scholarly journals Crystal structures and dynamical properties of dense CO2

2016 ◽  
Vol 113 (40) ◽  
pp. 11110-11115 ◽  
Author(s):  
Xue Yong ◽  
Hanyu Liu ◽  
Min Wu ◽  
Yansun Yao ◽  
John S. Tse ◽  
...  
Keyword(s):  
High Pressure ◽  
High Pressures ◽  
Theoretical Calculations ◽  
Ambient Pressure ◽  
Md Simulations ◽  
Ab Initio Molecular Dynamics ◽  
Structural Polymorphism ◽  
Stability Structure ◽  
Dynamical Properties ◽  
The Stability

Structural polymorphism in dense carbon dioxide (CO2) has attracted significant attention in high-pressure physics and chemistry for the past two decades. Here, we have performed high-pressure experiments and first-principles theoretical calculations to investigate the stability, structure, and dynamical properties of dense CO2. We found evidence that CO2-V with the 4-coordinated extended structure can be quenched to ambient pressure below 200 K—the melting temperature of CO2-I. CO2-V is a fully coordinated structure formed from a molecular solid at high pressure and recovered at ambient pressure. Apart from confirming the metastability of CO2-V (I-42d) at ambient pressure at low temperature, results of ab initio molecular dynamics and metadynamics (MD) simulations provided insights into the transformation processes and structural relationship from the molecular to the extended phases. In addition, the simulation also predicted a phase V′(Pna21) in the stability region of CO2-V with a diffraction pattern similar to that previously assigned to the CO2-V (P212121) structure. Both CO2-V and -V′ are predicted to be recoverable and hard with a Vicker hardness of ∼20 GPa. Significantly, MD simulations found that the CO2 in phase IV exhibits large-amplitude bending motions at finite temperatures and high pressures. This finding helps to explain the discrepancy between earlier predicted static structures and experiments. MD simulations clearly indicate temperature effects are critical to understanding the high-pressure behaviors of dense CO2 structures—highlighting the significance of chemical kinetics associated with the transformations.

Melting properties of Pt and its transport coefficients in liquid states under high pressures

2016 ◽  
Vol 30 (01) ◽  
pp. 1550250 ◽  
Author(s):  
Pan-Pan Wang ◽  
Ju-Xiang Shao ◽  
Qi-Long Cao
Keyword(s):  
Activation Energy ◽  
High Pressure ◽  
High Pressures ◽  
Ambient Pressure ◽  
Scaling Law ◽  
Transport Coefficients ◽  
Melting Curve ◽  
Md Simulations ◽  
Diffusion Activation Energy ◽  
Liquid States

Molecular dynamics (MD) simulations of the melting and transport properties in liquid states of platinum for the pressure range (50–200 GPa) are reported. The melting curve of platinum is consistent with previous ab initio MD simulation results and the first-principles melting curve. Calculated results for the pressure dependence of fusion entropy and fusion volume show that the fusion entropy and the fusion volume decrease with increasing pressure, and the ratio of the fusion volume to fusion entropy roughly reproduces the melting slope, which has a moderate decrease along the melting line. The Arrhenius law well describes the temperature dependence of self-diffusion coefficients and viscosity under high pressure, and the diffusion activation energy decreases with increasing pressure, while the viscosity activation energy increases with increasing pressure. In addition, the entropy-scaling law, proposed by Rosenfeld under ambient pressure, still holds well for liquid Pt under high pressure conditions.

scholarly journals Structural Properties of G,T-Parallel Duplexes

2010 ◽  
Vol 2010 ◽  
pp. 1-11 ◽  
Author(s):  
Anna Aviñó ◽  
Elena Cubero ◽  
Raimundo Gargallo ◽  
Carlos González ◽  
Modesto Orozco ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Structural Properties ◽  
Theoretical Calculations ◽  
Md Simulations ◽  
Theoretical Studies ◽  
Duplex Structure ◽  
Strong Stabilization ◽  
The Stability ◽  
The Impact

The structure of G,T-parallel-stranded duplexes of DNA carrying similar amounts of adenine and guanine residues is studied by means of molecular dynamics (MD) simulations and UV- and CD spectroscopies. In addition the impact of the substitution of adenine by 8-aminoadenine and guanine by 8-aminoguanine is analyzed. The presence of 8-aminoadenine and 8-aminoguanine stabilizes the parallel duplex structure. Binding of these oligonucleotides to their target polypyrimidine sequences to form the corresponding G,T-parallel triplex was not observed. Instead, when unmodified parallel-stranded duplexes were mixed with their polypyrimidine target, an interstrand Watson-Crick duplex was formed. As predicted by theoretical calculations parallel-stranded duplexes carrying 8-aminopurines did not bind to their target. The preference for the parallel-duplex over the Watson-Crick antiparallel duplex is attributed to the strong stabilization of the parallel duplex produced by the 8-aminopurines. Theoretical studies show that the isomorphism of the triads is crucial for the stability of the parallel triplex.

scholarly journals Pressure-Dependent Clustering in Ionic-Liquid-Poly (Vinylidene Fluoride) Mixtures: An Infrared Spectroscopic Study

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2099
Author(s):  
Teng-Hui Wang ◽  
Wei-Xiang Wang ◽  
Hai-Chou Chang
Keyword(s):  
High Pressure ◽  
High Pressures ◽  
Vinylidene Fluoride ◽  
Ambient Pressure ◽  
Infrared Spectroscopic Study ◽  
Research Attention ◽  
Nanoscale Structures ◽  
Local Structures ◽  
Poly Vinylidene Fluoride ◽  
Hydrogen Bonded

The nanostructures of ionic liquids (ILs) have been the focus of considerable research attention in recent years. Nevertheless, the nanoscale structures of ILs in the presence of polymers have not been described in detail at present. In this study, nanostructures of ILs disturbed by poly(vinylidene fluoride) (PVdF) were investigated via high-pressure infrared spectra. For 1-(2-hydroxyethyl)-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([HEMIm][TFSI])-PVdF mixtures, non-monotonic frequency shifts of the C4,5-H vibrations upon dilution were observed under ambient pressure. The experimental results suggest the presence of microheterogeneity in the [HEMIm][TFSI] systems. Upon compression, PVdF further influenced the local structure of C4,5–H via pressure-enhanced IL–PVdF interactions; however, the local structures of C2–H and hydrogen-bonded O–H were not affected by PVdF under high pressures. For choline [TFSI]–PVdF mixtures, PVdF may disturb the local structures of hydrogen-bonded O–H. In the absence of the C4,5–H⋯anion and C2–H⋯anion in choline [TFSI]–PVdF mixtures, the O–H group becomes a favorable moiety for pressure-enhanced IL–PVdF interactions. Our results indicate the potential of high-pressure application for designing pressure-dependent electronic switches based on the possible changes in the microheterogeneity and electrical conductivity in IL-PVdF systems under various pressures.

PRESSURE-INDUCED ELECTRONIC PHASE TRANSITIONS AND SUPERCONDUCTIVITY IN TITANIUM

2009 ◽  
Vol 23 (05) ◽  
pp. 723-741 ◽  
Author(s):  
K. IYAKUTTI ◽  
C. NIRMALA LOUIS ◽  
S. ANURATHA ◽  
S. MAHALAKSHMI
Keyword(s):  
High Pressure ◽  
Band Structure ◽  
Fermi Surface ◽  
High Pressures ◽  
Ambient Pressure ◽  
Structural Phase ◽  
Normal Pressure ◽  
Orbital Method ◽  
Superconducting Transition ◽  
Electronic Band

The electronic band structure, density of states, structural phase transition, superconducting transition and Fermi surface cross section of titanium ( Ti ) under normal and high pressures are reported. The high pressure band structure exhibits significant deviations from the normal pressure band structure due to s → d transition. On the basis of band structure and total energy results obtained using tight-binding linear muffin-tin orbital method (TB LMTO), we predict a phase transformation sequence of α( hcp ) → ω (hexagonal) → γ (distorted hcp) → β (bcc) in titanium under pressure. From our analysis, we predict a δ (distorted bcc) phase which is not stable at any high pressures. At ambient pressure, the superconducting transition occurs at 0.354 K. When the pressure is increased, it is predicted that, Tc increases at a rate of 3.123 K/Mbar in hcp–Ti . On further increase of pressure, Tc begins to decrease at a rate of 1.464 K/Mbar. The highest value of Tc(P) estimated is 5.043 K for hcp–Ti , 4.538 K for ω– Ti and 4.85 K for bcc – Ti . From this, it is inferred that the maximum value of Tc(P) is rather insensitive to the crystal structure of Ti . The nonlinearities in Tc(P) is explained by considering the destruction and creation of new parts of Fermi surface at high pressure. At normal pressure, the hardness of Ti is in the following order: ω- Ti > hcp - Ti > bcc- Ti > γ- Ti .

LEAD-CHALCOGENIDES UNDER PRESSURE: AB-INITIO STUDY

2013 ◽  
Vol 22 ◽  
pp. 612-618 ◽  
Author(s):  
DINESH C. GUPTA ◽  
IDRIS HAMID
Keyword(s):  
Phase Transition ◽  
High Pressure ◽  
Ab Initio ◽  
Band Gap ◽  
Rock Salt ◽  
High Pressures ◽  
Ambient Pressure ◽  
High Pressure Phase ◽  
Lead Chalcogenides ◽  
Pressure Phase

ab-initio calculations using fully relativistic pseudo-potential have been performed to investigate the high pressure phase transition, elastic and electronic properties of lead-chalcogenides including the less known lead polonium. The calculated ground state parameters, for the rock-salt structure show good agreement with the experimental data. The enthalpy calculations show that these materials undergo a first-order phase transition from rock-salt to CsCl structure at 19.4, 15.5, 11.5 and 7.3 GPa for PbS, PbSe, PbTe and PbPo, respectively. Present calculations successfully predicted the location of the band gap at L-point of Brillouin zone as well as the value of the band gap in every case at ambient pressure. It is observed that unlike other lead-chalcogenides, PbPo is semi-metal at ambient pressure. The pressure variation of the energy gap indicates that these materials metalized under high pressures. For this purpose, the electronic structure of these materials has also been computed in parent as well as in high pressure phase.

High-pressure transformations of NbO2F

2000 ◽  
Vol 56 (2) ◽  
pp. 189-196 ◽  
Author(s):  
Stefan Carlson ◽  
Ann-Kristin Larsson ◽  
Franziska E. Rohrer
Keyword(s):  
Phase Transition ◽  
High Pressure ◽  
High Pressures ◽  
Ambient Pressure ◽  
Close Packing ◽  
Hexagonal Close Packing ◽  
Rietveld Refinements ◽  
X Ray ◽  
Anion Coordination ◽  
Diamond Anvil

The ReO3-type structure NbO2F, niobium dioxyfluoride, has been studied at high pressures using diamond anvil cells and synchrotron X-ray radiation. High-pressure powder diffraction measurements have been performed up to 40.1 GPa. A phase transition from the cubic (Pm3¯m) ambient pressure structure to a rhombohedral (R3¯c) structure at 0.47 GPa has been observed. Rietveld refinements at 1.38, 1.96, 3.20, 6.23, 9.00 and 10.5 GPa showed that the transition involves an a − a − a − tilting of the cation–anion coordination octahedra and a change of the anion–anion arrangement to approach hexagonal close packing. Compression and distortion of the Nb(O/F)6 octahedra is also revealed by the Rietveld refinements. At 17–18 GPa, the diffraction pattern disappears and the structure becomes X-ray amorphous.

scholarly journals Towards a generalized vision of oxides: disclosing the role of cations and anions in determining unit-cell dimensions

2010 ◽  
Vol 66 (3) ◽  
pp. 338-344 ◽  
Author(s):  
Ángel Vegas ◽  
Maurizio Mattesini
Keyword(s):  
High Pressure ◽  
High Pressures ◽  
Theoretical Calculations ◽  
Structure Type ◽  
Electron Localization Function ◽  
Electron Localization ◽  
Localization Function ◽  
Cscl Type ◽  
Charge Concentration ◽  
Unit Cell Dimensions

Theoretical calculations of the electron-localization function show that, at the volumes of the two CaO phases (rocksalt and CsCl type), the parent Ca structures (fcc: face-centred cubic and sc: simple cubic, respectively) exhibit charge concentration zones which coincide with the positions occupied by the O atoms in their oxides. Similar features, also observed for the pairs Ca/CaF2 and BaSn/BaSnO3, are supported by recent high-pressure experiments as well as electron-localization function (ELF) calculations, carried out on elemental K. At very high pressures, the elemental K adopts the hP4 structure, topologically identical to that of the K atoms in high-pressure K2S and high-temperature α-K2SO4. Moreover, the ELF for the hP4 structure shows charge concentration (∼ 2 electrons) at the sites occupied by the S atoms in the high-pressure K2S phase. All these features confirm the oxidation/high-pressure equivalence as well as the prediction of how cation arrays should be metastable phases of the parent metals. For the first time to our knowledge, the structure type, dimension and topology of several oxides and fluorides (CaO, CaF2 and BaSnO3) are explained in univocal physical terms.

Phase transitions of BaCO3 at high pressures

2008 ◽  
Vol 72 (2) ◽  
pp. 659-665 ◽  
Author(s):  
S. Ono ◽  
J. P. Brodholt ◽  
G. D. Price
Keyword(s):  
Phase Transition ◽  
Experimental Study ◽  
High Pressure ◽  
Phase Transitions ◽  
Bulk Modulus ◽  
First Principles ◽  
High Pressures ◽  
Ambient Conditions ◽  
The Stability ◽  
Previous Experimental Study

AbstractFirst-principles simulations and high-pressure experiments were used to study the stability of BaCO3 carbonates at high pressures. Witherite, which is orthorhombic and isotypic with CaCO3 aragonite, is stable at ambient conditions. As pressure increases, BaCO3 transforms from witherite to an orthorhombic post-aragonite structure at 8 GPa. The calculated bulk modulus of the post-aragonite structure is 60.7 GPa, which is slightly less than that from experiments. This structure shows an axial anisotropicc ompressibility and the a axis intersects with the c axis at 70 GPa, which implies that the pressure-induced phase transition reported in previous experimental study is misidentified. Although a pyroxene-like structure is stable in Mg- and Ca-carbonates at pressures >100 GPa, our simulations showed that this structure does not appear in BaCO3.

High Pressure Properties of Superconducting Material Palladium

2013 ◽  
Vol 813 ◽  
pp. 327-331
Author(s):  
Wei Min Peng ◽  
Zhong Li Liu ◽  
Hong Zhi Fu
Keyword(s):  
High Pressure ◽  
Perturbation Theory ◽  
Transition Temperature ◽  
Superconducting Transition Temperature ◽  
Density Functional ◽  
High Pressures ◽  
Ambient Pressure ◽  
Superconducting Transition ◽  
Superconducting Properties ◽  
Density Functional Perturbation Theory

The electronic and the superconducting properties of Pd were studied in the framework of density functional perturbation theory. We explored the superconducting transition temperature for bulk Pd and predicted possible superconductivity at ambient and high pressures. It is found that of Pd is 0.0356 K at ambient pressure and it decreases with pressure.

scholarly journals Pressure-induced phase transitions in Na2B12H12, structural investigation on a candidate for solid-state electrolyte

2019 ◽  
Vol 75 (3) ◽  
pp. 406-413 ◽  
Author(s):  
Romain Moury ◽  
Zbigniew Łodziana ◽  
Arndt Remhof ◽  
Léo Duchêne ◽  
Elsa Roedern ◽  
...  
Keyword(s):  
High Pressure ◽  
Solid State ◽  
Bulk Modulus ◽  
Density Functional ◽  
Ambient Pressure ◽  
Density Functional Theory Calculations ◽  
Ionic Conductors ◽  
Theoretical Predictions ◽  
Primary Order ◽  
The Stability

closo-Borates, such as Na2B12H12, are an emerging class of ionic conductors that show promising chemical, electrochemical and mechanical properties as electrolytes in all-solid-state batteries. Motivated by theoretical predictions, high-pressure in situ powder X-ray diffraction on Na2B12H12 was performed and two high-pressure phases are discovered. The first phase transition occurs at 0.5 GPa and it is persistent to ambient pressure, whereas the second transition takes place between 5.7 and 8.1 GPa and it is fully reversible. The mechanisms of the transitions by means of group theoretical analysis are unveiled. The primary-order parameters are identified and the stability at ambient pressure of the first polymorph is explained by density functional theory calculations. Finally, the parameters relevant to engineer and build an all-solid-state battery, namely, the bulk modulus and the coefficient of the thermal expansion are reported. The relatively low value of the bulk modulus for the first polymorph (14 GPa) indicates a soft material which allows accommodation of the volume change of the cathode during cycling.

Sign in / Sign up

Export Citation Format

Share Document