Constraints to achieving high potential yield of wheat in a temperate, high-rainfall environment in south-eastern Australia

2011 ◽  
Vol 62 (2) ◽  
pp. 125 ◽  
Author(s):  
Tina Botwright Acuña ◽  
Geoff Dean ◽  
Penny Riffkin

Average wheat yields in the high-rainfall zone (HRZ) of southern Australia are predicted to be around 10 t ha–1, yet most regions fall short through a lack of locally adapted cultivars or abiotic stress that constrains yield. Wheat yields in Tasmania can be variable but have exceeded this potential yield in some field trials and have thus approached that of other traditionally high-yielding HRZ environments such as northern Europe. A contributing factor to high wheat yields in Tasmania is the cool-temperate climate, which tends not to have extremes in temperature (cold, heat) as may be experienced in HRZ environments elsewhere. Hence an understanding of crop growth, development and yield of wheat of locally adapted wheat cultivars in Tasmania may improve our understanding of the basis of yield formation in other HRZ in Australia. This was evaluated by conducting an analysis for adaptive response of grain yield in 10 wheat genotypes to a range of 14 environments that were favourable for wheat production or experienced constraints to growth. Crop growth and yield formation was then examined in detail for all or a subset of these genotypes in three field trials with contrasting environments, two of which included a time of sowing (TOS) treatment. Environment accounted for around 90% of the sum of squares (SS) in the multi-site analysis of yield. Six environment groups were identified using cluster analysis, two of which were clearly separated in response to frost at flowering or putative biotic stress, which constrained yield to 1.8 and 6.8 t ha–1, respectively. Waterlogging was also a significant abiotic stress in one of the TOS field trials. The late-flowering cultivar Tennant had the highest yield in the presence of waterlogging and by avoiding frost at flowering, although it suffered a yield penalty of 35 and 66%, respectively, compared with the average across environments. The highest-yielding genotypes averaged 8 t ha–1 across environments and included Alberic, the breeding line K37.18 and the new release Revenue. In the detailed experiments on crop growth and development, high grain yields of 10 t ha–1 in Mackellar appeared to be due to increased grains ear–1, resistance to barley yellow dwarf virus and possibly higher radiation-use efficiency, although the latter needs to be confirmed. There was little genotype × environment interaction for grain yield, hence wheat breeders can have a relatively high level of confidence that genetic material with high yield potential should rank consistently across Tasmanian environments. Results presented in the paper will be useful in developing management and breeding strategies to increase potential yield across the HRZ of southern Australia.

Agronomy ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 2382
Author(s):  
Jana Reinhardt ◽  
Pia Hilgert ◽  
Moritz Von Cossel

Industrial crop cultivation on marginal agricultural land limits indirect land-use change effects that pose a threat to food security. This review compiles results from 91 published crop-specific field trial datasets spanning 12 relevant industrial crops and discusses their suitability for cultivation on unfavorable soil types (USTs). It was shown that the perennial species Miscanthus (Miscanthus Andersson) and reed canary grass (Phalaris arundinacea L.) performed well on USTs with both high clay and/or high sand contents. Information on stoniness (particles sizes > 2 mm), where mentioned, was limited. It was found to have only a small impact on biological yield potential, though it was not possible to assess the impact on mechanization as would be used at a commercial scale. For soils with extreme clay or sand contents, half of the crops showed moderate suitability. The large yield variations within and between crops revealed large knowledge gaps in the combined effects of crop type and agronomy on USTs. Therefore, more field trials are needed on diverse USTs in different climates with better equipment and more consistent measurements to improve the accuracy of potential yield predictions spatially and temporally. Additionally, larger trials are needed to optimize cultivation and harvesting.


2015 ◽  
Vol 66 (4) ◽  
pp. 349 ◽  
Author(s):  
Julianne M. Lilley ◽  
Lindsay W. Bell ◽  
John A. Kirkegaard

Recent expansion of cropping into Australia’s high-rainfall zone (HRZ) has involved dual-purpose crops suited to long growing seasons that produce both forage and grain. Early adoption of dual-purpose cropping involved cereals; however, dual-purpose canola (Brassica napus) can provide grazing and grain and a break crop for cereals and grass-based pastures. Grain yield and grazing potential of canola (up until bud-visible stage) were simulated, using APSIM, for four canola cultivars at 13 locations across Australia’s HRZ over 50 years. The influence of sowing date (2-weekly sowing dates from early March to late June), nitrogen (N) availability at sowing (50, 150 and 250 kg N/ha), and crop density (20, 40, 60, 80 plants/m2) on forage and grain production was explored in a factorial combination with the four canola cultivars. The cultivars represented winter, winter × spring intermediate, slow spring, and fast spring cultivars, which differed in response to vernalisation and photoperiod. Overall, there was significant potential for dual-purpose use of winter and winter × spring cultivars in all regions across Australia’s HRZ. Mean simulated potential yields exceeded 4.0 t/ha at most locations, with highest mean simulated grain yields (4.5–5.0 t/ha) in southern Victoria and lower yields (3.3–4.0 t/ha) in central and northern New South Wales. Winter cultivars sown early (March–mid-April) provided most forage (>2000 dry sheep equivalent (DSE) grazing days/ha) at most locations because of the extended vegetative stage linked to the high vernalisation requirement. At locations with Mediterranean climates, the low frequency (<30% of years) of early sowing opportunities before mid-April limited the utility of winter cultivars. Winter × spring cultivars (not yet commercially available), which have an intermediate phenology, had a longer, more reliable sowing window, high grazing potential (up to 1800 DSE-days/ha) and high grain-yield potential. Spring cultivars provided less, but had commercially useful grazing opportunities (300–700 DSE-days/ha) and similar yields to early-sown cultivars. Significant unrealised potential for dual-purpose canola crops of winter × spring and slow spring cultivars was suggested in the south-west of Western Australia, on the Northern Tablelands and Slopes of New South Wales and in southern Queensland. The simulations emphasised the importance of early sowing, adequate N supply and sowing density to maximise grazing potential from dual-purpose crops.


2020 ◽  
Vol 21 (20) ◽  
pp. 7593
Author(s):  
Fabrice Ntakirutimana ◽  
Wengang Xie

Awns, which are either bristles or hair-like outgrowths of lemmas in the florets, are one of the typical morphological characteristics of grass species. These stiff structures contribute to grain dispersal and burial and fend off animal predators. However, their phenotypic and genetic associations with traits deciding potential yield and quality are not fully understood. Awns appear to improve photosynthesis, provide assimilates for grain filling, thus contributing to the final grain yield, especially under temperature- and water-stress conditions. Long awns, however, represent a competing sink with developing kernels for photosynthates, which can reduce grain yield under favorable conditions. In addition, long awns can hamper postharvest handling, storage, and processing activities. Overall, little is known about the elusive role of awns, thus, this review summarizes what is known about the effect of awns on grain yield and biomass yield, grain nutritional value, and forage-quality attributes. The influence of awns on the agronomic performance of grasses seems to be associated with environmental and genetic factors and varies in different stages of plant development. The contribution of awns to yield traits and quality features previously documented in major cereal crops, such as rice, barley, and wheat, emphasizes that awns can be targeted for yield and quality improvement and may advance research aimed at identifying the phenotypic effects of morphological traits in grasses.


1989 ◽  
Vol 40 (6) ◽  
pp. 1117 ◽  
Author(s):  
KJ Quail ◽  
RA Fischer ◽  
JT Wood

F3 single plant traits were tested as possible selection criteria for increasing yield potential. F3 plants were grown spaced in a glasshouse, while yield was measured in southern New South Wales under irrigation and optimum management. Thc population studied comprised 220 F1-derived lines taken at random from a multiple convergent cross amongst 16 parents representing elite CTMMYT germplasm of the mid 1970s but containing diversity for major dwarfing genes, maturity, leaf angle and other traits. More than 50 traits were determined, comprising numerical components of yield, size and morphology, partitioning ratios, development rates and physiological activities. All F3 traits showed significant genotypic variation which was usually greater for progeny lines than for parents although only occasionally significantly so. Broad sense heritability was generally moderate to high.F3 lines were advanced by single seed descent for replicated F7 and F8 yield experiments, two in each of 1982 and 1983. In each experiment 60-68 progeny lines chosen at random were tested; 44 lines were common to all experiments. Plot size was 8 rows X 5 m, and edge rows and plot ends were discarded. Yield levels were high (mean yield 5.9 t h a 1 at 10Yo moisture) and largely free of interference from lodging and disease. The progeny main effect on grain yield was highly significant, but no progeny line significantly outyielded the best parent. Best correlations with progeny grain yield were given by F3 plant height (r= -0.31 to -0.50 across experiments), F3 kernel weight (r= -0.03 to -0.44), F3 harvest index (r = 0.18 to 0.5 l), F3 leaf angle (r = -0.13 to -0.40, erect leaves favouring high yicld) and F3 spike number (r=0.08 to 0.40). Retrospective selection in F3 using these traits singly at a selection intensity of 25% gave increases in population mean yield (0 to + 12%) and in the proportion of high yielding lines (doubled in some cases), but only selection in F3 for reduced stature is considered worthwhile for advancing yield potential. It is suggested that the ineffectiveness of F3 selection is largely due to genotype by environment interaction, along with the complex multigenic nature of grain yicld.


2015 ◽  
Vol 66 (4) ◽  
pp. 332 ◽  
Author(s):  
Lindsay W. Bell ◽  
Julianne M. Lilley ◽  
James R. Hunt ◽  
John A. Kirkegaard

Interest is growing in the potential to expand cropping into Australia’s high-rainfall zone (HRZ). Dual-purpose crops are suited to the longer growing seasons in these environments to provide both early grazing for livestock and later regrow to produce grain. Grain yield and grazing potential of wheats of four different maturity types were simulated over 50 years at 13 locations across Australia’s HRZ, and sowing date, nitrogen (N) availability and crop density effects were explored. Potential grazing days on wheat were obtained by simulating sheep grazing crops to Zadoks growth stage Z30 at 25 dry sheep equivalents (DSE)/ha. Optimal sowing dates for each maturity type at each location were matched to the flowering window during which risk of frost and heat stress was lowest. Overall, we found significant national potential for dual-purpose use of winter wheat cultivars across Australia’s HRZ, with opportunities identified in all regions. Simulated mean wheat yields exceeded 6 t/ha at most locations, with highest mean grain yields (8–10 t/ha) in southern Victoria, and lower yields (5–7 t/ha) in the south-west of Western Australia (WA) and central and northern New South Wales (NSW). Highest grazing days were from winter cultivars sown early (March–mid-April), which could provide 1700–3000 DSE-days/ha of grazing across HRZ locations; this was 2–3 times higher than could be obtained from grazing spring cultivars (200–800 DSE-days/ha). Sowing date was critical to maximise both grazing and grain yield potential from winter cultivars; each 1-week delay in sowing after 8 March reduced grazing by 200–250 DSE-days/ha and grain yield by 0.45 t/ha. However, in Mediterranean climates, a lower frequency of early sowing opportunities before mid-April (<30% of years) is likely to limit the potential to use winter cultivars. Prospects to graze shorter season spring cultivars that fit later sowing windows require further examination in south-west WA, the slopes of NSW and southern Queensland.


2020 ◽  
Vol 12 (4) ◽  
pp. 295-300
Author(s):  
N. Tsenov ◽  
T. Gubatov ◽  
I. Yanchev

Abstract. In a series of field trials, a database of quantitative traits associated with winter wheat grain yield has been collected. The aim of the present study is to determine the relationships between the winter wheat (Triticum aestivum L.) traits of productivity in environments causing the maximum possible variation of each of the traits. In order to determine the correlations between the quantitative characters studied, all possible statistical methods have been applied (regression analysis, PCA, Multiple Correspondence analysis), which complement each other. It was found that the nature of the correlations between traits depends to a large extent on the methods for their evaluation. There are high and significant correlations between grain yields and the grain number per spike (weight of grain per spike and number of grains per m2) even under strong genotype by environment interaction of all the traits in trails. The established results are related to possible options for increasing winter wheat grain yield by breeding.


2020 ◽  
Author(s):  
Achmad Amzeri ◽  
◽  
B.S. DARYONO ◽  
M. SYAFII ◽  
◽  
...  

The phenotypic analysis of new candidate varieties at multiple locations could provide information on the stability of their genotypes. We evaluated the stability of 11 maize hybrid candidates in five districts in East Java Province, Indonesia. Maize hybrids with high yield potential and early maturity traits derived from a diallel cross were planted in a randomized complete block design with two checks (Srikandi Kuning and BISI-2) as a single factor with four replicates. The observed traits were grain yield per hectare and harvest age. The effects of environment, genotype, and genotype × environment interaction on yield were highly significant (P < 0.01). KTM-1, KTM-2, KTM-4, KTM-5, and KTM-6 showed higher average grain yield per hectare than the checks (Srikandi Kuning = 8.49 ton ha−1 and BISI-2 = 7.32 ton ha−1) at five different locations. The average harvest age of 11 candidates was less than 100 days. KTM-4 and KTM-5 had production yields that were higher than the average yield of all genotypes in all environments (Yi > 7.78 tons ha−1) and were considered stable on the basis of three stability parameters, i.e., Finlay–Wilkinson, Eberhart–Russell, and additive main effect multiplicative interaction (AMMI). KTM-2 had the highest yield among all tested genotypes (9.33 ton ha−1) and was considered as stable on the basis of AMMI but not on the basis of Finlay–Wilkinson and Eberhart–Russell. KTM-1 performed well only in Pamekasan, whereas KTM-6 performed well only in Sampang. Thus, these two genotypes could be targeted for these specific locations.


2015 ◽  
Vol 60 (4) ◽  
pp. 395-406
Author(s):  
El Hassan ◽  
Yasir Gamar ◽  
Ibrahim Elzein ◽  
Asma Ali ◽  
Tareg Ahmed

Sorghum (Sorghum bicolor (L) Moench) is the most widely produced and consumed cereal crop in Sudan. However, productivity is low since the crop is produced in favorable and unfavorable environments where the crop suffers from drought stresses at different growth stages. In the present study, six sorghum inbred lines developed by local breeding program and two commercial checks were evaluated for grain yield potential, yield stability, some important agronomic characters and grain quality properties. Series variety trials were conducted at Elobeid and Suki, Damazin areas of Sudan, during three consecutive rainy seasons. The selected locations represent low, medium and high rainfall areas of Sudan. The trial was laid out in a randomized complete block design. The results revealed that mean squares of genotypes, seasons, locations, location x season, location x genotypes, season x genotypes and season x location x genotype interactions were highly significant (P=0.01) for grain yield. The sorghum genotypes Edo 34-23-4, Edo 26-18 and Edo 16-dwarf produced substantially higher grain yields than commercial checks and the trial mean. Their percentage yield increase ranged from 5% to 75% over commercial checks. The stability analysis revealed that the above mentioned Edo-genotypes had high yield potentials and were stable across a wide range of agricultural conditions. Moreover, the same Edo-lines showed early maturing compared to selected commercial checks and also the Edo-lines possessed good food grains and were market preferred and acceptable for making quality kisra (fermented sorghum pancake-like flatbread). The Edo developed lines also possess the acceptable grain quality in addition to moderate physical grain characteristics such as protein content, fat acidity and moisture content.


2016 ◽  
Vol 67 (1) ◽  
pp. 117 ◽  
Author(s):  
Lindsay W. Bell ◽  
Julianne M. Lilley ◽  
James R. Hunt ◽  
John A. Kirkegaard

Interest is growing in the potential to expand cropping into Australia's high-rainfall zone (HRZ). Dual-purpose crops are suited to the longer growing seasons in these environments to provide both early grazing for livestock and later regrow to produce grain. Grain yield and grazing potential of wheats of four different maturity types were simulated over 50 years at 13 locations across Australia's HRZ, and sowing date, nitrogen (N) availability and crop density effects were explored. Potential grazing days on wheat were obtained by simulating sheep grazing crops to Zadoks growth stage Z30 at 25 dry sheep equivalents (DSE)/ha. Optimal sowing dates for each maturity type at each location were matched to the flowering window during which risk of frost and heat stress was lowest. Overall, we found significant national potential for dual-purpose use of winter wheat cultivars across Australia's HRZ, with opportunities identified in all regions. Simulated mean wheat yields exceeded 6t/ha at most locations, with highest mean grain yields (8–10t/ha) in southern Victoria, and lower yields (5–7t/ha) in the south-west of Western Australia (WA) and central and northern New South Wales (NSW). Highest grazing days were from winter cultivars sown early (March–mid-April), which could provide 1700–3000 DSE-days/ha of grazing across HRZ locations; this was 2–3 times higher than could be obtained from grazing spring cultivars (200–800 DSE-days/ha). Sowing date was critical to maximise both grazing and grain yield potential from winter cultivars; each 1-week delay in sowing after 8 March reduced grazing by 200–250 DSE-days/ha and grain yield by 0.45t/ha. However, in Mediterranean climates, a lower frequency of early sowing opportunities before mid-April (


1999 ◽  
Vol 50 (7) ◽  
pp. 1263 ◽  
Author(s):  
J. Voltas ◽  
I. Romagosa ◽  
A. Lafarga ◽  
A. P. Armesto ◽  
A. Sombrero ◽  
...  

Carbon isotope discrimination (Δ) has been found to be either positively or negatively related to grain yield of small grain cereals when grown in contrasting environments. In order to clarify a possible association between grain yield of barley (Hordeum vulgare L.) and Δ of mature kernels, five 6-rowed and five 2-rowed barley cultivars were evaluated in 22 rainfed environments of northern Mediterranean Spain. Analyses of variance suggested that the genotypic Δ values were more consistent across environments than the genotypic yields. Genotype×environment (G×E) interaction for grain yield was further explored by fitting an AMMI (additive main effects and multiplicative interaction) model. The first 2 multiplicative axes were found significant. The AMMI2 model provided more accurate estimates of genotypic yields within environments than the conventional unadjusted means across replicates. AMMI2 estimates were used for input into cluster analysis, grouping environments that ranked genotypic yields similarly. Three major groups were obtained, with average yields of 2.42 t/ha (cluster I), 3.06 t/ha (cluster II), and 5.16 t/ha (cluster III). The genotypic ranking for Δ did not vary substantially across clusters, but it changed for grain yield. The average genotypic yields in the low-yielding cluster I ranked opposite to those in the high-yielding cluster III, suggesting the existence of a crossover point at an intermediate yield level. The association between grain yield and Δ for genotypic means within clusters was variable. In cluster I, yield and Δ tended to be negatively related, whereas they were positively related in clusters II and III. Genotypes with lower Δ, i.e. with higher transpiration efficiency, performed better in low-yielding environments (mostly those grouped in cluster I). On the contrary, a high genotypic Δ was of advantage in medium (cluster II) and high-yielding environments (cluster III). This observation supports the assumption that drought tolerance and high yield potential under non-limiting growing conditions may be antagonistic concepts in barley. Genotypic means for kernel number per m 2 and Δ were consistently and positively related within clusters, suggesting that a constitutively high Δ may have been driven by a large genotypic reproductive sink. The convenience of using Δ as a selection criterion in areas exhibiting a considerable G×E interaction for grain yield is discussed.


Sign in / Sign up

Export Citation Format

Share Document