The Vision of Death: Time and Temporality

2019 ◽  
pp. 81-91
Author(s):  
Sílvia Mendonça
Keyword(s):  
Death Time

Comparison of Two Models for Process Holding Time Calculations: Convection System

1985 ◽  
Vol 48 (4) ◽  
pp. 359-363 ◽  
Author(s):  
B. MANJI ◽  
F. R. VAN DE VOORT
Keyword(s):  
Kinetic Parameters ◽  
Actual Process ◽  
Correct Process ◽  
Chemical Systems ◽  
Death Time ◽  
Thermal Death ◽  
Microbial Destruction ◽  
Thermal Death Time ◽  
Relationship Of ◽  
The Relationship

The reaction kinetics of microbial destruction in food products are generally determined by the Thermal Death Time method (TDT), while chemical changes have traditionally been calculated by the more widely accepted Arrhenius approach. These two methods do not reconcile mathematically, and simply stated, one is the inverse of the other. It was of interest therefore to consider the relationship of these methods relative to each other on a mathematically simulated and experimental basis. The kinetic parameters of Saccharomyces uvarum were determined experimentally and used to calculate simulated processes in accordance to the relationships dictated by the TDT and Arrhenius models. The simulation results indicated a discrepancy between the methods, the Arrhenius approach requiring about 16% more time to complete a process. Based on five processing trials carried out using S. uvarum the actual process times were compared to those predicted by the TDT and Arrhenius methods. The Arrhenius method predicted the correct process times on the average, while the TDT predictions were short by about 8% in terms of time. From a microbiological standpoint, these differences are not likely to be singificant, however, they may be important if the TDT method is used to characterize the kinetic parameters of more rigerously defined chemical systems.

​​Differential Disease Resistance of Indian Native Chicken Breeds to Experimental P. multocida Infection

2021 ◽  
Author(s):  
T.R. Kannaki ◽  
E. Priyanka ◽  
M. Abhilash ◽  
Santosh Haunshi
Keyword(s):  
Experimental Infection ◽  
Pasteurella Multocida ◽  
Clinical Signs ◽  
Mortality Rates ◽  
Susceptibility Pattern ◽  
Intranasal Route ◽  
Bacterial Diseases ◽  
Death Time ◽  
Native Chicken ◽  
Chicken Breeds

Background: Native chicken breeds are considered more disease tolerant than exotic chicken breeds especially for the bacterial diseases. Aseel, Ghagus and Vanaraja chicken breeds/ variety were evaluated for the disease tolerance/susceptibility pattern after experimental infection with P. multocida A:1 isolate. Methods: A total of 72 birds of three breeds viz., Aseel, Ghagus and Vanaraja (n=24 each) were divided into three groups. The birds were inoculated with 2.5x106 CFU/ml of virulent Pasteurella multocida A:1 isolate through intraperitoneal (I/P) and intranasal (I/N) routes at 12 weeks of age. Clinical signs, morbidity, mortality rates and lesions were observed in the infected birds. Result: The mortality rates were 83.3% in Assel breed against 100% in both Ghagus and Vanaraja breed in intraperitoneally infected groups. Upon intranasal infection, the mortality was 83.3% in Assel and Vanaraja breed against 100% in Ghagus breed. Aseel birds showed significantly better survivability and longer death time than Ghagus breed upon experimental infection with Pasteureall multocida A:1 isolate. Vanaraja breed showed tolerance comparable to Aseel in experimental infection via intranasal route.

Abstract 15198: Predictors of Adverse Cardiovascular Outcomes in Patients With Atrial Fibrillation and Heart Failure With Preserved Systolic Function: A Topcat Americas Post Hoc Analysis

Circulation ◽  
2020 ◽  
Vol 142 (Suppl_3) ◽  
Author(s):  
Sanjeev Saksena ◽  
April Slee ◽  
Dhanunjaya Lakkireddy ◽  
Dipen Shah ◽  
Luigi Di Biase ◽  
...  
Keyword(s):  
Heart Failure ◽  
Atrial Fibrillation ◽  
Sinus Rhythm ◽  
Proportional Hazards ◽  
Systolic Function ◽  
Cox Proportional Hazards ◽  
Study Entry ◽  
Pump Failure ◽  
Death Time ◽  
Arrhythmogenic Substrate

Introduction: Presence of atrial fibrillation (AF) is known to increase mortality and impact cardiovascular(CV) outcomes in heart failure (HF) patients (pts) with preserved systolic function (pEF) but its causes are unknown Hypothesis: We hypothesized that AF presentation & clinical factors impact mode of death & CV outcomes of HFpEF pts in the TOPCAT AMERICAS trial. Methods: We analyzed demographic, clinical, ECG and AF presentation as predictors of CV mortality, sudden death( SCD) and pump failure death(PFD). We examined two AF presentations 1. Pts in sinus rhythm (SR, n=1319) compared to pts in AF (n=446) on ECG at study entry or 2. Pts with no AF event by history or ECG ( n=1007 ) compared to those with any AF event (n=760 ) during a mean follow up period of 2.9 years(yrs). Results: AF pts when compared to the rest of the study population were more likely to be older, male, Caucasian origin, have more alcohol use, diabetes, percutaneous coronary interventions. 5 yr CV mortality was higher in pts with AF on ECG (30%) than those in sinus rhythm (18%, p=0.014) but 5 yr SCD was lower (10% in AF on ECG & 7% in any AF) & comparable to SR (7% & 9% respectively, p=ns). 5 yr PFD was higher (13%) than SR (5%, p=0.007. )Table shows Cox proportional hazards analysis of covariates associated with time to CV death, time to SCD & time to PFD adjusted for baseline imbalances. Conclusions:: 1. CV death risk in HFpEF pts increased with age, in minorities, smokers, diabetics, with lower systolic bp, elevated heart rate & AF on ECG.. 2. SCD was more frequent in males, African Americans & diabetics but was low in both AF & SR, perhaps due to a dominant atrial & limited ventricular arrhythmogenic substrate in HFpEF. 3. PFD in HFpEF increased with age, ECG recorded AF & elevated heart rate.This may reflect importance of atrioventricular synchrony in HFpEF. 4. The recording of AF on ECG at study entry was more strongly associated with CV death & PFD, possibly due to greater AF burden in this group compared to those with any AF even..

scholarly journals New Evo-SETI results about civilizations and molecular clock

2016 ◽  
Vol 16 (1) ◽  
pp. 40-59 ◽  
Author(s):  
Claudio Maccone
Keyword(s):  
Probability Density ◽  
Molecular Clock ◽  
Modern Human ◽  
Peak Time ◽  
List Type ◽  
Type Number ◽  
Death Time ◽  
Evolution Of Life ◽  
History Of ◽  
Life On Earth

AbstractIn two recent papers (Maccone 2013, 2014) as well as in the book (Maccone 2012), this author described the Evolution of life on Earth over the last 3.5 billion years as a lognormal stochastic process in the increasing number of living Species. In (Maccone 2012, 2013), the process used was ‘Geometric Brownian Motion’ (GBM), largely used in Financial Mathematics (Black-Sholes models). The GBM mean value, also called ‘the trend’, always is an exponential in time and this fact corresponds to the so-called ‘Malthusian growth’ typical of population genetics. In (Maccone 2014), the author made an important generalization of his theory by extending it to lognormal stochastic processes having an arbitrary trend mL(t), rather than just a simple exponential trend as the GBM have.The author named ‘Evo-SETI’ (Evolution and SETI) his theory inasmuch as it may be used not only to describe the full evolution of life on Earth from RNA to modern human societies, but also the possible evolution of life on exoplanets, thus leading to SETI, the current Search for ExtraTerrestrial Intelligence. In the Evo-SETI Theory, the life of a living being (let it be a cell or an animal or a human or a Civilization of humans or even an ET Civilization) is represented by a b-lognormal, i.e. a lognormal probability density function starting at a precise instant b (‘birth’) then increasing up to a peak-time p, then decreasing to a senility-time s (the descending inflexion point) and then continuing as a straight line down to the death-time d (‘finite b-lognormal’).(1)Having so said, the present paper describes the further mathematical advances made by this author in 2014–2015, and is divided in two halves: Part One, devoted to new mathematical results about the History of Civilizations as b-lognormals, and(2)Part Two, about the applications of the Evo-SETI Theory to the Molecular Clock, well known to evolutionary geneticists since 50 years: the idea is that our EvoEntropy grows linearly in time just as the molecular clock. (a)Summarizing the new results contained in this paper: In Part One, we start from the History Formulae already given in (Maccone 2012, 2013) and improve them by showing that it is possible to determine the b-lognormal not only by assigning its birth, senility and death, but rather by assigning birth, peak and death (BPD Theorem: no assigned senility). This is precisely what usually happens in History, when the life of a VIP is summarized by giving birth time, death time, and the date of the peak of activity in between them, from which the senility may then be calculated (approximately only, not exactly). One might even conceive a b-scalene (triangle) probability density just centred on these three points (b, p, d) and we derive the relevant equations. As for the uniform distribution between birth and death only, that is clearly the minimal description of someone's life, we compare it with both the b-lognormal and the b-scalene by comparing the Shannon Entropy of each, which is the measure of how much information each of them conveys. Finally we prove that the Central Limit Theorem (CLT) of Statistics becomes a new ‘E-Pluribus-Unum’ Theorem of the Evo-SETI Theory, giving formulae by which it is possible to find the b-lognormal of the History of a Civilization C if the lives of its Citizens Ci are known, even if only in the form of birth and death for the vast majority of the Citizens.(b)In Part Two, we firstly prove the crucial Peak-Locus Theorem for any given trend mL(t) and not just for the GBM exponential. Then we show that the resulting Evo-Entropy grows exactly linearly in time if the trend is the exponential GMB trend.(c)In addition, three Appendixes (online) with all the relevant mathematical proofs are attached to this paper. They are written in the Maxima language, and Maxima is a symbolic manipulator that may be downloaded for free from the web.In conclusion, this paper further increases the huge mathematical spectrum of applications of the Evo-SETI Theory to prepare Humans for the first Contact with an Extra-Terrestrial Civilization.

Thermal Inactivation of Escherichia coli in Camel Milk

2003 ◽  
Vol 66 (9) ◽  
pp. 1708-1711 ◽  
Author(s):  
SHLOMO SELA ◽  
RIKY PINTO ◽  
UZI MERIN ◽  
BARUCH ROSEN
Keyword(s):  
Escherichia Coli ◽  
Thermal Inactivation ◽  
Bovine Milk ◽  
Milk Composition ◽  
Camel Milk ◽  
E Coli ◽  
Death Time ◽  
Thermal Death ◽  
Milk Industry ◽  
Thermal Death Time

Camels subsist and produce milk in desert pastures not utilized by other domesticated herbivores. Developing the camel milk industry can improve the economy of desert inhabitants. To comply with sanitary ordinances, camel milk is pasteurized by procedures specified for bovine milk. It is widely accepted that milk composition might affect bacterial thermal death time (TDT). Camel and bovine milks markedly differ in their chemical composition, yet data regarding TDT values of bacteria in camel milk is missing. As a first step toward developing specific heat treatments appropriate for camel milk, TDT curves of Escherichia coli in artificially contaminated camel and cow milks have been compared. Heating the milks to temperatures ranging from 58 to 65°C yields similar thermal death curves and derived D- and z-values. These findings suggest that, in this temperature range, E. coli might behave similarly in bovine and camel milk. Additional TDT studies of various pathogenic species in camel milk are required before establishing pasteurization conditions of camel milk.

Heat Resistance of Juice Spoilage Microorganisms

2002 ◽  
Vol 65 (8) ◽  
pp. 1271-1275 ◽  
Author(s):  
ADRIENNE E. H. SHEARER ◽  
ALEJANDRO S. MAZZOTTA ◽  
ROLENDA CHUYATE ◽  
DAVID E. GOMBAS
Keyword(s):  
Heat Resistance ◽  
Process Conditions ◽  
Citrate Buffer ◽  
Ph Values ◽  
Death Time ◽  
High Fructose ◽  
Thermal Death ◽  
Challenge Tests ◽  
D Values ◽  
Thermal Death Time

The heat resistance of various yeasts (Saccharomyces cerevisiae, Rhodotorula mucilaginosa, Torulaspora delbrueckii, and Zygosaccharomyces rouxii), molds (Penicillium citrinum, Penicillium roquefortii, and Aspergillus niger), and lactic acid bacteria (Lactobacillus fermentum and Lactobacillus plantarum) obtained from spoiled acid or acidified food products was determined in 0.1 M citrate buffer at pH values of 3.0, 3.5, and 4.0. S. cerevisiae was the most heat resistant of the microorganisms in citrate buffer, and its heat resistance was further evaluated in apple, grapefruit, calcium-fortified apple, and tomato juices as well as in a juice base with high fructose corn syrup. Decimal reduction times (D-values) and changes in temperature required to change the D-value (z-values) for S. cerevisiae were higher in the juices than in citrate buffer at all pH values tested. The D57°C(135°F)-values varied from 9.4 min in the juice product with pH 2.8 to 32 min in a calcium-added apple juice with pH 3.9. The S. cerevisiae strain used in this study can be used in thermal-death-time experiments in acidic products to calculate process conditions and in challenge tests to validate the calculated temperatures and hold times during processing.

scholarly journals Geometric Morphology of the Coracoacromial Ligament: A Cadaveric Study

2019 ◽  
Vol 2019 ◽  
pp. 1-8
Author(s):  
Mehmet Demir ◽  
Bülent Güneri
Keyword(s):  
Statistical Analysis ◽  
Shoulder Pain ◽  
Humeral Head ◽  
Common Knowledge ◽  
Coracoid Process ◽  
Coracoacromial Ligament ◽  
Death Time ◽  
The Mean ◽  
Geometric Morphology ◽  
Digital Caliper

The coracoacromial ligament (CAL), which restrains superior displacement of humeral head, connects the acromion and coracoid process. Due to the ligament’s variations and its role in shoulder pain, CAL was investigated in this study. Sixty shoulders of 34 cadavers, from persons aged 61-98 (80.95 ± 8.81) years at death time, were dissected. The lengths of lateral (LBL) and medial borders (MBL), widths of acromial (AIW) and coracoid insertions (CIW), and thicknesses of lateral (LSTAI) and medial (MSTAI) sides of acromial insertions were measured by digital caliper. The data were subjected to statistical analysis. 24 (40%) V-shaped, 12 (20%) broad-banded, 9 (15%) quadrangular, 9 (15%) Y-shaped, and 6 (10%) multiple-banded types were identified. The mean total LBL, MBL, AIW, CIW, LSTAI, and MSTAI were 34.94 ± 4.59 mm, 33.58 ± 5.31 mm, 29.82 ± 9.48 mm, 12.62 ± 3.95 mm, 1.29 ± 0.17 mm, and 0.90 ± 0.22 mm, respectively. The mean LBL (39.12 ± 4.29 mm), MBL (36.48 ± 3.9 mm), and CIW (37.01 ± 3.39 mm) were significantly greatest in quadrangular type (p<0.001). The mean AIW was slightly greatest in quadrangular type (p=0.069). The mean LSTAI was significantly greatest in multiple-banded type (1.45 ± 0.10 mm, p<0.001) whereas the mean MSTAI was significantly greatest in quadrangular type (1.23 ± 0.23 mm, p<0.001). CAL is quite variable regarding morphology, dimensions, and insertion features. Despite common knowledge, MSTAI and MBL of CAL can be greater than lateral counterparts in some types. To obtain complete release of CAL at acromion, the clearance of ligament fibers in an area with the dimensions of around 16 mm in mediolateral and 15 mm in anteroposterior direction, beginning from the lateral edge of acromial insertion, is recommended.

Sign in / Sign up

Export Citation Format

Share Document