scholarly journals Preface

2021 ◽  
Vol 1205 (1) ◽  
pp. 011001
Keyword(s):  
Czech Republic ◽  
Building Materials ◽  
Raw Materials ◽  
Test Methods ◽  
Building Industry ◽  
Conference Program ◽  
Valuable Contribution ◽  
Difficult Situation ◽  
The Czech Republic

All the world as well as our conference faced to the pandemic in 2021. Therefore, the 24th International Conference on Building Materials, Products and Technologies (ICBMPT 2021) had to be postponed from the usual date in June to the new date 29th September to 1st October 2021. The participants appreciated our choice to organize the conference again in the beautiful town of Telč in the Czech Republic, which is popular with many tourists, because it belongs to the cultural heritage under protection of UNECSCO. Despite the difficult situation, the organizers from the Research Institute for Building Materials collected 23 interesting papers among research workplaces in the Czech Republic and abroad. The conference brings not only interesting presentations, but also it creates a platform for scientific discussions and proposals of new mutual projects. The main topics of ICBMPT 2021 were: Inorganic binders, Composite materials, Building materials based on secondary raw materials and Technology and test methods in building industry. Also, several keynote speakers were attracted to contribute to our conference. Besides the conference program, there was a possibility to take part in the specialized workshop Healthy buildings with many interesting topics, among others asbestos treatment and biodeteriogens in building environment. We would like to thank all the participants for their valuable contribution to the conference. We would like to express our gratitude to the reviewers for their time, valuable recommendations and constructive evaluation, in order to guarantee high quality of all the papers. We are looking forward to the next conference in better times! List of Scientific committee, Editors, are available in this pdf.

Usability of Fly Ashes from Czech Republic for Sintered Artificial Aggregate

2014 ◽  
Vol 887-888 ◽  
pp. 805-808 ◽  
Author(s):  
Vit Cerný ◽  
Šárka Keprdová
Keyword(s):  
Czech Republic ◽  
Fly Ash ◽  
Building Materials ◽  
Drying Process ◽  
Technological Parameters ◽  
The Czech Republic ◽  
Firing Strength ◽  
Weight Structure ◽  
And Behavior

Artificial sintered aggregate produced by self-firing is one of the few building materials, which can be produced with only fly ash. If the character of the fly ash is optimal, no other additions are needed. However, not every fly ash has optimal composition. Quality of fly ash then influences composition of the mix, technological parameters and quality of produced aggregate. Parameters influence the process of self-firing, strength of granules during the phases of drying process, ignition and burning under given underpressure on an agglomerating bed. This often influences correct setting of proportion of combustion material and reduces quality of aggregate. The paper evaluates fly ash produced in the Czech Republic by both high temperature and fluidized bed combustions. Their granulometry, specific surface, bulk weight, structure, chemical composition and behavior at higher temperatures up to the melting point are evaluated.

INTERNATIONAL GRANT COOPERATION AS A TOOL FOR THE DEVELOPMENT OF PROFESSIONAL COMPETENCIES OF UNIVERSITY TEACHERS

2018 ◽  
pp. 4-8
Author(s):  
Milan Chmura
Keyword(s):  
Higher Education ◽  
Czech Republic ◽  
Professional Education ◽  
European Countries ◽  
International Project ◽  
The Czech Republic ◽  
University Teachers ◽  
Quality Of Higher Education ◽  
Education And Development

The education and development of university teachers have its justifcation and its importance is signifcant not only in the Czech Republic but also abroad. This study provides an analysis of further professional education of university teachers in the Czech Republic and in selected European countries. Subsequently, it presents an international project with participants from the Czech Republic, Ukraine, Slovakia and Poland, which, ultimately, plays a role in the improvement of the quality of higher education.

Review of quality of life studies in the Czech Republic

1998 ◽  
Vol 13 (S4) ◽  
pp. 319s-319s
Author(s):  
E. Dragomirecká ◽  
C. Škoda
Keyword(s):  
Quality Of Life ◽  
Czech Republic ◽  
The Czech Republic

Development of Mixture "Clay – Electro-Smelting Slag" for Ceramic Brick

2014 ◽  
Vol 682 ◽  
pp. 480-484 ◽  
Author(s):  
V.F. Torosyan ◽  
E.S. Torosyan
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Ceramic Brick ◽  
Ceramic Samples ◽  
Manufactured Products ◽  
Smelting Slag ◽  
Compression Resistance ◽  
Mixing Water ◽  
Melting Slag

Industrial transition to a totally new level of resources and energy saving necessitates improving the technical level of building materials manufacturing, growing their raw materials base, the assortment, enhancing the quality of manufactured products, cutting their cost price. It requires, first of all, carrying out more detailed research in properties of clay and clay loams, and selecting optimal additives for pottery works. Such disadvantages of clays as burning sensitivity, low compression resistance and flexural strength in a burnt state, low frost resistance cause the impossibility of their application without corrective additives. It is quite difficult to find an additive which can solve all the technological problems mentioned above. This paper provides the development of mixture "clay – electro-melting slag" for ceramic brick, moreover, addition of a steel-smelting slag in the fusion mixture results in the change in mixing water content of ceramic masses, strength and coloration of ceramic samples.

scholarly journals ANALYSIS OF THE INFLUENCE OF INDUSTRIAL WASTE IN THE FORM OF CERAMIC CHIPS CRUSHING DROPOUTS ON THE MAIN PROPERTIES OF CEMENT COMPOSITES

2021 ◽  
Vol 4 (1) ◽  
pp. 27-34
Author(s):  
S-A.Yu. Murtazaev ◽  
A. Uspanova ◽  
M. Hadzhiev ◽  
V. Hadisov
Keyword(s):  
Building Materials ◽  
Environmental Problem ◽  
Raw Materials ◽  
Housing Stock ◽  
Cement Composites ◽  
Optimal Composition ◽  
Ceramic Brick ◽  
Concrete Mixtures ◽  
Technogenic Raw Materials

during the implementation of the program to restore the housing stock of the Chechen Republic, as well as during the planned demolition of dilapidated housing, significant volumes of technogenic raw materials were generated, in particular, large volumes of brick and concrete scrap. Enterprises for the production of building materials and products also produce significant volumes of production defects, which accumulate over the years at landfills. Ceramic broken brick and broken brick dropouts are used to fill the roadbed, and the main part still goes to the dump and landfill, which is also an environmental problem. One of the promising ways to use dropouts and broken brick itself is to use them as secondary aggregates in concrete and mortars. This article discusses the issues of improving the quality of ceramic concrete mixtures, choosing the optimal composition and technology for mixing concrete mixtures using dust fractions of dropouts for crushing ceramic brick bricks

scholarly journals Quality of malting barley crop 2009 in the Czech Republic.

2010 ◽  
Vol 56 (1) ◽  
pp. 10-17 ◽  
Author(s):  
Ivo HARTMAN ◽  
Josef PROKEŠ ◽  
Alena HELÁNOVÁ
Keyword(s):  
Czech Republic ◽  
Malting Barley ◽  
The Czech Republic ◽  
Barley Crop

Quality of Life Modeling at the Regional Level

2012 ◽  
pp. 163-186
Author(s):  
Jirí Krupka ◽  
Miloslava Kašparová ◽  
Pavel Jirava ◽  
Jan Mandys
Keyword(s):  
Quality Of Life ◽  
Czech Republic ◽  
Decision Tree ◽  
Decision Rules ◽  
Real Data ◽  
Classification Model ◽  
Data Sets ◽  
The Czech Republic ◽  
First Case

The chapter presents the problem of quality of life modeling in the Czech Republic based on classification methods. It concerns a comparison of methodological approaches; in the first case the approach of the Institute of Sociology of the Academy of Sciences of the Czech Republic was used, the second case is concerning a project of the civic association Team Initiative for Local Sustainable Development. On the basis of real data sets from the institute and team initiative the authors synthesized and analyzed quality of life classification models. They used decision tree classification algorithms for generating transparent decision rules and compare the classification results of decision tree. The classifier models on the basis of C5.0, CHAID, C&RT and C5.0 boosting algorithms were proposed and analyzed. The designed classification model was created in Clementine.

scholarly journals Mining processes of brick products in the Czech Republic

2020 ◽  
Vol 168 ◽  
pp. 00007
Author(s):  
Jan Fiala ◽  
Miroslav Lapka ◽  
Jan Fiala jun ◽  
Milan Mikolas
Keyword(s):  
New York ◽  
Czech Republic ◽  
Building Materials ◽  
Process Mining ◽  
Ceramic Product ◽  
The Czech Republic ◽  
Building Product ◽  
The World ◽  
Mining Methods ◽  
Great Wall

First technological process, which ceramic producers of ceramic products use for their future ceramic product is mining process. Mining methods, Transport methods and processing methods are basic technological processes. The process of drying, firing and shaping of brick products are specific. Babylonian gardens, Hagia Sofia, are one of the most beautiful churches that has ever been built. The great Wall of China, medieval castle Malbork from northern Poland not far from Gdansk`s bay which resembles small town, Skyscraper Chrysler Building in New York are the outstanding brick creations in the world. All of these buildings have one thing in common and that is material from which they were built. The material is brick, one of the simplest, the most beautiful, the most universal and the oldest building product which is known for moreover than 10 000 years [1]. Brick association of Czech and Moravia, nowadays unites 6 regular members with 19 plants where are created fired building materials. Furthermore it unites 7 associated members who ensure various services for brickmakers and 7 honorary members. Producers, members of brick association represent 92 % of Mason material capacity in the Czech Republic and 100 % of fired roofing tile capacity.

scholarly journals Polymorphism of prolamin proteins of the grain of triticale varieties certifiedin the Czech Republic

2011 ◽  
Vol 51 (No. 4) ◽  
pp. 151-155 ◽  
Author(s):  
T. Vyhnánek ◽  
J. Bednář
Keyword(s):  
Genetic Diversity ◽  
Czech Republic ◽  
Cold Resistance ◽  
The Czech Republic ◽  
Baking Quality ◽  
The Individual

 Genetic diversity was detected in 11 varieties of triticale registered in the Czech Republic by means of polymorphism of prolamin proteins using the PAGE ISTA method. The polymorphism of prolamin proteins allowed the differentiation of the individual triticale varieties in 2002 and 2003 harvests. On the basis of Dice’s calculations of coefficients of similarity we discovered, in parallel with the uniform genotypes, genotypes with sister prolamin spectrums with a different percentage of participation in the respective years. A uniform spectrum was detected in the following varieties: Disco, Kolor, Lamberto, Marko, Presto, Sekundo, Ticino and Tricolor; Kitaro and Modus were dimorphous varieties. In 2003 three sister prolamin lines appeared in the variety Gabo and in 2004 only two. In 2003 a 5% admixture of a foreign genotype was detected in the variety Marko. Typical of the unknown genotype was the gliadin block Gld 1B3, which is the marker of rye translocation T1BL.1RS, gene Sr31 with resistance to black rust, higher cold resistance and lower baking quality of the wheat. The prolamin proteins of triticale grain are suitable for the detection of the genetic diversity and for the assessment of varietal authenticity and purity in seed samples of triticale varieties registered in the Czech Republic.

Sign in / Sign up

Export Citation Format

Share Document