Rice husk admixture’s effect on the compressive strength characteristics of Klang Valley’s clayey soil

2021 ◽  
Author(s):  
Yamin Nanda Ko ◽  
Zeety Md. Yusof ◽  
Salihah Surol ◽  
Noor Sahidah Samsudin
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Clayey Soil ◽  
Strength Characteristics

scholarly journals Influence of Lime, Rice Husk Ash and Coconut Fibre on Strength Properties of Subgrade

2020 ◽  
Vol 9 (8) ◽  
pp. 767-772
Keyword(s):  
Rice Husk ◽  
Rice Husk Ash ◽  
Clayey Soil ◽  
Strength Properties ◽  
Strength Characteristics ◽  
Soil Stability ◽  
Dry Density ◽  
Subgrade Soil ◽  
Adjustment Strategies ◽  
Coconut Fibre

Soil stability is a significant criterion in the field of development, for soil which needs adequate steadiness, different adjustment strategies can be embraced. The entrenched methods of soil adjustment regularly utilize such establishing operators like cement. Substitution of solidifying substance with commercial or agriculture outcome is profoundly attractive. Rice husk ash is an extremely prospective agriculture dissipates as pozzolanic materials that bring about a prevalent property after joined with lime. Also, coconut fibre is well known for its durability and high resistance and gives well establishing results when combined with lime and rice husk ash. This study worked on the experimental investigation of clayey soil with admixtures like lime, rice husk ash and coconut fibre. This study included the calculation of properties of the soil as consistency limits and strength characteristics. Clay type of soil is used in this study. In view of compaction, expansion of lime, RHA and coconut fibre diminishes the dry density and expands the moisture content. From the perspective of strength characteristics and economical terms, expansion of 6% lime, 8 % RHA and 1 % coconut fibre are prescribed as ideal value for subgrade soil adjustment

scholarly journals Preliminary Study on the Utilization of RHA as a Performance Enhancer for Rubber Mortar

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3216
Author(s):  
Jin Li ◽  
Peiyuan Chen ◽  
Haibing Cai ◽  
Ying Xu ◽  
Chunchao Li
Keyword(s):  
Compressive Strength ◽  
Mechanical Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Capillary Absorption ◽  
Optimal Dosage ◽  
Positive Effects ◽  
Waste Rubber ◽  
Chloride Resistance ◽  
Preliminary Study

In this study, rice husk ash (RHA) was explored as a strength enhancer for mortars containing waste rubber. The effects of RHA on the flow, mechanical strength, chloride resistance, and capillary absorption of rubber mortar were investigated by substituting up to 20% cement with RHA. The experimental results showed that the incorporation of rubber into mortar could be safely achieved by adding RHA as a cement substitute by up to 20% without compromising the compressive strength of mortar. Moreover, the RHA also exerted positive effects on the enhancement of the chloride resistance as well as the capillary absorption of rubber mortars, for which 15% RHA was found to be the optimal dosage.

scholarly journals Characterization and Comparison Research on Composite of Alluvial Clayey Soil Modified with Fine Aggregates of Construction Waste and Fly Ash

2021 ◽  
Vol 28 (1) ◽  
pp. 83-95
Author(s):  
Qu Jili ◽  
Wang Junfeng ◽  
Batugin Andrian ◽  
Zhu Hao
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Unconfined Compressive Strength ◽  
Clayey Soil ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Construction Waste ◽  
Comparison Research ◽  
Fine Aggregates ◽  
Optimum Water Content

Abstract Fine aggregates of construction waste and fly ash were selected as additives to modify the characteristics of Shanghai clayey soil as a composite. The laboratory tests on consistency index, maximum dry density, and unconfined compressive strength were carried out mainly for the purpose of comparing the modifying effect on the composite from fine aggregates of construction waste with that from fly ash. It is mainly concluded from test results that the liquid and plastic limit of the composites increase with the content of two additives. But their maximum dry density all decreases with the additive content. However, fine aggregates of construction waste can increase the optimum water content of the composites, while fly ash on the contrary. Finally, although the two additive all can increase the unconfined compressive strength of composites, fly ash has better effect. The current conclusions are also compared with previous studies, which indicates that the current research results are not completely the same as those from other researchers.

scholarly journals Simultaneous effects of rice husk silica and silicon carbide whiskers on the mechanical properties and morphology of sodium geopolymer

2020 ◽  
Vol 54 (29) ◽  
pp. 4611-4620 ◽  
Author(s):  
Akm Samsur Rahman ◽  
Chirag Shah ◽  
Nikhil Gupta
Keyword(s):  
Silicon Carbide ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Silica Nanoparticles ◽  
Rice Husk ◽  
Silicon Carbide Whiskers ◽  
Short Beam ◽  
Spherical Silica ◽  
Beam Shear ◽  
Strength Improvement

The current research is focused on developing a geopolymer binder using rice husk ash–derived silica nanoparticles. Four types of rice husks were collected directly from various rice fields of Bangladesh in order to evaluate the pozzolanic activity and compatibility of the derived rice husk ashes with precursors of sodium-based geopolymers. Silicon carbide whiskers were introduced into sodium-based geopolymers in order to evaluate the response of silicon carbide whiskers to the interfacial bonding and strength of sodium-based geopolymers along with rice husk ashes. Compression, flexural and short beam shear tests were performed to investigate the synergistic effect of rice husk ashes–derived silica and commercially available silicon carbide whiskers. Results show that rice husk ashes–derived spherical silica nanoparticles reduced nano-porosity of the geopolymers by ∼20% and doubled the compressive strength. The simultaneous additions of rice husk ashes and silicon carbide whiskers resulted in flexural strength improvement by ∼27% and ∼97%, respectively. The increase in compressive strength due to the inclusion of silica nanoparticles is related to the reduction in porosity. The increase in flexural strength due to simultaneous inclusion of silica and silicon carbide whiskers suggest that silica particles are compatible with the metakaolin-based geopolymers, which is effective in consolidation. Finally, microscopy suggest that silicon carbide whiskers are effective in increasing bridged network and crack resistance.

Physical Properties of Cement Mortar Containing Waste Ash

2015 ◽  
Vol 804 ◽  
pp. 129-132
Author(s):  
Sumrerng Rukzon ◽  
Prinya Chindaprasirt
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Cement Mortar ◽  
Ash Content ◽  
Water Requirement ◽  
Test Results ◽  
Pozzolanic Material ◽  
Materials Used

This research studies the potential for using waste ash from industrial and agricultural by-products as a pozzolanic material. Classified fly ash (FA) and ground rice husk ash (RA) were the materials used. Water requirement, compressive strength and porosity of cement mortar were investigated. Test results indicated that FA and RA (waste ash) have a high potential to be used as a good pozzolanic material. The water requirement of mortar mix decreases with the increases in fly ash content. For ground rice husk ash (RA), the water requirement of mortar mix increases with the increases in rice husk ash content. In addition, the reduction in porosity was associated with the increase in compressive strength.

scholarly journals Strength and Durability Performance of Alkali-Activated Rice Husk Ash Geopolymer Mortar

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Yun Yong Kim ◽  
Byung-Jae Lee ◽  
Velu Saraswathy ◽  
Seung-Jun Kwon
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Polymerization Reaction ◽  
Strength Development ◽  
Geopolymer Concrete ◽  
Portland Cement Concrete ◽  
Mix Proportion ◽  
Strength And Durability ◽  
Alkali Activated

This paper describes the experimental investigation carried out to develop the geopolymer concrete based on alkali-activated rice husk ash (RHA) by sodium hydroxide with sodium silicate. Effect on method of curing and concentration of NaOH on compressive strength as well as the optimum mix proportion of geopolymer mortar was investigated. It is possible to achieve compressive strengths of 31 N/mm2and 45 N/mm2, respectively for the 10 M alkali-activated geopolymer mortar after 7 and 28 days of casting when cured for 24 hours at 60°C. Results indicated that the increase in curing period and concentration of alkali activator increased the compressive strength. Durability studies were carried out in acid and sulfate media such as H2SO4, HCl, Na2SO4, and MgSO4environments and found that geopolymer concrete showed very less weight loss when compared to steam-cured mortar specimens. In addition, fluorescent optical microscopy and X-ray diffraction (XRD) studies have shown the formation of new peaks and enhanced the polymerization reaction which is responsible for strength development and hence RHA has great potential as a substitute for ordinary Portland cement concrete.

Experimental study on strength of cement stabilized clay

2005 ◽  
Vol 3 (2) ◽  
pp. 116-126 ◽  
Author(s):  
Woo‐Sik Kim ◽  
Nguyen Minh Tam ◽  
Du‐Hwoe Jung
Keyword(s):  
Compressive Strength ◽  
Soil Type ◽  
Unconfined Compressive Strength ◽  
Weight Ratio ◽  
Dry Weight ◽  
Strength Characteristics ◽  
Curing Time ◽  
Compression Tests ◽  
Soil Cement ◽  
Mixing Method

This paper describes the effect of factors on the strength characteristics of cement treated clay from laboratory tests performed on cement mixed clay specimens. It is considered that several factors such as soil type, sample preparing method, quantity of binder, curing time, etc. can have an effect on strength characteristics of cement stabilized clay. A series of unconfined compression tests have been performed on samples prepared with different conditions. The results indicated that soil type, mixing method, curing time, dry weight ratio of cement to clay (Aw), and water‐clay to cement (wc/c) ratio were main factors which can have an influence on unconfined compressive strength, modulus of elasticity, and failure strain of cement stabilized clay. Unconfined compressive strength of soil‐cement samples prepared from dry mixing method was higher than those prepared from wet mixing method.

scholarly journals Mechanical Properties of High Strength Concrete Containing Nano SiO2 Made from Rice Husk Ash in Southern Vietnam

Crystals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 932
Author(s):  
Huu-Bang Tran ◽  
Van-Bach Le ◽  
Vu To-Anh Phan
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
High Strength Concrete ◽  
Rice Husk Ash ◽  
Chloride Ion ◽  
High Strength ◽  
Ion Permeability ◽  
Strength Concrete ◽  
Nano Sio2 ◽  
Southern Vietnam

This paper presents the experimental results of the production of Nano-SiO2 (NS) from rice husk ash (RHA) and the engineering properties of High Strength Concrete (HSC) containing various NS contents. Firstly, the mesoporous silica nanoparticles were effectively modulated from RHA using NaOH solution, and subsequently precipitated with HCl solution until the pH value reached 3. The optimum synthesis for the manufacture of SiO2 nanoparticles in the weight ratio of RHA/NaOH was 1:2.4, and the product was calcined at 550 °C for 2 h. The EDX, XRD, SEM, TEM, FT-IR, and BET techniques were used to characterize the NS products. Results revealed that the characteristics of the obtained NS were satisfactory for civil engineering materials. Secondly, the HSC was manufactured with the aforementioned NS contents. NS particles were added to HSC at various replacements of 0, 0.5, 1.0, 1.5, 2.0, and 2.5% by the mass of the binder. The water-to-binder ratio was remained at 0.3 for all mixes. The specimens were cured for 3, 7, 28, 25 days under 25 ± 2 °C and a relative humidity of 95% before testing compressive and flexural strengths. Chloride ion permeability was investigated at 28 and 56 days. Results indicated that the addition of NS dramatically enhanced compressive strength, flexural strength, chloride ion resistance, and reduced chloride ion permeability compared to control concrete. The optimal NS content was found at 1.5%, which yielded the highest strength and lowest chloride ion permeability. Next, the development of flexural and compressive strengths with an age curing of 3–28 days can be analytically described by a logarithmic equation with R2 ≥ 0.74. The ACI code was used, and the compressive strength at t-day was determined based on 28 days with R2 ≥ 0.95. The study is expected to solve the redundancy of waste RHA in southern Vietnam by making RHA a helpful additive when producing high-strength concrete and contributing meaningfully to a sustainable environment.

Sign in / Sign up

Export Citation Format

Share Document