Reverse Recovery in High Density Trench MOSFETs with Regard to the Body-Effect

2006 ◽  
Author(s):  
T. Lopez ◽  
R. Elferich ◽  
N. Koper
Keyword(s):  
High Density ◽  
The Body ◽  
Body Effect

Surface ultrastructure of juvenile and adult stages of Centrocestus armatus

1998 ◽  
Vol 72 (3) ◽  
pp. 215-219 ◽  
Author(s):  
Ho-Choon Woo ◽  
Myung-Deuk Seo ◽  
Sung-Jong Hong
Keyword(s):  
Oral Sucker ◽  
Body Surface ◽  
Dorsal Surface ◽  
High Density ◽  
The Body ◽  
Albino Rats ◽  
Entire Body ◽  
Type Ii ◽  
Posterior Half ◽  
Surface Ultrastructure

AbstractCentrocestus armatus (Trematoda: Heterophyidae) develops rapidly and produces eggs at 3 days postinfection in albino rats. Excysted metacercariae are pear-shaped and concave ventrally, with 42–44 peg-like circumoral spines. The entire body surface is densely covered with scale-like serrated spines. On juveniles, serration of the tegumental spines is greatest in the middle of the ventral and dorsal surfaces, and decreases anteriorly and posteriorly. Ciliated sensory papillae are concentrated around the oral sucker. Several nonciliated sensory papillae (type II papillae) occur equidistantly on the acetabulum and are arranged in a linear symmetry on the dorsal surface. On adults, the serration of the tegumental spines decreases to 14–17 tips on the ventrolateral surface. The high density of tegumental spines on posterior half of the body and the distribution of type II papillae on dorsal surface are considered to be characteristic of C. armatus.

scholarly journals Investigation of the significance of the 'body effect' on sensitivity to metallic objects in a walk-through metal detector

2013 ◽  
Vol 450 ◽  
pp. 012037 ◽  
Author(s):  
L A Marsh ◽  
J Makkonen ◽  
J Vihonen ◽  
A Visa ◽  
A Järvi ◽  
...  
Keyword(s):  
The Body ◽  
Metal Detector ◽  
Body Effect

2.2–4.6-GHz Active Quasi-Circulator with > 24-dB Transmit–Receive Isolation

2019 ◽  
Vol 29 (05) ◽  
pp. 2050077
Author(s):  
Najam Muhammad Amin ◽  
Lianfeng Shen ◽  
Danish Kaleem ◽  
Zhi-Gong Wang ◽  
Keping Wang ◽  
...  
Keyword(s):  
Integrated Circuit ◽  
The Body ◽  
Common Source ◽  
Cmos Process ◽  
Secondary Effects ◽  
Body Effect ◽  
Chip Area ◽  
Common Gate ◽  
Loading Effects ◽  
Better Than

An active quasi-circulator (AQC) integrated circuit is designed and fabricated in a 0.18-[Formula: see text]m CMOS process. The proposed design is based on a parallel combination of a common-source (CS) stage and a combined common-drain (CD) and common-gate (CG) topology. Scattering matrix of the core AQC circuit is derived considering MOSFET’s secondary effects, particularly the body effect as well as output loading effects. Measurements of the quasi-circulator reveal an insertion loss of [Formula: see text] dB between transmitter-to-antenna ports ([Formula: see text]) and of [Formula: see text] dB between antenna-to-receiver ports ([Formula: see text]), within a frequency band of 2.2–4.6 GHz. The isolation between the transmitter and the receiver ports ([Formula: see text]) is better than 24 dB with a maximum value of 29.5[Formula: see text]dB @ 3.6[Formula: see text]GHz. The power dissipation of the proposed AQC is 40[Formula: see text]mW and it covers an active chip area of 0.677[Formula: see text]mm2.

scholarly journals Hand, foot and lip representations in primary sensorimotor cortex: a high-density electroencephalography study

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Mingqi Zhao ◽  
Marco Marino ◽  
Jessica Samogin ◽  
Stephan P. Swinnen ◽  
Dante Mantini
Keyword(s):  
Sensorimotor Cortex ◽  
High Spatial Resolution ◽  
Movement Control ◽  
Contralateral Side ◽  
High Density ◽  
The Body ◽  
Body Parts ◽  
Gamma Frequency ◽  
Neural Processes ◽  
Primary Sensorimotor Cortex

AbstractThe primary sensorimotor cortex plays a major role in the execution of movements of the contralateral side of the body. The topographic representation of different body parts within this brain region is commonly investigated through functional magnetic resonance imaging (fMRI). However, fMRI does not provide direct information about neuronal activity. In this study, we used high-density electroencephalography (hdEEG) to map the representations of hand, foot, and lip movements in the primary sensorimotor cortex, and to study their neural signatures. Specifically, we assessed the event-related desynchronization (ERD) in the cortical space. We found that the performance of hand, foot, and lip movements elicited an ERD in beta and gamma frequency bands. The primary regions showing significant beta- and gamma-band ERD for hand and foot movements, respectively, were consistent with previously reported using fMRI. We observed relatively weaker ERD for lip movements, which may be explained by the fact that less fine movement control was required. Overall, our study demonstrated that ERD based on hdEEG data can support the study of motor-related neural processes, with relatively high spatial resolution. An interesting avenue may be the use of hdEEG for deeper investigations into the pathophysiology of neuromotor disorders.

Geomorphological mapping of an alpine rock glacier with multi-temporal UAV-based high density point cloud comparison

2020 ◽  
Author(s):  
Francesca Bearzot ◽  
Roberto Garzonio ◽  
Biagio Di Mauro ◽  
Umberto Morra Di Cella ◽  
Edoardo Cremonese ◽  
...  
Keyword(s):  
Surface Displacement ◽  
Point Clouds ◽  
Horizontal Displacement ◽  
Multiscale Model ◽  
Climatic Conditions ◽  
High Density ◽  
The Body ◽  
Density Point ◽  
Differential Gps ◽  
Rock Glacier

<p>The acquisition of high-resolution topographic data is a widely used tool for studies related to the processes and dynamics of the Earth's surface. In this work, we present the results of the repeated acquisition of photogrammetric data by Unmanned Aerial Vehicle (UAV) in order to detect the topographic evolution of an alpine rock glaciers located in Valtournenche (AO, Italy). Field monitoring conducted in recent years has shown significant variations in the behaviour of these landforms, with an increasing trend of their dynamism, raising questions about their stability in changing climatic conditions.</p><p> </p><p>The photogrammetric shots were taken with a DJ Phantom 4 UAV equipped with a compact RGB digital camera. The acquisitions were performed yearly from 2012 up to 2019 with a ground sampling distance never exceeding 5 cm/px. Contemporary to the acquisitions, approximately 20 Ground Control Points were placed on the rock glacier and on the surrounding areas and their coordinates were measured with a differential GPS (dGPS) for georeferencing UAV images. Moreover, in 2014, 2015 and 2019 geophysical campaigns were carried out for the detection of ice lenses under the debris cover of the rock glacier.</p><p> </p><p>Structure-from-motion techniques were applied on overlapping images to create high-density point clouds, than converted in orthophotos and digital surface models of the Earth’s surface.</p><p>The point clouds were analysed using the M3C2 (Multiscale Model to Model Cloud Comparison) plug-in, freely available in the CloudCompare software. Maps of surface changes between acquisition pairs in the period from 2015-2019 have been created. The comparison allowed the identification of "material supply" and "material removal" zones, slightly variable from one year to the next. The major accumulation zones are concentrated along the frontal sector of the rock glacier, more focused on the western sector (black lobe) and secondly on the right side of the rock glacier (white lobe). The removal of material is mainly concentrated on the higher altitude of the body but also in correspondence to the systems of crevasses and scarps and on the central part of the black lobe.</p><p>The surface displacement analysis of the rock glacier was also performed selecting manually several clearly identifiable features on the orthomosaics collected. Blocks and ridges-and-furrows complex were marked on the 2019 orthomosaic and found them on the 2015 orthomosaic. This approach allows improving and quantifying the dynamics of the different portions of the individual apparatus.</p><p>The velocity fields’ patterns highlight non-homogeneous displacements between the West (black lobe) and East part (white lobe) of the whole rock glacier. Specifically, the black lobe showed an average horizontal displacement of around 1 m/y while the white lobe moved significantly slower than the previous one (approximately 0.5 m/y). Overall, the rock glacier moved downslope at an average horizontal velocity of 0.60 m/y in the frontal tongue, 0.48 m/y in the central portion and 0.30 m/y in the upper zone.</p>

Extraction of Effective Oxide Thickness for SOI FINFETs With High- $\kappa$/Metal Gates Using the Body Effect

2010 ◽  
Vol 31 (7) ◽  
pp. 650-652 ◽  
Author(s):  
Sujata Paul ◽  
Frank Yeh ◽  
Kingsuk Maitra ◽  
Chung-Hsun Lin ◽  
Andreas Kerber ◽  
...  
Keyword(s):  
Oxide Thickness ◽  
The Body ◽  
Body Effect ◽  
Metal Gates

THE WING-BODY AEROELASTIC ANALYSES USING THE INVERSE DESIGN METHOD

2010 ◽  
Vol 24 (13) ◽  
pp. 1479-1482
Author(s):  
SEUNG JUN LEE ◽  
DONG-KYUN IM ◽  
IN LEE ◽  
JANG-HYUK KWON
Keyword(s):  
Design Method ◽  
The Body ◽  
Inverse Design ◽  
Navier Stokes ◽  
Full Potential ◽  
Small Disturbance ◽  
Body Effect ◽  
Flow Equations ◽  
Applicable Range ◽  
Inverse Design Method

Flutter phenomenon is one of the most dangerous problems in aeroelasticity. When it occurs, the aircraft structure can fail in a few second. In recent aeroelastic research, computational fluid dynamics (CFD) techniques become important means to predict the aeroelastic unstable responses accurately. Among various flow equations like Navier-Stokes, Euler, full potential and so forth, the transonic small disturbance (TSD) theory is widely recognized as one of the most efficient theories. However, the small disturbance assumption limits the applicable range of the TSD theory to the thin wings. For a missile which usually has small aspect ratio wings, the influence of body aerodynamics on the wing surface may be significant. Thus, the flutter stability including the body effect should be verified. In this research an inverse design method is used to complement the aerodynamic deficiency derived from the fuselage. MGM (modified Garabedian-McFadden) inverse design method is used to optimize the aerodynamic field of a full aircraft model. Furthermore, the present TSD aeroelastic analyses do not require the grid regeneration process. The MGM inverse design method converges faster than other conventional aerodynamic theories. Consequently, the inverse designed aeroelastic analyses show that the flutter stability has been lowered by the body effect.

Research on microstructure and mechanical behaviour of smaller microbumps for high density solder interconnects

2017 ◽  
Vol 29 (3) ◽  
pp. 156-163
Author(s):  
Man He ◽  
Bo Wang ◽  
Weisheng Xia ◽  
Shijie Chen ◽  
Jinzhuan Zhu
Keyword(s):  
Mechanical Behaviour ◽  
Bulk Solder ◽  
High Density ◽  
The Body ◽  
Nanoindentation Test ◽  
Metallographic Analysis ◽  
Content Type ◽  
Solder Interconnects ◽  
Free Replacement ◽  
The One

Purpose The purpose of this paper is to study the microstructure and mechanical behaviour of smaller microbumps for high density solder interconnects. Design/methodology/approach The microstructure was analyzed by scanning electron microscopy and electron backscatter diffraction tests to determine the Sn grain number of the resultant microbumps. The nanomechanical properties of Sn microbumps were investigated by the nanoindentation and shearing tests to understand the failure mechanism and assess the reliability of ultra-high density solder interconnects with numbered grains. Findings Only one Sn grain is observed in the interconnect matrix when the microbumps are miniaturized to 40 μm or less. Because of the body-centred tetragonal lattice of ß-Sn unit cell, the mechanical properties of the one-grain Sn microbumps are remarkably anisotropic, which are proved by the difference of the elastic modulus and the stiffness in the different orientations. The shearing tests show that the one-grain Sn microbump has a typical brittle sliding fracture of monocrystal at different shearing speeds. Practical implications The paper provides a comparable study for the performance of the bigger solder joints and also makes preliminary research on the microstructure and mechanical behaviour of Sn microbumps with the diameter of 40 μm. Originality/value The findings in this paper provide methods of microstructure study by combination of EBSD test and metallographic analysis, mechanical study by combination of nanoindentation test and shearing test, which can provide good guidelines for other smaller microbumps. The strain rate sensitivity exponent of the one-grain Sn microbumps is consistent with the Pb-free bulk solder. This implies that the one-grain Sn microbump has a comparable flow stress to Sn37Pb solder, which is beneficial for Pb-free replacement in higher density microelectronic packaging.

Sign in / Sign up

Export Citation Format

Share Document