Processing and mechanical behavior of rigid and flexible material composite systems formed via voxel digital design in polyjet additive manufacturing

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Furkan Ulu ◽  
Ravi Pratap Singh Tomar ◽  
Ram Mohan
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Additive Manufacturing ◽  
Mechanical Behavior ◽  
Digital Design ◽  
Composite Part ◽  
Content Type ◽  
Composite Systems ◽  
Polyjet Printing ◽  
Material Composite

Purpose PolyJet technology allows printing complex multi-material composite configurations using Voxel digital designs' capability, thus allowing rapid prototyping of 3D printed structural parts. This paper aims to investigate the processing and mechanical characteristics of composite material configurations formed from soft and hard materials with different distributions and sizes via voxel digital print design. Design/methodology/approach Voxels are extruded representations of pixels and represent different material information similar to each pixel representing colors in digital images. Each geometric region of a digitally designed part represented by a voxel can be printed with a different material. Multi-material composite part configurations were formed and rapidly prototyped using a PolyJet printer Stratasys J750. A design of experiments composite part configuration of a soft material (Tango Plus) within a hard material matrix (Vero Black) was studied. Composite structures with different hard and soft material distributions, but at the same volume fractions of hard and soft materials, were rapidly prototyped via PolyJet printing through developed Voxel digital printing designs. The tensile behavior of these formed composite material configurations was studied. Findings Processing and mechanical behavior characteristics depend on materials in different regions and their distributions. Tensile characterization obtained the fracture energy, tensile strength, modulus and failure strength of different hard-soft composite systems. Mechanical properties and behavior of all different composite material systems are compared. Practical implications Tensile characteristics correlate to digital voxel designs that play a critical role in additive manufacturing, in addition to the formed material composition and distributions. Originality/value Results clearly indicate that multi-material composite systems with various tensile mechanical properties could be created using voxel printing by engineering the design of material distributions, and sizes. The important parameters such as inclusion size and distribution can easily be controlled within all slices via voxel digital designs in PolyJet printing. Therefore, engineers and designers can manipulate entire morphology and material at each voxel level, and different prototype morphologies can be created with the same voxel digital design. In addition, difficulties from AM process with voxel printing for such material designs is addressed, and effective digital solutions were used for successful prototypes. Some of these difficulties are extra support material or printing the part with different dimension than it designed to achieve the final part dimension fidelity. Present work addressed and resolved such issued and provided cyber based software solutions using CAD and voxel discretization. All these increase broad adaptability of PolyJet AM in industry for prototyping and end-use.

A printability assessment framework for fabricating low variability nickel-niobium parts using laser powder bed fusion additive manufacturing

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Bing Zhang ◽  
Raiyan Seede ◽  
Austin Whitt ◽  
David Shoukr ◽  
Xueqin Huang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Uncertainty Quantification ◽  
Process Optimization ◽  
Powder Bed Fusion ◽  
Assessment Framework ◽  
Laser Powder Bed Fusion ◽  
Content Type ◽  
Powder Bed ◽  
Analytical Thermal Model

Purpose There is recent emphasis on designing new materials and alloys specifically for metal additive manufacturing (AM) processes, in contrast to AM of existing alloys that were developed for other traditional manufacturing methods involving considerably different physics. Process optimization to determine processing recipes for newly developed materials is expensive and time-consuming. The purpose of the current work is to use a systematic printability assessment framework developed by the co-authors to determine windows of processing parameters to print defect-free parts from a binary nickel-niobium alloy (NiNb5) using laser powder bed fusion (LPBF) metal AM. Design/methodology/approach The printability assessment framework integrates analytical thermal modeling, uncertainty quantification and experimental characterization to determine processing windows for NiNb5 in an accelerated fashion. Test coupons and mechanical test samples were fabricated on a ProX 200 commercial LPBF system. A series of density, microstructure and mechanical property characterization was conducted to validate the proposed framework. Findings Near fully-dense parts with more than 99% density were successfully printed using the proposed framework. Furthermore, the mechanical properties of as-printed parts showed low variability, good tensile strength of up to 662 MPa and tensile ductility 51% higher than what has been reported in the literature. Originality/value Although many literature studies investigate process optimization for metal AM, there is a lack of a systematic printability assessment framework to determine manufacturing process parameters for newly designed AM materials in an accelerated fashion. Moreover, the majority of existing process optimization approaches involve either time- and cost-intensive experimental campaigns or require the use of proprietary computational materials codes. Through the use of a readily accessible analytical thermal model coupled with statistical calibration and uncertainty quantification techniques, the proposed framework achieves both efficiency and accessibility to the user. Furthermore, this study demonstrates that following this framework results in printed parts with low degrees of variability in their mechanical properties.

Customized design and additive manufacturing of kids’ ankle foot orthosis

2020 ◽  
Vol 26 (10) ◽  
pp. 1677-1685 ◽  
Author(s):  
Harish Kumar Banga ◽  
Parveen Kalra ◽  
Rajendra M. Belokar ◽  
Rajesh Kumar
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Gait Cycle ◽  
Foot Drop ◽  
Human Gait ◽  
Content Type ◽  
Ankle Foot Orthosis ◽  
New Material ◽  
Foot Orthosis

Purpose The purpose of this study is improvement of human gait by customized design of ankle foot orthosis (AFO). An has been the most frequently used orthosis in children with cerebral palsy. AFOs are designed to boost existing features or to avoid depression or traumatize muscle contractures. The advantages of AFO’s utilized for advancement in human walk attributes for the improvement in foot deformities patients or youngsters with spastic loss of motion. In this research on the customized design of AFO's to improve gait, there are limitations during walking of foot drop patients. In children with foot drops, specific AFOs were explicitly altered to improve parity and strength which are beneficial to walking positions. Design/methodology/approach This study proposes the customized design of AFOs using computerized and additive manufacturing for producing advances to alter the design and increase comfort for foot drop patients. Structuring the proposed design fabricated by using additive manufacturing and restricted material, the investigation was finalized at the Design Analysis Software (ANSYS). The system that performs best under investigation can additionally be printed using additive manufacturing. Findings The results show that the customized design of AFOs meets the patient’s requirements and could also be an alternative solution to the existing AFO design. The biomechanical consequences and mechanical properties of additive manufactured AFOs have been comparable to historically synthetic AFOs. While developing the novel AFO designs, the use of 3D printing has many benefits, including stiffness and weight optimization, to improve biomechanical function and comfort. To defeat the issues of foot drop patients, a customized AFO is used to improve the human gait cycle with new material and having better mechanical properties. Originality/value This research work focuses on the biomechanical impacts and mechanical properties of customized 3D-printed AFOs and compares them to traditionally made AFOs. Customized AFO design using 3D printing has numerous potential advantages, including new material with lightweight advancement, to improve biomechanical function and comfort. Normally, new applications mean an incremental collection of learning approximately the behavior of such gadgets and blending the new design, composite speculation and delivered substance production. The test results aim to overcome the new AFO structure issues and display the limited components and stress examination. The outcome of the research is the improved gait cycle of foot drop patients.

The microstructure and mechanical properties of deposited-IN625 by laser additive manufacturing

2017 ◽  
Vol 23 (6) ◽  
pp. 1119-1129 ◽  
Author(s):  
Lanlan Qin ◽  
Changjun Chen ◽  
Min Zhang ◽  
Kai Yan ◽  
Guangping Cheng ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Thermal Stability ◽  
Additive Manufacturing ◽  
Dendritic Morphology ◽  
Laves Phase ◽  
Micro Hardness ◽  
Laser Additive Manufacturing ◽  
Content Type ◽  
Annealing Temperatures

Purpose Laser additive manufacturing (LAM) technology based on powder bed has been used to manufacture complex geometrical components. In this study, IN625 superalloys were fabricated by high-power fiber laser without cracks, bounding errors or porosity. Meanwhile, the objectives of this paper are to systemically investigate the microstructures, micro-hardness and the precipitated Laves phase of deposited-IN625 under different annealing temperatures. Design/methodology/approach The effects of annealing temperatures on the microstructure, micro-hardness and the precipitated Laves phase were studied by optical microscope (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectrometer (EDS), selected area electron diffraction (SAED), backscattered electron (BSE) imaging in the SEM and transmission electron microscopy (TEM), respectively. The thermal stability of the dendritic morphology about IN625 superalloys was investigated through annealing at temperatures range from 1,000°C to 1,200°C. Findings It is found that the microstructure of deposited-IN625 was typical dendrite structure. Besides, some Laves phase precipitated in the interdendritic region results in the segregation of niobium and molybdenum. The thermal stability indicate that the morphology of dendrite can be stable up to 1,000°C. With the annealing temperatures increasing from 1,000 to 1,200°C, the Laves phase partially dissolves into the γ-Ni matrix, and the morphology of the remaining Laves phase is changing from irregular shape to rod-like or block-like shape. Research limitations/implications The heat treatment used on the IN625 superalloys is helpful for knowing the evolution of microstructures and precipitated phases thermal stability and mechanical properties. Practical implications Due to the different kinds of application conditions, the original microstructure of the IN625 superalloys fabricated by LAM may not be ideal. So exploring the influence of annealing treatment on IN625 superalloys can bring theory basis and guidance for actual production. Originality/value This study continues valuing the fabrication of IN625 by LAM. It shows the effect of annealing temperatures on the shape, size and distribution of Laves phase and the microstructures of deposited-IN625 superalloys.

scholarly journals Rosin Based Composites for Additive Manufacturing

2019 ◽  
Vol 890 ◽  
pp. 70-76
Author(s):  
Dora Sousa ◽  
Sara Biscaia ◽  
Tânia Viana ◽  
Miguel Gaspar ◽  
Vidhura Mahendra ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Additive Manufacturing ◽  
Industrial Applications

Rosins are the non-volatile exudates of pine resins with hydrophobic characteristics that are widely used as a precursor for many industrial applications. In this paper we discuss the nature, process and its applications as a matrix for a composite material for additive manufacturing. The composite material has been tailored to chemical and mechanical properties with respect to their applications.

Curved-layered material extrusion modeling for thin-walled parts by a 5-axis machine

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Xiaojing Feng ◽  
Bin Cui ◽  
Yaxiong Liu ◽  
Lianggang Li ◽  
Xiaojun Shi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Additive Manufacturing ◽  
Layered Material ◽  
Bottom Surface ◽  
Motion Mechanism ◽  
Content Type ◽  
Material Extrusion ◽  
Thin Walled ◽  
Five Axis

Purpose The purpose of this paper is to solve the problems of poor mechanical properties, high surface roughness and waste support materials of thin-walled parts fabricated by flat-layered additive manufacturing process. Design/methodology/approach This paper proposes a curved-layered material extrusion modeling process with a five-axis motion mechanism. This process has advantages of the platform rotating, non-support printing and three-dimensional printing path. First, the authors present a curved-layered algorithm by offsetting the bottom surface into a series of conformal surfaces and a toolpath generation algorithm based on the geodesic distance field in each conformal surface. Second, they introduce a parallel five-axis printing machine consisting of a printing head fixed on a delta-type manipulator and a rotary platform on a spherical parallel machine. Findings Mechanical experiments show the failure force of the five-axis printed samples is 153% higher than that of the three-axis printed samples. Forming experiments show that the surface roughness significantly decreases from 42.09 to 18.31 µm, and in addition, the material consumption reduces by 42.90%. These data indicate the curved-layered algorithm and five-axis motion mechanism in this paper could effectively improve mechanical properties and the surface roughness of thin-walled parts, and realize non-support printing. These methods also have reference value for other additive manufacturing processes. Originality/value Previous researchers mostly focus on printing simple shapes such as arch or “T”-like shape. In contrast, this study sets out to explore the algorithm and benefits of modeling thin-walled parts by a five-axis machine. Several validated models would allow comparability in five-axis printing.

Development and experimental study of an automated laser-foil-printing additive manufacturing system

2022 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Chia-Hung Hung ◽  
Tunay Turk ◽  
M. Hossein Sehhat ◽  
Ming C. Leu
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Additive Manufacturing ◽  
Mechanical Strength ◽  
Automated System ◽  
304L Stainless Steel ◽  
Powder Bed Fusion ◽  
Content Type ◽  
Powder Bed ◽  
Manufacturing Methods

Purpose This paper aims to present the development and experimental study of a fully automated system using a novel laser additive manufacturing technology called laser foil printing (LFP), to fabricate metal parts layer by layer. The mechanical properties of parts fabricated with this novel system are compared with those of comparable methodologies to emphasize the suitability of this process. Design/methodology/approach Test specimens and parts with different geometries were fabricated from 304L stainless steel foil using an automated LFP system. The dimensions of the fabricated parts were measured, and the mechanical properties of the test specimens were characterized in terms of mechanical strength and elongation. Findings The properties of parts fabricated with the automated LFP system were compared with those of parts fabricated with the powder bed fusion additive manufacturing methods. The mechanical strength is higher than those of parts fabricated by the laser powder bed fusion and directed energy deposition technologies. Originality/value To the best knowledge of authors, this is the first time a fully automated LFP system has been developed and the properties of its fabricated parts were compared with other additive manufacturing methods for evaluation.

Effect of post-processing on microstructure and mechanical properties of Alloy 718 fabricated using powder bed fusion additive manufacturing processes

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sareh Götelid ◽  
Taoran Ma ◽  
Christophe Lyphout ◽  
Jesper Vang ◽  
Emil Stålnacke ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Residual Stresses ◽  
Design Methodology ◽  
Hot Isostatic Pressing ◽  
Powder Bed Fusion ◽  
Content Type ◽  
Powder Bed ◽  
Nickel Based Superalloy ◽  
Compressive Stresses

Purpose This study aims to investigate additive manufacturing of nickel-based superalloy IN718 made by powder bed fusion processes: powder bed fusion laser beam (PBF-LB) and powder bed fusion electron beam (PBF-EB). Design/methodology/approach This work has focused on the influence of building methods and post-fabrication processes on the final part properties, including microstructure, surface quality, residual stresses and mechanical properties. Findings PBF-LB produced a much smoother surface. Blasting and shot peening (SP) reduced the roughness even more but did not affect the PBF-EB surface finish as much. As-printed PBF-EB parts have low residual stresses in all directions, whereas it was much higher for PBF-LB. However, heat treatment removed the stresses and SP created compressive stresses for samples from both PBF processes. The standard Arcam process parameter for PBF-EB for IN718 is not fully optimized, which leads to porosity and inferior mechanical properties. However, impact toughness after hot isostatic pressing was surprisingly high. Originality/value The two processes gave different results and also responses to post-treatments, which could be of advantage or disadvantage for different applications. Suggestions for improving the properties of parts produced by each method are presented.

Evaluation of the printing strategies design on the mechanical and tribological response of acrylonitrile styrene acrylate (ASA) additive manufacturing parts

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Juan Manuel Vázquez Martínez ◽  
David Piñero Vega ◽  
Jorge Salguero ◽  
Moises Batista
Keyword(s):  
Additive Manufacturing ◽  
Friction Coefficient ◽  
Wear Rate ◽  
Mechanical Behavior ◽  
Layer Thickness ◽  
Fused Filament Fabrication ◽  
Friction Forces ◽  
Content Type ◽  
Printing Parameters ◽  
Manufacturing Parameters

Purpose The evaluation of novel materials such as the acrylonitrile styrene acrylate (ASA) for tribological and mechanical conditions can provide a structural protection against the environmental and wear effects that results in the long-term integrity of the 3 D printed parts. Results of the experimental stage are intended to identify the influence of the printing conditions on the functional characteristics of ASA parts that results in variations of the friction coefficient, wear rate and tensile response. In addition, this study aims to highlight the relevance of printing parameters to avoid the use of chemical post-processing stages, increasing the performance and sustainability of the process. Design/methodology/approach In this research, an evaluation of the influence of printing parameters of layer thickness and temperature on the mechanical and tribological response have been carried out for ASA specimens manufactured by fused filament fabrication technology. For this purpose, a range of three different values of thickness of fused layer and three different printing temperatures were combined in the manufacturing process of tests samples. Mechanical behavior of the printed parts was evaluated by standard tensile tests, and friction forces were measured by pin-on-disk tribological tests against steel spheres. Findings Higher layer thickness of the printed parts shows lower resistance to tribological wear effects; in terms of friction coefficient and wear rate, this type of parts also presents lower tensile strength. It has been detected that mechanical and tribological behavior is highly related to the micro-geometrical characteristics of the printed surfaces, which can be controlled by the manufacturing parameters. Under this consideration, a reduction in the coefficient of friction near to 65% in the average value was obtained through the variation of the layer thickness of printed surfaces. Originality/value This research aims to fill a gap in the scientific literature about the use of specific additive manufacturing materials under dynamic contact. This paper is mainly focused on the influence of the manufacturing parameters on the tribological and mechanical behavior of a weather resistant polymer (ASA).

scholarly journals Comparing additive manufacturing technologies for customised wrist splints

2015 ◽  
Vol 21 (3) ◽  
pp. 230-243 ◽  
Author(s):  
Abby Megan Paterson ◽  
Richard Bibb ◽  
R. Ian Campbell ◽  
Guy Bingham
Keyword(s):  
Additive Manufacturing ◽  
Upper Extremity ◽  
Digital Design ◽  
Future Research ◽  
Fused Deposition Modelling ◽  
Full Potential ◽  
Content Type ◽  
Fused Deposition ◽  
Am Processes ◽  
Design For Am

Purpose – The purpose of this paper is to compare four different additive manufacturing (AM) processes to assess their suitability in the context of upper extremity splinting. Design/methodology/approach – This paper describes the design characteristics and subsequent fabrication of six different wrist splints using four different AM processes: laser sintering (LS), fused deposition modelling (FDM), stereolithography (SLA) and polyjet material jetting via Objet Connex. The suitability of each process was then compared against competing designs and processes from traditional splinting. The splints were created using a digital design workflow that combined recognised clinical best practice with design for AM principles. Findings – Research concluded that, based on currently available technology, FDM was considered the least suitable AM process for upper extremity splinting. LS, SLA and material jetting show promise for future applications, but further research and development into AM processes, materials and splint design optimisation is required if the full potential is to be realised. Originality/value – Unlike previous work that has applied AM processes to replicate traditional splint designs, the splints described are based on a digital design for AM workflow, incorporating novel features and physical properties not previously possible in clinical splinting. The benefits of AM for customised splint fabrication have been summarised. A range of AM processes have also been evaluated for splinting, exposing the limitations of existing technology, demonstrating novel and advantageous design features and opportunities for future research.

Sign in / Sign up

Export Citation Format

Share Document