Exploring deep learning capabilities for surge predictions in coastal areas

AbstractTo improve coastal adaptation and management, it is critical to better understand and predict the characteristics of sea levels. Here, we explore the capabilities of artificial intelligence, from four deep learning methods to predict the surge component of sea-level variability based on local atmospheric conditions. We use an Artificial Neural Networks, Convolutional Neural Network, Long Short-Term Memory layer (LSTM) and a combination of the latter two (ConvLSTM), to construct ensembles of Neural Network (NN) models at 736 tide stations globally. The NN models show similar patterns of performance, with much higher skill in the mid-latitudes. Using our global model settings, the LSTM generally outperforms the other NN models. Furthermore, for 15 stations we assess the influence of adding complexity more predictor variables. This generally improves model performance but leads to substantial increases in computation time. The improvement in performance remains insufficient to fully capture observed dynamics in some regions. For example, in the tropics only modelling surges is insufficient to capture intra-annual sea level variability. While we focus on minimising mean absolute error for the full time series, the NN models presented here could be adapted for use in forecasting extreme sea levels or emergency response.

Download Full-text

Deep Learning-Based Approach to Fast Power Allocation in SISO SWIPT Systems with a Power-Splitting Scheme

Applied Sciences ◽

10.3390/app10103634 ◽

2020 ◽

Vol 10 (10) ◽

pp. 3634

Author(s):

Huynh Thanh Thien ◽

Pham-Viet Tuan ◽

Insoo Koo

Keyword(s):

Neural Network ◽

Deep Learning ◽

High Performance ◽

Short Term Memory ◽

Computation Time ◽

Power Splitting ◽

Learning Approaches ◽

Feed Forward Neural Network ◽

Transmit Power ◽

Single Input Single Output

Recently, simultaneous wireless information and power transfer (SWIPT) systems, which can supply efficiently throughput and energy, have emerged as a potential research area in fifth-generation (5G) system. In this paper, we study SWIPT with multi-user, single-input single-output (SISO) system. First, we solve the transmit power optimization problem, which provides the optimal strategy for getting minimum power while satisfying sufficient signal-to-noise ratio (SINR) and harvested energy requirements to ensure receiver circuits work in SWIPT systems where receivers are equipped with a power-splitting structure. Although optimization algorithms are able to achieve relatively high performance, they often entail a significant number of iterations, which raises many issues in computation costs and time for real-time applications. Therefore, we aim at providing a deep learning-based approach, which is a promising solution to address this challenging issue. Deep learning architectures used in this paper include a type of Deep Neural Network (DNN): the Feed-Forward Neural Network (FFNN) and three types of Recurrent Neural Network (RNN): the Layer Recurrent Network (LRN), the Nonlinear AutoRegressive network with eXogenous inputs (NARX), and Long Short-Term Memory (LSTM). Through simulations, we show that the deep learning approaches can approximate a complex optimization algorithm that optimizes transmit power in SWIPT systems with much less computation time.

Download Full-text

Sea Level Anomaly and Earthquake Predictions: Endangered Countries Prognostications

International Journal on Perceptive and Cognitive Computing ◽

10.31436/ijpcc.v6i2.154 ◽

2020 ◽

Vol 6 (2) ◽

pp. 36-41

Author(s):

Raini Hassan ◽

Abid Ebna Saif Utsha ◽

Mahfuzealahi Noman

Keyword(s):

Machine Learning ◽

Deep Learning ◽

Sea Level ◽

Short Term Memory ◽

Machine Learning Techniques ◽

Sea Level Anomaly ◽

Sea Levels ◽

Sea Level Anomalies ◽

Learning Techniques ◽

Rising Sea Levels

Natural calamities are often unforeseen and cause massive destruction. It is extremely difficult to predict natural disasters. Existing machine learning techniques are not reliable enough to find the affected countries due to earthquakes and rising sea levels. The aim of this paper is to use predictive analysis to find the countries that will be affected by earthquakes and rising sea levels. Also, the purpose is to see how machine learning techniques perform in terms of sudden calamities like earthquakes or slow calamities like rising sea level. The results was deduced by data analysis, and deep learning techniques like Long-Short Term Memory (LSTM). It was found out that using the approached method in this paper can accurately identify the countries that are going to be affected and predict both earthquake and sea level anomalies accurately. For earthquake, the model was able to capture the happening of earthquake events into a certain quarter of the year with the Root Mean Square Error (RMSE) of 0.504. And for sea level rise, the RMSE was 0.064. It was concluded that Deep learning techniques (e.g.-LSTM) work well with slow changes like sea level anomaly rather than earthquakes. The techniques used in this paper can be upgraded further in the future to find and help more endangered countries to be prepared better against these sudden calamities.

Download Full-text

Improving Sentiment Analysis using Hybrid Deep Learning Model

Recent Advances in Computer Science and Communications ◽

10.2174/2213275912666190328200012 ◽

2020 ◽

Vol 13 (4) ◽

pp. 627-640 ◽

Cited By ~ 1

Author(s):

Avinash Chandra Pandey ◽

Dharmveer Singh Rajpoot

Keyword(s):

Neural Network ◽

Deep Learning ◽

Sentiment Analysis ◽

Classification Accuracy ◽

Short Term Memory ◽

Computational Cost ◽

Extraction Process ◽

Learning Model ◽

Sentiment Classification ◽

Deep Learning Model

Background: Sentiment analysis is a contextual mining of text which determines viewpoint of users with respect to some sentimental topics commonly present at social networking websites. Twitter is one of the social sites where people express their opinion about any topic in the form of tweets. These tweets can be examined using various sentiment classification methods to find the opinion of users. Traditional sentiment analysis methods use manually extracted features for opinion classification. The manual feature extraction process is a complicated task since it requires predefined sentiment lexicons. On the other hand, deep learning methods automatically extract relevant features from data hence; they provide better performance and richer representation competency than the traditional methods. Objective: The main aim of this paper is to enhance the sentiment classification accuracy and to reduce the computational cost. Method: To achieve the objective, a hybrid deep learning model, based on convolution neural network and bi-directional long-short term memory neural network has been introduced. Results: The proposed sentiment classification method achieves the highest accuracy for the most of the datasets. Further, from the statistical analysis efficacy of the proposed method has been validated. Conclusion: Sentiment classification accuracy can be improved by creating veracious hybrid models. Moreover, performance can also be enhanced by tuning the hyper parameters of deep leaning models.

Download Full-text

Effectiveness of transfer learning for enhancing tumor classification with a convolutional neural network on frozen sections

Scientific Reports ◽

10.1038/s41598-020-78129-0 ◽

2020 ◽

Vol 10 (1) ◽

Author(s):

Young-Gon Kim ◽

Sungchul Kim ◽

Cristina Eunbee Cho ◽

In Hye Song ◽

Hee Jin Lee ◽

...

Keyword(s):

Neural Network ◽

Deep Learning ◽

Convolutional Neural Network ◽

Transfer Learning ◽

Frozen Section ◽

Medical Center ◽

External Validation ◽

Model Performance ◽

Classification Model ◽

Training Dataset

AbstractFast and accurate confirmation of metastasis on the frozen tissue section of intraoperative sentinel lymph node biopsy is an essential tool for critical surgical decisions. However, accurate diagnosis by pathologists is difficult within the time limitations. Training a robust and accurate deep learning model is also difficult owing to the limited number of frozen datasets with high quality labels. To overcome these issues, we validated the effectiveness of transfer learning from CAMELYON16 to improve performance of the convolutional neural network (CNN)-based classification model on our frozen dataset (N = 297) from Asan Medical Center (AMC). Among the 297 whole slide images (WSIs), 157 and 40 WSIs were used to train deep learning models with different dataset ratios at 2, 4, 8, 20, 40, and 100%. The remaining, i.e., 100 WSIs, were used to validate model performance in terms of patch- and slide-level classification. An additional 228 WSIs from Seoul National University Bundang Hospital (SNUBH) were used as an external validation. Three initial weights, i.e., scratch-based (random initialization), ImageNet-based, and CAMELYON16-based models were used to validate their effectiveness in external validation. In the patch-level classification results on the AMC dataset, CAMELYON16-based models trained with a small dataset (up to 40%, i.e., 62 WSIs) showed a significantly higher area under the curve (AUC) of 0.929 than those of the scratch- and ImageNet-based models at 0.897 and 0.919, respectively, while CAMELYON16-based and ImageNet-based models trained with 100% of the training dataset showed comparable AUCs at 0.944 and 0.943, respectively. For the external validation, CAMELYON16-based models showed higher AUCs than those of the scratch- and ImageNet-based models. Model performance for slide feasibility of the transfer learning to enhance model performance was validated in the case of frozen section datasets with limited numbers.

Download Full-text

Embedded Deep Learning Prototyping Approach for Cyber-Physical Systems: Smart LIDAR Case Study

Journal of Sensor and Actuator Networks ◽

10.3390/jsan10010018 ◽

2021 ◽

Vol 10 (1) ◽

pp. 18

Author(s):

Quentin Cabanes ◽

Benaoumeur Senouci ◽

Amar Ramdane-Cherif

Keyword(s):

Neural Network ◽

Deep Learning ◽

Computation Time ◽

Physical World ◽

Cyber Physical Systems ◽

Physical Systems ◽

Research Technology ◽

Standard Design ◽

Hardware Architectures ◽

Voxel Grid

Cyber-Physical Systems (CPSs) are a mature research technology topic that deals with Artificial Intelligence (AI) and Embedded Systems (ES). They interact with the physical world via sensors/actuators to solve problems in several applications (robotics, transportation, health, etc.). These CPSs deal with data analysis, which need powerful algorithms combined with robust hardware architectures. On one hand, Deep Learning (DL) is proposed as the main solution algorithm. On the other hand, the standard design and prototyping methodologies for ES are not adapted to modern DL-based CPS. In this paper, we investigate AI design for CPS around embedded DL. The main contribution of this work is threefold: (1) We define an embedded DL methodology based on a Multi-CPU/FPGA platform. (2) We propose a new hardware design architecture of a Neural Network Processor (NNP) for DL algorithms. The computation time of a feed forward sequence is estimated to 23 ns for each parameter. (3) We validate the proposed methodology and the DL-based NNP using a smart LIDAR application use-case. The input of our NNP is a voxel grid hardware computed from 3D point cloud. Finally, the results show that our NNP is able to process Dense Neural Network (DNN) architecture without bias.

Download Full-text

Multiple Pedestrians and Vehicles Tracking in Aerial Imagery Using a Convolutional Neural Network

Remote Sensing ◽

10.3390/rs13101953 ◽

2021 ◽

Vol 13 (10) ◽

pp. 1953

Author(s):

Seyed Majid Azimi ◽

Maximilian Kraus ◽

Reza Bahmanyar ◽

Peter Reinartz

Keyword(s):

Neural Network ◽

Deep Learning ◽

Convolutional Neural Network ◽

Object Tracking ◽

Short Term Memory ◽

Aerial Imagery ◽

Future Research ◽

Short Term ◽

Term Memory ◽

Long Short Term Memory

In this paper, we address various challenges in multi-pedestrian and vehicle tracking in high-resolution aerial imagery by intensive evaluation of a number of traditional and Deep Learning based Single- and Multi-Object Tracking methods. We also describe our proposed Deep Learning based Multi-Object Tracking method AerialMPTNet that fuses appearance, temporal, and graphical information using a Siamese Neural Network, a Long Short-Term Memory, and a Graph Convolutional Neural Network module for more accurate and stable tracking. Moreover, we investigate the influence of the Squeeze-and-Excitation layers and Online Hard Example Mining on the performance of AerialMPTNet. To the best of our knowledge, we are the first to use these two for regression-based Multi-Object Tracking. Additionally, we studied and compared the L1 and Huber loss functions. In our experiments, we extensively evaluate AerialMPTNet on three aerial Multi-Object Tracking datasets, namely AerialMPT and KIT AIS pedestrian and vehicle datasets. Qualitative and quantitative results show that AerialMPTNet outperforms all previous methods for the pedestrian datasets and achieves competitive results for the vehicle dataset. In addition, Long Short-Term Memory and Graph Convolutional Neural Network modules enhance the tracking performance. Moreover, using Squeeze-and-Excitation and Online Hard Example Mining significantly helps for some cases while degrades the results for other cases. In addition, according to the results, L1 yields better results with respect to Huber loss for most of the scenarios. The presented results provide a deep insight into challenges and opportunities of the aerial Multi-Object Tracking domain, paving the way for future research.

Download Full-text

Deep Learning Versus Logistic Regression to Predict Opioid Dose Reduction After Spinal Cord Stimulation

Neurosurgery ◽

10.1093/neuros/nyaa447_638 ◽

2020 ◽

Vol 67 (Supplement_1) ◽

Author(s):

Syed M Adil ◽

Lefko T Charalambous ◽

Kelly R Murphy ◽

Shervin Rahimpour ◽

Stephen C Harward ◽

...

Keyword(s):

Neural Network ◽

Spinal Cord ◽

Deep Learning ◽

Dose Reduction ◽

Spinal Cord Stimulation ◽

Network Architecture ◽

Characteristic Curve ◽

Model Performance ◽

Health Crisis ◽

Opioid Dose

Abstract INTRODUCTION Opioid misuse persists as a public health crisis affecting approximately one in four Americans.1 Spinal cord stimulation (SCS) is a neuromodulation strategy to treat chronic pain, with one goal being decreased opioid consumption. Accurate prognostication about SCS success is key in optimizing surgical decision making for both physicians and patients. Deep learning, using neural network models such as the multilayer perceptron (MLP), enables accurate prediction of non-linear patterns and has widespread applications in healthcare. METHODS The IBM MarketScan® (IBM) database was queried for all patients ≥ 18 years old undergoing SCS from January 2010 to December 2015. Patients were categorized into opioid dose groups as follows: No Use, ≤ 20 morphine milligram equivalents (MME), 20–50 MME, 50–90 MME, and >90 MME. We defined “opiate weaning” as moving into a lower opioid dose group (or remaining in the No Use group) during the 12 months following permanent SCS implantation. After pre-processing, there were 62 predictors spanning demographics, comorbidities, and pain medication history. We compared an MLP with four hidden layers to the LR model with L1 regularization. Model performance was assessed using area under the receiver operating characteristic curve (AUC) with 5-fold nested cross-validation. RESULTS Ultimately, 6,124 patients were included, of which 77% had used opioids for >90 days within the 1-year pre-SCS and 72% had used >5 types of medications during the 90 days prior to SCS. The mean age was 56 ± 13 years old. Collectively, 2,037 (33%) patients experienced opiate weaning. The AUC was 0.74 for the MLP and 0.73 for the LR model. CONCLUSION To our knowledge, we present the first use of deep learning to predict opioid weaning after SCS. Model performance was slightly better than regularized LR. Future efforts should focus on optimization of neural network architecture and hyperparameters to further improve model performance. Models should also be calibrated and externally validated on an independent dataset. Ultimately, such tools may assist both physicians and patients in predicting opioid dose reduction after SCS.

Download Full-text

Classification of Skin Disease Using Deep Learning Neural Networks with MobileNet V2 and LSTM

Sensors ◽

10.3390/s21082852 ◽

2021 ◽

Vol 21 (8) ◽

pp. 2852

Author(s):

Parvathaneni Naga Srinivasu ◽

Jalluri Gnana SivaSai ◽

Muhammad Fazal Ijaz ◽

Akash Kumar Bhoi ◽

Wonjoon Kim ◽

...

Keyword(s):

Neural Network ◽

Neural Networks ◽

Deep Learning ◽

Convolutional Neural Network ◽

Skin Disease ◽

Network Architecture ◽

Large Scale ◽

Short Term Memory ◽

Convolutional Networks ◽

Occurrence Matrix

Deep learning models are efficient in learning the features that assist in understanding complex patterns precisely. This study proposed a computerized process of classifying skin disease through deep learning based MobileNet V2 and Long Short Term Memory (LSTM). The MobileNet V2 model proved to be efficient with a better accuracy that can work on lightweight computational devices. The proposed model is efficient in maintaining stateful information for precise predictions. A grey-level co-occurrence matrix is used for assessing the progress of diseased growth. The performance has been compared against other state-of-the-art models such as Fine-Tuned Neural Networks (FTNN), Convolutional Neural Network (CNN), Very Deep Convolutional Networks for Large-Scale Image Recognition developed by Visual Geometry Group (VGG), and convolutional neural network architecture that expanded with few changes. The HAM10000 dataset is used and the proposed method has outperformed other methods with more than 85% accuracy. Its robustness in recognizing the affected region much faster with almost 2× lesser computations than the conventional MobileNet model results in minimal computational efforts. Furthermore, a mobile application is designed for instant and proper action. It helps the patient and dermatologists identify the type of disease from the affected region’s image at the initial stage of the skin disease. These findings suggest that the proposed system can help general practitioners efficiently and effectively diagnose skin conditions, thereby reducing further complications and morbidity.

Download Full-text

Real-Time Detection of Dictionary DGA Network Traffic Using Deep Learning

SN Computer Science ◽

10.1007/s42979-021-00507-w ◽

2021 ◽

Vol 2 (2) ◽

Author(s):

Kate Highnam ◽

Domenic Puzio ◽

Song Luo ◽

Nicholas R. Jennings

Keyword(s):

Neural Network ◽

Deep Learning ◽

Real Time ◽

Network Traffic ◽

Short Term Memory ◽

Domain Names ◽

Control Networks ◽

Detection Techniques ◽

Lstm Network ◽

And Control

AbstractBotnets and malware continue to avoid detection by static rule engines when using domain generation algorithms (DGAs) for callouts to unique, dynamically generated web addresses. Common DGA detection techniques fail to reliably detect DGA variants that combine random dictionary words to create domain names that closely mirror legitimate domains. To combat this, we created a novel hybrid neural network, Bilbo the “bagging” model, that analyses domains and scores the likelihood they are generated by such algorithms and therefore are potentially malicious. Bilbo is the first parallel usage of a convolutional neural network (CNN) and a long short-term memory (LSTM) network for DGA detection. Our unique architecture is found to be the most consistent in performance in terms of AUC, $$F_1$$ F 1 score, and accuracy when generalising across different dictionary DGA classification tasks compared to current state-of-the-art deep learning architectures. We validate using reverse-engineered dictionary DGA domains and detail our real-time implementation strategy for scoring real-world network logs within a large enterprise. In 4 h of actual network traffic, the model discovered at least five potential command-and-control networks that commercial vendor tools did not flag.

Download Full-text

Neural Network for Metal Detection Based on Magnetic Impedance Sensor

Sensors ◽

10.3390/s21134456 ◽

2021 ◽

Vol 21 (13) ◽

pp. 4456

Author(s):

Sungjae Ha ◽

Dongwoo Lee ◽

Hoijun Kim ◽

Soonchul Kwon ◽

EungJo Kim ◽

...

Keyword(s):

Neural Network ◽

Magnetic Field ◽

Deep Learning ◽

Short Term Memory ◽

Magnetic Impedance ◽

Detection Technology ◽

Metal Detection ◽

Long Short Term Memory ◽

Impedance Sensor ◽

The Magnetic Field

The efficiency of the metal detection method using deep learning with data obtained from multiple magnetic impedance (MI) sensors was investigated. The MI sensor is a passive sensor that detects metal objects and magnetic field changes. However, when detecting a metal object, the amount of change in the magnetic field caused by the metal is small and unstable with noise. Consequently, there is a limit to the detectable distance. To effectively detect and analyze this distance, a method using deep learning was applied. The detection performances of a convolutional neural network (CNN) and a recurrent neural network (RNN) were compared from the data extracted from a self-impedance sensor. The RNN model showed better performance than the CNN model. However, in the shallow stage, the CNN model was superior compared to the RNN model. The performance of a deep-learning-based (DLB) metal detection network using multiple MI sensors was compared and analyzed. The network was detected using long short-term memory and CNN. The performance was compared according to the number of layers and the size of the metal sheet. The results are expected to contribute to sensor-based DLB detection technology.

Download Full-text