scholarly journals A negative piezo-conductive effect from doped semiconducting polymer thin films

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Chao Yi ◽  
Lening Shen ◽  
Jie Zheng ◽  
Xiong Gong
Keyword(s):  
Thin Films ◽  
Conjugated Polymers ◽  
Working Mechanism ◽  
Semiconducting Polymer ◽  
Practical Applications ◽  
Inorganic Semiconductors ◽  
The Past ◽  
Industrial Sectors ◽  
Crystal Cells ◽  
First Time

AbstractIn the past years, piezo-conductive sensors have drawn great attention in both academic and industrial sectors. The piezo-conductive sensors made by inorganic semiconductors exhibited poor mechanical flexibility, restricting their further practical applications. In this study, we report the piezo-conductive sensors by a semiconducting polymer, poly(3,4-ethylenedioxythiophene) doped with tosylate ions (PEDOT:Tos) thin films. Systemically studies indicate that the piezo-conductive response of the PEDOT:Tos thin films is originated from the deformation of the PEDOT crystal cells and the stretched π–π distances induced by Tos. Moreover, the negative piezo-conductive effect, for the first time, is observed from PEDOT:Tos thin film under the pressure. A working mechanism is further proposed to interpret the transient from a positive to a negative piezo-conductive response within the PEDOT:Tos thin films. Our studies offer a facile route to approach effective piezo-conductive sensors based on conjugated polymers.

scholarly journals A Negative Piezo-conductive Effect From Doped Semiconducting Polymer Thin Films

2021 ◽  
Author(s):  
Chao Yi ◽  
Lening Shen ◽  
Jie Zheng ◽  
Xiong Gong
Keyword(s):  
Thin Films ◽  
Conjugated Polymers ◽  
Working Mechanism ◽  
Semiconducting Polymer ◽  
Practical Applications ◽  
Inorganic Semiconductors ◽  
The Past ◽  
Industrial Sectors ◽  
Crystal Cells ◽  
First Time

Abstract In the past years, piezo-conductive sensors have drawn great attention in both academic and industrial sectors. The piezo-conductive sensors made by inorganic semiconductors exhibited poor mechanical flexibility, restricting their further practical applications. In this study, we report the piezo-conductive sensors by a semiconducting polymer, poly(3,4-ethylenedioxythiophene) doped with tosylate ions (PEDOT:Tos) thin films. Systemically studies indicate that the piezo-conductive response of the PEDOT:Tos thin films is originated from the deformation of the PEDOT crystal cells and the stretched π-π distances induced by Tos. Moreover, the negative piezo-conductive effect, for the first time, is observed from PEDOT:Tos thin film under the pressure. A working mechanism is further proposed to interpret the transient from a positive to a negative piezo-conductive response within the PEDOT:Tos thin films. Our studies offer a facile route to approach effective piezo-conductive sensors based on conjugated polymers.

scholarly journals Interaction of light with lead halide perovskites: A review

2019 ◽  
Vol 2 (2) ◽  
pp. 67
Author(s):  
Zhiya Dang ◽  
Duc Anh Dinh
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Light Illumination ◽  
Low Light ◽  
Practical Applications ◽  
Halide Perovskites ◽  
Halide Perovskite ◽  
First Time ◽  
Lead Halide ◽  
Sample Environment

Lead halide perovskites are the new rising generation of semiconductor materials due to their unique optical and electrical properties. The investigation of the interaction of halide perovskites and light is a key issue not only for understanding their photophysics but also for practical applications. Hence, tremendous efforts have been devoted to this topic and brunch into two: (i) decomposition of the halide perovskites thin films under light illumination; and (ii) influence of light soaking on their photoluminescence (PL) properties. In this review, we for the first time thoroughly compare the illumination conditions and the sample environment to correlate the PL changes and decomposition of perovskite under light illumination. In the case of vacuum and dry nitrogen, PL of the halide perovskite (MAPbI3–xClx, MAPbBr3–xClx, MAPbI3) thin films decreases due to the defects induced by light illumination, and under high excitations, the thin film even decomposes. In the presence of oxygen or moisture, light induces the PL enhancement of halide perovskite (MAPbI3) thin films at low light illumination, while increasing the excitation, which causes the PL to quench and perovskite thin film to decompose. In the case of mixed halide perovskite ((MA)Pb(BrxI1-x)3) light induces reversible segregation of Br domains and I domains. 

High thermochromic performance of Fe/Mg co-doped VO2 thin films for smart window applications

2018 ◽  
Vol 6 (24) ◽  
pp. 6502-6509 ◽  
Author(s):  
Chunhui Ji ◽  
Zhiming Wu ◽  
Lulu Lu ◽  
Xuefei Wu ◽  
Jun Wang ◽  
...  
Keyword(s):  
Thin Films ◽  
New Method ◽  
Smart Window ◽  
Smart Windows ◽  
Practical Applications ◽  
Co Doping ◽  
Window Applications ◽  
Vo2 Thin Films ◽  
First Time ◽  
Co Doped

A new method, Fe/Mg co-doping, is proposed for the first time to optimize thermochromic VO2 and the promising performance of VO2-based smart windows for practical applications is successfully achieved.

scholarly journals Interaction of light with lead halide perovskites: A review

2018 ◽  
Vol 1 (4) ◽  
Author(s):  
Zhiya Dang 1 ◽  
Duc Anh Dinh 1
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Light Illumination ◽  
Low Light ◽  
Practical Applications ◽  
Halide Perovskites ◽  
Halide Perovskite ◽  
First Time ◽  
Lead Halide ◽  
Sample Environment

Lead halide perovskites are the new rising generation of semiconductor materials due to theirunique optical and electrical properties. The investigation of the interaction of halide perovskites and light is a key issue not only for understanding theirphotophysicsbut also for practical applications. Hence, tremendous efforts have been devoted to this topic andbrunch into two:(i)decompositionof the halide perovskites thin films under light illumination and(ii)influence of light soaking on their photoluminescence (PL) properties. In this review, we for the first time thoroughly compare the illumination conditions and the sample environment to correlate the PL changes and decomposition of perovskite under light illumination. Inthe case of vacuum and dry nitrogen, PL of the halide perovskite ( PbI3–xClx, PbBr3–xClx, MAPbI3) thin films decreases due to the defects induced by light illumination, and under high excitations the thin film even decomposes. In thepresence of oxygen or moisture,light induces the PL enhancement of halide perovskite (MAPbI3) thin films at low light illumination, while increasing the excitationcauses the PL to quench and perovskite thin film to decompose. In the case of mixed halide perovskite (MAPb(BrxI1-x)3) light inducesreversible segregation of Br domains and I domains. 

A technique to prepare cross-sectional TEM specimens of semiconducting devices

1986 ◽  
Vol 44 ◽  
pp. 742-743
Author(s):  
A. K. Rai ◽  
P. P. Pronko
Keyword(s):  
Thin Films ◽  
Surface Region ◽  
Sample Surface ◽  
Specific Region ◽  
Cross Sectional ◽  
Thin Sections ◽  
The Past ◽  
Device Structures ◽  
Ion Implanted

Several techniques have been reported in the past to prepare cross(x)-sectional TEM specimen. These methods are applicable when the sample surface is uniform. Examples of samples having uniform surfaces are ion implanted samples, thin films deposited on substrates and epilayers grown on substrates. Once device structures are fabricated on the surfaces of appropriate materials these surfaces will no longer remain uniform. For samples with uniform surfaces it does not matter which part of the surface region remains in the thin sections of the x-sectional TEM specimen since it is similar everywhere. However, in order to study a specific region of a device employing x-sectional TEM, one has to make sure that the desired region is thinned. In the present work a simple way to obtain thin sections of desired device region is described.

Application of Thin Films of Conjugated Polymers in Novel LED's and Liquid Crystal 'Light Valves'

1997 ◽  
Author(s):  
A. G. MacDiarmid ◽  
H. L. Wang ◽  
F. Huang ◽  
J. K. Avlyanov ◽  
P. C. Wang
Keyword(s):  
Thin Films ◽  
Liquid Crystal ◽  
Conjugated Polymers

scholarly journals Latest Developments in Insect Sex Pheromone Research and Its Application in Agricultural Pest Management

Insects ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 484
Author(s):  
Syed Arif Hussain Rizvi ◽  
Justin George ◽  
Gadi V. P. Reddy ◽  
Xinnian Zeng ◽  
Angel Guerrero
Keyword(s):  
Sex Pheromone ◽  
Pest Management ◽  
Interdisciplinary Approach ◽  
Pheromone Biosynthesis ◽  
Insect Pheromones ◽  
Agricultural Pest ◽  
Practical Applications ◽  
The Past ◽  
Significant Research ◽  
Recent Developments

Since the first identification of the silkworm moth sex pheromone in 1959, significant research has been reported on identifying and unravelling the sex pheromone mechanisms of hundreds of insect species. In the past two decades, the number of research studies on new insect pheromones, pheromone biosynthesis, mode of action, peripheral olfactory and neural mechanisms, and their practical applications in Integrated Pest Management has increased dramatically. An interdisciplinary approach that uses the advances and new techniques in analytical chemistry, chemical ecology, neurophysiology, genetics, and evolutionary and molecular biology has helped us to better understand the pheromone perception mechanisms and its practical application in agricultural pest management. In this review, we present the most recent developments in pheromone research and its application in the past two decades.

scholarly journals Stabilization of Ferroelectric Phase in Highly Oriented Quinuclidinium Perrhenate (HQReO4) Thin Films

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2126
Author(s):  
Junyoung Lee ◽  
Woojun Seol ◽  
Gopinathan Anoop ◽  
Shibnath Samanta ◽  
Sanjith Unithrattil ◽  
...  
Keyword(s):  
Thin Films ◽  
Solution Process ◽  
Intermediate Temperature ◽  
Perovskite Oxide ◽  
Temperature Phase ◽  
Polar Phase ◽  
Practical Applications ◽  
Temperature Range ◽  
Potential Alternative ◽  
Temperature Window

The low-temperature processability of molecular ferroelectric (FE) crystals makes them a potential alternative for perovskite oxide-based ferroelectric thin films. Quinuclidinium perrhenate (HQReO4) is one such molecular FE crystal that exhibits ferroelectricity when crystallized in an intermediate temperature phase (ITP). However, bulk HQReO4 crystals exhibit ferroelectricity only for a narrow temperature window (22 K), above and below which the polar phase transforms to a non-FE phase. The FE phase or ITP of HQReO4 should be stabilized in a much wider temperature range for practical applications. Here, to stabilize the FE phase (ITP) in a wider temperature range, highly oriented thin films of HQReO4 were prepared using a simple solution process. A slow evaporation method was adapted for drying the HQReO4 thin films to control the morphology and the temperature window. The temperature window of the intermediate temperature FE phase was successfully widened up to 35 K by merely varying the film drying temperature between 333 and 353 K. The strategy of stabilizing the FE phase in a wider temperature range can be adapted to other molecular FE materials to realize flexible electronic devices.

scholarly journals A novel and potentially scalable CVD-based route towards SnO2:Mo thin films as transparent conducting oxides

2021 ◽  
Author(s):  
Tianlei Ma ◽  
Marek Nikiel ◽  
Andrew G. Thomas ◽  
Mohamed Missous ◽  
David J. Lewis
Keyword(s):  
Thin Films ◽  
Photoelectron Spectroscopy ◽  
Mixed Valence ◽  
Chemical Vapour ◽  
X Ray Diffraction ◽  
X Ray ◽  
Conducting Oxides ◽  
Valence States ◽  
3 Omega ◽  
First Time

AbstractIn this report, we prepared transparent and conducting undoped and molybdenum-doped tin oxide (Mo–SnO2) thin films by aerosol-assisted chemical vapour deposition (AACVD). The relationship between the precursor concentration in the feed and in the resulting films was studied by energy-dispersive X-ray spectroscopy, suggesting that the efficiency of doping is quantitative and that this method could potentially impart exquisite control over dopant levels. All SnO2 films were in tetragonal structure as confirmed by powder X-ray diffraction measurements. X-ray photoelectron spectroscopy characterisation indicated for the first time that Mo ions were in mixed valence states of Mo(VI) and Mo(V) on the surface. Incorporation of Mo6+ resulted in the lowest resistivity of $$7.3 \times 10^{{ - 3}} \Omega \,{\text{cm}}$$ 7.3 × 10 - 3 Ω cm , compared to pure SnO2 films with resistivities of $$4.3\left( 0 \right) \times 10^{{ - 2}} \Omega \,{\text{cm}}$$ 4.3 0 × 10 - 2 Ω cm . Meanwhile, a high transmittance of 83% in the visible light range was also acquired. This work presents a comprehensive investigation into impact of Mo doping on SnO2 films synthesised by AACVD for the first time and establishes the potential for scalable deposition of SnO2:Mo thin films in TCO manufacturing. Graphical abstract

scholarly journals Reactive Dual Magnetron Sputtering: A Fast Method for Preparing Stoichiometric Microcrystalline ZnWO4 Thin Films

Surfaces ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 106-114
Author(s):  
Yannick Hermans ◽  
Faraz Mehmood ◽  
Kerstin Lakus-Wollny ◽  
Jan P. Hofmann ◽  
Thomas Mayer ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Photoelectron Spectroscopy ◽  
Fast Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Post Annealing ◽  
Rf Signal ◽  
First Time

Thin films of ZnWO4, a promising photocatalytic and scintillator material, were deposited for the first time using a reactive dual magnetron sputtering procedure. A ZnO target was operated using an RF signal, and a W target was operated using a DC signal. The power on the ZnO target was changed so that it would match the sputtering rate of the W target operated at 25 W. The effects of the process parameters were characterized using optical spectroscopy, X-ray diffraction, and scanning electron microscopy, including energy dispersive X-ray spectroscopy as well as X-ray photoelectron spectroscopy. It was found that stoichiometric microcrystalline ZnWO4 thin films could be obtained, by operating the ZnO target during the sputtering procedure at a power of 55 W and by post-annealing the resulting thin films for at least 10 h at 600 °C. As FTO coated glass substrates were used, annealing led as well to the incorporation of Na, resulting in n+ doped ZnWO4 thin films.

Sign in / Sign up

Export Citation Format

Share Document