Additive manufacturing of mechanochromic polycaprolactone on entry-level systems

2015 ◽  
Vol 21 (5) ◽  
pp. 520-527 ◽  
Author(s):  
Gregory I. Peterson ◽  
Mete Yurtoglu ◽  
Michael B Larsen ◽  
Stephen L. Craig ◽  
Mark A. Ganter ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Smart Materials ◽  
Color Change ◽  
Three Dimensional ◽  
Analytical Techniques ◽  
Force Sensor ◽  
Fused Filament Fabrication ◽  
Content Type ◽  
Entry Level ◽  
Chemical Response

Purpose – This paper aims to explore and demonstrate the ability to integrate entry-level additive manufacturing (AM) techniques with responsive polymers capable of mechanical to chemical energy transduction. This integration signifies the merger of AM and smart materials. Design/methodology/approach – Custom filaments were synthesized comprising covalently incorporated spiropyran moieties. The mechanical activation and chemical response of the spiropyran-containing filaments were demonstrated in materials that were produced via fused filament fabrication techniques. Findings – Custom filaments were successfully produced and printed with complete preservation of the mechanochemical reactivity of the spiropyran units. These smart materials were demonstrated in two key constructs: a center-cracked test specimen and a mechanochromic force sensor. The mechanochromic nature of the filament enables (semi)quantitative assessment of peak loads based on color change, without requiring any external analytical techniques. Originality/value – This paper describes the first examples of three-dimensional-printed mechanophores, which may be of significant interest to the AM community. The ability to control the chemical response to external mechanical forces, in combination with AM to process the bulk materials, potentiates customizability at the molecular and macroscopic length scales.

Effect of 3D printer enabled surface morphology and composition on coral growth in artificial reefs

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ilse Valenzuela Matus ◽  
Jorge Lino Alves ◽  
Joaquim Góis ◽  
Augusto Barata da Rocha ◽  
Rui Neto ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Chemical Composition ◽  
Chemical Elements ◽  
Three Dimensional ◽  
Coral Growth ◽  
Coralline Algae ◽  
Textured Surface ◽  
Crustose Coralline Algae ◽  
Statistical Parameters ◽  
Content Type

Purpose The purpose of this paper is to prove and qualify the influence of textured surface substrates morphology and chemical composition on the growth and propagation of transplanted corals. Use additive manufacturing and silicone moulds for converting three-dimensional samples into limestone mortar with white Portland cement substrates for coral growth. Design/methodology/approach Tiles samples were designed and printed with different geometries and textures inspired by nature marine environment. Commercial coral frag tiles were analysed through scanning electron microscopy (SEM) to identify the main chemical elements. Raw materials and coral species were selected. New base substrates were manufactured and deployed into a closed-circuit aquarium to monitor the coral weekly evolution process and analyse the results obtained. Findings Experimental results provided positive statistical parameters for future implementation tests, concluding that the intensity of textured surface, interfered favourably in the coralline algae biofilm growth. The chemical composition and design of the substrates were determinant factors for successful coral propagation. Recesses and cavities mimic the natural rocks aspect and promoted the presence and interaction of other species that favour the richness of the ecosystem. Originality/value Additive manufacturing provided an innovative method of production for ecology restoration areas, allowing rapid prototyping of substrates with high complexity morphologies, a critical and fundamental attribute to guarantee coral growth and Crustose Coralline Algae. The result of this study showed the feasibility of this approach using three-dimensional printing technologies.

Animal orthosis fabrication with additive manufacturing – a case study of custom orthosis for chicken

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Wiktoria Maria Wojnarowska ◽  
Jakub Najowicz ◽  
Tomasz Piecuch ◽  
Michał Sochacki ◽  
Dawid Pijanka ◽  
...  
Keyword(s):  
Veterinary Medicine ◽  
Additive Manufacturing ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Fused Deposition Modelling ◽  
Content Type ◽  
Fused Deposition ◽  
Secondary Objective ◽  
Traditional Manufacturing ◽  
Aided Design

Purpose Chicken orthoses that cover the ankle joint area are not commercially available. Therefore, the main purpose of this study is to fabricate a customised temporary Ankle–Foot Orthosis (AFO) for a chicken with a twisted ankle using computer-aided design (CAD) and three-dimensional (3D) printing. The secondary objective of the paper is to present the specific application of Additive Manufacturing (AM) in veterinary medicine. Design/methodology/approach The design process was based on multiple sketches, photos and measurements that were provided by the owner of the animal. The 3D model of the orthosis was made with Autodesk Fusion 360, while the prototype was fabricated using fused deposition modelling (FDM). Evaluation of the AFO was performed using the finite element method. Findings The work resulted in a functional 3D printed AFO for chicken. It was found that the orthosis made with AM provides satisfactory stiffen and a good fit. It was concluded that AM is suitable for custom bird AFO fabrication and, in some respects, is superior to traditional manufacturing methods. It was also concluded that the presented procedure can be applied in other veterinary cases and to other animal species and other parts of their body. AM provides veterinary with a powerful tool for the production of well-fitted and durable orthoses for animals. Research limitations/implications The study does not include the chicken's opinion on the comfort or fit of the manufactured AFO due to communication issues. Evaluation of the final prototype was done by the researchers and the animal owner. Originality/value No evidence was found in the literature on the use of AM for chicken orthosis, so this study is the first to describe such an application of AM. In addition, the study demonstrates the value of AM in veterinary medicine, especially in the production of devices such as orthoses.

Fused filament printing of specialized biomedical devices: a state-of-the art review of technological feasibilities with PEEK

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Erfan Rezvani Ghomi ◽  
Saeideh Kholghi Eshkalak ◽  
Sunpreet Singh ◽  
Amutha Chinnappan ◽  
Seeram Ramakrishna ◽  
...  
Keyword(s):  
High Performance ◽  
State Of The Art ◽  
Three Dimensional ◽  
Patient Specific ◽  
Biomedical Devices ◽  
Fused Filament Fabrication ◽  
Content Type ◽  
Patient Specific Implants ◽  
Complex Design ◽  
Wide Range

Purpose The potential implications of the three-dimensional printing (3DP) technology are growing enormously in the various health-care sectors, including surgical planning, manufacturing of patient-specific implants and developing anatomical models. Although a wide range of thermoplastic polymers are available as 3DP feedstock, yet obtaining biocompatible and structurally integrated biomedical devices is still challenging owing to various technical issues. Design/methodology/approach Polyether ether ketone (PEEK) is an organic and biocompatible compound material that is recently being used to fabricate complex design geometries and patient-specific implants through 3DP. However, the thermal and rheological features of PEEK make it difficult to process through the 3DP technologies, for instance, fused filament fabrication. The present review paper presents a state-of-the-art literature review of the 3DP of PEEK for potential biomedical applications. In particular, a special emphasis has been given on the existing technical hurdles and possible technological and processing solutions for improving the printability of PEEK. Findings The reviewed literature highlighted that there exist numerous scientific and technical means which can be adopted for improving the quality features of the 3D-printed PEEK-based biomedical structures. The discussed technological innovations will help the 3DP system to enhance the layer adhesion strength, structural stability, as well as enable the printing of high-performance thermoplastics. Originality/value The content of the present manuscript will motivate young scholars and senior scientists to work in exploring high-performance thermoplastics for 3DP applications.

Design of Three-Dimensional, Triply Periodic Unit Cell Scaffold Structures for Additive Manufacturing

2018 ◽  
Vol 140 (7) ◽  
Author(s):  
Mazher Iqbal Mohammed ◽  
Ian Gibson
Keyword(s):  
Additive Manufacturing ◽  
Periodic Structures ◽  
Three Dimensional ◽  
Unit Cell ◽  
Final Size ◽  
Fused Filament Fabrication ◽  
Cell Structures ◽  
Triply Periodic ◽  
Unit Cells ◽  
Scaffold Structure

Highly organized, porous architectures leverage the true potential of additive manufacturing (AM) as they can simply not be manufactured by any other means. However, their mainstream usage is being hindered by the traditional methodologies of design which are heavily mathematically orientated and do not allow ease of controlling geometrical attributes. In this study, we aim to address these limitations through a more design-driven approach and demonstrate how complex mathematical surfaces, such as triply periodic structures, can be used to generate unit cells and be applied to design scaffold structures in both regular and irregular volumes in addition to hybrid formats. We examine the conversion of several triply periodic mathematical surfaces into unit cell structures and use these to design scaffolds, which are subsequently manufactured using fused filament fabrication (FFF) additive manufacturing. We present techniques to convert these functions from a two-dimensional surface to three-dimensional (3D) unit cell, fine tune the porosity and surface area, and examine the nuances behind conversion into a scaffold structure suitable for 3D printing. It was found that there are constraints in the final size of unit cell that can be suitably translated through a wider structure while still allowing for repeatable printing, which ultimately restricts the attainable porosities and smallest printed feature size. We found this limit to be approximately three times the stated precision of the 3D printer used this study. Ultimately, this work provides guidance to designers/engineers creating porous structures, and findings could be useful in applications such as tissue engineering and product light-weighting.

Effect of system compliance on weld power in ultrasonic additive manufacturing

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Gowtham Venkatraman ◽  
Adam Hehr ◽  
Leon M. Headings ◽  
Marcelo J. Dapino
Keyword(s):  
Additive Manufacturing ◽  
Electrical Power ◽  
Three Dimensional ◽  
Power Input ◽  
Material Strength ◽  
Content Type ◽  
Ultrasonic Additive Manufacturing ◽  
Linear Elastic ◽  
Mechanical Compliance ◽  
The Relationship

Purpose Ultrasonic additive manufacturing (UAM) is a solid-state joining technology used for three-dimensional printing of metal foilstock. The electrical power input to the ultrasonic welder is a key driver of part quality in UAM, but under the same process parameters, it can vary widely for different build geometries and material combinations because of mechanical compliance in the system. This study aims to model the relationship between UAM weld power and system compliance considering the workpiece (geometry and materials) and the fixture on which the build is fabricated. Design/methodology/approach Linear elastic finite element modeling and experimental modal analysis are used to characterize the system’s mechanical compliance, and linear system dynamics theory is used to understand the relationship between weld power and compliance. In-situ measurements of the weld power are presented for various build stiffnesses to compare model predictions with experiments. Findings Weld power in UAM is found to be largely determined by the mechanical compliance of the build and insensitive to foil material strength. Originality/value This is the first research paper to develop a predictive model relating UAM weld power and the mechanical compliance of the build over a range of foil combinations. This model is used to develop a tool to determine the process settings required to achieve a consistent weld power in builds with different stiffnesses.

Fused filament fabrication of continuous optic fiber reinforced polylactic acid composites

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Rui Yan ◽  
Yuye Wang ◽  
Pengjun Luo ◽  
Yangbo Li ◽  
Xiaochun Lu
Keyword(s):  
Polylactic Acid ◽  
Three Dimensional ◽  
Underlying Mechanism ◽  
Uniaxial Tensile ◽  
Optic Fiber ◽  
Fiber Reinforced ◽  
Fused Filament Fabrication ◽  
Engineering Applications ◽  
Content Type ◽  
Axial Tensile

Purpose The limited strength of polylactic acid (PLA) hinders its extensive engineering applications. This paper aims to enhance its strength and realize diverse applications. Design/methodology/approach Here, the continuous fiber reinforced PLA composites are fabricated by a customized fused filament fabrication three-dimensional printer. Uniaxial tensile and three-point flexural tests have been conducted to analyze the reinforcement effect of the proposed composites. To unveil the adhering mechanism of optic fiber (OF) and PLA, post failure analysis including the micro imaging and morphology have been performed. The underlying mechanism is that the axial tensile strength of the OF and the interfacial adhesion between PLA and OF compete to enhance the mechanical properties of the composite. Findings It is found that 10%–20% enhancement of strength, ductility and toughness due to the incorporation of the continuous OF. Originality/value The continuous OFs are put into PLA first time to improve the strength. The fabrication method and process reported here are potentially applied in such engineering applications as aerospace, defense, auto, medicine, etc.

Additive manufacturing of 316L stainless-steel structures using fused filament fabrication technology: mechanical and geometric properties

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Miguel Ángel Caminero ◽  
Ana Romero ◽  
Jesús Miguel Chacón ◽  
Pedro José Núñez ◽  
Eustaquio García-Plaza ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Additive Manufacturing ◽  
Austenitic Stainless Steel ◽  
Material Properties ◽  
Steel Structures ◽  
Fused Filament Fabrication ◽  
Geometric Properties ◽  
Content Type ◽  
Build Orientation ◽  
Manufacturing Alternatives

Purpose Fused filament fabrication (FFF) technique using metal filled filaments in combination with debinding and sintering steps can be a cost-effective alternative for laser-based powder bed fusion processes. The mechanical behaviour of FFF-metal materials is highly dependent on the processing parameters, filament quality and adjusted post-processing steps. In addition, the microstructural material properties and geometric characteristics are inherent to the manufacturing process. The purpose of this study is to characterize the mechanical and geometric performance of three-dimensional (3-D) printed FFF 316 L metal components manufactured by a low-cost desktop 3-D printer. The debinding and sintering processes are carried out using the BASF catalytic debinding process in combination with the BASF 316LX Ultrafuse filament. Special attention is paid on the effects of build orientation and printing strategy of the FFF-based technology on the tensile and geometric performance of the 3-D printed 316 L metal specimens. Design/methodology/approach This study uses a toolset of experimental analysis techniques [metallography and scanning electron microcope (SEM)] to characterize the effect of microstructure and defects on the material properties under tensile testing. Shrinkage and the resulting porosity of the 3-D printed 316 L stainless steel sintered samples are also analysed. The deformation behaviour is investigated for three different build orientations. The tensile test curves are further correlated with the damage surface using SEM images and metallographic sections to present grain deformation during the loading progress. Mechanical properties are directly compared to other works in the field and similar additive manufacturing (AM) and Metal Injection Moulding (MIM) manufacturing alternatives from the literature. Findings It has been shown that the effect of build orientation was of particular significance on the mechanical and geometric performance of FFF-metal 3-D printed samples. In particular, Flat and On-edge samples showed an average increase in tensile performance of 21.7% for the tensile strength, 65.1% for the tensile stiffness and 118.3% for maximum elongation at fracture compared to the Upright samples. Furthermore, it has been able to manufacture near-dense 316 L austenitic stainless steel components using FFF. These properties are comparable to those obtained by other metal conventional processes such as MIM process. Originality/value 316L austenitic stainless steel components using FFF technology with a porosity lower than 2% were successfully manufactured. The presented study provides more information regarding the dependence of the mechanical, microstructural and geometric properties of FFF 316 L components on the build orientation and printing strategy.

scholarly journals Comparative study of the flexural properties of ABS, PLA and a PLA–wood composite manufactured through fused filament fabrication

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
J.A. Travieso-Rodriguez ◽  
R. Jerez-Mesa ◽  
Jordi Llumà ◽  
Giovanni Gomez-Gras ◽  
Oriol Casadesus
Keyword(s):  
Additive Manufacturing ◽  
Acrylonitrile Butadiene Styrene ◽  
Nozzle Diameter ◽  
Bending Test ◽  
Mechanical Resistance ◽  
Fused Filament Fabrication ◽  
Content Type ◽  
Layer Height ◽  
Maximum Deformation ◽  
Materials Used

Purpose The aim of this paper is to analyze the mechanical properties of acrylonitrile-butadiene-styrene (ABS) parts manufactured through fused filament fabrication and compare these results to analogous ones obtained on polylactic acid (PLA) and PLA–wood specimens to contribute for a wider understanding of the different materials used for additive manufacturing. Design/methodology/approach With that aim, an experimental based on an L27 Taguchi array was used to combine the specific parameters taken into account in the study, namely, layer height, nozzle diameter, infill density, orientation and printing velocity. All samples were subjected to a four-point bending test performed according to the ASTM D6272 standard. Findings Young’s modulus, elastic limit, maximum stress and maximum deformation of every sample were computed and subjected to an analysis of variance. Results prove that layer height and nozzle diameter are the most significant factors that affect the mechanical resistance in pieces generated through additive manufacturing and subjected to bending loads, regardless of the material. Practical implications The best results were obtained by combining a layer height of 0.1 mm and a nozzle diameter of 0.6 mm. The comparison of materials evidenced that PLA and its composite version reinforced with wood particles present more rigidity than ABS, whereas the latter can experience further deflection before break. Originality/value This study is of interest for manufacturers that want to decide which is the best material to be applied for their application, as it derives in a practical technical recommendation of the best parameters that should be selected to treat the material during the fused filament fabrication process.

A framework for big data driven process analysis and optimization for additive manufacturing

2019 ◽  
Vol 25 (2) ◽  
pp. 308-321 ◽  
Author(s):  
Arfan Majeed ◽  
Jingxiang Lv ◽  
Tao Peng
Keyword(s):  
Data Mining ◽  
Big Data ◽  
Additive Manufacturing ◽  
Production Efficiency ◽  
Process Analysis ◽  
Three Dimensional ◽  
Big Data Analytics ◽  
Production Performance ◽  
Content Type ◽  
Processing And Storage

Purpose This paper aims to present an overall framework of big data-based analytics to optimize the production performance of additive manufacturing (AM) process. Design/methodology/approach Four components, namely, big data application, big data sensing and acquisition, big data processing and storage, model establishing, data mining and process optimization were presented to comprise the framework. Key technologies including the big data acquisition and integration, big data mining and knowledge sharing mechanism were developed for the big data analytics for AM. Findings The presented framework was demonstrated by an application scenario from a company of three-dimensional printing solutions. The results show that the proposed framework benefited customers, manufacturers, environment and even all aspects of manufacturing phase. Research limitations/implications This study only proposed a framework, and did not include the realization of the algorithm for data analysis, such as association, classification and clustering. Practical implications The proposed framework can be used to optimize the quality, energy consumption and production efficiency of the AM process. Originality/value This paper introduces the concept of big data in the field of AM. The proposed framework can be used to make better decisions based on the big data during manufacturing process.

scholarly journals Increasing strength of FFF three-dimensional printed parts by influencing on temperature-related parameters of the process

2020 ◽  
Vol 26 (1) ◽  
pp. 107-121 ◽  
Author(s):  
Vladimir E. Kuznetsov ◽  
Alexey N. Solonin ◽  
Azamat Tavitov ◽  
Oleg Urzhumtsev ◽  
Anna Vakulik
Keyword(s):  
Bulk Material ◽  
Three Dimensional ◽  
Fracture Load ◽  
Bending Test ◽  
Material Strength ◽  
Thermal Imager ◽  
Fused Filament Fabrication ◽  
Content Type ◽  
Temperature Conditions ◽  
Two Factors

Purpose This paper aims to investigate how the user-controlled parameters of the fused filament fabrication three-dimensional printing process define temperature conditions on the boundary between layers of the part being fabricated and how these conditions influence the structure and strength of the polylactic acid part. Design/methodology/approach Fracture load in a three-point bending test and calculated related stress were used as a measure. The samples were printed with the long side along the z-axis, thus, in the bend tests, the maximum stress occurred orthogonally to the layers. Temperature distribution on the sample surface during printing was monitored with a thermal imager. Sample mesostructure was analyzed using scanning electron microscopy. The influence of the extrusion temperature, the intensity of part cooling, the printing speed and the time between printing individual layers were considered. Findings It is shown that the optimization of the process parameters responsible for temperature conditions makes it possible to approximate the strength of the interlayer cohesion to the bulk material strength. Originality/value The novelty of the study consists in the generalization of the outcomes. All the parameters varied can be expressed through two factors, namely, the temperature of the previous layer and the extrusion efficiency, determining the ratio of the amount of extruded plastic to the calculated. A regression model was proposed that describes the effect of the two factors on the printed part strength. Along with interlayer bonding strength, these two factors determine the formation of the part mesostructure (the geometry of the boundaries between individual threads).

Sign in / Sign up

Export Citation Format

Share Document