Microbial inactivation by new technologies of food preservation

2005 ◽  
Vol 98 (6) ◽  
pp. 1387-1399 ◽  
Author(s):  
P. Mañas ◽  
R. Pagán
Antioxidants ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 54
Author(s):  
Monika Mieszczakowska-Frąc ◽  
Karolina Celejewska ◽  
Witold Płocharski

Nowadays, thermal treatments are used for extending the shelf-life of vegetable and fruit products by inactivating microorganisms and enzymes. On the other hand, heat treatments often induce undesirable changes in the quality of the final product, e.g., losses of nutrients, color alterations, changes in flavor, and smell. Therefore, the food industry is opening up to new technologies that are less aggressive than thermal treatment to avoid the negative effects of thermal pasteurization. Non-thermal processing technologies have been developed during the last decades as an alternative to thermal food preservation. Processing changes the structure of fruit and vegetables, and hence the bioavailability of the nutrients contained in them. In this review, special attention has been devoted to the effects of modern technologies of fruit and vegetable processing, such as minimal processing (MPFV), high-pressure processing (HPP), high-pressure homogenization (HPH), ultrasounds (US), pulsed electric fields (PEF), on the stability and bioavailability of vitamin C.


1995 ◽  
Vol 1 (2-3) ◽  
pp. 75-90 ◽  
Author(s):  
J. Claude Cheftel

High pressure (1 to 10 kbars, i.e. 100-1000 MPa) affects biological constituents and systems. Several physicochemical properties of water are modified, such as the density, the ionic dissociation (and pH), and the melting point of ice. Pressure-induced unfolding, aggregation, and gelation of food proteins mainly depend on the effects of pressure on various noncovalent bonds and interactions. Enzyme inactivation (e.g., of ATPases) also results from similar effects, but some enzymes, including oxidative enzymes from fruits and vegetables, are strongly baroresistant. Chemical reactions, macromolecular transconformations, changes in membrane structure, or changes in crystal form and melting point that are accompanied by a decrease in volume are enhanced under pressure (and vice versa). Several of these phenomena, still poorly identified, are involved in the high inactivation ratio (5–6 logarithmic cycles) of most vegetative microbial cells: gram-negative bacteria, yeasts, complex viruses, molds, and gram-positive bacteria, in this decreasing order of sensitivity to pressure. Much variability is noted in the baroresistance of microorganisms, even within one single species or genus. Other parameters influence this resistance: pressure level, holding time (a two-phase kinetics of inactivation is often observed that prevents the calculation of decimal reduction times), temperature of pressure processing (temperatures above 50°C or between –30 and +5°C enhancing inactivation), composition of the medium or of the food (the pH having apparently little influence, but high salt or sugar concentrations, and low water contents, exerting very strong baroprotective effects). Taking into account the baroprotective effects of some food constituents and the strong resistance of some microbial strains, recent research aims at combined processes in which high pressure is associated with moderate temperature, CO2, other bacteriostatic agents, or to nonthermal physical processes such as ultrasounds, alternative currents, high-voltage electric pulses, and so forth. The safety and refrigerated shelf life of pressurized foods could be maintained or extended, while the sensorial quality should improve due to the reduced severity of thermal processing. Further research is, however, needed for the regulatory authorities to assess and accept these novel foods and processes.


2007 ◽  
Vol 53 (7) ◽  
pp. 813-821 ◽  
Author(s):  
N. Elmnasser ◽  
S. Guillou ◽  
F. Leroi ◽  
N. Orange ◽  
A. Bakhrouf ◽  
...  

In response to consumer preferences for high quality foods that are as close as possible to fresh products, athermal technologies are being developed to obtain products with high levels of organoleptic and nutritional quality but free of any health risks. Pulsed light is a novel technology that rapidly inactivates pathogenic and food spoilage microorganisms. It appears to constitute a good alternative or a complement to conventional thermal or chemical decontamination processes. This food preservation method involves the use of intense, short-duration pulses of broad-spectrum light. The germicidal effect appears to be due to both photochemical and photothermal effects. Several high intensity flashes of broad spectrum light pulsed per second can inactivate microbes rapidly and effectively. However, the efficacy of pulsed light may be limited by its low degree of penetration, as microorganisms are only inactivated on the surface of foods or in transparent media such as water. Examples of applications to foods are presented, including microbial inactivation and effects on food matrices.


2021 ◽  
Vol 286 ◽  
pp. 04008
Author(s):  
Elena Sorică ◽  
Cristian Marian Sorică ◽  
Mario Cristea ◽  
Iulia Andreea Grigore

Food preservation is the process of treating food, with the aim of preserving its qualities for as long as possible. Extending the freshness period for processed foods has been and is a continuing challenge for producers in the food industry. New technologies and conservation methodologies are continuously researched, which will have as little effect as possible on the nutritional value of the products. Microwave food processing is constantly evolving, rapid heating and high energy efficiency are the major advantages of using this technology. The paper presents a study regarding the preservation of food products using microwaves, its acting mechanism and other applications of microwaves for food processing, as well as some installations and equipment that use this technology.


2012 ◽  
Vol 7 (6) ◽  
Author(s):  
Frampton Franklin Santana ◽  
Pedro Esteves Duarte Augusto ◽  
Marcelo Cristianini

Thermal process is still the most used and safer method for food preservation. Although the mathematical modelling of heat transfer has been used for thermal process evaluation, microbial validation is rarely carried out, and the evaluation of retortable stand up pouch processes were not studied. The present work employed a finite elements analysis model (FEA) for the evaluation of a conductive meat pet food process sterilization in stand up retortable pouches. The results obtained by the model showed good agreement with the experimental values, for both temperature histories and microbial inactivation comparison. The results obtained demonstrate the utility of using mathematical models for describing the heat transfer and microbial inactivation in food thermal process, and reinforce that it can be a powerful tool in food process evaluation and design.


2020 ◽  
Vol 122 (9) ◽  
pp. 2939-2952
Author(s):  
Lívio Antônio Silva Pereira ◽  
Raquel Martino Bemfeito ◽  
Carla Martino Bemfeito ◽  
Priscila de Castro e Silva ◽  
Jéssica Ferreira Rodrigues ◽  
...  

PurposeThe main purpose of this paper was to evaluate the influence of the zein coating containing essential oils on the sensory characteristics of sodium-reduced mozzarellas.Design/methodology/approachMozzarellas were prepared by dipping in brine containing 5, 10, 15 or 20% of NaCl (w/v) that correspond, respectively, to 25, 50, 75 and 100% of NaCl content used in industry. These salted mozzarellas and another one, unsalted, were coated by an edible zein film added with 3% of a mixture of thyme and garlic essential oils (1:1). They were subjected to sensory analysis in relation to salty taste and overall impression. The mozzarella without salt reduction (20% NaCl w/v), coated or uncoated with the edible film, was also subjected to the analysis of water loss and microbiological quality, in order to evaluate the impact of this film on product quality.FindingsThe zein coating added with oils did not compromise the sensory acceptance of the mozzarella prepared with up to 50% of salt reduction. Water loss and microbial growth were lower in zein-coated mozzarella than in uncoated mozzarella. These results showed that this film could be applied as natural additive, contributing to the microbiological and sensory characteristics of the mozzarella.Originality/valueThis paper contributes to reducing the lack of studies in relation to new technologies for food preservation and sodium reduction. In addition, the zein coating containing essential oils can be tested on other food categories.


Author(s):  
◽  
◽  
◽  
◽  

Objective: To review the literature on new techniques of food conservation, focusing on the use of ultrasound. Material and methods: Bibliographic survey through digital platforms such as Scielo and Pubmed between 2018-2019. Results: Ultrasound is an innovative technology with great possibilities of use on an industrial scale. The main techniques used are: 1. cooking: uniform heat transfer, increasing the quality in characteristics such as taste, color and texture, preserving properties such as essential proteins being more effective than the frying pan; 2. cutting, widely used – cavitation will generate less losses and give precise cuts than the razor ; 3. The freezing/crystallization – the temperature decreases quickly having less ice crystals and reducing the time it would take if it was a freezing process; and finally 4, the emulsification, using less energy and less separation, giving more stability than the mechanical process. The ultrasound presents its alterations in meat foods as an improvement in texture and benefits in the extraction of proteins. Conclusion: Thus, the Ultrasonic Technology has great potential in the conservation of food, by keeping them stable with its characteristics. Its applicability is still being studied for better adaptation in the industrial scale. The nutritionist should be aware of these new techniques to help in the formulation of products with better nutritional value and food safety.


2007 ◽  
Vol 73 (12) ◽  
pp. 3814-3821 ◽  
Author(s):  
M. Somolinos ◽  
D. Garc�a ◽  
S. Cond�n ◽  
P. Ma�as ◽  
R. Pag�n

ABSTRACTThe objective of this study was to investigate the occurrence of sublethal injury after the pulsed-electric-field (PEF) treatment of two yeasts,Dekkera bruxellensisandSaccharomyces cerevisiae, as well as the relation of sublethal injury to the inactivating effect of the combination of PEF and sorbic acid. PEF caused sublethal injury in both yeasts: more than 90% of survivingD. bruxellensiscells and 99% of survivingS. cerevisiaecells were sublethally injured after 50 pulses at 12 kV/cm in buffer at pHs of both 7.0 and 4.0. The proportion of sublethally injured cells reached a maximum after 50 pulses at 12.0 kV/cm (S. cerevisiae) or 16.5 kV/cm (D. bruxellensis), and it kept constant or progressively decreased at greater electric field strengths and with longer PEF treatments. Sublethally PEF-injured cells showed sensitivity to the presence of sorbic acid at a concentration of 2,000 ppm. A synergistic inactivating effect of the combination of PEF and sorbic acid was observed. Survivors of the PEF treatment were progressively inactivated in the presence of 2,000 ppm of sorbic acid at pH 3.8, with the combined treatments achieving more than log105 cycles of dead cells under the conditions investigated. This study has demonstrated the occurrence of sublethal injury after exposure to PEF, so yeast inactivation by PEF is not an all-or-nothing event. The combination of PEF and sorbic acid has proven to be an effective method to achieve a higher level of yeast inactivation. This work contributes to the knowledge of the mechanism of microbial inactivation by PEF, and it may be useful for improving food preservation by PEF technology.


Sign in / Sign up

Export Citation Format

Share Document