Study on the effect of semisolid lubricants on tribological properties of hardened steel during boring process

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Lawrance G. ◽  
P. Sam Paul ◽  
Varadarajan A.S.
Keyword(s):  
Surface Roughness ◽  
Cutting Force ◽  
Tribological Properties ◽  
Cutting Temperature ◽  
Aluminium Oxide ◽  
Cutting Fluids ◽  
Tool Vibration ◽  
Content Type ◽  
Vibration Cutting ◽  
Cutting Zone

Purpose In the internal turning process, tool life and work piece quality are greatly influenced by the generation of heat in the cutting zone. During machining, cutting fluids are applied at the cutting zones to reduce heat generation and enhance tribological properties. However, in the boring process, cutting fluids cannot be applied at cutting zone properly, and wastage of cutting fluid is a threat to the ecology and personnel health. Hence, application of semisolid lubricant in the boring process is considered as an innovative technique for temperature reduction in cutting zone because of its eco-friendly system, which also has a higher ability of biodegradability. This paper aims to study the influence of semisolid lubricants comprising of grease,graphite, aluminium oxide in different composition applied at a tool–chip,tool–work interface using a semisolid lubricant applicator applied with varying pressure. Design/methodology/approach In the present study, the cutting performance during boring of AISI4340 steel is enhanced through the application of semisolid lubricant with different composition of grease, graphite and aluminium oxide applied at tool-work and tool-chip interface with varying pressure using semisolid lubricant applicator. Findings The results show that use of semisolid lubricant like grease, graphite and nano aluminium oxide at tool-chip interface with maximum pressure reduces cutting temperature, tool vibration, cutting force and surface roughness. Originality/value Reduce cutting temperature, tool vibration, cutting force and surface roughness.

Effects of Liquid Nitrogen on Cryogenic Machining of Aisi D2 Hardened Steel

2011 ◽  
Vol 335-336 ◽  
pp. 400-405
Author(s):  
Samraj Ravi ◽  
Murugasan Pradeep Kumar
Keyword(s):  
Surface Roughness ◽  
Cutting Force ◽  
Liquid Nitrogen ◽  
Cutting Temperature ◽  
Hardened Steel ◽  
Cryogenic Machining ◽  
Workpiece Surface ◽  
Aisi D2 ◽  
Cutting Zone ◽  
Coated Carbide

The milling of hardened steel generates very high temperature in the cutting zone, and leads to detrimental effects on the cutting force, workpiece surface finish and tool life. Cryogenic machining is an environmental friendly new approach for the desirable control of the cutting temperature in the cutting zone. The present work investigates the effect of cryogenic cooling by liquid nitrogen (LN2) on the cutting temperature, cutting force and workpiece surface roughness on the end milling of AISI D2 steel by CVD TiN coated carbide insert, at a constant cutting speed of 100 m/min and varying feed rate in the range of 0.01-0.02 mm/tooth. The experimental results showed that with LN2 as a coolant the cutting force and workpiece surface roughness were reduced compared to dry and wet machining due to the better lubrication and cooling effect through reduction of cutting zone temperature.

scholarly journals Influence of Ultrasonic Vibration-Assisted Ball-End Milling on the Cutting Performance of AZ31B Magnesium Alloy

2020 ◽  
Vol 9 (4) ◽  
pp. 271-276
Keyword(s):  
Surface Roughness ◽  
Cutting Force ◽  
Ultrasonic Vibration ◽  
Biomedical Applications ◽  
End Milling ◽  
Cutting Temperature ◽  
Cutting Performance ◽  
Machining Process ◽  
Dry Conditions ◽  
Good Biocompatibility

Magnesium alloys have a tremendous possibility for biomedical applications due to their good biocompatibility, integrity and degradability, but their low ignition temperature and easy corrosive property restrict the machining process for potential biomedical applications. In this research, ultrasonic vibration-assisted ball milling (UVABM) for AZ31B is investigated to improve the cutting performance and get specific surface morphology in dry conditions. Cutting force and cutting temperatures are measured during UVABM. Surface roughness is measured with a white light interferometer after UVABM. The experimental results show cutting force and cutting temperature reduce due to ultrasonic vibration, and surface roughness decreases by 34.92%, compared with that got from traditional milling, which indicates UVABM is suitable to process AZ31B for potential biomedical applications.

Influence of flow parameters in the dual nozzle CO2-based vortex tube cooling system during turning of Ti-6Al-4V

2021 ◽  
pp. 095440622110574
Author(s):  
Khirod Mahapatro ◽  
P Vamsi Krishna
Keyword(s):  
Surface Roughness ◽  
Cutting Force ◽  
Vortex Tube ◽  
Cooling System ◽  
Cutting Temperature ◽  
Nozzle Diameter ◽  
Energy Separation ◽  
Optimum Conditions ◽  
Dry Cutting ◽  
Input Variables

Dual nozzle vortex tube cooling system (VTCS) is developed to improve the machinability of Ti-6Al-4V where cold-compressed CO2 gas is used as a coolant. The cooling effect is produced by the process of energy separation in the vortex tube and the coolant is supplied into the machining zone to remove the generated heat in machining. In this study, the responses such as cutting force (Fz), cutting temperature (Tm), and surface roughness (Ra) are analyzed by considering coolant inlet pressure, cold fraction, and nozzle diameter as input variables. Further optimization is performed for the input variables using the genetic algorithm technique, and the results at optimum conditions are compared with those of dry cutting. From the results, lower cutting force is observed at lower coolant pressure and cold fraction and higher nozzle diameter. The cutting temperature is minimized by increasing coolant pressure and cold fraction and by decreasing nozzle diameter. A better surface finish is observed at high coolant pressure and cold fraction and lower nozzle diameters. It is observed from the response surface method (RSM) that the coolant pressure is most significantly affecting all the responses. At optimum conditions, the cutting temperature and surface roughness are 35.6% and 66.14%, respectively, lower than dry cutting due to the effective cooling and lubricating action of the CO2 gas, whereas cutting force observed under the VTCS is 18.6% higher than that of dry cutting because of the impulse force of the coolant VTCS and thermal softening of the workpiece in dry cutting.

EFFECT OF CUTTING PARAMETERS ON CUTTING ZONE IN CRYOGENIC HIGH SPEED MILLING OF INCONEL 718 ALLOY

2015 ◽  
Vol 77 (27) ◽  
Author(s):  
A. H. Musfirah ◽  
J. A. Ghani ◽  
C. H. Che Haron ◽  
M. S. Kasim
Keyword(s):  
Surface Roughness ◽  
Inconel 718 ◽  
End Milling ◽  
Cutting Temperature ◽  
Cryogenic Cooling ◽  
Cutting Condition ◽  
Dry Machining ◽  
Part Quality ◽  
Cutting Zone ◽  
Coated Carbide

In tribology phenomenon, surface roughness has become one of the most important factors that contributed to the evaluation of part quality during machining operation. In order to understand the behavior of cryogenic cooling assistance in machining Inconel 718, this paper aims to provide better understanding of tribological characterization of liquid nitrogen near the cutting zone of this material in ball end milling process. Experiments were performed using a multi-layer TiAlN/AlCrN-coated carbide inserts under cryogenic and dry cutting condition. A transient milling simulation model using Third Wave Advantedge has been done in order to gain in-depth understanding of the thermomechanical aspects of machining and their influence on resulted part quality. The cryogenic results of the cutting temperature, cutting forces and surface roughness of the ball nose cutting tool have been compared with those of dry machining. Finally, experimental results proved that cryogenic implementation can  decrease the amount of heat transferred to the tool up to almost 70% and improve the surface roughness to a maximum of 31% when compared with dry machining. Furthermore, the microstructure of machined workpiece revealed that cryogenic cooling also can reduce a plastic deformation at the cutting surface as compared with the dry machining. 

scholarly journals Experimental Study on a “Snake-Type” Vibration Cutting Method for Cutting Force and Cutting Heat Reductions

Biomimetics ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 57 ◽  
Author(s):  
Xiangyu Zhang ◽  
Zhenlong Peng ◽  
Deyuan Zhang
Keyword(s):  
Cutting Force ◽  
Surface Integrity ◽  
Cutting Temperature ◽  
Target Surface ◽  
Ultrasonic Frequency ◽  
Heat Accumulation ◽  
Cutting Method ◽  
Vibration Cutting ◽  
Residual Stress State ◽  
Cutting Heat

Cutting is the foundation of manufacturing in industry. The main cutting objects include metals, ceramics, glasses, compositions, and even biological materials such as tissues and bones. The special properties of each material such as hardness, ductility, brittleness, and heat conductivity lead to either a large cutting force or a high cutting temperature. Both of these factors result in poor machinability due to rapid tool wear or break or unsatisfactory surface integrity of the material finishing surface using the conventional cutting (CC, conventional cutting) types. In nature, snakes have their own way of reducing heat accumulation on their body when moving on the hot desert surface. They move forward along an “S”-type path, so that the bottom of their body separates from the desert intermittently. In this way, the separation interval both reduces the cutting heat accumulations and effectively achieves cooling by allowing the air to go through. In addition, the acceleration of Odontomachus monticola’s two mandibles when striking a target can reach 71,730 g m/s2 within 180 ms, which can easily break the target surface by the transient huge impact. Therefore, based on a snake’s motion on the desert surface and Odontomachus monticola’s striking on the target surface, respectively, an ultrasonic-frequency intermittent cutting method, also called “snake-type” vibration cutting (SVC, snake-type vibration cutting), was proposed in this study. First, its bionic kinematics were analyzed, then the SVC system’s design was introduced. Finally, cutting experiments were conducted on a common and typical difficult-to-cut material, namely titanium alloys. Cutting force, cutting temperature, and the surface integrity of the material finishing surface were measured, respectively. The results demonstrated that, compared to conventional cutting methods, SVC achieved a maximum of 50% and 30% reductions of cutting force and cutting temperature, respectively. Moreover, the surface integrity was improved both in surface roughness and residual stress state.

Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters

2009 ◽  
Vol 407-408 ◽  
pp. 608-611 ◽  
Author(s):  
Chang Yi Liu ◽  
Cheng Long Chu ◽  
Wen Hui Zhou ◽  
Jun Jie Yi
Keyword(s):  
Surface Roughness ◽  
Cutting Force ◽  
Feed Rate ◽  
High Speed ◽  
Cutting Temperature ◽  
Cutting Speed ◽  
Flank Milling ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Mill Machining

Taguchi design methodology is applied to experiments of flank mill machining parameters of titanium alloy TC11 (Ti6.5A13.5Mo2Zr0.35Si) in conventional and high speed regimes. This study includes three factors, cutting speed, feed rate and depth of cut, about two types of tools. Experimental runs are conducted using an orthogonal array of L9(33), with measurement of cutting force, cutting temperature and surface roughness. The analysis of result shows that the factors combination for good surface roughness, low cutting temperature and low resultant cutting force are high cutting speed, low feed rate and low depth of cut.

Cutting Parameters Optimization of Mild Steel via AIS Heuristics Algorithm

2015 ◽  
Vol 761 ◽  
pp. 132-136
Author(s):  
Adnan Jameel Abbas ◽  
Mohammad Minhat ◽  
Md Nizam Abd Rahman
Keyword(s):  
Surface Roughness ◽  
Mild Steel ◽  
Feed Rate ◽  
Cutting Tool ◽  
Cutting Temperature ◽  
Cutting Parameters ◽  
Optimum Cutting ◽  
Cutting Velocity ◽  
Cutting Zone ◽  
The Ideal

. The minimum cost and high productivity of the recent industrial renaissance are its main challengers. Selecting the optimum cutting parameters play a significant role in achieving these aims. Heat generated in the cutting zone area is an important factor affecting workpiece and cutting tool properties. The surface finish quality specifies product success and integrity. In this paper, the temperature generated in the cutting zone (shear zone and chip-tool interface zone) and workpiece surface roughness is optimized using an artificial immune system (AIS) intelligent algorithm. A mild steel type (S45C) workpiece and a tungsten insert cutting tool type (SPG 422) is subjected to dry CNC turning operation are used in experiments. Optimum cutting parameters (cutting velocity, depth of cut, and feed rate) calculated by the (AIS) algorithm are used to obtain the simulated and ideal cutting temperature and surface roughness. An infrared camera type (Flir E60) is used for temperature measurement, and a portable surface roughness device is used for roughness measurement. Experimental results show that the ideal cutting temperature (110°C) and surface roughness (0.49 μm) occur at (0.3 mm) cut depth, (0.06 mm) feed rate, and (60 m/min) cutting velocity. The AIS accuracy rates in finding the ideal cutting temperature and surface roughness are (91.70 %) and (90.37 %) respectively. Analysis shows that the predicted results are close to the experimental ones, indicating that this intelligent system can be used to estimate cutting temperature and surface roughness during the turning operation of mild steel.

Cutting Behavior of Self-Lubricating Ceramic Tool in Dry Machining of 40Cr Quenched Steel

2021 ◽  
Vol 871 ◽  
pp. 176-188
Author(s):  
Ben Yuan Wang ◽  
Guang Chun Xiao ◽  
Zhao Qiang Chen ◽  
Ming Dong Yi ◽  
Jing Jie Zhang ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Friction Coefficient ◽  
Cutting Force ◽  
Solid Lubricant ◽  
Cutting Temperature ◽  
Cutting Parameters ◽  
Ceramic Composites ◽  
Ceramic Tool ◽  
Cutting Depth ◽  
Ceramic Tools

In this paper, the dry cutting performance of Al2O3/TiC-based ceramic composites with nanoCaF2 was studied. Compared with the Al2O3/TiC ceramic tool, the Al2O3/TiC/CaF2 ceramic tool has lower cutting force, cutting temperature and surface roughness when milling 40Cr hardened steel. Three cutting parameters of cutting speed, feed per tooth, and cutting depth were used to conduct orthogonal experiments to study its changing trend. Through testing of cutting force, cutting temperature and surface roughness, and by comparison with ceramic tools without nanosolid lubricant added, the order of influence of three cutting parameters on cutting force, cutting temperature and surface roughness was obtained. The experimental results showed that the cutting force, cutting temperature and surface roughness of Al2O3/TiC/CaF2 ceramic tools containing nanoCaF2 werebetter than those of Al2O3/TiC ceramic tools. The cutting force, the cutting temperature, and the surface roughness were respectively reduced by 16.5%, 25.8% and 43% compared to when no solid lubricant was added. In addition, after adding solid lubricant, the effect of cutting depth on cutting force was significantly reduced. The average friction coefficient of the tool rake surface was 31.1% lower than that of ceramic tools without solid lubricant. In order to explain this phenomenon, through scanning electron microscopy (SEM) scanning and energy spectroscopy (EDS) elemental analysis, the wear reduction mechanism of solid lubricants was analyzed, that is, during the cutting process, nanosolid lubricants precipitated and formed lubricating film on the rake surface of the tool to reduce the friction coefficient. This was also the main reason for reducing the cutting temperature.

Sign in / Sign up

Export Citation Format

Share Document