A calibrated UV-LED based light source for water purification and characterisation of photocatalysis

2017 ◽  
Vol 16 (11) ◽  
pp. 1690-1699 ◽  
Author(s):  
A. Sergejevs ◽  
C. T. Clarke ◽  
D. W. E. Allsopp ◽  
J. Marugan ◽  
A. Jaroenworaluck ◽  
...  
Keyword(s):  
Light Source ◽  
Water Purification ◽  
Industrial Process ◽  
Cost Effective ◽  
Uv Led ◽  
Water Cleaning ◽  
And Performance ◽  
Light Engine

Photocatalysis can become a cost effective industrial process for water cleaning. This paper describes the design and performance of a novel LED-based light engine for this purpose.

scholarly journals Recent Advances in Conventional Methods and Electrochemical Aptasensors for Mycotoxin Detection

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1437
Author(s):  
Jing Yi Ong ◽  
Andrew Pike ◽  
Ling Ling Tan
Keyword(s):  
Quantitative Analysis ◽  
Animal Feed ◽  
Cost Effective ◽  
Preventive Action ◽  
High Affinity ◽  
Recent Advances ◽  
Recognition Elements ◽  
Key Features ◽  
Pre Treatment ◽  
And Performance

The presence of mycotoxins in foodstuffs and feedstuffs is a serious concern for human health. The detection of mycotoxins is therefore necessary as a preventive action to avoid the harmful contamination of foodstuffs and animal feed. In comparison with the considerable expense of treating contaminated foodstuffs, early detection is a cost-effective way to ensure food safety. The high affinity of bio-recognition molecules to mycotoxins has led to the development of affinity columns for sample pre-treatment and the development of biosensors for the quantitative analysis of mycotoxins. Aptamers are a very attractive class of biological receptors that are currently in great demand for the development of new biosensors. In this review, the improvement in the materials and methodology, and the working principles and performance of both conventional and recently developed methods are discussed. The key features and applications of the fundamental recognition elements, such as antibodies and aptamers are addressed. Recent advances in aptasensors that are based on different electrochemical (EC) transducers are reviewed in detail, especially from the perspective of the diagnostic mechanism; in addition, a brief introduction of some commercially available mycotoxin detection kits is provided.

scholarly journals Analysis and Optimization of a Novel Hexagonal Waveguide Concentrator for Solar Thermal Applications

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2146
Author(s):  
Karunesh Kant ◽  
Karthik Nithyanandam ◽  
Ranga Pitchumani
Keyword(s):  
Industrial Process ◽  
Cost Effective ◽  
Solar Irradiation ◽  
Maintenance Cost ◽  
Solar Concentrator ◽  
Thermal Desalination ◽  
Process Heat ◽  
Solar Thermal Applications ◽  
The Cost ◽  
Operation And Maintenance Cost

This paper analyzes a novel, cost-effective planar waveguide solar concentrator design that is inspired by cellular hexagonal structures in nature with the benefits of facile installation and low operation and maintenance cost. A coupled thermal and optical analysis of solar irradiation through an ideal hexagonal waveguide concentrator integrated with a linear receiver is presented, along with a cost analysis methodology, to establish the upper limit of performance. The techno-economic model, coupled with numerical optimization, is used to determine designs that maximized power density and minimized the cost of heat in the temperature range of 100–250 °C, which constitutes more than half of the industrial process heat demand. Depending on the incident solar irradiation and the application temperature, the cost of heat for the optimal design configuration ranged between 0.1–0.27 $/W and 0.075–0.18 $/W for waveguide made of ZK7 glass and polycarbonate, respectively. A techno-economic analysis showed the potential of the technology to achieve cost as low as 80 $/m2 and 61 $/m2 for waveguide made of ZK7 glass and polycarbonate material, respectively, which is less than half the cost of state-of-the-art parabolic trough concentrators. Overall, the hexagonal waveguide solar concentrator technology shows immense potential for decarbonizing the industrial process heat and thermal desalination sectors.

scholarly journals Using Aerial and Vehicular NFV Infrastructures to Agilely Create Vertical Services

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1342
Author(s):  
Borja Nogales ◽  
Miguel Silva ◽  
Ivan Vidal ◽  
Miguel Luís ◽  
Francisco Valera ◽  
...  
Keyword(s):  
Ad Hoc Network ◽  
Ad Hoc ◽  
Cost Effective ◽  
Network Services ◽  
Network Function Virtualization ◽  
Mobile Environments ◽  
Network Resources ◽  
The Public ◽  
Network Function ◽  
And Performance

5G communications have become an enabler for the creation of new and more complex networking scenarios, bringing together different vertical ecosystems. Such behavior has been fostered by the network function virtualization (NFV) concept, where the orchestration and virtualization capabilities allow the possibility of dynamically supplying network resources according to its needs. Nevertheless, the integration and performance of heterogeneous network environments, each one supported by a different provider, and with specific characteristics and requirements, in a single NFV framework is not straightforward. In this work we propose an NFV-based framework capable of supporting the flexible, cost-effective deployment of vertical services, through the integration of two distinguished mobile environments and their networks: small sized unmanned aerial vehicles (SUAVs), supporting a flying ad hoc network (FANET) and vehicles, promoting a vehicular ad hoc network (VANET). In this context, a use case involving the public safety vertical will be used as an illustrative example to showcase the potential of this framework. This work also includes the technical implementation details of the framework proposed, allowing to analyse and discuss the delays on the network services deployment process. The results show that the deployment times can be significantly reduced through a distributed VNF configuration function based on the publish–subscribe model.

Mechanical Characterization of UV Photopolymerized PMMA with Different Photo-Initiator Concentration

2021 ◽  
Vol 903 ◽  
pp. 11-16
Author(s):  
M.A. Manjunath ◽  
K. Naveen ◽  
Prakash Vinod ◽  
N. Balashanmugam ◽  
M.R. Shankar
Keyword(s):  
Mechanical Properties ◽  
Light Source ◽  
Polymethyl Methacrylate ◽  
Biomedical Applications ◽  
Mechanical Characterization ◽  
Uv Light ◽  
Curing Time ◽  
Uv Led ◽  
Pmma Resin

Polymethyl methacrylate (PMMA) is one among few known photo-polymeric resin useful in lithography for fabricating structures having better mechanical properties to meet the requirement in electronics and biomedical applications. This study explores the effect of Photo Initiator (PI) concentration and also curing time on strength and hardness of Polymethyl methacrylate (PMMA) obtained by UV photopolymerization of Methyl methacrylate (MMA) monomer. The UV LED light source operating at the wavelength of 364 nm is used with Benzoin Ethyl Ether (BEE) as photo initiator. The curing of PMMA resin is supported with peltier cooling device placed at the bottom of the UV light source. The characterisation study of UV photo cured PMMA is analysed through nano indenter (Agilent Technologies-G200). The current work investigates the influence of PI concentration and curing time in achieving maximum mechanical properties for UV photopolymerized PMMA.

scholarly journals A novel industrial control architecture based on Software-Defined Network

2018 ◽  
Vol 51 (7-8) ◽  
pp. 360-367
Author(s):  
Geng Liang ◽  
Wen Li
Keyword(s):  
Large Scale ◽  
Service Management ◽  
Virtual Machines ◽  
Industrial Process ◽  
Control Network ◽  
Software Defined Network ◽  
Intelligent Network ◽  
Industrial Control ◽  
Control Functions ◽  
And Performance

Traditionally, routers and other network devices encompass both data and control functions in most large enterprise networks, making it difficult to adjust the network infrastructure and operation to large-scale addition of end systems, virtual machines, and virtual networks in industrial comprehensive automation. A network organizing technique that has come to recent prominence is the Software-Defined Network (SDN). A novel SDN based industrial control network (SDNICN) was proposed in this paper. Intelligent network components are included in a SDNICN. Switches in SDNICN provided fundamental network interconnection for the whole industrial control network. Network controller is used for data transmission, forwarding and routing control between different layers. Service Management Center (SMC) is essentially responsible for managing various services used in industrial process control. SDNICN can not only greatly improve the flexibility and performance of industrial control network but also meet the intelligence and informatization of the future industry.

Solar Photovoltaic Water Pumping to Alleviate Drought in Remote Locations

2006 ◽  
Author(s):  
Kala Meah ◽  
Steven Fletcher ◽  
Yu Wan ◽  
Sadrul Ula
Keyword(s):  
Performance Monitoring ◽  
Cost Effective ◽  
Small Scale ◽  
Solar Water ◽  
Small Water ◽  
Water Pumping ◽  
Western Us ◽  
Water Right ◽  
And Performance ◽  
The University

Many parts of the western US is rural in nature and consequently do not have electrical distribution lines in many parts of farms and ranches. Distribution line extension costs can run from $15,000 to $25,000 per mile, thereby making availability of electricity to small water pumping projects economically unattractive. Solar photo-voltaic (PV) powered water pumping is more cost effective in these small scale applications. Many western states including Wyoming are passing through fifth year of drought with the consequent shortages of water for many applications. Wyoming State Climatologist is predicting a possible 5–10 years of drought. Drought impacts the surface water right away, while it takes much longer to impact the underground aquifers. To mitigate the effect on the livestock and wildlife, Wyoming Governor Dave Freudenthal initiated a solar water pumping initiative in cooperation with the University of Wyoming, County Conservation Districts, Rural Electric Cooperatives, and ranching organizations. Solar water pumping has several advantages over traditional systems; for example, diesel or propane engines require not only expensive fuels, they also create noise and air pollution in many remote pristine areas. Solar systems are environment friendly, low maintenance and have no fuel cost. In this paper the design, installation and performance monitoring of the solar system for small scale remote water pumping will be presented.

Powder Metallurgy Aluminum Alloys: Structure and Porosity

2019 ◽  
Author(s):  
Will Judge ◽  
Georges Kipouros
Keyword(s):  
Powder Metallurgy ◽  
Aluminum Alloys ◽  
Material Properties ◽  
Cost Effective ◽  
High Reactivity ◽  
Commercial Production ◽  
Processing Conditions ◽  
Near Net Shape ◽  
And Performance ◽  
Production Conditions

The production of aluminum alloys through powder metallurgy (PM) processes allows for the manufacture of net- or near-net-shape components in a cost-effective and sustainable manner. The high reactivity of aluminum metal, however, complicates PM processing, and special attention must be given to certain steps during production, particularly sintering. PM processing conditions strongly affect the structure and porosity of aluminum PM alloys, which ultimately determine their material properties and performance. In this article, the fundamental aspects of the commercial production of aluminum PM alloys are presented, along with the effects of production conditions on the structure and porosity of aluminum PM alloys. The properties and performance of aluminum PM alloys are then analyzed and interpreted with respect to their structure and porosity.

Sign in / Sign up

Export Citation Format

Share Document