scholarly journals Anti-plane shear waves in periodic elastic composites: band structure and anomalous wave refraction

2015 ◽  
Vol 471 (2180) ◽  
pp. 20150152 ◽  
Author(s):  
Sia Nemat-Nasser
Keyword(s):  
Band Structure ◽  
Phase Velocity ◽  
Negative Refraction ◽  
Mass Density ◽  
Shear Waves ◽  
Variable Mass ◽  
Three Dimensional ◽  
Positive Energy ◽  
Plane Shear ◽  
Elastic Composites

For anti-plane shear waves in periodic elastic composites, it is shown that negative energy refraction can be accompanied by positive phase-velocity refraction and positive energy refraction can be accompanied by negative phase-velocity refraction , and that this can happen over a broad range of frequencies. Hence, in general, negative refraction does not necessarily require antiparallel group and phase-velocity vectors. Details are given for layered composites and the results are extended to, and illustrated for, two-dimensional periodic composites, revealing a wealth of information about the refractive characteristics of this class of composites. The composite's unit cell may consist of any number of constituents of any variable mass density and elastic modulus, admitting large discontinuities . A powerful variational-based solution method is used that applies to one-, two- and three-dimensional composites, irrespective of their constituents being homogeneous or heterogeneous. The calculations are direct, accurate and efficient, yielding the band structure, group-velocity, energy-flux and phase-velocity vectors as functions of the frequency and wavevector components, over an entire frequency band.

Propagation of In-Plane Shear Waves in Magnetically Affected Highly Conductive Nanofilms by Considering Both Surface and Nonlocality Effects

2016 ◽  
Vol 138 (3) ◽  
Author(s):  
Keivan Kiani
Keyword(s):  
Magnetic Field ◽  
Surface Energy ◽  
Field Strength ◽  
Phase Velocity ◽  
Magnetic Field Strength ◽  
Scale Parameter ◽  
Shear Waves ◽  
Cutoff Frequency ◽  
Small Scale ◽  
Plane Shear

To study the size and surface effects on characteristics of in-plane shear waves in magnetically affected nanofilms, a novel model is developed. Using nonlocal and surface continuum theories, the governing equations are established and appropriate boundary conditions are imposed at the bottom and top surfaces of the nanofilm. The dispersion relations associated with symmetric and asymmetric modes are obtained. The effects of the surface energy, small-scale parameter, nanofilm's thickness, and magnetic field strength on dispersion curves are addressed. The limitations of the classical theory of elasticity are discussed. The obtained results show that the phase velocity of the propagated in-plane shear waves magnifies by an increase of the thickness as well as magnetic field strength. However, the phase velocity commonly decreases as the effect of the surface energy or nonlocality increases. Such a fact is more obvious for higher modes of vibration. Generally, the cutoff frequency reaches a lower value as the nanofilm's thickness reduces or the small-scale parameter increases. Additionally, variation of the magnetic field strength has fairly no influence on the cutoff frequency.

scholarly journals Overall dynamic properties of three-dimensional periodic elastic composites

2011 ◽  
Vol 468 (2137) ◽  
pp. 269-287 ◽  
Author(s):  
Ankit Srivastava ◽  
Sia Nemat-Nasser
Keyword(s):  
Effective Properties ◽  
Dynamic Properties ◽  
Mass Density ◽  
Three Dimensional ◽  
Linear Momentum ◽  
Three Dimensions ◽  
Theoretical Treatment ◽  
Periodic Composite ◽  
Constitutive Parameters ◽  
Elastic Composites

This article presents a method for the homogenization of three-dimensional periodic elastic composites. It allows for the evaluation of the averaged overall frequency-dependent dynamic material constitutive tensors relating the averaged dynamic field variable tensors of velocity, strain, stress and linear momentum. Although the form of the dynamic constitutive relation for three-dimensional elastodynamic wave propagation has been known, this is the first time that explicit calculations of the effective parameters (for three dimensions) are presented. We show that for three-dimensional periodic composites, the overall compliance (stiffness) tensor, as produced directly by our formulation, is Hermitian, regardless of whether the corresponding unit cell is geometrically or materially symmetric. Overall, mass density is shown to be a tensor and, like the overall compliance tensor, always Hermitian. The average strain and linear momentum tensors are, however, coupled, and the coupling tensors are shown to be each others' Hermitian transpose. Finally, we present a numerical example of a three-dimensional periodic composite composed of elastic cubes periodically distributed in an elastic matrix. The presented results corroborate the predictions of the theoretical treatment illustrating the frequency dependence of the constitutive parameters. We also show that the effective properties calculated in this paper satisfy the dispersion relation of the composite.

Mass Determination by Direct Measurement of Electron Scattering

1975 ◽  
Vol 33 ◽  
pp. 240-241
Author(s):  
M. K. Lamvik ◽  
A. V. Crewe
Keyword(s):  
Cross Section ◽  
Electron Scattering ◽  
Mass Density ◽  
Variable Mass ◽  
Scattering Cross Section ◽  
Mass Determination ◽  
Number Density ◽  
Cross Sectional ◽  
Thin Slice ◽  
Scattering Cross

If a molecule or atom of material has molecular weight A, the number density of such units is given by n=Nρ/A, where N is Avogadro's number and ρ is the mass density of the material. The amount of scattering from each unit can be written by assigning an imaginary cross-sectional area σ to each unit. If the current I0 is incident on a thin slice of material of thickness z and the current I remains unscattered, then the scattering cross-section σ is defined by I=IOnσz. For a specimen that is not thin, the definition must be applied to each imaginary thin slice and the result I/I0 =exp(-nσz) is obtained by integrating over the whole thickness. It is useful to separate the variable mass-thickness w=ρz from the other factors to yield I/I0 =exp(-sw), where s=Nσ/A is the scattering cross-section per unit mass.

Image formation analysis of thick biological specimens using three-dimensional power-spectra of through focus series

1994 ◽  
Vol 52 ◽  
pp. 124-125
Author(s):  
Karen F. Han
Keyword(s):  
Inelastic Scattering ◽  
Imaging Techniques ◽  
Mass Density ◽  
Relative Proportion ◽  
Three Dimensional ◽  
Power Spectra ◽  
Image Formation ◽  
Energy Filtering ◽  
Ewald Sphere ◽  
Nonlinear Imaging

The primary focus in our laboratory is the study of higher order chromatin structure using three dimensional electron microscope tomography. Three dimensional tomography involves the deconstruction of an object by combining multiple projection views of the object at different tilt angles, image intensities are not always accurate representations of the projected object mass density, due to the effects of electron-specimen interactions and microscope lens aberrations. Therefore, an understanding of the mechanism of image formation is important for interpreting the images. The image formation for thick biological specimens has been analyzed by using both energy filtering and Ewald sphere constructions. Surprisingly, there is a significant amount of coherent transfer for our thick specimens. The relative amount of coherent transfer is correlated with the relative proportion of elastically scattered electrons using electron energy loss spectoscopy and imaging techniques.Electron-specimen interactions include single and multiple, elastic and inelastic scattering. Multiple and inelastic scattering events give rise to nonlinear imaging effects which complicates the interpretation of collected images.

EXCITON INSULATOR STATES IN MATERIALS WITH ‘MEXICAN HAT’ BAND STRUCTURE DISPERSION AND IN GRAPHENE

2015 ◽  
Vol 11 (1) ◽  
pp. 2927-2949
Author(s):  
Lyubov E. Lokot
Keyword(s):  
Band Structure ◽  
Three Dimensional ◽  
Dimensional Sphere ◽  
Electron Hole ◽  
Dinger Equation ◽  
Fermi Sphere ◽  
Zinc Blende ◽  
Bulk Gan ◽  
Structure Dispersion ◽  
Excitonic States

In the paper a theoretical study the both the quantized energies of excitonic states and their wave functions in grapheneand in materials with "Mexican hat" band structure dispersion as well as in zinc-blende GaN is presented. An integral twodimensionalSchrödinger equation of the electron-hole pairing for a particles with electron-hole symmetry of reflection isexactly solved. The solutions of Schrödinger equation in momentum space in studied materials by projection the twodimensionalspace of momentum on the three-dimensional sphere are found exactly. We analytically solve an integral twodimensionalSchrödinger equation of the electron-hole pairing for particles with electron-hole symmetry of reflection. Instudied materials the electron-hole pairing leads to the exciton insulator states. Quantized spectral series and lightabsorption rates of the excitonic states which distribute in valence cone are found exactly. If the electron and hole areseparated, their energy is higher than if they are paired. The particle-hole symmetry of Dirac equation of layered materialsallows perfect pairing between electron Fermi sphere and hole Fermi sphere in the valence cone and conduction cone andhence driving the Cooper instability. The solutions of Coulomb problem of electron-hole pair does not depend from a widthof band gap of graphene. It means the absolute compliance with the cyclic geometry of diagrams at justification of theequation of motion for a microscopic dipole of graphene where >1 s r . The absorption spectrums for the zinc-blendeGaN/(Al,Ga)N quantum well as well as for the zinc-blende bulk GaN are presented. Comparison with availableexperimental data shows good agreement.

Transverse surface waves in magneto-elasticity

1966 ◽  
Vol 62 (3) ◽  
pp. 541-545 ◽  
Author(s):  
C. M. Purushothama
Keyword(s):  
Magnetic Field ◽  
Wave Propagation ◽  
Surface Waves ◽  
Elastic Medium ◽  
Uniform Magnetic Field ◽  
Shear Waves ◽  
Plane Shear ◽  
Electrically Conducting ◽  
Velocity Of Propagation

AbstractIt has been shown that uncoupled surface waves of SH type can be propagated without any dispersion in an electrically conducting semi-infinite elastic medium provided a uniform magnetic field acts non-aligned to the direction of wave propagation. In general, the velocity of propagation will be slightly greater than that of plane shear waves in the medium.

Ice-Phase Precipitation

2017 ◽  
Vol 58 ◽  
pp. 6.1-6.36 ◽  
Author(s):  
I. Gultepe ◽  
A. J. Heymsfield ◽  
P. R. Field ◽  
D. Axisa
Keyword(s):  
Collection Efficiency ◽  
Numerical Models ◽  
Mass Density ◽  
Three Dimensional ◽  
Phase Precipitation ◽  
Microphysical Parameters ◽  
Mass Size ◽  
Ice Water ◽  
Ice Phase

AbstractIce-phase precipitation occurs at Earth’s surface and may include various types of pristine crystals, rimed crystals, freezing droplets, secondary crystals, aggregates, graupel, hail, or combinations of any of these. Formation of ice-phase precipitation is directly related to environmental and cloud meteorological parameters that include available moisture, temperature, and three-dimensional wind speed and turbulence, as well as processes related to nucleation, cooling rate, and microphysics. Cloud microphysical parameters in the numerical models are resolved based on various processes such as nucleation, mixing, collision and coalescence, accretion, riming, secondary ice particle generation, turbulence, and cooling processes. These processes are usually parameterized based on assumed particle size distributions and ice crystal microphysical parameters such as mass, size, and number and mass density. Microphysical algorithms in the numerical models are developed based on their need for applications. Observations of ice-phase precipitation are performed using in situ and remote sensing platforms, including radars and satellite-based systems. Because of the low density of snow particles with small ice water content, their measurements and predictions at the surface can include large uncertainties. Wind and turbulence affecting collection efficiency of the sensors, calibration issues, and sensitivity of ground-based in situ observations of snow are important challenges to assessing the snow precipitation. This chapter’s goals are to provide an overview for accurately measuring and predicting ice-phase precipitation. The processes within and below cloud that affect falling snow, as well as the known sources of error that affect understanding and prediction of these processes, are discussed.

scholarly journals Measuring the Autocorrelation Function of Nanoscale Three-Dimensional Density Distribution in Individual Cells Using Scanning Transmission Electron Microscopy, Atomic Force Microscopy, and a New Deconvolution Algorithm

2017 ◽  
Vol 23 (3) ◽  
pp. 661-667 ◽  
Author(s):  
Yue Li ◽  
Di Zhang ◽  
Ilker Capoglu ◽  
Karl A. Hujsak ◽  
Dhwanil Damania ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Density Distribution ◽  
Scanning Transmission Electron Microscopy ◽  
Mass Density ◽  
Three Dimensional ◽  
Force Microscopy ◽  
Statistical Measures ◽  
Atomic Force ◽  
Transmission Electron ◽  
Scanning Transmission

AbstractEssentially all biological processes are highly dependent on the nanoscale architecture of the cellular components where these processes take place. Statistical measures, such as the autocorrelation function (ACF) of the three-dimensional (3D) mass–density distribution, are widely used to characterize cellular nanostructure. However, conventional methods of reconstruction of the deterministic 3D mass–density distribution, from which these statistical measures can be calculated, have been inadequate for thick biological structures, such as whole cells, due to the conflict between the need for nanoscale resolution and its inverse relationship with thickness after conventional tomographic reconstruction. To tackle the problem, we have developed a robust method to calculate the ACF of the 3D mass–density distribution without tomography. Assuming the biological mass distribution is isotropic, our method allows for accurate statistical characterization of the 3D mass–density distribution by ACF with two data sets: a single projection image by scanning transmission electron microscopy and a thickness map by atomic force microscopy. Here we present validation of the ACF reconstruction algorithm, as well as its application to calculate the statistics of the 3D distribution of mass–density in a region containing the nucleus of an entire mammalian cell. This method may provide important insights into architectural changes that accompany cellular processes.

Sign in / Sign up

Export Citation Format

Share Document