scholarly journals Suppressed electronic contribution in thermal conductivity of Ge2Sb2Se4Te

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Kiumars Aryana ◽  
Yifei Zhang ◽  
John A. Tomko ◽  
Md Shafkat Bin Hoque ◽  
Eric R. Hoglund ◽  
...  

AbstractIntegrated nanophotonics is an emerging research direction that has attracted great interests for technologies ranging from classical to quantum computing. One of the key-components in the development of nanophotonic circuits is the phase-change unit that undergoes a solid-state phase transformation upon thermal excitation. The quaternary alloy, Ge2Sb2Se4Te, is one of the most promising material candidates for application in photonic circuits due to its broadband transparency and large optical contrast in the infrared spectrum. Here, we investigate the thermal properties of Ge2Sb2Se4Te and show that upon substituting tellurium with selenium, the thermal transport transitions from an electron dominated to a phonon dominated regime. By implementing an ultrafast mid-infrared pump-probe spectroscopy technique that allows for direct monitoring of electronic and vibrational energy carrier lifetimes in these materials, we find that this reduction in thermal conductivity is a result of a drastic change in electronic lifetimes of Ge2Sb2Se4Te, leading to a transition from an electron-dominated to a phonon-dominated thermal transport mechanism upon selenium substitution. In addition to thermal conductivity measurements, we provide an extensive study on the thermophysical properties of Ge2Sb2Se4Te thin films such as thermal boundary conductance, specific heat, and sound speed from room temperature to 400 °C across varying thicknesses.

2021 ◽  
Vol 7 (20) ◽  
pp. eabe6000
Author(s):  
Lin Yang ◽  
Madeleine P. Gordon ◽  
Akanksha K. Menon ◽  
Alexandra Bruefach ◽  
Kyle Haas ◽  
...  

Organic-inorganic hybrids have recently emerged as a class of high-performing thermoelectric materials that are lightweight and mechanically flexible. However, the fundamental electrical and thermal transport in these materials has remained elusive due to the heterogeneity of bulk, polycrystalline, thin films reported thus far. Here, we systematically investigate a model hybrid comprising a single core/shell nanowire of Te-PEDOT:PSS. We show that as the nanowire diameter is reduced, the electrical conductivity increases and the thermal conductivity decreases, while the Seebeck coefficient remains nearly constant—this collectively results in a figure of merit, ZT, of 0.54 at 400 K. The origin of the decoupling of charge and heat transport lies in the fact that electrical transport occurs through the organic shell, while thermal transport is driven by the inorganic core. This study establishes design principles for high-performing thermoelectrics that leverage the unique interactions occurring at the interfaces of hybrid nanowires.


RSC Advances ◽  
2021 ◽  
Vol 11 (39) ◽  
pp. 24456-24465
Author(s):  
Rapaka S. C. Bose ◽  
K. Ramesh

Polycrystalline p-type Sb1.5Bi0.5Te3 (SBT) and n-type Bi2Te2.7Se0.3 (BTS) compounds possessing layered crystal structure show anisotropic electronic and thermal transport properties.


2006 ◽  
Vol 317-318 ◽  
pp. 501-504 ◽  
Author(s):  
Mineaki Matsumoto ◽  
Norio Yamaguchi ◽  
Hideaki Matsubara

Effect of La2O3 addition on thermal conductivity and high temperature stability of YSZ coating produced by EB-PVD was investigated. La2O3 was selected as an additive because it had a significant effect on suppressing densification of YSZ. The developed coating showed extremely low thermal conductivity as well as high resistance to sintering. Microstructural observation revealed that the coating had fine feather-like subcolumns and nanopores, which contributed to limit thermal transport. These nanostructures were thought to be formed by suppressing densification during deposition.


Nanoscale ◽  
2021 ◽  
Author(s):  
Shaoyang Xiong ◽  
Yue Qin ◽  
Linhong Li ◽  
Guoyong Yang ◽  
Maohua Li ◽  
...  

In order to meet the requirement of thermal performance with the rapid development of high-performance electronic devices, constructing a three-dimensional thermal transport skeleton is an effective method for enhancing thermal...


2010 ◽  
Vol 14 (1) ◽  
pp. 31-38 ◽  
Author(s):  
Sunday Etuk ◽  
Louis Akpabio ◽  
Ita Akpan

Thermal conductivity values at the temperature of 301-303K have been measured for Zea mays straw board as well as Zea mays heartwood (cork) board. Comparative study of the thermal conductivity values of the boards reveal that Zea mays heartwood board has a lower thermal conductivity value to that of the straw board. The study also shows that the straw board is denser than the heartwood board. Specific heat capacity value is less in value for the heartwood board than the straw board. These parameters also affect the thermal diffusivity as well as thermal absorptivity values for the two types of boards. The result favours the two boards as thermal insulators for thermal envelop but with heartwood board as a preferred insulation material than the straw board.


2020 ◽  
Author(s):  
Jianqin Tang ◽  
Jonathan Skelton

We present a systematic first-principles modelling study of the structural dynamics and thermal transport in the CoSb<sub>3</sub> skutterudites with a series of noble-gas filler atoms. A range of analysis techniques are proposed to estimate the filler rattling frequencies, to quantify the separate impacts of filling on the phonon group velocities and lifetimes, and to show how changes to the phonon spectra and interaction strengths lead to suppressed lifetimes. The fillers are found to reduce the thermal conductivity of the CoSb<sub>3</sub> framework by up to 15 % primarily by suppressing the group velocities of low-lying optic modes. Calculations show that the filler rattling frequencies are determined by a detailed balance of increasing atomic mass and stronger interactions with the framework, and are a good predictor of their impact on the heat transport. Lowering the rattling frequency below ~1.5 THz by selecting heavy fillers that interact weakly with the framework is predicted to produce a much larger suppression of the thermal transport, by inducing avoided crossings in the acoustic-mode dispersion and facilitating resonant scattering with a consequent large reduction in the lifetimes. Approximate rattling frequencies determined from the harmonic force constants may therefore provide a useful metric for selecting filler atoms to optimise the thermal transport in skutterudites and other cage compounds such as clathrates.


2013 ◽  
Vol 1517 ◽  
Author(s):  
Petar Popčević ◽  
Ante Bilušić ◽  
Kristijan Velebit ◽  
Ana Smontara

ABSTRACTTransport properties (thermal conductivity, electrical resistivity and thermopower) of decagonal quasicrystal d-AlCoNi, and approximant phases Y-AlCoNi, o-Al13Co4, m-Al13Fe4, m-Al13(Fe,Ni)4 and T-AlMnFe have been reviewed. Among all presented alloys the stacking direction (periodic for decagonal quasicrystals) is the most conductive one for the charge and heat transport, and the in/out-of-plane anisotropy is much larger than the in-plane anisotropy. There is a strong relationship between periodicity length along stacking direction and anisotropy of transport properties in both quasicrystals and their approximants suggesting a decrease of the anisotropy with increasing number of stacking layers.


2005 ◽  
Author(s):  
Zhanrong Zhong ◽  
Xinwei Wang

In this work, thermal transport in nanocrystalline materials is studied using large-scale equilibrium molecular dynamics (MD) simulation. Nanocrystalline materials with different grain sizes are studied to explore how and to what extent the size of nanograins affects the thermal conductivity and specific heat. Substantial thermal conductivity reduction is observed and the reduction is stronger for nanocrystalline materials with smaller grains. On the other hand, the specific heat of nanocrystalline materials shows little change with the grain size. The simulation results are compared with the thermal transport in individual nanograins based on MD simulation. Further discussions are provided to explain the fundamental physics behind the observed thermal phenomena in this work.


1989 ◽  
Vol 177 ◽  
Author(s):  
David H. Van Winkle ◽  
Jit Gurung ◽  
Rand Biggers

ABSTRACTThe thermal transport across a thick (0.66 cm) liquid crystal cell has been measured versus applied ac voltage and frequency. These measurements are correlated with the optically observed onset of flow and turbulence in cells as identical as practicable to those used for the thermal transport measurements. In addition, the measurements are compared with reported observations in thin cells. The thermal transport across the liquid crystal is characterized by an effective thermal conductivity Kf. It was found that Kf increases with increasing frequency, at constant voltage, to a maximum enhancement at about 40 Hz at room temperature. Optical observations on thick cells indicate that dynamic columnar domains of flowing liquid crystal are the primary mode of heat transport, as determined by correlating the structure and characteristic lifetime of such domains as a function of voltage and frequency. Optical observations at low voltages suggest that Williams Domains do not exist in these thick cells, and that all observed responses are functions of electric field strength, not applied voltage (as in thin Williams Domain cells).


Nanoscale ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 4301-4310 ◽  
Author(s):  
Yang Hong ◽  
Jingchao Zhang ◽  
Xiao Cheng Zeng

Lateral and flexural thermal transport processes in monolayer and bilayer C3N are systematically investigated using MD simulation.


Sign in / Sign up

Export Citation Format

Share Document