Facile graphene transfer directly to target substrates with a reusable metal catalyst

Nanoscale ◽  
2015 ◽  
Vol 7 (36) ◽  
pp. 14807-14812 ◽  
Author(s):  
D. L. Mafra ◽  
T. Ming ◽  
J. Kong
Keyword(s):  
Flexible Electronics ◽  
Chemical Etching ◽  
Low Cost ◽  
Metal Catalyst ◽  
Scale Production ◽  
Large Area ◽  
High Quality ◽  
Roll To Roll ◽  
Graphene Transfer ◽  
Industrial Scale Production

We explore a CVD transfer technique that abandons both the intermediate membrane and chemical etching of the metal catalyst. This method is fast, simple and is a necessary route towards roll-to-roll production of large-area CVD graphene sheets at high quality and low cost. Such integration is a step forward to the economical and industrial scale production of graphene and enables technology for flexible electronics and optoelectronics.

scholarly journals Potential challenges and approaches to develop the large area efficient monolithic perovskite solar cells (mPSCs)

2019 ◽  
Vol 30 (23) ◽  
pp. 20320-20329
Author(s):  
Arti Mishra ◽  
Zubair Ahmad
Keyword(s):  
Solar Cells ◽  
Architectural Design ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Cost Effective ◽  
Scale Production ◽  
Large Area ◽  
The Stability ◽  
Future Direction ◽  
Industrial Scale Production

Abstract The next generation technologies based on perovskite solar cells (PSCs) are targeted to develop a true low cost, low tech, widely deployable, easily manufactured and reliable photovoltaics. After the extremely fast evolution in the last few years on the laboratory-scale, PSCs power conversion efficiency (PCE) reached over 24%. However, the widespread use of PSCs requires addressing the stability and industrial scale production issues. Carbon based monolithic perovskite solar cells (mPSCs) are one of the most promising candidates for the commercialization of the PSCs. mPSCs possess a unique architectural design and pave an easy way to produce large area and cost-effective fabrication of the PSCs. In this article, recent progress in the field of mPSCs, challenges and strategies for their improvement are briefly reviewed. Also, we focus on the predominant implementations of recent techniques in the fabrication of the mPSCs to improve their performance. This review is intended to serve as a future direction guide for the scientists who are looking forward to developing more reliable, cost-effective and large area PSCs.

An Investigation onto Polydimethylsiloxane (PDMS) Printing Plate of Multiple Functional Solid Line by Flexographic

2013 ◽  
Vol 844 ◽  
pp. 158-161 ◽  
Author(s):  
M.I. Maksud ◽  
Mohd Sallehuddin Yusof ◽  
M. Mahadi Abdul Jamil
Keyword(s):  
Laser Ablation ◽  
Line Width ◽  
High Speed ◽  
Printed Electronics ◽  
Low Cost ◽  
Flexible Substrates ◽  
Large Area ◽  
Printing Plate ◽  
Roll To Roll ◽  
Printing Processes

Recently low cost production is vital to produce printed electronics by roll to roll manufacturing printing process like a flexographic. Flexographic has a high speed technique which commonly used for printing onto large area flexible substrates. However, the minimum feature sizes achieved with roll to roll printing processes, such as flexographic is in the range of fifty microns. The main contribution of this limitation is photopolymer flexographic plate unable to be produced finer micron range due to film that made by Laser Ablation Mask (LAMs) technology not sufficiently robust and consequently at micron ranges line will not be formed on the printing plate. Hence, polydimethylsiloxane (PDMS) is used instead of photopolymer. Printing trial had been conducted and multiple solid lines successfully printed for below fifty microns line width with no interference between two adjacent lines of the printed images.

scholarly journals Extensive Screening of Green Solvents for Safe and Sustainable UiO-66 Synthesis

2020 ◽  
Author(s):  
Diletta Morelli Venturi ◽  
Filippo Campana ◽  
Fabio Marmottini ◽  
Ferdinando Costantino ◽  
Luigi Vaccaro
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Dimethyl Formamide ◽  
Scale Production ◽  
Green Solvents ◽  
High Quality ◽  
Color Code ◽  
Large Scale Production ◽  
Metal Organic

<p>Zirconium based Metal-Organic Framework UiO-66 is to date considered one of the benchmark compound among stable MOFs and it has attracted a huge attention for its employment in many strategic applications. Large scale production of UiO-66 for industrial purposes requires the use of safe and green solvents, fulfilling the green chemistry principles and able to replace the use of <i>N,N</i>-Dimethyl-Formamide (DMF), which, despite its toxicity, is still considered the most efficient solvent for obtaining UiO-66 of high quality. Herein we report on a survey of about 40 different solvents with different polarity, boiling point and acidity, used for the laboratory scale synthesis of high quality UiO-66 crystals. The solvents were chosen according the European REACH Regulation 1907/2006 among those having low cost, low toxicity and fully biodegradable. Concerning MOF synthesis, the relevant parameters chosen for establishing the quality of the results obtained are the degree are the crystallinity, microporosity and specific surface area, yield and solvent recyclability. Taking into account also the chemical physical properties of all the solvents, a color code was assigned in order to give a final green assessment for the UiO-66 synthesis. Defectivity of the obtained products, the use of acidic modulators and the use of alternative Zr-salts have been also taken into consideration. Preliminary results lead to conclude that GVL (γ-valerolactone) is among the most promising solvents for replacing DMF in UiO-66 MOF synthesis. </p>

scholarly journals Extensive Screening of Green Solvents for Safe and Sustainable UiO-66 Synthesis

2020 ◽  
Author(s):  
Diletta Morelli Venturi ◽  
Filippo Campana ◽  
Fabio Marmottini ◽  
Ferdinando Costantino ◽  
Luigi Vaccaro
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Dimethyl Formamide ◽  
Scale Production ◽  
Green Solvents ◽  
High Quality ◽  
Color Code ◽  
Large Scale Production ◽  
Metal Organic

<p>Zirconium based Metal-Organic Framework UiO-66 is to date considered one of the benchmark compound among stable MOFs and it has attracted a huge attention for its employment in many strategic applications. Large scale production of UiO-66 for industrial purposes requires the use of safe and green solvents, fulfilling the green chemistry principles and able to replace the use of <i>N,N</i>-Dimethyl-Formamide (DMF), which, despite its toxicity, is still considered the most efficient solvent for obtaining UiO-66 of high quality. Herein we report on a survey of about 40 different solvents with different polarity, boiling point and acidity, used for the laboratory scale synthesis of high quality UiO-66 crystals. The solvents were chosen according the European REACH Regulation 1907/2006 among those having low cost, low toxicity and fully biodegradable. Concerning MOF synthesis, the relevant parameters chosen for establishing the quality of the results obtained are the degree are the crystallinity, microporosity and specific surface area, yield and solvent recyclability. Taking into account also the chemical physical properties of all the solvents, a color code was assigned in order to give a final green assessment for the UiO-66 synthesis. Defectivity of the obtained products, the use of acidic modulators and the use of alternative Zr-salts have been also taken into consideration. Preliminary results lead to conclude that GVL (γ-valerolactone) is among the most promising solvents for replacing DMF in UiO-66 MOF synthesis. </p>

Formation of Through-Glass-Via (TGV) by Photo-Chemical Etching with High Selectivity

2012 ◽  
Vol 2012 (1) ◽  
pp. 000785-000792
Author(s):  
Zingway Pei ◽  
Jui-Po Sun ◽  
Hsin-Chen Lai ◽  
Pei-Jer Tzeng ◽  
Cha-Hsin Lin ◽  
...  
Keyword(s):  
Chemical Etching ◽  
High Selectivity ◽  
Laser Energy ◽  
Low Cost ◽  
Etching Rate ◽  
Ultra Violet ◽  
Amorphous Region ◽  
Large Area ◽  
Micro Cracks ◽  
Via Hole

In this work, we utilize a photo-chemical etching (PCE) method to form through-glass-via (TGV). The PCE is a low cost, damage-free and potentially large-area method for TGV formation. An ultra-violet (355 nm) pulse laser was used to illuminate the glass surface. The illuminated region will crystallize after thermal annealing in a furnace. The crystallized glass shows much faster etching rate than the amorphous region in HF solution. For a relatively thick (600 nm) glass, a via-hole with diameter of around 60 μm was demonstrated in laser energy of 11 J/cm2. No laser damages were observed. In comparison, at least 10 times higher energy was required to drill a glass directly. Micro-cracks were form around the glass-via. In addition, a 40 selectivity was achieved to the crystallized and amorphous region. This simple and useful method paves a straight road for 3-D integration.

scholarly journals Reshaping Hybrid Perovskites Emission with Flexible Polymer Microcavities

2020 ◽  
Vol 230 ◽  
pp. 00006
Author(s):  
Paola Lova ◽  
Paolo Giusto ◽  
Francesco Di Stasio ◽  
Giovanni Manfredi ◽  
Giuseppe M. Paternò ◽  
...  
Keyword(s):  
Thin Films ◽  
Photonic Crystals ◽  
Low Cost ◽  
Scale Production ◽  
Large Area ◽  
Light Emitting Devices ◽  
Flexible Polymer ◽  
Hybrid Perovskite ◽  
Wide Range ◽  
Solution Processable

Thanks to versatile optoelectronic properties solution processable perovskites have attracted increasing interest as active materials in photovoltaic and light emitting devices. However, the deposition of perovskite thin films necessitates wide range solvents that are incompatible with many other solution-processable media, including polymers that are usually dissolved by the perovskite solvents. In this work, we demonstrate that hybrid perovskite thin films can be coupled with all polymer planar photonic crystals with different approaches to achieve emission intensity enhancement and reshaping using different approaches. The possibility to control and modify the emission spectrum of a solution processable perovskite via a simple spun-cast polymer structure is indeed of great interest in optoelectronic applications requiring high color purity or emission directionality. Furthermore, thanks to the ease of fabrication and scalability of solution-processed photonic crystals, this approach could enable industrial scale production of low-cost, large area, lightweight and flexible polymer-perovskite lighting devices, which may be tuned without resorting to compositional engineering.

scholarly journals Enhanced Surface Properties of Light-Trapping Si Nanowires Using Synergetic Effects of Metal-Assisted and Anisotropic Chemical Etchings

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Youngsoon Jeong ◽  
Chanwoo Hong ◽  
Yeong Hun Jung ◽  
Rashida Akter ◽  
Hana Yoon ◽  
...  
Keyword(s):  
Interfacial Energy ◽  
Chemical Etching ◽  
Low Cost ◽  
Light Trapping ◽  
Si Nanowires ◽  
Si Substrate ◽  
Large Area ◽  
Aspect Ratios ◽  
Energy States ◽  
Si Nanostructures

Abstract Metal-assisted chemical etching (MACE) has been widely explored for developing silicon (Si)-based energy and optical devices with its benefits for low-cost and large-area fabrication of Si nanostructures of high aspect ratios. Surface structures and properties of Si nanostructures fabricated through MACE are significantly affected by experimental and environmental conditions of etchings. Herein, we showed that surfaces and interfacial energy states of fabricated Si nanowires can be critically affected by oxidants of MACE etching solutions. Surfaces of fabricated Si nanowires are porous and their tips are fully covered with lots of Si nano-sized grains. Strongly increased photoluminescence (PL) intensities, compared to that of the crystalline Si substrate, are observed for MACE-fabricated Si nanowires due to interfacial energy states of Si and SiOx of Si nano-sized grains. These Si grains can be completely removed from the nanowires by an additional etching process of the anisotropic chemical etching (ACE) of Si to taper the nanowires and enhance light trapping of the nanowires. Compared with the MACE-fabricated Si nanowires, ACE-fabricated tapered Si nanowires have similar Raman and PL spectra to those of the crystalline Si substrate, indicating the successful removal of Si grains from the nanowire surfaces by the ACE process.

scholarly journals Sustainable Fully Printed UV Sensors on Cork Using Zinc Oxide/Ethylcellulose Inks

Micromachines ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 601 ◽  
Author(s):  
Joana Figueira ◽  
Cristina Gaspar ◽  
José Tiago Carvalho ◽  
Joana Loureiro ◽  
Elvira Fortunato ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Flexible Electronics ◽  
Large Scale ◽  
Low Cost ◽  
Scale Production ◽  
Large Scale Production ◽  
Production Techniques ◽  
Uv Lamp ◽  
Uv Sensors ◽  
The Internet Of Things

Low-cost and large-scale production techniques for flexible electronics have evolved greatly in recent years, having great impact in applications such as wearable technology and the internet of things. In this work, we demonstrate fully screen-printed UV photodetectors, successfully fabricated at a low temperature on a cork substrate, using as the active layer a mixture of zinc oxide nanoparticles and ethylcellulose. The photoresponse under irradiation with a UV lamp with peak emission at 302 nm exhibited a quasi-quadratic behavior directly proportional to the applied voltage, with a photocurrent of about 5.5 and 20 μA when applying 1.5 V and 5 V, respectively. The dark current stayed below 150 nA, while the rise and falling times were, respectively, below 5 and 2 s for both applied voltages. The performance was stable over continuous operation and showed a degradation of only 9% after 100 bending cycles in a 45 mm radius test cylinder. These are promising results regarding the use of this type of sensor in wearable applications such as cork hats, bracelets, or bags.

scholarly journals Spray Coated Colloidal Quantum Dot Films for Broadband Photodetectors

Nanomaterials ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1738
Author(s):  
Kaixuan Song ◽  
Jifeng Yuan ◽  
Ting Shen ◽  
Jiuyao Du ◽  
Ruiqi Guo ◽  
...  
Keyword(s):  
Optoelectronic Devices ◽  
Spray Coating ◽  
Adhesive Force ◽  
Active Area ◽  
Scale Production ◽  
Fabrication Technology ◽  
Large Area ◽  
Large Size ◽  
Colloidal Quantum Dot ◽  
Industrial Scale Production

A technique for scalable spray coating of colloidal CdSeTe quantum dots (QDs) for photovoltaics and photodetector applications is presented. A mixture solvent with water and ethanol was introduced to enhance the adhesive force between QDs and the substrate interface. The performance of the detector reached the highest values with 40 spray coating cycles of QD deposition. The photodetectors without bias voltage showed broadband response in the wavelength range of 300–800 nm, and high responsivity of 15 mA/W, detectivity of more than 1011 Jones and rise time of 0.04 s. A large size QD-logo pattern film (10 × 10 cm2) prepared by the spray coating process displayed excellent uniformity of thickness and absorbance. The large area detectors (the active area 1 cm2) showed almost the same performance as the typical laboratory-size ones (the active area 0.1 cm2). Our study demonstrates that the spray coating is a very promising film fabrication technology for the industrial-scale production of optoelectronic devices.

Recent advances in flexible perovskite solar cells

2015 ◽  
Vol 51 (79) ◽  
pp. 14696-14707 ◽  
Author(s):  
B. Susrutha ◽  
Lingamallu Giribabu ◽  
Surya Prakash Singh
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Large Area ◽  
Roll To Roll ◽  
Recent Developments ◽  
Reduced Dimension ◽  
Thin Film Photovoltaics

Flexible thin-film photovoltaics facilitate the implementation of solar devices into portable, reduced dimension, and roll-to-roll modules. In this review, we describe recent developments in the fabrication of flexible perovskite solar cells that are low cost and highly efficient and can be used for the fabrication of large-area and lightweight solar cell devices.

Sign in / Sign up

Export Citation Format

Share Document