scholarly journals The impact of alloying on defect-free nanoparticles exhibiting softer but tougher behavior

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Anuj Bisht ◽  
Raj Kiran Koju ◽  
Yuanshen Qi ◽  
James Hickman ◽  
Yuri Mishin ◽  
...  
Keyword(s):  
High Strength ◽  
Dislocation Nucleation ◽  
Atomistic Simulations ◽  
Physical Metallurgy ◽  
Ni Nanoparticles ◽  
Particle Deformation ◽  
Theoretical Limit ◽  
Solution Hardening ◽  
Softening Effect ◽  
The Impact

AbstractThe classic paradigm of physical metallurgy is that the addition of alloying elements to metals increases their strength. It is less known if the solution-hardening can occur in nano-scale objects, and it is totally unknown how alloying can impact the strength of defect-free faceted nanoparticles. Purely metallic defect-free nanoparticles exhibit an ultra-high strength approaching the theoretical limit. Tested in compression, they deform elastically until the nucleation of the first dislocation, after which they collapse into a pancake shape. Here, we show by experiments and atomistic simulations that the alloying of Ni nanoparticles with Co reduces their ultimate strength. This counter-intuitive solution-softening effect is explained by solute-induced local spatial variations of the resolved shear stress, causing premature dislocation nucleation. The subsequent particle deformation requires more work, making it tougher. The emerging compromise between strength and toughness makes alloy nanoparticles promising candidates for applications.

scholarly journals Softer but tougher: The impact of alloying on defect-free nanoparticles

2021 ◽  
Author(s):  
Anuj Bisht ◽  
Raj koju ◽  
Yuanshen Qi ◽  
James Hickman ◽  
Yuri Mishin ◽  
...  
Keyword(s):  
High Strength ◽  
Dislocation Nucleation ◽  
Atomistic Simulations ◽  
Physical Metallurgy ◽  
Alloy Nanoparticles ◽  
Ni Nanoparticles ◽  
Theoretical Limit ◽  
Solution Hardening ◽  
Softening Effect ◽  
The Impact

Abstract The classic paradigm of physical metallurgy is that the addition of alloying elements to metals increases their strength. It is less known if the solution-hardening can occur in nano-scale objects, and it is totally unknown how alloying can impact the strength of defect-free faceted nanoparticles. Purely metallic defect-free nanoparticles exhibit an ultra-high strength approaching the theoretical limit. Tested in compression, they deform elastically until the nucleation of the first dislocation, after which they collapse into a pancake shape. Here, we show by experiments and atomistic simulations that the alloying of Ni nanoparticles with Co reduces their ultimate strength. This counter-intuitive solution-softening effect is explained by solute-induced local spatial variations of the resolved shear stress, causing premature dislocation nucleation. At the same time, the subsequent deformation of the particle requires more work, making it tougher. The emerging compromise between strength and toughness can make alloy nanoparticles promising candidates for applications.

The Nature of Delta Phase Precipitation in Inconel 718

1982 ◽  
Vol 40 ◽  
pp. 724-725
Author(s):  
L. S. Lin ◽  
C. C. Law
Keyword(s):  
Inconel 718 ◽  
Base Alloy ◽  
High Strength ◽  
Physical Metallurgy ◽  
Nickel Base Alloy ◽  
Phase Precipitation ◽  
Weight Percentage ◽  
Delta Phase ◽  
The Subject ◽  
Nickel Base

Inconel 718, a precipitation hardenable nickel-base alloy, is a versatile high strength, weldable wrought alloy that is used in the gas turbine industry for components operated at temperatures up to about 1300°F. The nominal chemical composition is 0.6A1-0.9Ti-19.OCr-18.0Fe-3Mo-5.2(Cb + Ta)- 0.1C with the balance Ni (in weight percentage). The physical metallurgy of IN 718 has been the subject of a number of investigations and it is now established that hardening is due, primarily, to the formation of metastable, disc-shaped γ" an ordered body-centered tetragonal structure (DO2 2 type superlattice).

scholarly journals Impact resistance of steel materials to ballistic ejecta and shelter development using steel deck plates

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Hiroyuki Yamada ◽  
Kohei Tateyama ◽  
Shino Naruke ◽  
Hisashi Sasaki ◽  
Shinichi Torigata ◽  
...  
Keyword(s):  
Impact Energy ◽  
Impact Test ◽  
Impact Resistance ◽  
Protective Layer ◽  
High Strength ◽  
Steel Plates ◽  
Corrugated Plates ◽  
Shelter Construction ◽  
The Impact ◽  
Ballistic Ejecta

AbstractThe destruction caused by ballistic ejecta from the phreatic eruptions of Mt. Ontake in 2014 and Mt. Kusatsu-Shirane (Mt. Moto-Shirane) in 2018 in Japan, which resulted in numerous casualties, highlighted the need for better evacuation facilities. In response, some mountain huts were reinforced with aramid fabric to convert them into shelters. However, a number of decisions must be made when working to increase the number of shelters, which depend on the location where they are to be built. In this study, we propose a method of using high-strength steel to reinforce wooden buildings for use as shelters. More specifically, assuming that ballistic ejecta has an impact energy of 9 kJ or more, as in previous studies, we developed a method that utilizes SUS304 and SS400 unprocessed steel plates based on existing impact test data. We found that SUS304 is particularly suitable for use as a reinforcing material because it has excellent impact energy absorption characteristics due to its high ductility as well as excellent corrosion resistance. With the aim of increasing the structural strength of steel shelters, we also conducted an impact test on a shelter fabricated from SS400 deck plates (i.e., steel with improved flexural strength provided by work-hardened trapezoidal corrugated plates). The results show that the shelter could withstand impact with an energy of 13.5 kJ (2.66 kg of simulated ballistic ejecta at 101 m/s on impact). In addition, from the result of the impact test using the roof-simulating structure, it was confirmed the impact absorption energy is further increased when artificial pumice as an additional protective layer is installed on this structure. Observations of the shelter after the impact test show that there is still some allowance for deformation caused by projectile impact, which means that the proposed steel shelter holds promise, not only structurally, but also from the aspects of transportation and assembly. Hence, the usefulness of shelters that use steel was shown experimentally. However, shelter construction should be suitable for the target environment.

scholarly journals Toughness Property Control by Nb and Mo Additions in High-Strength Quenched and Tempered Boron Steels

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 95
Author(s):  
Irati Zurutuza ◽  
Nerea Isasti ◽  
Eric Detemple ◽  
Volker Schwinn ◽  
Hardy Mohrbacher ◽  
...  
Keyword(s):  
Solid Solution ◽  
Transition Temperature ◽  
High Strength ◽  
Unit Size ◽  
Tempered Martensite ◽  
Size Refinement ◽  
Direct Quenching ◽  
Property Control ◽  
The Impact ◽  
Impact Transition Temperature

The synergetic effect on hardenability by combining boron with other microalloying elements (such as Nb, Mo and Nb + Mo) is widely known for high-strength medium carbon steels produced by direct quenching and subsequent tempering treatment. The improvement of mechanical properties could be reached through optimization of different mechanisms, such as solid solution hardening, unit size refinement, strain hardening, fine precipitation hardening and the effect of carbon in solid solution. The current study proposes a procedure for evaluating the contribution of different microstructural aspects on Charpy impact toughness. First, the effect that austenite conditioning has on low-temperature transformation unit sizes and microstructural homogeneity was analysed for the different microalloying element combinations. A detailed crystallographic characterization of the tempered martensite was carried out using electron backscattered diffraction (EBSD) in order to quantify the effect of unit size refinement and dislocation density. The impact of heterogeneity and presence of carbides was also evaluated. The existing equations for impact transition temperature (ITT50%) predictions were extended from ferrite-pearlite and bainitic microstructures to tempered martensite microstructures. The results show that microstructural refinement is most beneficial to strength and toughness while unit size heterogeneity has a particularly negative effect on ductile-to-brittle transition behaviour. By properly balancing alloy concept and processing, steel having a yield strength above 900 MPa and low impact transition temperature could be obtained by direct quenching and tempering.

scholarly journals Ultrahigh Ballistic Resistance of Twisted Bilayer Graphene

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 206
Author(s):  
Qing Peng ◽  
Sheng Peng ◽  
Qiang Cao
Keyword(s):  
Weight Ratio ◽  
High Strength ◽  
Bilayer Graphene ◽  
Energy Propagation ◽  
Dynamic Simulations ◽  
Protective Material ◽  
Impact Performance ◽  
Ballistic Resistance ◽  
Twisted Bilayer Graphene ◽  
The Impact

Graphene is a good candidate for protective material owing to its extremely high stiffness and high strength-to-weight ratio. However, the impact performance of twisted bilayer graphene is still obscure. Herein we have investigated the ballistic resistance capacity of twisted bilayer graphene compared to that of AA-stacked bilayer graphene using molecular dynamic simulations. The energy propagation processes are identical, while the ballistic resistance capacity of the twisted bilayer graphene is almost two times larger than the AA-bilayer graphene. The enhanced capacity of the twisted bilayer graphene is assumed to be caused by the mismatch between the two sheets of graphene, which results in earlier fracture of the first graphene layer and reduces the possibility of penetration.

scholarly journals A smart passive MR damper with a hybrid powering system for impact mitigation: An experimental study

2021 ◽  
pp. 1045389X2098808
Author(s):  
S. Jin ◽  
L. Deng ◽  
J. Yang ◽  
S. Sun ◽  
D. Ning ◽  
...  
Keyword(s):  
Impact Velocity ◽  
Mr Damper ◽  
Damping Force ◽  
Softening Effect ◽  
Impact Speed ◽  
Impact Mitigation ◽  
Passive Damper ◽  
Comparison Results ◽  
Wide Range ◽  
The Impact

This paper presents a smart passive MR damper with fast-responsive characteristics for impact mitigation. The hybrid powering system of the MR damper, composed of batteries and self-powering component, enables the damping of the MR damper to be negatively proportional to the impact velocity, which is called rate-dependent softening effect. This effect can keep the damping force as the maximum allowable constant force under different impact speed and thus improve the efficiency of the shock energy mitigation. The structure, prototype and working principle of the new MR damper are presented firstly. Then a vibration platform was used to characterize the dynamic property and the self-powering capability of the new MR damper. The impact mitigation performance of the new MR damper was evaluated using a drop hammer and compared with a passive damper. The comparison results demonstrate that the damping force generated by the new MR damper can be constant over a large range of impact velocity while the passive damper cannot. The special characteristics of the new MR damper can improve its energy dissipation efficiency over a wide range of impact speed and keep occupants and mechanical structures safe.

scholarly journals Tempforming as an Advanced Processing Method for Carbon Steels

Metals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1566
Author(s):  
Anastasiya Dolzhenko ◽  
Rustam Kaibyshev ◽  
Andrey Belyakov
Keyword(s):  
Impact Toughness ◽  
Crack Propagation ◽  
Large Strain ◽  
High Strength ◽  
Close Relation ◽  
Carbon Steels ◽  
Processing Method ◽  
Propagation Mode ◽  
Displacement Curve ◽  
The Impact

The microstructural mechanisms providing delamination toughness in high-strength low-alloyed steels are briefly reviewed. Thermo-mechanical processing methods improving both the strength and impact toughness are described, with a close relation to the microstructures and textures developed. The effect of processing conditions on the microstructure evolution in steels with different carbon content is discussed. Particular attention is paid to tempforming treatment, which has been recently introduced as a promising processing method for high-strength low-alloyed steel semi-products with beneficial combination of strength and impact toughness. Tempforming consists of large strain warm rolling following tempering. In contrast to ausforming, the steels subjected to tempforming may exhibit an unusual increase in the impact toughness with a decrease in test temperature below room temperature. This phenomenon is attributed to the notch blunting owing to easy splitting (delamination) crosswise to the principle crack propagation. The relationships between the crack propagation mode, the delamination fracture, and the load-displacement curve are presented and discussed. Further perspectives of tempforming applications and promising research directions are outlined.

Physical Simulation of Weldability of Weldox 1300 Steel

2013 ◽  
Vol 762 ◽  
pp. 551-555 ◽  
Author(s):  
Marek Stanislaw Węglowski ◽  
Marian Zeman ◽  
Miroslaw Lomozik
Keyword(s):  
Mechanical Properties ◽  
Impact Toughness ◽  
Physical Simulation ◽  
High Strength ◽  
Parent Material ◽  
Cooling Time ◽  
Electron Microscopies ◽  
Transmission Electron ◽  
Transformation Diagrams ◽  
The Impact

In the present study, the investigation of weldability of new ultra-high strength - Weldox 1300 steel has been presented. The thermal simulated samples were used to investigate the effect of welding cooling time t8/5 on the microstructure and mechanical properties of the heat affected zone (HAZ). In the frame of these investigation the microstructure was studied by the light (LM) and transmission electron microscopies (TEM). It has been shown that the microstructure of the Weldox 1300 steel is composed of tempered martensite, and inside the laths the minor precipitations mainly V(CN) and molybdenum carbide Mo2C were observed. Mechanical properties of parent material were analysed by the tensile, impact and hardness tests. In details the influence of cooling time in the range of 2,5 - 300 s. on hardness, impact toughness and microstructure of simulated HAZ was studied by using welding thermal simulation test. The results show that the impact toughness and hardness decrease with the increase of t8/5 under the condition of a single thermal cycle in simulated HAZ. The continuous cooling transformation diagrams (CCT-W for welding conditions) of Weldox 1300 steel for welding purposes was also elaborated. The steel Weldox 1300 for cooling time in the range of 2,5 - 4 s showed martensite microstructure, for time from 4 s to 60 s mixture of martensite and bainite, and for longer cooling time mixture of ferrite, bainite and martensite. The results indicated that the weldability of Weldox 1300 steel is limited and to avoid the cold cracking the preheating procedure or medium net linear heat input should be used.

The impact of neutralizer-free ignition of a radio frequency ion thruster on the lifetime of the ion optics system

2021 ◽  
pp. 2140017
Author(s):  
Long-Fei Ma ◽  
Li Duan ◽  
Jian-Wu He ◽  
Qi Kang ◽  
Keyword(s):  
Radio Frequency ◽  
Pyrolytic Graphite ◽  
High Strength ◽  
Surface Damage ◽  
External Source ◽  
Ion Thruster ◽  
Neutral Gas ◽  
Discharge Ignition ◽  
Ion Optical System ◽  
The Impact

In the initial stage of a radio frequency ion thruster (RIT) ignition, an influx of electrons is required from an external source into the discharge chamber and ionization of the neutral gas propellant. A neutralizer-free method for Townsend breakdown discharge ignition based on Paschen’s law was developed in this study. The feasibility of the ignition method was confirmed by performing thousands of ignition experiments. Metallic Molybdenum (Mo), pyrolytic graphite (PG) and Zr[Formula: see text]Ti[Formula: see text]Cu[Formula: see text]Ni[Formula: see text]Be[Formula: see text]alloy acceleration grids were prepared, and ignition-induced damage on the grids was investigated. A field-emission scanning electron microscope was used to inspect surface damage on the grids after multiple ignitions and to analyze the influence of the ignition method on the lifetime of the ion optical system. Grid materials for space missions that require multiple RIT ignitions (10[Formula: see text] should be high-strength blocks that are resistant to sputtering corrosion and high temperature.

On the impact of lattice parameter accuracy of atomistic simulations on the microstructure of Ni-Ti shape memory alloys

2021 ◽  
Author(s):  
Lorenzo La Rosa ◽  
Francesco Maresca
Keyword(s):  
Molecular Dynamics ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Lattice Parameter ◽  
Lattice Parameters ◽  
Atomistic Simulations ◽  
Interatomic Potentials ◽  
The Impact

Abstract Ni-Ti is a key shape memory alloy (SMA) system for applications, being cheap and having good mechanical properties. Recently, atomistic simulations of Ni-Ti SMAs have been used with the purpose of revealing the nano-scale mechanisms that control superelasticity and the shape memory effect, which is crucial to guide alloying or processing strategies to improve materials performance. These atomistic simulations are based on molecular dynamics modelling that relies on (empirical) interatomic potentials. These simulations must reproduce accurately the mechanism of martensitic transformation and the microstructure that it originates, since this controls both superelasticity and the shape memory effect. As demonstrated by the energy minimization theory of martensitic transformations [Ball, James (1987) Archive for Rational Mechanics and Analysis, 100:13], the microstructure of martensite depends on the lattice parameters of the austenite and the martensite phases. Here, we compute the bounds of possible microstructural variations based on the experimental variations/uncertainties in the lattice parameter measurements. We show that both density functional theory and molecular dynamics lattice parameters are typically outside the experimental range, and that seemingly small deviations from this range induce large deviations from the experimental bounds of the microstructural predictions, with notable cases where unphysical microstructures are predicted to form. Therefore, our work points to a strategy for benchmarking and selecting interatomic potentials for atomistic modelling of shape memory alloys, which is crucial to modelling the development of martensitic microstructures and their impact on the shape memory effect.

Sign in / Sign up

Export Citation Format

Share Document