Shim ◽  
Jin Wook Ha ◽  
Hyun Ku Joo
Keyword(s):  
Aqueous Solution ◽  
Hydrogen Production ◽  
Zeta Potential ◽  
Environmental Remediation ◽  
Annealing Temperature ◽  
Experimental Conditions ◽  
Novel Technique ◽  
Reduction Efficiency ◽  
Lower Annealing Temperature ◽  
Acidic Conditions

In this study, immobilized nanotubular TiO2 is used to reduce toxic Cr(VI) to non toxic Cr(III) in aqueous solution under UV irradiation. To overcome the limitation of powder TiO2, a novel technique of immobilization based on anodization was applied and investigated under various experimental conditions. Among the samples tested under same anodizing condition, the nanotubular TiO2 annealed at 450 oC and 550 oC showed higher reduction efficiencies of Cr(VI). In addition, the surface characterizations (zeta potential, XRD and SEM) of these samples proved that the Cr(VI) reduction efficiency was higher under acidic conditions and at a lower annealing temperature. Through this study, it was concluded that anodized TiO2 has the potential to be useful technology for environmental remediation as well as hydrogen production in water.

Thin Films of Europium (III) Doped-TiO2 Prepared by Electrophoretic Deposition from Nanoparticulate Sols

2012 ◽  
Vol 507 ◽  
pp. 73-77 ◽  
Author(s):  
Mario Borlaf ◽  
Maria Teresa Colomer ◽  
Howard Titzel ◽  
James H. Dickerson ◽  
Rodrigo Moreno
Keyword(s):  
Thin Films ◽  
Zeta Potential ◽  
Electrophoretic Deposition ◽  
Colloidal Stability ◽  
Sol Gel ◽  
Complete Characterization ◽  
Constant Current ◽  
Molar Ratio ◽  
Versatile Technique ◽  
The Stability

Colloidal sol-gel is a common method used for the preparation of stable and homogeneous sols and thin films. The nanoparticulate sols can be easily deposited by EPD, which is a versatile technique for producing denser and thicker coatings than those produced by other techniques like dipping. A complete characterization of the sols, such as colloidal stability and electrophoretic mobility, which can be determined through zeta potential measurements, as well as the influence of deflocculants in the surface properties, is needed before using electrophoretic deposition. In this work, we have prepared sols of TiO2with an alkoxide:water molar ratio of 50:1 and Eu (III) doped-TiO2(2 mole % Eu (III)) using as precursors titanium (IV) isopropoxide and europium (III) acetate hydrate, respectively. The stability of the particulate sols was studied in terms of conductivity, zeta potential and viscosity evolution. Anatase stable sols, after peptization and without the use of any additive, were deposited on stainless steel substrates by electrophoretic deposition under both constant current and constant voltage conditions. Using different intensities and deposition times we have obtained thin films with different features (thicknesses and morphology) and different optical properties. The presence of europium (III) increases particle size, viscosity and peptization time and decreases the band gap of TiO2.

scholarly journals Characterization and Nanofluid Stability of CoFe2O4-APTES and CoFe2O4-PVA Nanoparticles

2020 ◽  
Vol 78 (1) ◽  
pp. 79-87
Author(s):  
Anis Arisa Roslan ◽  
Hasnah Mohd Zaid ◽  
Siti Nur Azella Zaine ◽  
Mursyidah Umar ◽  
Beh Hoe Guan
Keyword(s):  
Surface Modification ◽  
Zeta Potential ◽  
Performance Studies ◽  
Colloidal Stability ◽  
Amino Silane ◽  
Cobalt Iron Oxide ◽  
One Step ◽  
The Stability ◽  
Surface Modified ◽  
Surface Modified Nanoparticles

Nanofluid contains nanoparticles that enhanced the property of the base fluid. However, the separating layer between the nanoparticles and base fluids may interfere the nanofluids performance. Studies have been made that surface modification of nanoparticles may improve the dispersion of nanoparticles in base fluids. This paper reports the study of the colloidal stability of surface modified nanoparticles using a polymer and an amino-silane. The nanoparticles were prepared by one-step and two-step methods using cobalt iron oxide nanoparticles with brine solution and deionized water as the base fluids. Functionalization by surface modification of the nanoparticles to enhance the nanofluids stability was carried out using (3-aminopropyl) triethoxysilane (APTES) and polyvinyl alcohol (PVA). Characterization using Fourier Transform Infrared (FTIR), Field Emission Scanning Electron Microscope (FESEM) and X-ray Powder Diffraction (XRD) were performed to study the functionality and morphology of the synthesized nanoparticles. The extra IR peaks such as Si-O-Si at 1063 cm-1 for CoFe2O4-APTES and C=O at 1742 cm-1 for CoFe2O4-PVA showed that there are additional elements in the cobalt ferrite due to functionalization. The size of synthesized CoFe2O4-APTES ranged between 15.99 nm to 26.89 nm while CoFe2O4-PVA is from 25.70 nm to 54.16 nm. The stability of the nanofluid were determined via zeta potential measurements. CoFe2O4-APTES nanofluid has zeta potential of -35.7 mV compared to CoFe2O4-PVA at -15.5 mV.

Exhibitive Nano-to-Micron Scale Sedimentation Dynamics of Colloidal Formulations Through Direct Visualization

2020 ◽  
Author(s):  
Shalmali Bapat ◽  
Doris Segets
Keyword(s):  
Fuel Cell ◽  
Colloidal Stability ◽  
Silica Nanoparticle ◽  
Data Interpretation ◽  
Colloidal Systems ◽  
Time Resolved ◽  
Knowledge Based ◽  
Sedimentation Behavior ◽  
Nanoparticle Dispersions ◽  
Analytical Centrifugation

The study of sedimentation behavior of nanoparticle dispersions is important for revealing particle size and colloidal stability characteristics. Quantitative appraisal of real-world colloidal systems in their native state, is key for replacing prevailing empiricism in formulation science by knowledge-based design. Herein, we choose fuel cell inks as one case-example amongst many other possibilities to present a new visualization technique, called <i>Transmittogram</i>. This technique readily depicts the time-resolved settling behavior of solid-liquid dispersions, measured by analytical centrifugation (AC). Although AC enables the causal examination of agglomeration, settling, and creaming behavior of dispersions, along with its consequent effect on structure formation and product properties, the understanding of the main transmission readout is often non-intuitive and complex. Transmittograms are, therefore, the missing link for straightforward data interpretation. First, we illustrate the utility of transmittogram analysis using model silica nanoparticle systems and further validate it against known characteristics of the system. Then, we demonstrate the application of transmittograms to characterize fuel cell inks, showing the strength of the approach in deconvoluting and distilling information to the reader. Finally, we discuss the potential of the technique for routine analysis using analytical centrifugation.<br>

Sign in / Sign up

Export Citation Format

Share Document