scholarly journals Dihydroxyacetone valorization with high atom efficiency via controlling radical oxidation pathways over natural mineral-inspired catalyst

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jinling Wang ◽  
Xingchao Dai ◽  
Hualin Wang ◽  
Honglai Liu ◽  
Jabor Rabeah ◽  
...  
Keyword(s):  
Formic Acid ◽  
Glycolic Acid ◽  
Value Added ◽  
Cost Effective ◽  
Isotopic Labeling ◽  
Catalyst Design ◽  
Utilization Efficiency ◽  
Oh Radicals ◽  
Radical Oxidation ◽  
Carbon Efficiency

AbstractDiminishing fossil fuel resources and calls for sustainability are driving the urgent need for efficient valorization of renewable resources with high atom efficiency. Inspired from the natural goethite mineral with Mn paragenesis, we develop cost-effective MnO2/goethite catalysts for the efficient valorization of dihydroxyacetone, an important biomass-based platform molecule, into value-added glycolic acid and formic acid with 83.2% and 93.4% yields. The DHA substrates first undergo C−C cleavage to selectively form glycolic acid and hydroxymethyl (·CH2OH) radicals, which are further oxidized into formic acid. The kinetic and isotopic labeling experiments reveal that the catalase-like activity of MnO2 turns the oxidative radicals into oxygen, which then switches towards a hydroxymethyl peroxide (HMOO) pathway for formic acid generation and prevents formic acid over-oxidation. This nature-inspired catalyst design not only significantly improves the carbon efficiency to 86.6%, but also enhances the oxygen atom utilization efficiency from 11.2% to 46.6%, indicating a promising biomass valorization process.

scholarly journals Coordination of consolidated bioprocessing technology and carbon dioxide fixation to produce malic acid directly from plant biomass in Myceliophthora thermophila

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Jingen Li ◽  
Bingchen Chen ◽  
Shuying Gu ◽  
Zhen Zhao ◽  
Qian Liu ◽  
...  
Keyword(s):  
Malic Acid ◽  
Plant Biomass ◽  
Consolidated Bioprocessing ◽  
Average Rate ◽  
Value Added ◽  
Cost Effective ◽  
Myceliophthora Thermophila ◽  
Carbon Efficiency ◽  
Bulk Chemicals ◽  
Promising Strategy

Abstract Background Consolidated bioprocessing (CBP) technique is a promising strategy for biorefinery construction, producing bulk chemicals directly from plant biomass without extra hydrolysis steps. Fixing and channeling CO2 into carbon metabolism for increased carbon efficiency in producing value-added compounds is another strategy for cost-effective bio-manufacturing. It has not been reported whether these two strategies can be combined in one microbial platform. Results In this study, using the cellulolytic thermophilic fungus Myceliophthora thermophila, we designed and constructed a novel biorefinery system DMCC (Direct microbial conversion of biomass with CO2 fixation) through incorporating two CO2 fixation modules, PYC module and Calvin–Benson–Bassham (CBB) pathway. Harboring the both modules, the average rate of fixing and channeling 13CO2 into malic acid in strain CP51 achieved 44.4, 90.7, and 80.7 mg/L/h, on xylose, glucose, and cellulose, respectively. The corresponding titers of malic acid were up to 42.1, 70.4, and 70.1 g/L, respectively, representing the increases of 40%, 10%, and 7%, respectively, compared to the parental strain possessing only PYC module. The DMCC system was further improved by enhancing the pentose uptake ability. Using raw plant biomass as the feedstock, yield of malic acid produced by the DMCC system was up to 0.53 g/g, with 13C content of 0.44 mol/mol malic acid, suggesting DMCC system can produce 1 t of malic acid from 1.89 t of biomass and fix 0.14 t CO2 accordingly. Conclusions This study designed and constructed a novel biorefinery system named DMCC, which can convert raw plant biomass and CO2 into organic acid efficiently, presenting a promising strategy for cost-effective production of value-added compounds in biorefinery. The DMCC system is one of great options for realization of carbon neutral economy.

scholarly journals Multi-Country Scale Assessment of Available Energy Recovery Potential Using Micro-Hydropower in Drinking, Pressurised Irrigation and Wastewater Networks, Covering Part of the EU

Water ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 899
Author(s):  
Djordje Mitrovic ◽  
Miguel Crespo Chacón ◽  
Aida Mérida García ◽  
Jorge García Morillo ◽  
Juan Antonio Rodríguez Diaz ◽  
...  
Keyword(s):  
Drinking Water ◽  
Northern Ireland ◽  
Energy Recovery ◽  
Large Scale ◽  
Significant Proportion ◽  
Value Added ◽  
Cost Effective ◽  
Net Energy ◽  
Water Networks ◽  
Scale Assessment

Studies have shown micro-hydropower (MHP) opportunities for energy recovery and CO2 reductions in the water sector. This paper conducts a large-scale assessment of this potential using a dataset amassed across six EU countries (Ireland, Northern Ireland, Scotland, Wales, Spain, and Portugal) for the drinking water, irrigation, and wastewater sectors. Extrapolating the collected data, the total annual MHP potential was estimated between 482.3 and 821.6 GWh, depending on the assumptions, divided among Ireland (15.5–32.2 GWh), Scotland (17.8–139.7 GWh), Northern Ireland (5.9–8.2 GWh), Wales (10.2–8.1 GWh), Spain (375.3–539.9 GWh), and Portugal (57.6–93.5 GWh) and distributed across the drinking water (43–67%), irrigation (51–30%), and wastewater (6–3%) sectors. The findings demonstrated reductions in energy consumption in water networks between 1.7 and 13.0%. Forty-five percent of the energy estimated from the analysed sites was associated with just 3% of their number, having a power output capacity >15 kW. This demonstrated that a significant proportion of energy could be exploited at a small number of sites, with a valuable contribution to net energy efficiency gains and CO2 emission reductions. This also demonstrates cost-effective, value-added, multi-country benefits to policy makers, establishing the case to incentivise MHP in water networks to help achieve the desired CO2 emissions reductions targets.

scholarly journals Transforming biorefinery designs with ‘Plug-In Processes of Lignin’ to enable economic waste valorization

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Zhi-Hua Liu ◽  
Naijia Hao ◽  
Yun-Yan Wang ◽  
Chang Dou ◽  
Furong Lin ◽  
...  
Keyword(s):  
Cellulosic Ethanol ◽  
Cost Effective ◽  
Substantial Improvement ◽  
Selling Price ◽  
Waste Valorization ◽  
Lignin Valorization ◽  
Capital Costs ◽  
Carbon Efficiency ◽  
Synergistic Enhancement ◽  
Total Capital

AbstractBiological lignin valorization has emerged as a major solution for sustainable and cost-effective biorefineries. However, current biorefineries yield lignin with inadequate fractionation for bioconversion, yet substantial changes of these biorefinery designs to focus on lignin could jeopardize carbohydrate efficiency and increase capital costs. We resolve the dilemma by designing ‘plug-in processes of lignin’ with the integration of leading pretreatment technologies. Substantial improvement of lignin bioconversion and synergistic enhancement of carbohydrate processing are achieved by solubilizing lignin via lowering molecular weight and increasing hydrophilic groups, addressing the dilemma of lignin- or carbohydrate-first scenarios. The plug-in processes of lignin could enable minimum polyhydroxyalkanoate selling price at as low as $6.18/kg. The results highlight the potential to achieve commercial production of polyhydroxyalkanoates as a co-product of cellulosic ethanol. Here, we show that the plug-in processes of lignin could transform biorefinery design toward sustainability by promoting carbon efficiency and optimizing the total capital cost.

scholarly journals Optimisation of microalgal cultivation via nutrient-enhanced strategies: the biorefinery paradigm

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Gonzalo M. Figueroa-Torres ◽  
Jon K. Pittman ◽  
Constantinos Theodoropoulos
Keyword(s):  
Kinetic Model ◽  
Growth Dynamics ◽  
Value Added ◽  
Cost Effective ◽  
Predictive Modelling ◽  
Nitrogen And Phosphorus ◽  
Predictive Capacity ◽  
Microalgal Biomass ◽  
Microalgal Cultivation ◽  
Lipid Formation

Abstract Background The production of microalgal biofuels, despite their sustainable and renowned potential, is not yet cost-effective compared to current conventional fuel technologies. However, the biorefinery concept increases the prospects of microalgal biomass as an economically viable feedstock suitable for the co-production of multiple biofuels along with value-added chemicals. To integrate biofuels production within the framework of a microalgae biorefinery, it is not only necessary to exploit multi-product platforms, but also to identify optimal microalgal cultivation strategies maximising the microalgal metabolites from which biofuels are obtained: starch and lipids. Whilst nutrient limitation is widely known for increasing starch and lipid formation, this cultivation strategy can greatly reduce microalgal growth. This work presents an optimisation framework combining predictive modelling and experimental methodologies to effectively simulate and predict microalgal growth dynamics and identify optimal cultivation strategies. Results Microalgal cultivation strategies for maximised starch and lipid formation were successfully established by developing a multi-parametric kinetic model suitable for the prediction of mixotrophic microalgal growth dynamics co-limited by nitrogen and phosphorus. The model’s high predictive capacity was experimentally validated against various datasets obtained from laboratory-scale cultures of Chlamydomonas reinhardtii CCAP 11/32C subject to different initial nutrient regimes. The identified model-based optimal cultivation strategies were further validated experimentally and yielded significant increases in starch (+ 270%) and lipid (+ 74%) production against a non-optimised strategy. Conclusions The optimised microalgal cultivation scenarios for maximised starch and lipids, as identified by the kinetic model presented here, highlight the benefits of exploiting modelling frameworks as optimisation tools that facilitate the development and commercialisation of microalgae-to-fuel technologies.

scholarly journals Quasi-graphitic carbon shell-induced Cu confinement promotes electrocatalytic CO2 reduction toward C2+ products

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Ji-Yong Kim ◽  
Deokgi Hong ◽  
Jae-Chan Lee ◽  
Hyoung Gyun Kim ◽  
Sungwoo Lee ◽  
...  
Keyword(s):  
High Efficiency ◽  
Co2 Reduction ◽  
Value Added ◽  
Material Design ◽  
Catalyst System ◽  
Critical Issue ◽  
Reduction Reaction ◽  
Catalyst Design ◽  
Design Strategies ◽  
Faradaic Efficiency

AbstractFor steady electroconversion to value-added chemical products with high efficiency, electrocatalyst reconstruction during electrochemical reactions is a critical issue in catalyst design strategies. Here, we report a reconstruction-immunized catalyst system in which Cu nanoparticles are protected by a quasi-graphitic C shell. This C shell epitaxially grew on Cu with quasi-graphitic bonding via a gas–solid reaction governed by the CO (g) - CO2 (g) - C (s) equilibrium. The quasi-graphitic C shell-coated Cu was stable during the CO2 reduction reaction and provided a platform for rational material design. C2+ product selectivity could be additionally improved by doping p-block elements. These elements modulated the electronic structure of the Cu surface and its binding properties, which can affect the intermediate binding and CO dimerization barrier. B-modified Cu attained a 68.1% Faradaic efficiency for C2H4 at −0.55 V (vs RHE) and a C2H4 cathodic power conversion efficiency of 44.0%. In the case of N-modified Cu, an improved C2+ selectivity of 82.3% at a partial current density of 329.2 mA/cm2 was acquired. Quasi-graphitic C shells, which enable surface stabilization and inner element doping, can realize stable CO2-to-C2H4 conversion over 180 h and allow practical application of electrocatalysts for renewable energy conversion.

A structure–activity relationship study using DFT analysis of Bronsted–Lewis acidic ionic liquids and synergistic effect of dual acidity in one-pot conversion of glucose to value-added chemicals

2018 ◽  
Vol 42 (2) ◽  
pp. 1423-1430 ◽  
Author(s):  
Firdaus Parveen ◽  
Tanmoy Patra ◽  
Sreedevi Upadhyayula
Keyword(s):  
Ionic Liquids ◽  
Synergistic Effect ◽  
Formic Acid ◽  
Levulinic Acid ◽  
Value Added ◽  
One Pot ◽  
Structure Activity ◽  
Acidic Ionic Liquids ◽  
Commercially Important ◽  
Relationship Study

The catalytic conversion of biomass-derived carbohydrates to value-added chemicals, such as 5-hydroxymethylfurfural, levulinic acid, and formic acid, is a commercially important reaction and requires the use of both Lewis and Bronsted acids.

scholarly journals Valorization of secondary feedstocks from the agroindustry by selective catalytic oxidation to formic and acetic acid using the OxFA process

2021 ◽  
Author(s):  
Sebastian Ponce ◽  
Stefanie Wesinger ◽  
Daniela Ona ◽  
Daniela Almeida Streitwieser ◽  
Jakob Albert
Keyword(s):  
Acetic Acid ◽  
Formic Acid ◽  
Reaction System ◽  
Value Added ◽  
Industrial Wastes ◽  
Raw Material ◽  
Gaseous Oxygen ◽  
Water As Solvent ◽  
Selective Catalytic Oxidation ◽  
Major Interest

AbstractThe selective oxidative conversion of seven representative fully characterized biomasses recovered as secondary feedstocks from the agroindustry is reported. The reaction system, known as the “OxFA process,” involves a homogeneous polyoxometalate catalyst (H8PV5Mo7O40), gaseous oxygen, p-toluene sulfonic acid, and water as solvent. It took place at 20 bar and 90 °C and transformed agro-industrial wastes, such as coffee husks, cocoa husks, palm rachis, fiber and nuts, sugarcane bagasse, and rice husks into biogenic formic acid, acetic acid, and CO2 as sole products. Even though all samples were transformed; remarkably, the reaction obtains up to 64, and 55% combined yield of formic and acetic acid for coffee and cocoa husks as raw material within 24 h, respectively. In addition to the role of the catalysts and additive for promoting the reaction, the influence of biomass components (hemicellulose, cellulose and lignin) into biogenic formic acid formation has been also demonstrated. Thus, these results are of major interest for the application of novel oxidation techniques under real recovered biomass for producing value-added products. Graphical abstract

Aligning the flow cytometric evaluation with the diagnostic need: an evidence-based approach

2017 ◽  
Vol 70 (9) ◽  
pp. 740-744 ◽  
Author(s):  
Dawn Williams-Voorbeijtel ◽  
Francisco Sanchez ◽  
Christine G Roth
Keyword(s):  
Clinical Care ◽  
Cost Savings ◽  
Value Added ◽  
Cost Effective ◽  
Just In Time ◽  
Evidence Based ◽  
Flow Cytometric ◽  
A Value ◽  
Screening Approach ◽  
Minimum Requirements

AimsElimination of non-value added testing without compromising high-quality clinical care is an important mandate for laboratories in a value-based reimbursement system. The goal of this study was to determine the optimal combination of flow cytometric markers for a screening approach that balances efficiency and accuracy.MethodsAn audit over 9 months of flow cytometric testing was performed, including rereview of all dot plots from positive cases.ResultsOf the 807 cases in which leukaemia/lymphoma testing was performed, 23 were non-diagnostic and 189 represented bronchoalveolar lavage specimens. Of the remaining 595 cases, 137 (23%) were positive for an abnormal haematolymphoid population. Review of the positive cases identified minimum requirements for a screening tube as well as analysis strategies to overcome the diagnostic pitfalls noted. It is estimated that 38% fewer antibodies would be used in a screening approach, representing an opportunity for significant cost savings.ConclusionsWe provide a framework for developing an evidence-based screening combination for cost-effective characterisation of haematolymphoid malignancies, promoting adoption of ‘just-in-time’ testing systems that tailor the evaluation to the diagnostic need.

Highly efficient photo-degradation of cetirizine antihistamine with TiO2-SiO2 photocatalyst under ultraviolet irradiation

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Sonam Rani ◽  
Alok Garg ◽  
Neetu Singh
Keyword(s):  
Particle Size ◽  
Photocatalytic Activity ◽  
Terephthalic Acid ◽  
Cost Effective ◽  
Oh Radicals ◽  
Large Specific Surface Area ◽  
Photo Degradation ◽  
Macroscopic Structure ◽  
Bet Analysis ◽  
Positive Effect

Abstract Photocatalysis is an extraordinary and vastly researched topic; there is a need to find new ways to support producing composite materials that are cost-effective, efficient and have a low environmental impact. The investigation was undertaken on syn TiO2 by depositing it on silica. The results elucidate the positive effect on photocatalysis activity and the macroscopic structure on which the TiO2 is formed. For the analysis of photocatalyst, various characterisation measurements were undertaken, such as XRD, FTIR, DRS, FESEM, TEM, RS, and BET. The accumulated TiO2 onto the surface of SiO2 stabilised its transformation of the phase from anatase to rutile, resulting in decreased particle size and enhancing its photocatalytic activity under UV irradiation. The concentration of OH• radicals was determined using terephthalic acid as a probe molecule to determine its role in the photocatalytic degradation of antihistamine. The results of BET analysis showed that the syn TiO2-SiO2 sample has a large specific surface area of 192.6 m2 g−1. Maximum degradation of cetirizine (about 97%) was achieved with 80% TiO2-20% SiO2 (TS-4). Recyclability test confirmed that 80% TiO2-20% SiO2 sample was stable up to six cycles.

Sign in / Sign up

Export Citation Format

Share Document