Theory of ion reflection from amorphous surface at low glancing angles

1989 ◽  
Vol 107 (2-4) ◽  
pp. 197-225 ◽  
Author(s):  
M. A. Kumakhov ◽  
A. S. Sabirov
Keyword(s):  
Author(s):  
T. E. Mitchell ◽  
R. B. Schwarz

Traditional oxide glasses occur naturally as obsidian and can be made easily by suitable cooling histories. In the past 30 years, a variety of techniques have been discovered which amorphize normally crystalline materials such as metals. These include [1-3]:Rapid quenching from the vapor phase.Rapid quenching from the liquid phase.Electrodeposition of certain alloys, e.g. Fe-P.Oxidation of crystals to produce amorphous surface oxide layers.Interdiffusion of two pure crystalline metals.Hydrogen-induced vitrification of an intermetal1ic.Mechanical alloying and ball-milling of intermetal lie compounds.Irradiation processes of all kinds using ions, electrons, neutrons, and fission products.We offer here some general comments on the use of TEM to study these materials and give some particular examples of such studies.Thin specimens can be prepared from bulk homogeneous materials in the usual way. Most often, however, amorphous materials are in the form of surface films or interfacial films with different chemistry from the substrates.


Author(s):  
R. Vincent

Microanalysis and diffraction on a sub-nanometre scale have become practical in modern TEMs due to the high brightness of field emission sources combined with the short mean free paths associated with both elastic and inelastic scattering of incident electrons by the specimen. However, development of electron diffraction as a quantitative discipline has been limited by the absence of any generalised theory for dynamical inelastic scattering. These problems have been simplified by recent innovations, principally the introduction of spectrometers such as the Gatan imaging filter (GIF) and the Zeiss omega filter, which remove the inelastic electrons, combined with annual improvements in the speed of computer workstations and the availability of solid-state detectors with high resolution, sensitivity and dynamic range.Comparison of experimental data with dynamical calculations imposes stringent requirements on the specimen and the electron optics, even when the inelastic component has been removed. For example, no experimental CBED pattern ever has perfect symmetry, departures from the ideal being attributable to residual strain, thickness averaging, inclined surfaces, incomplete cells and amorphous surface layers.


1996 ◽  
Vol 444 ◽  
Author(s):  
S. M. Myers ◽  
D. M. Follstaedt ◽  
J. A. Knapp ◽  
T. R. Christenson

AbstractDual ion implantation of titanium and carbon was shown to produce an amorphous surface layer in annealed bulk nickel, in electroformed Ni, and in electroformed Ni7 5Fe 2 5. Diamond-tip nanoindentation coupled with finite-element modeling quantified the elastic and plastic mechanical properties of the implanted region. The amorphized matrix, with a thickness of about 100 nm, has a yield stress of approximately 6 GP and an intrinsic hardness near 16 GPa, exceeding by an order of magnitude the corresponding values for annealed bulk Ni. Implications for micro-electromechanical systems are discussed.


1994 ◽  
Vol 339 ◽  
Author(s):  
V. Heera ◽  
R. Kögler ◽  
W. Skorupa ◽  
J. Stoemenos

ABSTRACTThe evolution of the damage in the near surface region of single crystalline 6H-SiC generated by 200 keV Ge+ ion implantation at room temperature (RT) was investigated by Rutherford backscattering spectroscopy/chanelling (RBS/C). The threshold dose for amorphization was found to be about 3 · 1014 cm-2, Amorphous surface layers produced with Ge+ ion doses above the threshold were partly annealed by 300 keV Si+ ion beam induced epitaxial crystallization (IBIEC) at a relatively low temperature of 480°C For comparison, temperatures of at least 1450°C are necessary to recrystallize amorphous SiC layers without assisting ion irradiation. The structure and quality of both the amorphous and recrystallized layers were characterized by cross-section transmission electron microscopy (XTEM). Density changes of SiC due to amorphization were measured by step height measurements.


1980 ◽  
Vol 30 (2) ◽  
pp. 588-600
Author(s):  
S C Holt ◽  
A C Tanner ◽  
S S Socransky

Selected human oral and nonoral strains of the genera Actinobacillus and Haemophilus were examined by transmission and scanning electron microscopy. The strains examined were morphologically identical to recognized Actinobacillus actinomycetemcomitans, Haemophilus aphrophilus, and Haemophilus paraphrophilus. By transmission electron microscopy, the cells were typically gram negative in morphology, with several strains possessing some extracellular ruthenium red-staining polymeric material. Numerous vesicular structures, morphologically identical to lipopolysaccharide vesicles, were seen to originate from and be continuous with the surface of the outer membrane. Large numbers of these vesicles were also found in the external environment. Scanning electron microscopic observations revealed that both actinobacilli and haemophili possessed surface projections and an amorphous surface material which connected and covered adjacent cells.


2018 ◽  
Vol 156 ◽  
pp. 03001 ◽  
Author(s):  
Meiti Pratiwi ◽  
Godlief F. Neonufa ◽  
Tirto Prakoso ◽  
Tatang H. Soerawidjaja

In previous study, by heating magnesium basic soaps from palm stearine will decarboxylated and produced biohydrocarbon. The frequent method to produced metal soaps from triglyceride in laboratory scale is metathesis. This process is less favored because this method would produced large amounts of salt waste and hard to develop into bigger scale. This study investigated the process and characterization of magnesium soaps from coconut oil and magnesium hydroxide via direct reaction method at 185 °C for 3 and 6 hours. The resulting soaps were washed with water and methanol, then dried. This process yield more than 80%-w metal soaps, acid values lower than 6 mg KOH/g and pH 9.2. Based on Thermogravimetry Analysis (TGA) and SEM results, the initial decomposition temperature of these metal soaps were at 300 °C and have amorphous surface morphology. From decarboxylation test of magnesium basic soaps indicate great potency as feed for biohydrocarbon production.


1981 ◽  
Vol 103 (2-3) ◽  
pp. 353-360 ◽  
Author(s):  
M.R. Mruzik ◽  
S.H. Garofalini ◽  
G.M. Pound

2005 ◽  
Vol 20 (4) ◽  
pp. 1009-1016 ◽  
Author(s):  
S. Sprio ◽  
G. Pezzotti ◽  
G. Celotti ◽  
E. Landi ◽  
A. Tampieri

Stoichiometric and magnesium-substituted synthetic hydroxyapatite (HA) powders with different Mg contents were characterized by Raman and cathodoluminescence (CL) spectroscopies. The substitution of Ca ions by Mg is presently of great interest because it may improve activity in the first stage of the bone remodeling process. In this paper, we show new evidence that CL spectroscopy has the capability to detect the presence of crystal defects, related to the presence of magnesium substituting calcium in Mg-doped HA powders. The dependence of CL spectra of stoichiometric and magnesium-doped HA powders on their chemical composition was studied, and the results are compared with Raman analysis and data previously collected by other analytical tools. All the investigated powders showed five distinct CL bands; moreover, in magnesium-doped HA, an additional band at higher energy was found. The intensity ratios between selected CL bands showed some relationships with the powder crystallinity and the estimated amount of magnesium both in the HA lattice and in the amorphous surface layer; moreover the band observed only in magnesium-substituted powders could be directly related to the amount of magnesium entered into the HA lattice. Such results can contribute to improve the knowledge of the crystallographic structure of Mg-substituted hydroxyapatite.


Sign in / Sign up

Export Citation Format

Share Document