scholarly journals Production and validation of scintillating structural components from low-background Poly(ethylene naphthalate)

2022 ◽  
Vol 17 (01) ◽  
pp. P01010
Author(s):  
Y. Efremenko ◽  
M. Febbraro ◽  
F. Fischer ◽  
M. Guitart Corominas ◽  
K. Gusev ◽  
...  

Abstract Poly Ethylene Naphthalate (PEN) is an industrial polymer plastic which is investigated as a low background, transparent, scintillating and wavelength shifting structural material. PEN scintillates in the blue region and has excellent mechanical properties both at room and cryogenic temperatures. Thus, it is an ideal candidate for active structural components in experiments for the search of rare events like neutrinoless double-beta decay or dark matter recoils. Such optically active structures improve the identification and rejection efficiency of backgrounds events, like this improving the sensitivity of experiments. This paper reports on the production of radiopure and transparent PEN plates These structures can be used to mount germanium detectors operating in cryogenic liquids (LAr, LN). Thus, as first application PEN holders will be used to mount the Ge detectors in the Legend-200 experiment. The whole process from cleaning the raw material to testing the PEN active components under final operational conditions is reported.

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1291
Author(s):  
Oana Maria Ionescu ◽  
Arn Mignon ◽  
Andreea Teodora Iacob ◽  
Natalia Simionescu ◽  
Luminita Georgeta Confederat ◽  
...  

Natural compounds have been used as wound-healing promoters and are also present in today’s clinical proceedings. In this research, different natural active components such as propolis, Manuka honey, insulin, L-arginine, and Calendula officinalis infusion were included into hyaluronic acid/poly(ethylene)oxide-based electrospun nanofiber membranes to design innovative wound-dressing biomaterials. Morphology and average fiber diameter were analyzed by scanning electron microscopy. Chemical composition was proved by Fourier transform infrared spectroscopy, which indicated successful incorporation of the active components. The nanofiber membranes with propolis and Calendula officinalis showed best antioxidant activity, cytocompatibility, and antimicrobial properties against pathogen strains Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa and had an average diameter of 217 ± 19 nm with smooth surface aspect. Water vapor transmission rate was in agreement with the range suitable for preventing infections or wound dehydration (~5000 g/m2 24 h). Therefore, the developed hyaluronic acid/poly(ethylene)oxide nanofibers with additional natural components showed favorable features for clinical use as wound dressings.


Author(s):  
Curtis A. Rideout ◽  
Scott J. Ritchie

Retirement criteria for many structural components and particularly landing gear structural parts, are generally based on analytical fatigue methods because the current means of detecting actual component damage cannot detect sufficiently small levels of damage such that safe operation for a useful interval can be confidently determined; limiting the capability to apply damage tolerance methods. The testing completed in these projects demonstrated that Induced Positron Analysis (IPA) technologies are sensitive to the tensile plastic strain damage induced in aerospace material specimens and components. The IPA process has shown that IPA methods can reliably detect and quantify plastic strain and plastic deformation under simulated and operational conditions. A preliminary functional relationship between total strain and the normalized IPA S parameter has been developed for several aerospace materials. The fatigue testing has demonstrated the IPA technologies have potential to detect fatigue damage induced in specimens and operational components when the loads are large enough to cause plastic deformation.


Author(s):  
Maksim Gurin ◽  
◽  
Aleksey Venediktov ◽  
Yuliya Glumskova ◽  
Kristina Korneeva ◽  
...  

Damage to the tendon-ligamentous apparatus places serious limitations on a personʼs physical activity. Injuries are especially common in physically healthy people leading an active lifestyle, such as athletes. To treat such injuries in orthopaedics and traumatology, autoplastic operations are performed or prostheses made of synthetic or biological materials are installed. The known treatment methods, in spite of their effectiveness, have a number of serious drawbacks, which often limit their use. Therefore, the search for new approaches and materials for plastic ligaments is an urgent task. Today, biotissue prostheses are accumulating advantages over their synthetic counterparts. The most promising raw material for biological ligament prostheses, due to its availability in the required quantity and optimal size, is the flexor and extensor calf tendons. This paper aimed to develop a method for treating xenogenic tendon to manufacture ligament prostheses and assessing its biocompatibility in a heterotopic implantation model. To manufacture a ligament prosthesis, the raw material was subjected to mechanical cleaning and chemical-physical treatment, as well as treatment with supercritical carbon dioxide fluid with the addition of the nonionic surfactant Tween 80, which together contributed to effective decellularization and removal of other biologically active components, while maintaining the physical and mechanical parameters and natural fiberarchitectonics of native raw materials. The biocompatible properties of ligament prosthesis specimens made from the flexor and extensor calf tendons using this method were evaluated in a model of heterotopic implantation into the subcutaneous adipose tissue of rats. The results obtained confirm the promising use of this material, treated according to the proposed method, in clinical practice.


2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Shuang Shuang ◽  
Fengxia Yang ◽  
Zhiwei Li ◽  
Jiangtao Li ◽  
Xiangmin Meng

SiB6 powders were prepared by the “chemical oven” method from Si and B powders. Here combustion with acid pickling “two-step” mode replaces the traditional synthesis method which helps to avoid severe condition of high temperature and high pressure. It could realize maximum reaction temperature to about 2000°C, and the whole process just needs ∼30 s. The average diameter of products is ∼10 μm. And the raw material Si and B are ∼3 μm and ∼20 μm, respectively. The infrared emissivity of products was evaluated by UV-vis spectrum with absorption band around 250∼2500 nm. All five samples show higher emissivity over UV-visible light range with lower emissivity over near-infrared range. Typically, the sample’s Si/B ratio of 1 : 1 shows highest integral intensity for about 0.85 compared with other molar ratios. It can be used as a more simple and effective method to obtain infrared ceramic SiB6 with high emissivity.


2017 ◽  
Vol 09 (01) ◽  
pp. 22-29 ◽  
Author(s):  
V.B. Brudanin ◽  
V.G. Egorov ◽  
R. Hodák ◽  
A.A. Klimenko ◽  
P. Loaiza ◽  
...  

2021 ◽  
Vol 17 ◽  
Author(s):  
Xingxing Zhuang ◽  
Li Zhou ◽  
Renhua Miao ◽  
Shoudong Ni ◽  
Meng Li

Introduction:: Asari Radix et Rhizoma (ARR) and dried ginger (Zingiber officinalis) (DG) are often used together in drug preparations in traditional Chinese medicine (TCM) to treat respiratory diseases including cold, bronchitis and pneumonia. Previous studies suggested that ARR and/or DG may influence the pharmacokinetics of other herbal components. In the current study, we examined pharmacokinetic interactions between ARR and DG in rats after oral administration. Methods:: We developed a method based on ultra-high-performance liquid chromatography-tandem mass spectrometry to simultaneously measure serum concentrations of two active components each in ARR (L-asarinin and sesamin) and DG (6-gingerol and 6-shogaol). Adult Sprague-Dawley rats were starved overnight, then given ARR extract, DO extract, or a co-decoction of ARR and DG by gastric gavage (6 g raw material per kg body weight; n = 6 per group). Blood samples were collected prior to drug administration and at the following times (h) afterward: 0.5, 1.0, 1.5, 2.0, 3.0, 4.0, 6.0, 8.0, 12.0 and 24.0. Pharmacokinetic parameters were compared using Student’s t test for independent samples. Results:: A simple, rapid, sensitive analytical method has been developed to detect four bioactive components simultaneously in the ARR-DG herbal pair. Pharmacokinetic parameters including Cmax, Tmax, T1/2 and AUC(0~t) were calculated using the non-compartmental model with the DAS 2.0 pharmacokinetic software. For L-asarinin, Tmax was 2.00 ± 0.00 h in ARR animals and 1.67±0.26 h in ARR-DG animals (P<0.05), T1/2 was 8.58 ± 1.75 h in ARR and 11.93 ± 2.13 h in ARR-DG (P<0.05). For 6-gingerol, Cmax was 350.48 ± 23.85 ng/mL in DG animals and 300.21 ± 20.02 ng/mL in ARR-DG (P<0.01), Tmax was 2.83 ± 0.41 h in DG and 2.17 ± 0.41 h in ARR-DG (P<0.05) and AUC(0~t) was 1.93 ± 0.15 mg/mL•h in ARR and 1.70 ± 0.15 mg/mL•h in ARR-DG (P<0.05). For 6-shogaol, Cmax was 390.28 ± 26.02 ng/mL in DG animals and 455.63 ± 31.01 ng/mL in ARR-DG (P<0.01), Tmax was 2.93 ± 0.10 h in DG and 1.92 ± 0.10 h in ARR-DG (P<0.01), T1/2 was 3.74 ± 0.29 h in DG and 3.28 ± 0.22 h in ARR-DG (P<0.01), and AUC(0~t) was 2.15 ± 0.18 mg/mL•h in DG and 2.73 ± 0.15 mg/mL•h in ARR-DG (P<0.01). Conclusions:: Pharmacokinetic interations between ARR and DG decrease Tmax, increase T1/2 but do not affect overall bioavailability of L-asarinin in ARR. The interactions in ARR-DG decrease Cmax and Tmax but increase T1/2 and AUC(0~t) of 6-gingerol in DG. The interactions increase Cmax and AUC(0~t) but decrease Tmax and T1/2 of 6- shogaol in DG. Interactions in ARR-DG do not affect the pharmacokinetics of sesamin.


Author(s):  
А.И. ЧЕПКАСОВА ◽  
Н.Б. АЮШИН ◽  
Т.Н. СЛУЦКАЯ ◽  
Л.Т. КОВЕКОВДОВА

Исследована возможность использования непищевых отходов разделки трепанга дальневосточного в качестве сырья для производства БАД на основе селена и гликозидов. В качестве объектов исследования использовали отходы переработки Apostichopus japonicus: прианальные участки и венчики с щупальцами и варочные воды. Исследовано содержание селена и гликозидов в трепанге и отходах его разделки, а также содержание и распределение селена и гликозидов при гидротермической и ферментативной обработке трепанга и отходов его разделки. Установлено, что содержание селена в трепанге и отходах составляет 9,0 и 11,5 мкг/г соответственно. Увеличение кратности варки до трех приводит к накоплению селена в варочной воде из трепанга до 30,5 мкг/г, а из отходов – до 107,5 мкг/г. Показано, что при варке трепанга гликозиды высвобождаются активнее. Содержание гликозидов в трехкратной варочной воде из трепанга составляет 162, а из отходов трепанга – 112 мг на 1 г сухого веса. Обоснована суточная дозировка БАД, разработанных по предлагаемым технологическим приемам. Показана возможность использования непищевых отходов, полученных при переработке трепанга, в качестве сырья для производства БАД как источника минорных биологически активных компонентов – селена и гликозидов. The purpose of the study: assessment of the possibility of using non-food waste from cutting trepang as a raw material for the production of biologically active food additives based on the determination of the content and ratio of selenium and glycosides. As objects of the study, the Far Eastern trepang (Apostichopus japonicus), waste from its processing: prianal areas and corollas with tentacles and cooking water were used. The content of selenium and glycosides in trepang and waste from its cutting, as well as the content and distribution of selenium and glycosides during hydrothermal and enzymatic treatment of trepang and waste from its cutting, are studied. It was found that the content of selenium in trepang and wastes is 9,0 and 11,5 мg/g, respectively. An increase in the cooking rate to three leads to the accumulation of selenium in cooking water from trepang to 30,5 мg/g, and from waste to 107,5 мg/g. It is shown that glycosides are more actively released when trepang cooking, in comparison with waste. The content of glycosides in triple cooking water from trepang is 162 mg, and from the waste – 112 mg per one gram of dry weight. The daily dosage for dietary supplements developed based on the proposed technological methods is substantiated. The possibility of using non-food wastes obtained during trepang processing as a raw material for the production of biologically active food additives as a source of minor biologically active components – selenium and glycosides is shown.


Author(s):  
Suchismita Satapathy

All companies are dependent on their raw material providers. The same applies in the case of thermal power plants. The major raw material for a thermal power plant is the coal. There are a lot of companies which in turn provide this coal to the thermal power plant. Some of these companies are international; some are local, whereas the others are localized. The thermal power plants look into all the aspects of the coal providing company, before settling down for a deal. Some people are specifically assigned to the task of managing the supply chain. The main motive is to optimize the whole process and achieve higher efficiency. There are a lot of things which a thermal power plant looks into before finalizing a deal, such as the price, quality of goods, etc. Thus, it is very important for the raw material providers to understand each and every aspect of the demands of the thermal power plant. A combination of three methods—Delphi, SWARA, and modified SWARA—has been applied to a list of factors, which has later been ranked according to the weight and other relevant calculations.


2017 ◽  
Vol 12 (4) ◽  
pp. 21-34
Author(s):  
Friedrich Sick ◽  
Ralph Füger

A successful energy transition depends on storage options in order to ensure power supply stability under a fluctuating generation of a growing share of renewable energies (RE). Battery storage is expensive and raw material intensive and therefore not suitable as a sole solution. Surplus electricity may easily be converted to heat, which can be stored inexpensively for a short term. With such simple Power-to-Heat or P2H solutions, lack of electric power cannot be offset by conventional heat storage. However, if a building or an urban quarter is heated by means of cogeneration, so-called Combined Heat and Power (CHP), or heat pumps (HP), the operation can be adjusted in such a way, that the building itself, i.e. its massive structure, serves as heat storage. Electricity generation and consumption is adjusted to the requirements of the grid (reactive power control). For the supply of a Berlin quarter, built in the 1950s and equipped with a district heating network and a CHP plant, the feasibility of the concept could be proved using dynamic building simulation as the analysis tool. Sixteen percent of the total heating consumption may useably be stored and extracted from the building structure. In absolute numbers: 73 MWh/a heat can be buffered corresponding to 34 MWh/a balancing electricity. For each square meter of living area, 3.7 kWh electrical balancing energy can be buffered in the building's thermal storage capacity. Nothing else is required than a re-programming of heating and possibly cooling controls. No capital investment is needed. Well insulated and more massive structures could show a proportion of 27% of such shifted heat.


2019 ◽  
Vol 79 (7) ◽  
pp. 1348-1356 ◽  
Author(s):  
M. Damaraju ◽  
H. Yoshihara ◽  
D. Bhattacharyya ◽  
T. K. Panda ◽  
K. K. Kurilla

Abstract Phosphorus is known to be a limited non-renewable resource. Phosphorus is obtained from phosphate rock, which is likely to be depleted in the next few decades. Therefore, it is very important to find alternate sources of phosphorus from which phosphorus can be recycled and recovered. This study focuses on the recovery of phosphorus from the sludge generated from a continuous bipolar mode electrocoagulation (CBME) system, used for treating a palm oil mill effluent (POME). The sludge generated from the CBME system is leached with oxalic acid and sulphuric acid for phosphorus recovery with and without thermal treatment. Acid leaching was carried out at various time intervals using various liquid/solid (L/S) ratios of acids and sludge. The CBME system caused a 73% removal of phosphorus from POME, where phosphorus is precipitated in sludge as iron phosphates or adsorbed as phosphates depending on the pH in the system. Acid leaching resulted in nearly 85% recovery of phosphorus with both sulphuric acid and oxalic acid for sludge combusted at 900 °C. Statistical analysis was carried out to find the significance of the operational conditions on the phosphorus yield. Acid leaching results in the formation of orthophosphates, which can be used as a raw material for synthesis of chemical fertilizers.


Sign in / Sign up

Export Citation Format

Share Document