scholarly journals Mechanical strength and flexibility in $$\alpha '$$-4H borophene

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shobair Mohammadi Mozvashi ◽  
Mohammad Ali Mohebpour ◽  
Sahar Izadi Vishkayi ◽  
Meysam Bagheri Tagani
Keyword(s):  
Mechanical Properties ◽  
Mechanical Strength ◽  
2D Materials ◽  
Group Iv ◽  
Good Stability ◽  
Free Standing ◽  
Promising Candidate ◽  
Inherent Anisotropy

AbstractVery recently, a novel phase of hydrogenated borophene, namely $$\alpha '$$ α ′ -4H, has been synthesized in a free-standing form. Unlike pure borophenes, this phase shows very good stability in the air environment and possesses semiconducting characteristics. Because of the interesting stiffness and flexibility of borophenes, herein, we systematically studied the mechanical properties of this novel hydrogenated phase. Our results show that the monolayer is stiffer (Y$$_\text {xy}$$ xy = $$\sim $$ ∼ 195 N/m) than group IV and V 2D materials and even than MoS$$_2$$ 2 , while it is softer than graphene. Moreover, similar to other phases of borophene, the inherent anisotropy of the pure monolayer increases with hydrogenation. The monolayer can bear biaxial, armchair, and zigzag strains up to 16, 10, and 14% with ideal strengths of approximately 14, 9, and 12 N/m, respectively. More interestingly, it can remain semiconductor under this range of tension. These outstanding results suggest that the $$\alpha '$$ α ′ -4H is a promising candidate for flexible nanoelectronics.

Dynamics of Thin Film NiTi Cantilevers on Si

1993 ◽  
Vol 311 ◽  
Author(s):  
A.Peter Jardine ◽  
Peter G. Mercado
Keyword(s):  
Thin Film ◽  
Mechanical Properties ◽  
Response Times ◽  
Bulk Material ◽  
Fast Response ◽  
Free Standing ◽  
Promising Candidate ◽  
Strain Measurements ◽  
Micro Actuators ◽  
Cycling Time

ABSTRACTAlthough the thermo-mechanical properties of NiTi are well known for bulk material, its deposition and utilization as a thin film are still in their earliest stages of research. The deposition of thin-films of Shape Memory Effect NiTi onto Si(100) wafers offers several advantages over bulk NiTi, including fast response times and comparatively large transformation forces. This has made it a promising candidate material as micro-actuators for Micro-Electro-Mechanical (MEMS) systems as well as for strain measurements. The cycling time for actuation was measured for a 20 μm free standing NiTi thin film cantilever. It was demonstrated that cycling frequencies of up to 50 Hz are achievable.

Ultrastrong, Free-Standing and Large Nanofilms of Pyrenearamid

2019 ◽  
Author(s):  
Amalia Rapakousiou ◽  
Alejandro López-moreno ◽  
Belén Nieto-Ortega ◽  
M. Mar Bernal ◽  
Miguel A. Monclús ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Building Block ◽  
Aromatic Polyamide ◽  
Free Standing ◽  
Spatial Confinement ◽  
Polymeric Structure ◽  
Reduced Modulus ◽  
Organizational Arrangement ◽  
Polycyclic Aromatic ◽  
Nanoscale Building Block

We introduce poly(1,6-pyrene terephthalamide) polymer (PPyrTA) as an aromatic polyamide analogue of poly(p-phenylene terephthalamide) (PPTA), also known as Kevlar®. This work shows that the incorporation of polycyclic aromatic pyrene moieties improves drastically the mechanical properties of the polymeric structure, increasing elastic nanoindentation-determined modulus and hardness by factors of 1.9 and 4.3, respectively. Liquid deprotonated dispersions of PPyrTA nanofibers were used as nanoscale building block for producing large-surface, free-standing polymer macroscopic nanofilms. This 2D assembly leads to further significant improvements in reduced modulus and hardness (more than twice) compared to the starting polymer macroscale fibres, due to a better re-organizational arrangement of the PPyrTA nanofibers in the nanofilms, formed under 2D spatial confinement.

scholarly journals A reactive molecular dynamics study on the mechanical properties of a recently synthesized amorphous carbon monolayer converted into a nanotube/nanoscroll

2021 ◽  
Author(s):  
Marcelo Lopes Pereira Junior ◽  
Wiliam Ferreira da Cunha ◽  
Douglas Soares Galvão ◽  
Luiz Antonio Ribeiro Junior
Keyword(s):  
Mechanical Properties ◽  
Molecular Dynamics ◽  
Chemical Vapor Deposition ◽  
Amorphous Carbon ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Free Standing ◽  
Reactive Molecular Dynamics

Recently, laser-assisted chemical vapor deposition has been used to synthesize a free-standing, continuous, and stable monolayer amorphous carbon (MAC).

scholarly journals High-strength and fibrous capsule–resistant zwitterionic elastomers

2021 ◽  
Vol 7 (1) ◽  
pp. eabc5442
Author(s):  
Dianyu Dong ◽  
Caroline Tsao ◽  
Hsiang-Chieh Hung ◽  
Fanglian Yao ◽  
Chenjue Tang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Strength ◽  
High Strength ◽  
Design Principles ◽  
Fibrous Capsule ◽  
High Mechanical Strength ◽  
Capsule Formation ◽  
Locking Mechanism ◽  
Fibrous Capsule Formation

The high mechanical strength and long-term resistance to the fibrous capsule formation are two major challenges for implantable materials. Unfortunately, these two distinct properties do not come together and instead compromise each other. Here, we report a unique class of materials by integrating two weak zwitterionic hydrogels into an elastomer-like high-strength pure zwitterionic hydrogel via a “swelling” and “locking” mechanism. These zwitterionic-elastomeric-networked (ZEN) hydrogels are further shown to efficaciously resist the fibrous capsule formation upon implantation in mice for up to 1 year. Such materials with both high mechanical properties and long-term fibrous capsule resistance have never been achieved before. This work not only demonstrates a class of durable and fibrous capsule–resistant materials but also provides design principles for zwitterionic elastomeric hydrogels.

Mechanics of free-standing inorganic and molecular 2D materials

Nanoscale ◽  
2021 ◽  
Author(s):  
Xianghui Zhang ◽  
Andre Beyer
Keyword(s):  
Recent Progress ◽  
Mechanical Characterization ◽  
2D Materials ◽  
Two Dimensional ◽  
Free Standing ◽  
Inorganic As

The discovery of graphene has triggered a great interest in inorganic as well as molecular two-dimensional (2D) materials. In this review, we summarize recent progress in the mechanical characterization of...

Optically Transparent Polymethyl Methacrylate Composites made with Glass Fibers of Varying Refractive Index

1997 ◽  
Vol 12 (4) ◽  
pp. 1091-1101 ◽  
Author(s):  
Seunggu Kang ◽  
Hongy Lin ◽  
Delbert E. Day ◽  
James O. Stoffer
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Refractive Index ◽  
Mechanical Strength ◽  
Glass Fiber ◽  
Polymethyl Methacrylate ◽  
Optical Transmission ◽  
Annealing Temperature ◽  
Glass Fibers ◽  
Optically Transparent

The dependence of the optical and mechanical properties of optically transparent polymethyl methacrylate (PMMA) composites on the annealing temperature of BK10 glass fibers was investigated. Annealing was used to modify the refractive index (R.I.) of the glass fiber so that it would more closely match that of PMMA. Annealing increased the refractive index of the fibers and narrowed the distribution of refractive index of the fibers, but lowered their mechanical strength so the mechanical properties of composites reinforced with annealed fibers were not as good as for composites containing as-pulled (chilled) glass fibers. The refractive index of as-pulled 17.1 μm diameter fibers (R.I. = 1.4907) increased to 1.4918 and 1.4948 after annealing at 350 °C to 500 °C for 1 h or 0.5 h, respectively. The refractive index of glass fibers annealed at 400 °C/1 h best matched that of PMMA at 589.3 nm and 25 °C, so the composite reinforced with those fibers had the highest optical transmission. Because annealed glass fibers had a more uniform refractive index than unannealed fibers, the composites made with annealed fibers had a higher optical transmission. The mechanical strength of annealed fiber/PMMA composites decreased as the fiber annealing temperature increased. A composite containing fibers annealed at 450 °C/1 h had a tensile strength 26% lower than that of a composite made with as-pulled fibers, but 73% higher than that for unreinforced PMMA. This decrease was avoided by treating annealed fibers with HF. Composites made with annealed and HF (10 vol. %)-treated (for 30 s) glass fibers had a tensile strength (∼200 MPa) equivalent to that of the composites made with as-pulled fibers. However, as the treatment time in HF increased, the tensile strength of the composites decreased because of a significant reduction in diameter of the glass fiber which reduced the volume percent fiber in the composite.

Preparation Techniques and Property Evaluations of Highly Air Permeable Needle-Punched Geotextiles

2015 ◽  
Vol 749 ◽  
pp. 278-281
Author(s):  
Jia Horng Lin ◽  
Jing Chzi Hsieh ◽  
Jin Mao Chen ◽  
Wen Hao Hsing ◽  
Hsueh Jen Tan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Service Life ◽  
Mechanical Strength ◽  
Pore Structure ◽  
Test Results ◽  
Needle Punching ◽  
Pet Fibers ◽  
Environmental Requirements ◽  
Preparation Techniques

Geotextiles are made of polymers, and their conjunction with different processes and materials can provide geotextiles with desirable characteristics and functions, such as filtration, separation, and drainage, and thereby meets the environmental requirements. Chemical resistant and mechanical strong polymers, including polyester (PET) and polypropylene (PP), are thus used to prolong the service life of the products made by such materials. This study proposes highly air permeable geotextiles that are made with different thicknesses and various needle punching speeds, and the influences of these two variables over the pore structure and mechanical properties are then examined. PET fibers, PP fibers, and recycled Kevlar fibers are blended, followed by being needle punched with differing spaces and speeds to form geotextiles with various thicknesses and porosities. The textiles are then evaluated for their mechanical strength and porosity. The test results show that a thickness of 4.5 cm and 1.5 cm demonstrate an influence on the tensile strength of the geotextiles, which is ascribed to the webs that are incompletely needle punched. However, the excessive needle punching speed corresponding to a thickness of 0.2 cm results in a decrease in tensile strength, but there is also an increase in the porosity of the geotextiles.

Creep and Anisotropy of Free-Standing Lithium Metal Foils in an Industrial Dry Room

2021 ◽  
pp. 1-32
Author(s):  
Lara Dienemann ◽  
Anil Saigal ◽  
Michael A Zimmerman
Keyword(s):  
Mechanical Properties ◽  
Solid State ◽  
High Volume ◽  
Dominant Mode ◽  
Lithium Metal ◽  
Free Standing ◽  
Metal Anode ◽  
Lithium Metal Batteries ◽  
Lithium Metal Anode ◽  
Solid State Batteries

Abstract Commercialization of energy-dense lithium metal batteries relies on stable and uniform plating and stripping on the lithium metal anode. In electrochemical-mechanical modeling of solid-state batteries, there is a lack of consideration of specific mechanical properties of battery-grade lithium metal. Defining these characteristics is crucial for understanding how lithium ions plate on the lithium metal anode, how plating and stripping affect deformation of the anode and its interfacing material, and whether dendrites are suppressed. Recent experiments show that the dominant mode of deformation of lithium metal is creep. This study measures the time and temperature dependent mechanics of two thicknesses of commercial lithium anodes inside an industrial dry room, where battery cells are manufactured at high volume. Furthermore, a directional study examines the anisotropic microstructure of 100 µm thick lithium anodes and its effect on bulk creep mechanics. It is shown that these lithium anodes undergo plastic creep as soon as a coin cell is manufactured at a pressure of 0.30 MPa, and achieving thinner lithium foils, a critical goal for solid-state lithium batteries, is correlated to anisotropy in both lithium's microstructure and mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document