scholarly journals Numerical simulation to analyze the physical behavior of centrifugal pumps as a turbine

2021 ◽  
Vol 2139 (1) ◽  
pp. 012007
Author(s):  
G C Prada Botia ◽  
J A Pabón León ◽  
M S Orjuela Abril
Keyword(s):  
Numerical Simulation ◽  
Numerical Simulations ◽  
Energy Use ◽  
Maximum Efficiency ◽  
Maximum Relative Error ◽  
Centrifugal Pumps ◽  
Flow Conditions ◽  
Physical Behavior ◽  
Evaluation Of Performance ◽  
Experimental Test Bench

Abstract In this research, a methodology based on the development of numerical simulations is proposed to analyze the physical behavior of centrifugal pumps such as a turbine. Numerical simulations were carried out using OpenFOAM software. For the validation of the numerical model, the construction of an experimental test bench was carried out. The analysis carried out involves the evaluation of performance parameters of the pump as a turbine, such as head, power, and efficiency. Additionally, the effect of the rotation speed on the previous parameters is evaluated. From the results obtained, it was shown that the maximum relative error was 4%, 3.4%, and 3.8% for the head, power, and efficiency parameters, respectively. In general, it was evidenced that the proposed numerical simulation has the ability to describe the real trends of the pump as a turbine for different flow conditions. In addition, an 11% increase in rotational speed was shown to cause a 12%, 1.9%, and 3% increase in head, power, and maximum efficiency. The proposed methodology is considered an adequate tool to analyze performance and identify the best efficiency point of pump systems such as a turbine. In this way, greater energy use is guaranteed.

Numerical Simulations on Assembly Modifications for Annular Casing of One Centrifugal Pump

2012 ◽  
Vol 516-517 ◽  
pp. 966-969
Author(s):  
Yi Zhang Fan ◽  
Zhi Gang Zuo ◽  
Shu Hong Liu ◽  
Yu Jun Sha ◽  
Yu Lin Wu
Keyword(s):  
Numerical Simulation ◽  
High Pressure ◽  
High Temperature ◽  
Numerical Simulations ◽  
Centrifugal Pump ◽  
Radial Force ◽  
Hydraulic Efficiency ◽  
Centrifugal Pumps ◽  
Safety Factors ◽  
Simulation Results

Centrifugal pumps adopt annular casings instead of volute casings when working in high temperature and high pressure conditions, which results in conservative safety factors in sacrifice of hydraulic efficiency. This paper presents numerical simulations on two assembly modification methods for one annular casing imitating the volute casing to improve hydraulic performance. Method one was the eccentric axis method. Method two was the extended vane method. Numerical simulation results, given by CFX, showed that both the two method could increase the hydraulic efficiency and head while rise in radial force was small.

Modeling of mass transfer in biofilms in oscillatory flow conditions using k-ɛ turbulence model

2003 ◽  
Vol 3 (1-2) ◽  
pp. 201-207
Author(s):  
H. Nagaoka ◽  
T. Nakano ◽  
D. Akimoto
Keyword(s):  
Numerical Simulation ◽  
Mass Transfer ◽  
Turbulence Model ◽  
Uptake Rate ◽  
Oscillatory Flow ◽  
Substrate Uptake ◽  
Flow Conditions ◽  
Mass Transfer Mechanism ◽  
Substrate Uptake Rate ◽  
Good Agreement

The objective of this research is to investigate mass transfer mechanism in biofilms under oscillatory flow conditions. Numerical simulation of turbulence near a biofilm was conducted using the low Reynold’s number k-ɛ turbulence model. Substrate transfer in biofilms under oscillatory flow conditions was assumed to be carried out by turbulent diffusion caused by fluid movement and substrate concentration profile in biofilm was calculated. An experiment was carried out to measure velocity profile near a biofilm under oscillatory flow conditions and the influence of the turbulence on substrate uptake rate by the biofilm was also measured. Measured turbulence was in good agreement with the calculated one and the influence of the turbulence on the substrate uptake rate was well explained by the simulation.

scholarly journals Optimal Design of Slit Impeller for Low Specific Speed Centrifugal Pump Based on Orthogonal Test

2021 ◽  
Vol 9 (2) ◽  
pp. 121
Author(s):  
Yang Yang ◽  
Ling Zhou ◽  
Hongtao Zhou ◽  
Wanning Lv ◽  
Jian Wang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Centrifugal Pump ◽  
Large Scale ◽  
Internal Flow ◽  
Orthogonal Test ◽  
Centrifugal Pumps ◽  
Initial Model ◽  
Low Specific Speed ◽  
Specific Speed ◽  
Four Levels

Marine centrifugal pumps are mostly used on board ship, for transferring liquid from one point to another. Based on the combination of orthogonal testing and numerical simulation, this paper optimizes the structure of a drainage trough for a typical low-specific speed centrifugal pump, determines the priority of the various geometric factors of the drainage trough on the pump performance, and obtains the optimal impeller drainage trough scheme. The influence of drainage tank structure on the internal flow of a low-specific speed centrifugal pump is also analyzed. First, based on the experimental validation of the initial model, it is determined that the numerical simulation method used in this paper is highly accurate in predicting the performance of low-specific speed centrifugal pumps. Secondly, based on the three factors and four levels of the impeller drainage trough in the orthogonal test, the orthogonal test plan is determined and the orthogonal test results are analyzed. This work found that slit diameter and slit width have a large impact on the performance of low-specific speed centrifugal pumps, while long and short vane lap lengths have less impact. Finally, we compared the internal flow distribution between the initial model and the optimized model, and found that the slit structure could effectively reduce the pressure difference between the suction side and the pressure side of the blade. By weakening the large-scale vortex in the flow path and reducing the hydraulic losses, the drainage trough impellers obtained based on orthogonal tests can significantly improve the hydraulic efficiency of low-specific speed centrifugal pumps.

scholarly journals Wind shear over the Nice Côte d'Azur airport: case studies

2013 ◽  
Vol 13 (9) ◽  
pp. 2223-2238 ◽  
Author(s):  
A. Boilley ◽  
J.-F. Mahfouf
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Numerical Simulations ◽  
Wind Shear ◽  
Horizontal Wind ◽  
Wind Profiler ◽  
Measurement Campaign ◽  
Wind Lidar ◽  
Real Time Applications ◽  
Wind Shears

Abstract. The Nice Côte d'Azur international airport is subject to horizontal low-level wind shears. Detecting and predicting these hazards is a major concern for aircraft security. A measurement campaign took place over the Nice airport in 2009 including 4 anemometers, 1 wind lidar and 1 wind profiler. Two wind shear events were observed during this measurement campaign. Numerical simulations were carried out with Meso-NH in a configuration compatible with near-real time applications to determine the ability of the numerical model to predict these events and to study the meteorological situations generating an horizontal wind shear. A comparison between numerical simulation and the observation dataset is conducted in this paper.

scholarly journals Low-pressure reversible axial fan with straight profile blades and relatively high efficiency

2012 ◽  
Vol 16 (suppl. 2) ◽  
pp. 593-603 ◽  
Author(s):  
Zivan Spasic ◽  
Sasa Milanovic ◽  
Vanja Sustersic ◽  
Boban Nikolic
Keyword(s):  
Numerical Simulations ◽  
High Efficiency ◽  
Suction Side ◽  
Standard Test ◽  
Maximum Efficiency ◽  
Specific Work ◽  
Blade Profile ◽  
Operating Characteristics ◽  
Axial Fan ◽  
Increase Energy Efficiency

The paper presents the design and operating characteristics of a model of reversible axial fan with only one impeller, whose reversibility is achieved by changing the direction of rotation. The fan is designed for the purpose of providing alternating air circulation in wood dryers in order to reduce the consumption of electricity for the fan and increase energy efficiency of the entire dryer. To satisfy the reversibility of flow, the shape of the blade profile is symmetrical along the longitudinal and transversal axes of the profile. The fan is designed with equal specific work of all elementary stages, using the method of lift forces. The impeller blades have straight mean line profiles. The shape of the blade profile was adopted after the numerical simulations were carried out and high efficiency was achieved. Based on the calculation and conducted numerical simulations, a physical model of the fan was created and tested on a standard test rig, with air loading at the suction side of the fan. The operating characteristics are shown for different blade angles. The obtained maximum efficiency was around 0.65, which represents a rather high value for axial fans with straight profile blades.

Stefan Number-Insensitive Numerical Simulation of the Enthalpy Method for Stefan Problems Using the Space-Time Conservation Element and Solution Element Method

2004 ◽  
Author(s):  
Anahita Ayasoufi ◽  
Theo G. Keith ◽  
Ramin K. Rahmani
Keyword(s):  
Numerical Simulation ◽  
Phase Change ◽  
Numerical Simulations ◽  
Latent Heat ◽  
Space Time ◽  
Enthalpy Method ◽  
Stefan Problems ◽  
Stefan Number ◽  
Original Scheme ◽  
Solution Element

An improvement is introduced to the conservation element and solution element (CE/SE) phase change scheme presented previously. The improvement addresses a well known weakness in numerical simulations of the enthalpy method when the Stefan number, (the ratio of sensible to latent heat) is small (less than 0.1). Behavior of the improved scheme, at the limit of small Stefan numbers, is studied and compared with that of the original scheme. It is shown that high dissipative errors, associated with small Stefan numbers, do not occur using the new scheme.

Pneumatic pulsator design as an example of numerical simulations in engineering applications

2012 ◽  
Vol 2 (1) ◽  
Author(s):  
Krzysztof Wołosz ◽  
Jacek Wernik
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Cast Iron ◽  
Numerical Simulations ◽  
Stress Analysis ◽  
Aluminium Alloy ◽  
Loose Material ◽  
Engineering Applications ◽  
Pressure Losses ◽  
Pneumatic Impact

AbstractThe paper presents the part of the investigation that has been carried out in order to develop the pneumatic pulsator which is to be employed as an unblocking device at lose material silo outlets. The part of numerical simulation is reported. The fluid dynamics issues have been outlined which are present during supersonic airflow thought the head of the pulsator. These issues describe the pneumatic impact phenomenon onto the loose material bed present in the silo to which walls the pulsator is assembled. The investigation presented in the paper are industrial applicable and the result is the working prototype of the industrial pneumatic pulsator. The numerical simulation has led to change the piston shape which is moving inside the head of the pulsator, and therefore, to reduce the pressure losses during the airflow. A stress analysis of the pulsator controller body has been carried out while the numerical simulation investigation part of the whole project. The analysis has made possible the change of the controller body material from cast iron to aluminium alloy.

Prediction of Pump Performance Under Air-Water Two-Phase Flow Based on a Bubbly Flow Model

1993 ◽  
Vol 115 (4) ◽  
pp. 781-783 ◽  
Author(s):  
Kiyoshi Minemura ◽  
Tomomi Uchiyama
Keyword(s):  
Two Phase Flow ◽  
Bubbly Flow ◽  
Phase Flow ◽  
Centrifugal Pumps ◽  
Flow Conditions ◽  
Two Phase ◽  
Performance Change ◽  
Void Fractions ◽  
Two Phases

This paper is concerned with the determination of the performance change in centrifugal pumps operating under two-phase flow conditions using the velocities and void fractions calculated under the assumption of an inviscid bubbly flow with slippage between the two phases. The estimated changes in the theoretical head are confirmed with experiments within the range of bubbly flow regime.

Numerical simulation of squeezing Cu–Water nanofluid flow by a kernel-based method

2021 ◽  
pp. 2250005
Author(s):  
Mojtaba Fardi ◽  
Yasir Khan
Keyword(s):  
Numerical Simulation ◽  
Hilbert Space ◽  
Linear System ◽  
Numerical Simulations ◽  
Numerical Results ◽  
Kernel Matrix ◽  
Nanofluid Flow ◽  
Parallel Disks ◽  
Engineering Problems ◽  
Well Conditioning

The main aim of this paper is to propose a kernel-based method for solving the problem of squeezing Cu–Water nanofluid flow between parallel disks. Our method is based on Gaussian Hilbert–Schmidt SVD (HS-SVD), which gives an alternate basis for the data-dependent subspace of “native” Hilbert space without ever forming kernel matrix. The well-conditioning linear system is one of the critical advantages of using the alternate basis obtained from HS-SVD. Numerical simulations are performed to illustrate the efficiency and applicability of the proposed method in the sense of accuracy. Numerical results obtained by the proposed method are assessed by comparing available results in references. The results demonstrate that the proposed method can be recommended as a good option to study the squeezing nanofluid flow in engineering problems.

Numerical Modeling of Multi-Frequency Complex Dielectric Permittivity Dispersion of Sedimentary Rocks

Geophysics ◽  
2021 ◽  
pp. 1-69
Author(s):  
Artur Posenato Garcia ◽  
Zoya Heidari
Keyword(s):  
Numerical Simulation ◽  
Dielectric Permittivity ◽  
Numerical Simulations ◽  
Dielectric Response ◽  
Water Saturation ◽  
Pore Scale ◽  
Simulation Results ◽  
Wet Rocks ◽  
Permittivity Measurements ◽  
The Impact

The dielectric response of rocks results from electric double layer (EDL), Maxwell-Wagner (MW), and dipolar polarizations. The EDL polarization is a function of solid-fluid interfaces, pore water, and pore geometry. MW and dipolar polarizations are functions of charge accumulation at the interface between materials with contrasting impedances and the volumetric concentration of its constituents, respectively. However, conventional interpretation of dielectric measurements only accounts for volumetric concentrations of rock components and their permittivities, not interfacial properties such as wettability. Numerical simulations of dielectric response of rocks provides an ideal framework to quantify the impact of wettability and water saturation ( Sw) on electric polarization mechanisms. Therefore, in this paper we introduce a numerical simulation method to compute pore-scale dielectric dispersion effects in the interval from 100 Hz to 1 GHz including impacts of pore structure, Sw, and wettability on permittivity measurements. We solve the quasi-electrostatic Maxwell's equations in three-dimensional (3D) pore-scale rock images in the frequency domain using the finite volume method. Then, we verify simulation results for a spherical material by comparing with the corresponding analytical solution. Additionally, we introduce a technique to incorporate α-polarization to the simulation and we verify it by comparing pore-scale simulation results to experimental measurements on a Berea sandstone sample. Finally, we quantify the impact of Sw and wettability on broadband dielectric permittivity measurements through pore-scale numerical simulations. The numerical simulation results show that mixed-wet rocks are more sensitive than water-wet rocks to changes in Sw at sub-MHz frequencies. Furthermore, permittivity and conductivity of mixed-wet rocks have weaker and stronger dispersive behaviors, respectively, when compared to water-wet rocks. Finally, numerical simulations indicate that conductivity of mixed-wet rocks can vary by three orders of magnitude from 100 Hz to 1 GHz. Therefore, Archie’s equation calibrated at the wrong frequency could lead to water saturation errors of 73%.

Sign in / Sign up

Export Citation Format

Share Document