scholarly journals An adjustable parameter water hammer wave hose testbench

2021 ◽  
Vol 233 ◽  
pp. 01057
Author(s):  
Zhe Wang ◽  
Bensong Xia ◽  
Xiajie Jing ◽  
Keli Xing
Keyword(s):  
Pressure Rise ◽  
Test System ◽  
Water Hammer ◽  
Simulation Software ◽  
Servo Valve ◽  
Rise Rate ◽  
Pressure Cylinder ◽  
Cylinder Piston ◽  
Main Components

In this paper, based on the servo valve controlled pressure cylinder, a scheme of hydraulic pipeline adjustable parameters water hammer wave test system is proposed. By changing the quality of pressure cylinder piston rod and controlling the opening of servo valve, the overshoot, pressure rise rate and oscillation of water hammer wave can be controlled. On this basis, based on AMESim simulation software, the paper studies the influence of different parameters of pressure cylinder and servo valve on water hammer wave, which provides the basis for the selection of main components. Finally, the experimental research is carried out on the designed system, and the results are consistent with the simulation results. The generated water hammer wave meets the requirements of the test standard, which proves that the hydraulic adjustable parameters water hammer test system developed in this paper is successful and feasible.

Experimental Study of Explosion Pressure Characteristics of Methane under High Temperature Conditions

2014 ◽  
Vol 687-691 ◽  
pp. 148-152 ◽  
Author(s):  
Run Zhi Li ◽  
Rong Jun Si ◽  
Yan Song Zhang
Keyword(s):  
Environmental Temperature ◽  
Pressure Rise ◽  
Test System ◽  
Coal Bed ◽  
Maximum Pressure ◽  
Explosion Pressure ◽  
Pressure Rise Rate ◽  
Maximum Explosion Pressure ◽  
Rise Rate ◽  
Pressure Characteristics

Methane explosion pressure characteristics under the condition of different temperatures (25°C-200 °C) were studied by the special environment 20L explosion characteristics test system. By the experimental results, in the case of other conditions unchanged, with the increase of environmental temperature, the maximum explosion pressure of the optimum explosion concentration decrease, the maximum explosion pressure and the reciprocal of environmental temperature show linear attenuation law, the maximum pressure rise rate is not influenced by environmental temperature basically; Outside the scope of explosion limits at normal temperature and pressure, with the increase of environmental temperature, no explosion methane-air mixture are explosive gradually, the maximum explosion pressure and maximum pressure rise rate are in the relationship of different exponential growth with the increase of ambient temperature. The conclusions provide an important theoretical basis for prevent mine gas explosion accidents and coal bed methane safely use.

Strategi Penyelenggaraan Diklat Dan Ujian Sertifikasi Keahlian Pengadaan Barang/ Jasa Pemerintah Di Lingkungan Pemerintah Kabupaten Magelang

2017 ◽  
Vol 24 (1) ◽  
pp. 87-106
Author(s):  
Wiharyanto Wiharyanto
Keyword(s):  
Education And Training ◽  
Test System ◽  
Civil Servants ◽  
Quality Of Education ◽  
Alternative Formulation ◽  
Computer Assisted ◽  
Certification Exams ◽  
The Government ◽  
And Training

The study aims to analyze about the low graduation and certification exam training participants of the procurement of goods / services of the government and its contributing factors, and formulate a strategy of education and training and skills certification exams procurement of goods / services of the government. Collecting data using the method of study documentation, interviews, and questionnaires. Is the official source of information on the structural and functional Regional Employment Board, as well as the participants of the training and skills certification exams procurement of goods / services of the government in Magelang regency government environment. Analysis using 4 quadrant SWOT analysis, to determine the issue or strategic factors in improving the quality of education and training and skills certification exams procurement of government goods / services within the Government of Magelang regency. The results show organizer position is in quadrant I, which is supporting the growth strategy, with 3 alternative formulation strategies that improve the quality of education and training and skills certification exams procurement of government goods / services, and conducts certification examination of the procurement of government goods / services with computer assisted test system (CAT). Based on the research recommendations formulated advice to the organizing committee, namely: of prospective participants of the training and skills certification exams procurement of goods / services the government should consider the motivation of civil servants, is examinees who have attended training in the same period of the year, the need for simulation procurement of goods / services significantly, an additional allocation of training time, giving sanction to civil servants who have not passed the exam, the provision of adequate classroom space with the number of participants of each class are proportional, as well as explore the evaluation of education and training and skills certification exams procurement of goods / services for Government of participants.

Principles for construction of bioluminescent enzyme biotests for analysis of complex media

2019 ◽  
Vol 485 (2) ◽  
pp. 229-233
Author(s):  
V. P. Kalyabina ◽  
E. N. Esimbekova ◽  
I. G. Torgashina ◽  
K. V. Kopylova ◽  
V. A. Kratasyuk
Keyword(s):  
Fruits And Vegetables ◽  
Rapid Assessment ◽  
Test System ◽  
Maximum Sensitivity ◽  
Toxic Chemicals ◽  
Complex Media ◽  
Luminescent Bacterium ◽  
Chemical Safety ◽  
Minimal Impact

We formulated the principles of designing bioluminescent enzyme tests for assessing the quality of complex media which consist in providing the maximum sensitivity to potentially toxic chemicals at a minimal impact of uncontaminated complex media. The developed principles served as a basis for designing a new bioluminescent method for an integrated rapid assessment of chemical safety of fruits and vegetables which is based on using the luminescent bacterium enzymes (NAD(P)H:FMN oxidoreductase and luciferase) as a test system.

Methodical approach to the assessment of the educational migration environment of the population of the Carpathian region

2019 ◽  
pp. 37-48
Author(s):  
Lyubov Semiv
Keyword(s):  
Institutional Conditions ◽  
Carpathian Region ◽  
Research Activities ◽  
Methodical Approach ◽  
Synthetic Indicator ◽  
Industry Collaboration ◽  
Migration Potential ◽  
Educational Migration ◽  
Main Components

The role and importance of the educational migration environment in activating migration movements of the population is described. The main components of the educational migration environment of the population are identified, and their features are outlined. Indicators have been proposed and the conditions for the formation of the educational migration environment of the population have been determined. It is proved that «freedom of knowledge movement» motivates students, teachers and researchers to combine educational and research activities with future employment abroad. The processes of educational migration in the form of cross-border education and academic mobility are presented. The concept of educational migration environment is defined and five main components of its formation are described: quantitative measurement of educational migration potential; quality of the academic environment; motivational conditions; opportunities for universities and industry collaboration in research; institutional conditions in the educational sphere. The list of indicators offered by the Ukrainian statistics is provided for quantitative representation of each component of the educational migration. Based on the method of multidimensional (cluster) analysis, the regional index of formation of educational migration environment is calculated. Using this method allows to move from the assessment of educational migration environment on 28 indicators to the construction of one synthetic indicator. Application of methodical approach allows to see the place of the region by the important parameters of development of the environment of educational migration of the population, to evaluate the attractiveness, opportunities and threats of formation of this environment in the regional dimension. It is proved that the «most favorable» environment in the Carpathian region has the Lviv region (4th place in Ukraine). Other regions of the Ukrainian Carpathians occupy in the ranking the lower places: respectively Ivano-Frankivsk (15th place), Chernivtsi (21st place), Transcarpathian region (24th place).

New Monitoring Strategy for the Quality Control in the Processing Practice of Scutellariae Radix

2020 ◽  
Vol 16 (3) ◽  
pp. 303-311
Author(s):  
Qi Huang ◽  
Chunsong Cheng ◽  
Lili Li ◽  
Daiyin Peng ◽  
Cun Zhang
Keyword(s):  
Quality Control ◽  
Monitoring Strategy ◽  
Scutellariae Radix ◽  
Chromatographic Fingerprints ◽  
New Strategy ◽  
Processed Products ◽  
Main Components ◽  
Processing Techniques ◽  
Multivariate Monitoring

Background: Scutellariae Radix (Huangqin) is commonly processed into 3 products for different clinical applications. However, a simple analytical method for quality control has rarely been reported to quickly estimate the degree of processing Huangqin or distinguish differently processed products or unqualified Huangqin products. Objective: To study a new strategy for quality control in the processing practice of Huangqin. Methods: Seven kinds of flavonoids that mainly exist in Huangqin were determined by HPLC-DAD. Chromatographic fingerprints were established to study the variation and discipline of the 3 processed products of Huangqin. PCA and OPLS-DA were used to classify differently processed products of Huangqin. Results: The results showed that baicalin and wogonoside were the main components in the crude and the alcohol Huangqin herb while baicalein and wogonin mainly existed in carbonized Huangqin. The results of mathematical statistics revealed that the processing techniques can make the quality of medicinal materials more uniform. Conclusion: This multivariate monitoring strategy is suitable for quality control in the processing of Huangqin.

scholarly journals Determination of Environmental Factors for the Implementation of the Exploitability Index in Industrial Aggregate Mining Using Multi-Criteria Analysis

2021 ◽  
Vol 10 (4) ◽  
pp. 196
Author(s):  
Julio Manuel de Luis-Ruiz ◽  
Benito Ramiro Salas-Menocal ◽  
Gema Fernández-Maroto ◽  
Rubén Pérez-Álvarez ◽  
Raúl Pereda-García
Keyword(s):  
Environmental Factors ◽  
Environmental Factor ◽  
Human Life ◽  
Accurate Estimation ◽  
Analytic Hierarchy ◽  
Main Components ◽  
Hierarchy Process ◽  
Made In

The quality of human life is linked to the exploitation of mining resources. The Exploitability Index (EI) assesses the actual possibilities to enable a mine according to several factors. The environment is one of the most constraining ones, but its analysis is made in a shallow way. This research is focused on its determination, according to a new preliminary methodology that sets the main components of the environmental impact related to the development of an exploitation of industrial minerals and its weighting according to the Analytic Hierarchy Process (AHP). It is applied to the case of the ophitic outcrops in Cantabria (Spain). Twelve components are proposed and weighted with the AHP and an algorithm that allows for assigning a normalized value for the environmental factor to each deposit. Geographic Information Systems (GISs) are applied, allowing us to map a large number of components of the environmental factors. This provides a much more accurate estimation of the environmental factor, with respect to reality, and improves the traditional methodology in a substantial way. It can be established as a methodology for mining spaces planning, but it is suitable for other contexts, and it raises developing the environmental analysis before selecting the outcrop to be exploited.

A Simulation Software for the Evaluation of Vulnerabilities in Reputation Management Systems

2021 ◽  
Vol 37 (1-4) ◽  
pp. 1-30
Author(s):  
Vincenzo Agate ◽  
Alessandra De Paola ◽  
Giuseppe Lo Re ◽  
Marco Morana
Keyword(s):  
Quality Of Service ◽  
Distributed Systems ◽  
State Of The Art ◽  
Simulation Software ◽  
Reputation Management ◽  
Management Systems ◽  
Security Attacks ◽  
Vulnerability Evaluation ◽  
Multi Agent

Multi-agent distributed systems are characterized by autonomous entities that interact with each other to provide, and/or request, different kinds of services. In several contexts, especially when a reward is offered according to the quality of service, individual agents (or coordinated groups) may act in a selfish way. To prevent such behaviours, distributed Reputation Management Systems (RMSs) provide every agent with the capability of computing the reputation of the others according to direct past interactions, as well as indirect opinions reported by their neighbourhood. This last point introduces a weakness on gossiped information that makes RMSs vulnerable to malicious agents’ intent on disseminating false reputation values. Given the variety of application scenarios in which RMSs can be adopted, as well as the multitude of behaviours that agents can implement, designers need RMS evaluation tools that allow them to predict the robustness of the system to security attacks, before its actual deployment. To this aim, we present a simulation software for the vulnerability evaluation of RMSs and illustrate three case studies in which this tool was effectively used to model and assess state-of-the-art RMSs.

scholarly journals Analysis of ergonomic and unergonomic human lifting behaviors by using Inertial Measurement Units

2017 ◽  
Vol 3 (1) ◽  
pp. 7-10 ◽  
Author(s):  
Jan Kuschan ◽  
Henning Schmidt ◽  
Jörg Krüger
Keyword(s):  
Quality Of Life ◽  
Machine Learning ◽  
Angular Velocity ◽  
Musculoskeletal System ◽  
Occupational Diseases ◽  
Inertial Measurement Units ◽  
Inertial Measurement ◽  
Measurement Units ◽  
Main Components

Abstract:This paper presents an analysis of two distinct human lifting movements regarding acceleration and angular velocity. For the first movement, the ergonomic one, the test persons produced the lifting power by squatting down, bending at the hips and knees only. Whereas performing the unergonomic one they bent forward lifting the box mainly with their backs. The measurements were taken by using a vest equipped with five Inertial Measurement Units (IMU) with 9 Dimensions of Freedom (DOF) each. In the following the IMU data captured for these two movements will be evaluated using statistics and visualized. It will also be discussed with respect to their suitability as features for further machine learning classifications. The reason for observing these movements is that occupational diseases of the musculoskeletal system lead to a reduction of the workers’ quality of life and extra costs for companies. Therefore, a vest, called CareJack, was designed to give the worker a real-time feedback about his ergonomic state while working. The CareJack is an approach to reduce the risk of spinal and back diseases. This paper will also present the idea behind it as well as its main components.

Vibration analysis and combustion parameter evaluation of CI engine based on Fourier Decomposition Method

2021 ◽  
pp. 146808742098819
Author(s):  
Wang Yang ◽  
Cheng Yong
Keyword(s):  
Vibration Analysis ◽  
Decomposition Method ◽  
Combustion Process ◽  
Pressure Rise ◽  
Maximum Pressure ◽  
Vibration Signals ◽  
Loop Control ◽  
Fourier Decomposition ◽  
Surface Vibration ◽  
Rise Rate

As a non-intrusive method for engine working condition detection, the engine surface vibration contains rich information about the combustion process and has great potential for the closed-loop control of engines. However, the measured engine surface vibration signals are usually induced by combustion as well as non-combustion excitations and are difficult to be utilized directly. To evaluate some combustion parameters from engine surface vibration, the tests were carried out on a single-cylinder diesel engine and a new method called Fourier Decomposition Method (FDM) was used to extract combustion induced vibration. Simulated and test results verified the ability of the FDM for engine vibration analysis. Based on the extracted vibration signals, the methods for identifying start of combustion, location of maximum pressure rise rate, and location of peak pressure were proposed. The cycle-by-cycle analysis of the results show that the parameters identified based on vibration and in-cylinder pressure have the similar trends, and it suggests that the proposed FDM-based methods can be used for extracting combustion induced vibrations and identifying the combustion parameters.

Research on the Optimal Design Method of the Main Components for the Wheelchair Pickup

2013 ◽  
Vol 791-793 ◽  
pp. 799-802
Author(s):  
Ya Ping Wang ◽  
H.R. Shi ◽  
L. Gao ◽  
Z. Wang ◽  
X.Y. Jia ◽  
...  
Keyword(s):  
Parametric Design ◽  
Design Method ◽  
Basic Function ◽  
Design Parameters ◽  
Algorithm Optimization ◽  
Optimization Analysis ◽  
Research Designs ◽  
Optimal Design Method ◽  
Main Components

With the increasing of the aging of population all over the world, and With the inconvenience coming from diseases and damage, there will be more and more people using the wheelchair as a tool for transport. When it cant be short of the wheelchair in the daily life, the addition of the function will bring the elevation of the quality of life for the unfortunate. Staring with this purpose, the research designs a pickup with planetary bevel gear for the wheelchair. After determining the basic function of the wheelchair aids, the study determines the design parameters by using the knowledge of parametric design and completes the model for the system with Pro/E, on the other hand, it completes key components optimization analysis which is based on genetic algorithm optimization.

Sign in / Sign up

Export Citation Format

Share Document