High-performance broadband photoresponse of self-powered Mg2Si/Si photodetectors

2021 ◽  
Author(s):  
Qinghai Zhu ◽  
Peng Ye ◽  
Youmei Tang ◽  
Xiaodong Zhu ◽  
Zhiyuan Cheng ◽  
...  

Abstract Infrared optoelectronic devices are capable of operating in harsh environments with outstanding confidentiality and reliability. Nevertheless, suffering from the large band gap value, most semiconductor materials are difficult to detect infrared light signals. Here, Mg2Si/Si heterojunction photodetectors (PDs), which possess the advantages of low-cost, easy process, environmental friendliness, and compatibility with silicon CMOS technology, have been reported with a broadband spectral response as tested from 532 to 1550 nm under zero-bias. When the incident light wavelength is 808 nm, the Mg2Si/Si photodetector (PD) has a responsivity of 1.04 A/W and a specific detectivity of 1.51 × 1012 Jones. Furthermore, we find that the Ag nanoparticles (Ag_NPs) assembled on the Mg2Si layer can greatly improve the performance of the Mg2Si/Si PD. The responsivity and specific detectivity of Mg2Si/Si device with Ag_NPs under 808 nm illumination are 2.55 A/W and 2.60 × 1012 Jones, respectively. These excellent photodetection performances can be attributed to the high-quality of our grown Mg2Si material and the strong built-in electric field effect in the heterojunction, which can be further enhanced by the local surface plasmon effect and local electromagnetic field induced by Ag_NPs. Our study would provide significant guidance for the development of new self-powered infrared PDs based on silicon materials.

Crystals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 267
Author(s):  
Minyu Bai ◽  
Zhuoman Wang ◽  
Jijie Zhao ◽  
Shuai Wen ◽  
Peiru Zhang ◽  
...  

Weak absorption remains a vital factor that limits the application of two-dimensional (2D) materials due to the atomic thickness of those materials. In this work, a direct chemical vapor deposition (CVD) process was applied to achieve 2D MoS2 encapsulation onto the silicon nanopillar array substrate (NPAS). Single-layer 2D MoS2 monocrystal sheets were obtained, and the percentage of the encapsulated surface of NPAS was up to 80%. The reflection and transmittance of incident light of our 2D MoS2-encapsulated silicon substrate within visible to shortwave infrared were significantly reduced compared with the counterpart planar silicon substrate, leading to effective light trapping in NPAS. The proposed method provides a method of conformal deposition upon NPAS that combines the advantages of both 2D MoS2 and its substrate. Furthermore, the method is feasible and low-cost, providing a promising process for high-performance optoelectronic device development.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Amir Muhammad Afzal ◽  
In-Gon Bae ◽  
Yushika Aggarwal ◽  
Jaewoo Park ◽  
Hye-Ryeon Jeong ◽  
...  

AbstractHybrid organic–inorganic perovskite materials provide noteworthy compact systems that could offer ground-breaking architectures for dynamic operations and advanced engineering in high-performance energy-harvesting optoelectronic devices. Here, we demonstrate a highly effective self-powered perovskite-based photodiode with an electron-blocking hole-transport layer (NiOx). A high value of responsivity (R = 360 mA W−1) with good detectivity (D = 2.1 × 1011 Jones) and external quantum efficiency (EQE = 76.5%) is achieved due to the excellent interface quality and suppression of the dark current at zero bias voltage owing to the NiOx layer, providing outcomes one order of magnitude higher than values currently in the literature. Meanwhile, the value of R is progressively increased to 428 mA W−1 with D = 3.6 × 1011 Jones and EQE = 77% at a bias voltage of − 1.0 V. With a diode model, we also attained a high value of the built-in potential with the NiOx layer, which is a direct signature of the improvement of the charge-selecting characteristics of the NiOx layer. We also observed fast rise and decay times of approximately 0.9 and 1.8 ms, respectively, at zero bias voltage. Hence, these astonishing results based on the perovskite active layer together with the charge-selective NiOx layer provide a platform on which to realise high-performance self-powered photodiode as well as energy-harvesting devices in the field of optoelectronics.


2022 ◽  
Vol 6 (1) ◽  
Author(s):  
Taikyu Kim ◽  
Cheol Hee Choi ◽  
Pilgyu Byeon ◽  
Miso Lee ◽  
Aeran Song ◽  
...  

AbstractAchieving high-performance p-type semiconductors has been considered one of the most challenging tasks for three-dimensional vertically integrated nanoelectronics. Although many candidates have been presented to date, the facile and scalable realization of high-mobility p-channel field-effect transistors (FETs) is still elusive. Here, we report a high-performance p-channel tellurium (Te) FET fabricated through physical vapor deposition at room temperature. A growth route involving Te deposition by sputtering, oxidation and subsequent reduction to an elemental Te film through alumina encapsulation allows the resulting p-channel FET to exhibit a high field-effect mobility of 30.9 cm2 V−1 s−1 and an ION/OFF ratio of 5.8 × 105 with 4-inch wafer-scale integrity on a SiO2/Si substrate. Complementary metal-oxide semiconductor (CMOS) inverters using In-Ga-Zn-O and 4-nm-thick Te channels show a remarkably high gain of ~75.2 and great noise margins at small supply voltage of 3 V. We believe that this low-cost and high-performance Te layer can pave the way for future CMOS technology enabling monolithic three-dimensional integration.


SPIN ◽  
2019 ◽  
Vol 10 (01) ◽  
pp. 2050003 ◽  
Author(s):  
Iman Alibeigi ◽  
Abdolah Amirany ◽  
Ramin Rajaei ◽  
Mahmoud Tabandeh ◽  
Saeed Bagheri Shouraki

Generation of random numbers is one of the most important steps in cryptographic algorithms. High endurance, high performance and low energy consumption are the attractive features offered by the Magnetic Tunnel Junction (MTJ) devices. Therefore, they have been considered as one of the promising candidates for next-generation digital integrated circuits. In this paper, a new circuit design for true random number generation using MTJs is proposed. Our proposed circuit offers a high speed, low power and a truly random number generation. In our design, we employed two MTJs that are configured in special states. Generated random bit at the output of the proposed circuit is returned to the write circuit to be written in the relevant cell for the next random generation. In a random bitstream, all bits must have the same chance of being “0”or “1”. We have proposed a new XOR-based method in this paper to resolve this issue in multiple random generators that produce truly random numbers with a different number of ones and zeros in the output stream. The simulation results using a 45[Formula: see text]nm CMOS technology with a special model of MTJ validated the advantages offered by the proposed circuit.


2014 ◽  
Vol 530-531 ◽  
pp. 217-220
Author(s):  
Hwang Cherng Chow ◽  
Bing Shiun Tang

In this paper, a high performance current-mode instrumentation amplifier has been proposed with low noise, low power and high CMRR features. The proposed design can adjust the gain with an external resistor for the processing of various biomedical signals. To reduce the noise of the amplifier, two design methods including PMOS input and lateral pnp BJT input have been implemented to improve the prior arts. To meet the single power supply need, a biomedical voltage level shifter is also proposed for low cost CMOS implementation. Based on the post-layout simulation results, the presented current-mode amplifier achieves high CMRR over 120 dB, power consumption of 61 uW at 1.8-V supply using standard 0.18-um CMOS technology.


2018 ◽  
Vol 6 (2) ◽  
pp. 299-303 ◽  
Author(s):  
Ranran Zhuo ◽  
Yuange Wang ◽  
Di Wu ◽  
Zhenhua Lou ◽  
Zhifeng Shi ◽  
...  

Self-powered MoS2/GaN p–n heterojunction photodetectors exhibited high sensitivity to deep-UV light with high responsivity, specific detectivity and fast response speeds.


2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Jingxuan Wei ◽  
Ying Li ◽  
Lin Wang ◽  
Wugang Liao ◽  
Bowei Dong ◽  
...  

AbstractBulk photovoltaic effect (BPVE), featuring polarization-dependent uniform photoresponse at zero external bias, holds potential for exceeding the Shockley-Queisser limit in the efficiency of existing opto-electronic devices. However, the implementation of BPVE has been limited to the naturally existing materials with broken inversion symmetry, such as ferroelectrics, which suffer low efficiencies. Here, we propose metasurface-mediated graphene photodetectors with cascaded polarization-sensitive photoresponse under uniform illumination, mimicking an artificial BPVE. With the assistance of non-centrosymmetric metallic nanoantennas, the hot photocarriers in graphene gain a momentum upon their excitation and form a shift current which is nonlocal and directional. Thereafter, we demonstrate zero-bias uncooled mid-infrared photodetectors with three orders higher responsivity than conventional BPVE and a noise equivalent power of 0.12 nW Hz−1/2. Besides, we observe a vectorial photoresponse which allows us to detect the polarization angle of incident light with a single device. Our strategy opens up alternative possibilities for scalable, low-cost, multifunctional infrared photodetectors.


2002 ◽  
Vol 46 (7) ◽  
pp. 959-963
Author(s):  
E. Augendre ◽  
S. Kubicek ◽  
A. De Keersgieter ◽  
S. Mertens ◽  
R. Lindsay ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document