scholarly journals 3D-Printed Ophthalmic Retrobulbar Anesthesia Simulator: Mimicking Anatomical Structures and Providing Tactile Sensations

Author(s):  
Yong Je Choi ◽  
Yoon Ha Joo ◽  
Baek Lok Oh ◽  
Jung Chan Lee
Author(s):  
T. M. Amulya ◽  
K. G. Siree ◽  
T. M. Pramod Kumar ◽  
M. B. Bharathi ◽  
K. Divith ◽  
...  

The scope and applications of biomaterials have spread out throughout a broad spectrum. Particularly in pharmacy, biomaterials are an attractive choice because they can be modified to decrease toxicity, increase the targeting ability among many other aspects of drug delivery. Extensive studies have led to the development of many metal-based, ceramic, biocompatible and biodegradable biomaterials for medical purposes among many others. The utilization of 3D printing in this discipline is a very novel research subject with infinite potential. Personalized and customized nasal implants are a great option to increase patient compliance and 3D printed accurate anatomical structures are rendered to be effective tools of learning. One of the disadvantages of biomaterial-based implants is the formation of a thick fibrous capsule formation around the implant, others being breakage, soft tissue loss and so on. Regulatory aspects are less explored for nasal implants. 3D printing is a unique technique that allows for a high degree of customisation in pharmacy, dentistry and in designing of medical devices. Current research in 3D printing indicates towards reproducing an organ in the form of a chip; paving the way for more studies and opportunities to perfecting the existing technique.


Author(s):  
Xingjian Wei ◽  
Li Zeng ◽  
Zhijian Pei

Medical models are physical models of human or animal anatomical structures such as skull and heart. Such models are used in simulation and planning of complex surgeries. They can also be utilized for anatomy teaching in medical curriculum. Traditionally, medical models are fabricated by paraffin wax or silicone casting. However, this method is time-consuming, of low quality, and not suitable for personalization. Recently, 3D printing technologies are used to fabricate medical models. Various applications of 3D printed medical models in surgeries and anatomy teaching have been reported, and their advantages over traditional medical models have been well-documented. However, 3D printing of medical models bears some special challenges compared to industrial applications of 3D printing. This paper reviews more than 50 publications on 3D printing of medical models between 2006 and 2016, and discusses knowledge gaps and potential research directions in this field.


2020 ◽  
Vol 10 (4) ◽  
pp. 1325
Author(s):  
Bo-Yeon Hwang ◽  
Jae-Yeol Lee ◽  
Junho Jung ◽  
Joo-Young Ohe ◽  
Young-Gyu Eun ◽  
...  

This study aimed to present and evaluate alternative lesion-specific mandibulectomy methods for preserving the mandibular anatomical structures as compared with the conventional virtual surgical plan. Fifteen patients who received segmental mandibulectomy were included in this study, and the following parameters were evaluated: (1) the disease-free bone margin, (2) the volume and surface between the tailor-made resection simulation and conventional resection simulation, and (3) the preserved mandibular anatomical structures. In all 15 patients, disease-free bone margins were confirmed by histopathology. Volumes of conventional resection simulation and tail-made resection simulation were 49,468.66 ± 14,007.96 mm3 and 52,610.01 ± 13,755.33 mm3 and the surfaces were 20,927.38 ± 4471.70 mm2 and 22,356.49 ± 4185.73 mm2, respectively; these were statistically significant (both, p < 0.001). Mandibular dentition was partially preserved in six patients. Twelve of the 15 patients had changes in defect classification with preservation of the mandibular inferior border. In conclusion, alternative lesion-specific mandibulectomy was a less invasive method for effectively removing mandibular lesions while preserving the important anatomical structures of the mandible.


Author(s):  
Sriram Sankar ◽  
Jithu Paulose ◽  
Nirmal Thomas

A cast is used to encase a limb or part of the body to stabilize and hold anatomical structures in place to allow healing of broken bones and ligament tears by promoting immobilization. Conventional orthopedic casts have been made out of Plaster of Paris or fiberglass since ages. The traditional plaster casts have a wide range of problems that have been long since evaded due to the lack of a better alternative. Ever since the advent of additive manufacturing, many remarkable things have been made possible by the technology of 3D printing. The Exoskeletal Immobilizer is a custom 3D printed orthopedic cast that is well ventilated, light weighted, aesthetically pleasing and anatomically accurate. Even though printing the immobilizer on spot takes a little longer than the conventional cast, its countless benefits make up for the waiting time. It is extremely logical and useful for the ones suffering from cerebral palsy, who are forced to wear casts for their entire life. This project is not just another profit making business idea but is the cornerstone that is being laid to serve the people better and lead humanity into the next phase of medical advancement. By integrating parts of physiotherapy, eastern medicine, orthopedics and latest technologies, the Immobilizer promises a speedy recovery. The possibility of performing ultrasound therapy, electrical stimulation therapy, chromotherapy, cryotherapy and acupuncture therapy during the immobilization period reduces the healing time at least by about 40% [4] and eases discomfort of the patients. The features imparted to the cast have been specially handpicked and researched to provide a safe overlap of post immobilization treatment and the immobilization period to facilitate faster healing. The Exoskeletal Immobilizer can not only heal the fracture or a tear faster but can also keep the patient comfortable during the treatment.


Medicina ◽  
2020 ◽  
Vol 56 (9) ◽  
pp. 458 ◽  
Author(s):  
Ladislav Czako ◽  
Kristian Simko ◽  
Andrej Thurzo ◽  
Branislav Galis ◽  
Ivan Varga

Background and Objectives: The symptoms of Eagle’s syndrome are associated with the elongated styloid process of the temporal bone or calcification of the stylohyoid ligament. The first mention of pain syndrome associated with the elongated styloid process dates back to 1937, when it was described by Watt Weems Eagle. Over the last decade, experts in the field have shown a lively interest in the issue of the relationship between the elongated styloid process and various symptoms. This article presents the correlation between the clinical signs of Eagle’s syndrome and alterations in surrounding anatomical structures. It includes a brief review of the evolutionary, embryological and clinical anatomical background of the elongated styloid process. Materials and Methods: Between 2018 and 2019, five patients were admitted to our workplace with 1–3-year history of bilateral or unilateral throat pain, otalgia and pharyngeal foreign body sensation. As a therapeutic novelty in the surgical approach to this condition, we used individual 3D printed models to measure and identify the exact location of the resection of the styloid process without damaging the surrounding anatomical structures, such as the facial, accessory, hypoglossal, and vagal nerves; the internal jugular vein; and the internal carotid artery. Results: Compared to traditional surgical methods without 3D models, 3D models helped to better identify cutting edges and major landmarks used in surgical treatment of Eagle’s syndrome. Printed models provided assistance with the exact location of the styloid process resection position without damaging the surrounding anatomical structures such as the facial, accessory, hypoglossal, and vagal nerves; the internal jugular vein; and the internal carotid artery. Conclusion: In our clinical report, we used 3D printed models for navigation and planning during surgical procedures involving resections of the elongated styloid process. Additionally, we can formulate a new hypothesis: the elongated styloid process is a form of atavism of the bony hyoid apparatus in our evolutionary ancestors that is evolutionarily encoded or arises from disrupted degeneration of the middle portion of embryonal Reichert´s cartilage of the second pharyngeal arch. Under normal conditions, this portion does not ossify but degenerates and transforms into a connective tissue band, the future stylohyoid ligament.


2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Gabriel Venne ◽  
Greg Esau ◽  
Ryan T. Bicknell ◽  
J. Tim Bryant

Purpose. Fixation methods for consistent anatomical structure positioning in biomechanical testing can be challenging. Image-based 3D printing is an attractive method for fabrication of biomechanical supports of anatomical structure due to its ability to precisely locate anatomical features with respect to the loading system. Method. A case study is presented to provide a design guide for fixation block fabrication. The anatomy of interest was CT scanned and reconstructed in 3D. The model was imported into commercially available CAD software and modified into a solid object and to create the fixture block. The CAD fixture block is standardized such that anatomical features are always in the same position for the testing system by subtracting the anatomy from a base fixture block. Results. This method allowed a strong immobilization of anatomical specimens and a controlled and consistent positioning feature with respect to the testing system. Furthermore, the fixture block can be easily modified and adapted to anatomical structures of interest using CAD software. Conclusion. This approach allows preservation of the bony anatomy integrity and provides a repeatable and consistent anatomical positioning with respect to the testing system. It can be adapted for other anatomical structures in various other biomechanical settings.


2019 ◽  
Vol 47 (6) ◽  
pp. E21
Author(s):  
Jia-Ping Zheng ◽  
Chu-Zhong Li ◽  
Guo-Qiang Chen

OBJECTIVEThe aim of the present study was to investigate the practical value of a multimaterial and multicolor 3D-printed model in anatomical teaching, surgical training, and preoperative planning of transnasal endoscopic surgery for pituitary adenoma.METHODSMultimodality neuroimaging data were obtained in a 42-year-old healthy male volunteer and a 40-year-old female patient with an invasive nonfunctional pituitary adenoma. Three 3D-printed models were produced: a monomaterial and monocolor model, a monomaterial and multicolor model, and a multimaterial and multicolor model. The effects on anatomical teaching and surgical training for exposing the vidian nerve were assessed by 12 residents, and the training effect was validated on cadavers. The practical values for preoperative planning were evaluated by 6 experienced neurosurgeons. All evaluations were based on 5-point Likert questionnaires.RESULTSThe multimaterial and multicolor model was superior to the monomaterial models in surgical training for exposing the vidian nerve (Fisher test; p < 0.05). In addition, the multimaterial and multicolor model was superior to the monomaterial models in anatomical teaching and preoperative planning (Friedman test; p < 0.05).CONCLUSIONSMultimaterial and multicolor 3D printing technology makes it convenient and efficient to produce a practical model for simulating individualized and complex anatomical structures in the sellar region. Furthermore, the multimaterial model can provide a more realistic manipulative experience for surgical training and facilitate the preoperative planning.


Author(s):  
P. M. Lowrie ◽  
W. S. Tyler

The importance of examining stained 1 to 2μ plastic sections by light microscopy has long been recognized, both for increased definition of many histologic features and for selection of specimen samples to be used in ultrastructural studies. Selection of specimens with specific orien ation relative to anatomical structures becomes of critical importance in ultrastructural investigations of organs such as the lung. The uantity of blocks necessary to locate special areas of interest by random sampling is large, however, and the method is lacking in precision. Several methods have been described for selection of specific areas for electron microscopy using light microscopic evaluation of paraffin, epoxy-infiltrated, or epoxy-embedded large blocks from which thick sections were cut. Selected areas from these thick sections were subsequently removed and re-embedded or attached to blank precasted blocks and resectioned for transmission electron microscopy (TEM).


2016 ◽  
Vol 77 (S 02) ◽  
Author(s):  
Hassan Othman ◽  
Sam Evans ◽  
Daniel Morris ◽  
Saty Bhatia ◽  
Caroline Hayhurst

Sign in / Sign up

Export Citation Format

Share Document