scholarly journals Justification and selection of the optimal method for draining the field of the “Angrensky” open pit mine in Uzbekistan

2021 ◽  
Vol 937 (4) ◽  
pp. 042086
Author(s):  
B Baymirzaev ◽  
S Sayyidkosimov ◽  
V Morozov ◽  
V V Morozov
Keyword(s):  
Stress Concentration ◽  
Open Pit ◽  
Lower Edge ◽  
Optimal Method ◽  
Drainage Wells ◽  
The Stability ◽  
Favorable Conditions ◽  
Distribution Of Stresses ◽  
Selection Of ◽  
Polarization Optical Method

Abstract An increase in the stability of the slopes of the sides of a quarry or a ledge when using drainage wells with a camouflage cavity is proved in the article by the polarization-optical method. On the obtained diagrams, the distribution of stresses within the massif clearly shows that in an intact massif, the main concentration of stresses is concentrated in the lower edge of the slope, which contributes to the formation of a plane of displacement of the massif and the development of deformations. The presence of a camouflage cavity leads to a redistribution of stresses with the formation of a stress concentration around the camouflage cavity and a significant decrease in the stress concentration in the lower edge of the slope. Thus, we can say that the use of wells with a camouflage cavity not only drains the rocks along the side, but also unloads the border massif, creating favorable conditions for increasing the stability of the drained slope of the side of the open pit.

scholarly journals Substantiation and Selection of Optimal Method of Angren Section Field Drainage

2021 ◽  
Vol 240 ◽  
pp. 02002
Author(s):  
Bakhtiyor Z. Baimirzaev ◽  
Sokhibjon T. Matkarimov
Keyword(s):  
Water Resources ◽  
National Economy ◽  
Optimal Method ◽  
Effective Operation ◽  
Horizontal Drains ◽  
Favorable Conditions ◽  
Field Drainage ◽  
Selection Of

This article describes the results of the timely drainage of the Angren section using the horizontal drains method. It thereby creates favorable conditions for the effective operation of all technological links of the unit, protecting water resources of the area where the section is located using drainage and quarry waters in the national economy.

scholarly journals ASSESSMENT OF COLLECTION SAMPLES OF THE WINTER CAMELINA PILOSA FOR PRODUCTIVITY AND ADAPTIVITY

2021 ◽  
Author(s):  
Я.П. Татьяна
Keyword(s):  
Geographical Origin ◽  
Stability Index ◽  
Steppe Zone ◽  
Forest Steppe ◽  
Ecological Adaptability ◽  
Arid Conditions ◽  
Growing Conditions ◽  
The Stability ◽  
Favorable Conditions ◽  
Selection Of

Целью исследований являлась оценка коллекционного материала рыжика озимого по урожайности и основным параметрам адаптивности. Исследования проводили в лесостепной зоне Пензенской области в 2018–2020 гг. Объектом исследований являлись образцы рыжика озимого, различного эколого-географического происхождения. В качестве стандарта использовали сорт Барон, селекции Пензенского НИИСХ. Вегетационный период озимого рыжика в 2018 году протекал в острозасушливых условиях при ГТК=0,40. Условия вегетации в 2019 году характеризовались как засушливые, ГТК составил 0,63 единицы, сумма осадков за период составила 98,1 мм. Вегетация рыжика в 2020 году проходила при более благоприятных условиях (ГТК=1,03), сумма осадков составила 147,4 мм при температуре 19,4°С. Урожайность сортообразцов озимого рыжика, за годы исследований, варьировала в широких пределах от 130,9 до 157,2 г/м2 . Наиболее высокая продуктивность отмечена у номеров к-4164 (153,0 г/м2 ), к-4169 (153,1 г/м2 ) и к-3290 (157,2 г/м2 ), которая существенно превышала сорт Барон (на 8,7-12,9 г/м). Наибольшей экологической адаптивностью отличались образцы к-3290 (Алтайский край), к-1553 (Армения), к-4169 (Чехословакия) и сорт Барон, значения которого составили bi=0,96-1,02 и S2 d1 = 0,08-0,11. Номера к-4155, к-2224 и к-3290 отличались наибольшей стабильностью и пластичностью, показатели индекса стабильности (ИС) и индекса экологической пластичности (ИЭП) которых составили 17,4-18,8% и 1,04- 1,08. Наибольшим значением уровня стабильности сорта (ПУСС) отличались образцы к-4169, к-4164 и к-1553, значения которых составили 1,40, 1,41 и 1,46 соответственно. Число стручков на растении у сортообразцов варьировало от 151 до 287 штук, при 251 штуке на растении у сорта Барон. Количество семян в стручке варьировало в пределах 13-18 штук, масса 1000 семян в пределах 1,05-1,42 г. Наиболее крупные семена были у номеров к-4165 и к-3290, масса 1000 семян которых составила 1,40 и 1,42 г соответственно. The aim of the research was to assess the collection material of winter camelina in terms of yield and main parameters of adaptability. The studies were carried out in the forest-steppe zone of the Penza region in 2018 - 2020.The object of research was samples of winter camelina of various ecological and geographical origin. Variety Baron, selection of the Penza Research Institute of Agriculture, was used as a standard. The growing season of winter camelina in 2018 proceeded in severely arid conditions with GTC=0.40. The growing conditions in 2019 were characterized as arid, the GTC was 0.63 units, the amount of precipitation for the period was 98.1 mm. Camelina vegetation in 2020 took place under more favorable conditions (GTC=1.03), the amount of precipitation was 147.4 mm at a temperature of 19.4°C. The yield of varieties of winter camelina, over the years of research, varied widely from 130.9 to 157.2 g/m2 .The highest productivity was noted for numbers k-4164 (153.0 g/m2 ), k-4169 (153.1 g/m2 ) and k-3290 (157.2 g/m2 ), which significantly exceeded the Baron variety by (8,7-12.9 g/m)2 . Samples k-3290 (Altai Territory), k-1553 (Armenia), k-4169 (Czechoslovakia) and variety Baron were characterized by the highest ecological adaptability, the values of which were bi=0.96- 1.02 and S2 d1 =0,08-0.11.The numbers k-4155, k-2224 and k-3290 were distinguished by the greatest stability and plasticity, the indicators of the stability index (IS) and the environmental plasticity index (IEP) of which were 17.4-18.8% and 1.04-1.08%. Samples k-4169, k-4164 and k-1553 were distinguished by the highest value of the level of stability of the variety (PUSS), the value of which was 1.40, 1.41 and 1.46, respectively. The number of pods per plant in the accessions varied from 151 to 287 pods, with 251 pods per plant in the Baron variety. The number of seeds in a pod varied within 13-18 pieces, the weight of 1000 seeds was within 1.05-1.42 g. The largest seeds were for numbers k-4165 and k-3290, the weight of 1000 seeds of which was 1.40 and 1.42 g, respectively.

scholarly journals METHODOLOGY OF INSTRUMENTAL CONTROL OF STABILITY OF QUARRY SLOPES USING GNSS TECHNOLOGIES

2020 ◽  
Vol 1 (1) ◽  
pp. 161-168
Author(s):  
Ekaterina V. Sitnikova ◽  
Elena N. Hmyrova ◽  
Dmitry S. Ozhigin
Keyword(s):  
Iron Ore ◽  
Satellite Observations ◽  
Open Pit ◽  
Main Task ◽  
Efficient Operation ◽  
Ore Deposit ◽  
Iron Ore Deposit ◽  
The Stability ◽  
Favorable Conditions ◽  
Instrumental Control

The article describes the methodology of instrumental monitoring of the stability of Karatemir open pit slopes using GNSS technologies. An iron ore deposit was selected to carry out the study. The exploitation of subsurface use facilities developed in an open way requires regular monitoring of the stability state of the instrument array. This is the main task for the safe and efficient operation of the entire field. The favorable conditions for conducting observations and the accuracy of satellite observations are also described. The analysis of the stability status of career slopes.

scholarly journals Spatio-temporal selection of reference genes in the two congeneric species of Glycyrrhiza

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yuping Li ◽  
Xiaoju Liang ◽  
Xuguo Zhou ◽  
Yu An ◽  
Ming Li ◽  
...  
Keyword(s):  
Gene Expression ◽  
Developmental Stage ◽  
Reference Genes ◽  
Developmental Stages ◽  
Individual Factors ◽  
Congeneric Species ◽  
Spatio Temporal ◽  
The Stability ◽  
Different Tissues ◽  
Selection Of

AbstractGlycyrrhiza, a genus of perennial medicinal herbs, has been traditionally used to treat human diseases, including respiratory disorders. Functional analysis of genes involved in the synthesis, accumulation, and degradation of bioactive compounds in these medicinal plants requires accurate measurement of their expression profiles. Reverse transcription quantitative real-time PCR (RT-qPCR) is a primary tool, which requires stably expressed reference genes to serve as the internal references to normalize the target gene expression. In this study, the stability of 14 candidate reference genes from the two congeneric species G. uralensis and G. inflata, including ACT, CAC, CYP, DNAJ, DREB, EF1, RAN, TIF1, TUB, UBC2, ABCC2, COPS3, CS, R3HDM2, were evaluated across different tissues and throughout various developmental stages. More importantly, we investigated the impact of interactions between tissue and developmental stage on the performance of candidate reference genes. Four algorithms, including geNorm, NormFinder, BestKeeper, and Delta Ct, were used to analyze the expression stability and RefFinder, a comprehensive software, provided the final recommendation. Based on previous research and our preliminary data, we hypothesized that internal references for spatio-temporal gene expression are different from the reference genes suited for individual factors. In G. uralensis, the top three most stable reference genes across different tissues were R3HDM2, CAC and TUB, while CAC, CYP and ABCC2 were most suited for different developmental stages. CAC is the only candidate recommended for both biotic factors, which is reflected in the stability ranking for the spatio (tissue)-temporal (developmental stage) interactions (CAC, R3HDM2 and DNAJ). Similarly, in G. inflata, COPS3, R3HDM2 and DREB were selected for tissues, while RAN, COPS3 and CS were recommended for developmental stages. For the tissue-developmental stage interactions, COPS3, DREB and ABCC2 were the most suited reference genes. In both species, only one of the top three candidates was shared between the individual factors and their interactions, specifically, CAC in G. uralensis and COPS3 in G. inflata, which supports our overarching hypothesis. In summary, spatio-temporal selection of reference genes not only lays the foundation for functional genomics research in Glycyrrhiza, but also facilitates these traditional medicinal herbs to reach/maximize their pharmaceutical potential.

scholarly journals A Multiple Criteria Decision Making Method to Weight the Sustainability Criteria of System Selection for Surface Mining

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3066
Author(s):  
Michał Patyk ◽  
Przemysław Bodziony ◽  
Zbigniew Krysa
Keyword(s):  
Decision Making ◽  
Performance Assessment ◽  
Multiple Criteria Decision Making ◽  
Surface Mining ◽  
Open Pit ◽  
Mining Equipment ◽  
Surface Mines ◽  
Mining Conditions ◽  
And Performance ◽  
Selection Of

Selection and assessment of mining equipment used in open pit rock mines relies chiefly on estimates of overall exploitation cost. The rational arrangement of mining equipment and systems comprising loading machines, haul trucks and crushing plants should be preceded by a thorough analysis of technical and economic aspects, such as investment outlays and the costs of further exploitation, which largely determine the costs of mining operations and the deposit value. Additionally, the operational parameters of the mining equipment ought to be considered. In this study, a universal set of evaluation criteria has been developed, and an evaluation method has been applied for the selection of surface mining equipment and the processing system to be operated in specific mining conditions, defined by the user. The objective of this study is to develop and apply the new methodology of multi-criteria selection of open pit rock mining equipment based on multiple criteria decision-making (MCDM) procedures, to enable the optimization of loading, handling and crushing processes. The methodology, underpinned by the principles of MCDM, provides the dedicated ranking procedures, including the ELECTRE III. The applied methodology allows the alternative options (variants) to be ranked accordingly. Ultimately, a more universal methodology is developed, applicable in other surface mines where geological and mining conditions are similar. It may prove particularly useful in selection and performance assessment of mining equipment and process line configurations in mining of low-quality rock deposits. Therefore, we undertook to develop universal criteria and applications for the selection and performance assessment of process machines for surface mines, taking into account environmental aspects as well as deposit quality.

scholarly journals Multi-Criteria Analysis for the Selection of the Optimal Mining Design Solution—A Case Study on Quarry “Tambura”

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3200
Author(s):  
Branimir Farkaš ◽  
Ana Hrastov
Keyword(s):  
Decision Making ◽  
Multiple Criteria Decision Making ◽  
Open Pit ◽  
Design Solution ◽  
Mine Design ◽  
Promethee Ii ◽  
Mining Design ◽  
Quarry Mine ◽  
Selection Of

Mining design is usually evaluated with different multiple-criteria decision-making (MCDM) methods when it comes to large open pit or underground ore mines, but it is not used on quarry sites. Since Croatia is mostly mining stone, the implementation of such methods in decision making of the quarry mine design is imperative but left out. In this paper, the PROMETHEE II and AHP decision-making methods are implemented on the quarry site to find out the best final quarry design contour. By implementing the MCDM methods, the best quarry model was chosen based on 22 different criteria parameters out of three final quarry designs. The chosen model is not only financially sound but also has the least environmental impact.

Stabilization of networked switched affine systems with event-triggered strategy

2021 ◽  
pp. 014233122110213
Author(s):  
Dandan Li ◽  
Zhiqiang Zuo ◽  
Yijing Wang
Keyword(s):  
Affine Systems ◽  
Switching Law ◽  
Event Time ◽  
Sliding Motion ◽  
State Dependent ◽  
Event Triggering ◽  
Stability Issue ◽  
The Stability ◽  
Event Based ◽  
Selection Of

Using an event-based switching law, we address the stability issue for continuous-time switched affine systems in the network environment. The state-dependent switching law in terms of the region function is firstly developed. We combine the region function with the event-triggering mechanism to construct the switching law. This can provide more candidates for the selection of the next activated subsystem at each switching instant. As a result, it is possible for us to activate the appropriate subsystem to avoid the sliding motion. The Zeno behavior for the switched affine system can be naturally ruled out by guaranteeing a positive minimum inter-event time between two consecutive executions of the event-triggering threshold. Finally, two numerical examples are given to demonstrate the effectiveness of the proposed method.

Research on 2D Limit Equilibrium Method of Slopes Considering the Effect of Horizontal In Situ Stress

2013 ◽  
Vol 671-674 ◽  
pp. 245-250
Author(s):  
Wen Hui Tan ◽  
Ya Liang Li ◽  
Cong Cong Li
Keyword(s):  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
In Situ Stress ◽  
Open Pit ◽  
Open Pit Mines ◽  
Equilibrium Method ◽  
Iron Mine ◽  
The Stability ◽  
Slice Method

At present, in-situ stress was not considered in Limit Equilibrium Method (LEM) of slopes, the influence of in-situ stress is very small on the stability of conventional slopes, but in deep-depressed open-pit mines, the influence should not be neglected. Formula for calculating the Factor of Safety (FOS) under the effect of horizontal in-situ stress was deduced using General Slice Method (GSM) of two-dimensional (2D) limit equilibrium method in this paper，a corresponding program SSLOPE was built, and the software was used in a deep- depressed open-pit iron mine. The results show that the FOS of the slope decreased by 20% when horizontal in-situ stress is considered, some reinforcements must be taken. Therefore, the influence of in-situ stress on slope stability should be taken into account in deep open –pit mines.

Approaches to the Organization of International Accounting in Russian Enterprises

TEM Journal ◽  
2021 ◽  
pp. 249-258
Author(s):  
Ekaterina V. Surkova ◽  
Galina A. Skachko ◽  
Larisa K. Nikandrova ◽  
Maria M. Starkova ◽  
Nina F. Sakharova
Keyword(s):  
Financial Reporting ◽  
Accounting Information ◽  
Financial Statements ◽  
Reporting Standards ◽  
Optimal Method ◽  
Accounting Standard ◽  
Financial Reporting Standards ◽  
Advantages And Disadvantages ◽  
The Individual ◽  
Selection Of

The article discusses current issues of transformation of accounting information in accordance with international financial reporting standards (IFRS). This study is primarily aimed at developing approaches that determine the need for Russian enterprises to provide accounting information comparable at the international level. The authors analyze methods of transferring data from the Russian Accounting Standard (RAS) to IFRS. The methods used to form financial statements in accordance with IFRS are discussed. The issues of the application of these methods, as well as their advantages and disadvantages, are discussed. The author's approach to the selection of the optimal method of transformation is proposed taking into account the individual needs of organizations.

Sign in / Sign up

Export Citation Format

Share Document