Influence of operating conditions on the retention of severe industrial wastewater by nanofiltration

Author(s):  
Boutheyna Aoufi ◽  
Mohamed A. Didi ◽  
Abdelkrim Azzouz
2005 ◽  
Vol 2005 (14) ◽  
pp. 2232-2247
Author(s):  
Michael S. Demko ◽  
Frank Coughenour ◽  
John J. Pacifici ◽  
Sam Jeyanayagam ◽  
David T. Redmon

2007 ◽  
Vol 55 (8-9) ◽  
pp. 51-58 ◽  
Author(s):  
M.A. Martín Martín ◽  
L. López Enríquez ◽  
M. Fernández-Polanco ◽  
S. Villaverde ◽  
P.A. García-Encina

Two hybrid fluidised bed reactors filled with sepiolite and granular activated carbon (GAC) were operated with short cycled aeration for removing organic matter, total nitrogen and phosphorous, respectively. Both reactors were continuously operated with synthetic and/or industrial wastewater containing 350–500 mg COD/L, 110–130 mg NKT/L, 90–100 mg NH3-N/L and 12–15 mg P/L for 8 months. The reactor filled with sepiolite, treating only synthetic wastewater, removed COD, ammonia, total nitrogen and phosphorous up to 88, 91, 55 and 80% with a hydraulic retention time (HRT) of 10 h, respectively. These efficiencies correspond to removal rates of 0.95 kgCODm−3d−1 and 0.16 kg total N m−3d−1.The reactor filled with GAC was operated for 4 months with synthetic wastewater and 4 months with industrial wastewater, removing 98% of COD, 96% of ammonia, and 66% of total nitrogen, with an HRT of 13.6 h. No significant phosphorous removing activity was observed in this reactor. Microbial communities growing with both reactors were followed using polymerase chain reaction (PCR) and denaturing gradient gel electrophoresis (DGGE) techniques. The microbial fingerprints, i.e. DGGE profiles, indicated that biological communities in both reactors were stable along the operational period even when the operating conditions were changed.


2009 ◽  
Vol 4 (1) ◽  
Author(s):  
S. Morling

This paper presents performance experiences from the operation of a large SBR facility in Nowy Targ, Poland. The plant has been in operation since 1995, and a number of investigations have contributed to the evaluation of the operating conditions at the Nowy Targ plant. The plant was designed for treating municipal and industrial wastewater from about 150,000 person equivalents. The plant receives chromium rich wastewater from almost 400 small and medium-sized tanneries in the area. Although the Cr concentration sometimes exceeds 20 ppm in the combined incoming wastewater, the nutrient removal as well as organic removal has proven to be very good. The possible effect of Cr acting as a precipitant for phosphorus is also addressed. The influence of water temperature on the nitrogen performance is clearly demonstrated by the results. The prevailing low water temperature has affected but not inhibited the nitrogen removal. The phosphorus removal as found in this investigation suggests an advanced biological removal; however the impact of a possible precipitation by Cr is addressed.


2014 ◽  
Vol 70 (2) ◽  
pp. 279-288 ◽  
Author(s):  
Asun Larrea ◽  
Andre Rambor ◽  
Malcolm Fabiyi

The use of membrane bioreactors (MBRs) in activated sludge wastewater treatment has grown significantly in the last decade. While there is growing awareness and knowledge about the application of MBR technology in municipal wastewater treatment, not much information is available on the application of MBRs in industrial wastewater treatment. A comparative study of design data, operating conditions and the major challenges associated with MBR operations in 24 MBR plants treating both municipal and industrial wastewater, built by and/or operated by Praxair, Inc., is presented. Of the 24 MBR systems described, 12 of the plants used high purity oxygen (HPO). By enabling a wide range of food/microorganism ratios and loading conditions in the same system, HPO MBR systems can extend the options available to industrial plant operators to meet the challenges of wide fluctuations in organic loading and footprint limitations. While fouling in industrial MBR systems can be an issue, adequate flux and permeability values can be reliably maintained by the use of good maintenance strategies and effective process controls (pretreatment, cleaning and membrane autopsies).


2012 ◽  
Vol 573-574 ◽  
pp. 521-525
Author(s):  
Nan Zhang ◽  
Pu Liu ◽  
Ben Quan Fu ◽  
Li Na Wang

In this paper, nanometer titanium dioxide was synthesized by a simple reaction. The prepared adsorbent was characterized by surface area and porosimetry analyzer and it was used for the removal of heave metals in industrial wastewater. The main parameters affecting the adsorption of heavy metals including pH, adsorption condition and elution condition have been investigated in detail. Under the optimized operating conditions, most of the target heavy metals could be fast removed. The adsorbent could be simply regenerated by hydrochloric acid. Thus, the prepared nanometer titanium dioxide was an adsorbent which is suitable for the removal of heavy metals in industrial wastewater.


2012 ◽  
Vol 198-199 ◽  
pp. 927-931
Author(s):  
Yan Zhen Yu ◽  
Juan Tan ◽  
Yong Sun ◽  
Yu Xing Zhou ◽  
Lei Cheng

Using self-made high-ferric-based silicon coagulant to deal with the lead containing industrial wastewater. Firstly we can define the optimum dosage of coagulant by jar test, and then utilize orthogonal experiment to seek the best energy consumption allocation decision at different levels. Combining with the fractal dimension of flocs, it can directly reflect the flocs growth of each stage in the distribution of energy consumption, and can guide the operating conditions of coagulation technology. This method not only makes water treatment economical and efficient, but also offers the comparatively scientific design data for the design of the flocculation tank in water works.


2019 ◽  
Vol 73 (1) ◽  
pp. 47-62
Author(s):  
Ana Popovic ◽  
Sonja Milicevic ◽  
Vladan Milosevic ◽  
Branislav Ivosevic ◽  
Jelena Carapic ◽  
...  

Industrial wastewater contains recalcitrant organic compounds with a very complex chemical structure, built of molecules with long chains of carbon atoms and attached different functional groups. Chemical or biological treatments used for removal of these compounds are being replaced with more efficient non-commercial wastewater treatments. Advanced oxidation processes overcome limitations of conventional methods regarding formation of by-products during degradation of recalcitrant organic compounds. The Fenton process, or use of the Fenton?s reagent, has became one of the most utilized processes due to simplicity, economy and accessible amounts of ferrous iron and hydrogen-peroxide, which are used in the process. In specific, the Fenton?s reagent is a catalytic-oxidative mixture of these two components. The ferrous iron Fe2+ initiates and catalyzes decomposition of H2O2, resulting in generation of hydroxyl radicals, which are the main radical species in the process able to detoxify several organic pollutants by oxidation. In addition, other mechanisms besides formation of hydroxyl radicals may occur during the Fenton process and participate in degradation of target pollutants. Generally, the treatment efficiency relies upon the physical and chemical properties of target pollutants and the process operating conditions. The main disadvantage of the Fenton process is production of sludge formed by iron hydroxide at certain pH values. An alternative solution for this problem is application of this process in fluidized bed reactors. This paper presents an overview of Fenton and photo-Fenton processes in dispersed systems for removal of different industrial wastewater pollutants. The most important process parameters, required for efficient degradation of recalcitrant organic compounds are also described, such as the catalyst type, pH value, temperature, H2O2 concentration and retention time. Strict control of Fenton process parameters in fluidized bed reactors at desired values can bring these systems to the commercial use.


1994 ◽  
Vol 30 (3) ◽  
pp. 11-19 ◽  
Author(s):  
Chang-Won Kim ◽  
Byung-Goon Kim ◽  
Tae-Ho Lee ◽  
Tae-Joo Park

An on-line toxic detection system is introduced for early and continuous observation of toxicity in an industrial wastewater treatment plant. The system consists of a contact chamber and an on-line respiration meter. If a raw wastewater sample is taken at the head of the wastewater treatment plant, one can detect toxicity of the wastewater before it reaches the aeration tank. For proper usage of this system a maximum respiration rate should be measured in the contact chamber. To apply this system on the petrochemical wastewater the Qe/Qs, ratio should be maintained higher than 0.6 among other operating conditions required When this system was tested under high and low pH, Co2+ inhibition, and recovered catalyst wastes addition, the system responded very sensitively.


Sign in / Sign up

Export Citation Format

Share Document