Cranial translation of the elevated prepuce in dogs before and after two modifications: A cadaveric study

2021 ◽  
Author(s):  
Christos Yiapanis ◽  
Raya Atamna ◽  
Mirit Gan El ◽  
Anna Shipov ◽  
Tryfon Chochlios ◽  
...  
Keyword(s):  
Cadaveric Study ◽  
Before And After

The effect of in-situ decompression on ulnar nerve stability: a cadaveric study

2017 ◽  
Vol 42 (7) ◽  
pp. 715-719 ◽  
Author(s):  
B. Butler ◽  
J. Peelman ◽  
L.-Q. Zhang ◽  
M. Kwasny ◽  
D. Nagle
Keyword(s):  
Ulnar Nerve ◽  
Medial Epicondyle ◽  
Cadaveric Study ◽  
Flexion Angle ◽  
Anterior Translation ◽  
Nerve Decompression ◽  
Flexor Carpi Ulnaris ◽  
Before And After ◽  
Fresh Frozen

Ten fresh frozen right cadaver arms were placed in a motorized jig and an in-situ ulnar nerve decompression was performed in 5 mm increments distally to the flexor carpi ulnaris (FCU) aponeurosis then proximally to the intermuscular septum. The elbows were ranged 0–135° after each incremental decompression and the ulnar nerve to medial epicodyle distance was measured to assess for nerve translation/subluxation compared with baseline (prerelease) values. None of the specimens had ulnar nerve subluxation (defined as anterior translation past the medial epicondyle) even after full decompression. Furthermore, there were no statistically significant ulnar nerve translations (defined as any difference in distance from ulnar nerve to medial epicondyle before and after each decompression) for any flexion angle or extent of decompression. This study provides biomechanical evidence that in situ ulnar nerve decompression from the FCU aponeurosis to the intermuscular septum does not result in significant ulnar nerve translation or subluxation.

Ulnar nerve transposition in the hand: a cadaveric study

2018 ◽  
Vol 44 (3) ◽  
pp. 269-272
Author(s):  
Steven Beldner ◽  
Remy V. Rabinovich ◽  
Daniel B. Polatsch ◽  
Derek M. Gonzalez
Keyword(s):  
Ulnar Nerve ◽  
Average Length ◽  
Primary Repair ◽  
Cadaveric Study ◽  
Segmental Defect ◽  
Motor Branch ◽  
Gap Closure ◽  
Before And After ◽  
Free Environment ◽  
Nerve Transposition

Primary repair of a nerve is preferable over nerve grafting when a tension-free environment can be achieved. The purpose of this cadaveric study was to evaluate the facility of nerve-gap closure gained by removing the hamate hook, eliminating the circuitous path of the motor branch of the ulnar nerve in the hand. Six cadaveric specimens were dissected and the length of the motor branch coursing through Guyon’s canal before and after hamate hook excision and nerve transposition was recorded. Average length was significantly shorter in specimens after transposition, with a mean 21% reduction relative to the nerve’s original course. This knowledge may help guide surgeons on whether excision of the hamate hook will allow for primary repair of the nerve when a segmental defect or retraction and scarring of the nerve stumps is encountered.

The Function of the Short Lateral Collateral Ligaments of the Canine Tarsus: A Cadaveric Study

2019 ◽  
Vol 55 (5) ◽  
pp. 220-225
Author(s):  
Riccarda Schuenemann ◽  
Sandra Bogisch
Keyword(s):  
External Rotation ◽  
Lateral Collateral Ligament ◽  
Cadaveric Study ◽  
Collateral Ligaments ◽  
Collateral Ligament ◽  
Clinical Behavior ◽  
Before And After ◽  
Lateral Subluxation ◽  
Lateral Collateral Ligaments ◽  
K Wires

ABSTRACT Information on the clinical behavior and treatment of cases with an isolated rupture of the short collateral ligaments of the canine tarsus is sparse and contradictory in the veterinary literature. Our objective was to evaluate the function of the short lateral collateral ligaments (SLCLs) of the tarsocrural joint in 90° flexion. Eight canine cadaveric limbs were tested for internal/external rotation and valgus/varus before and after transection of one or both SLCLs. In one group, the fibulocalcaneal ligament was transected first, followed by the fibulotalar. In the second group, the order of ligament transection was reversed. Angular changes between two k-wires were measured and compared. External rotation increased significantly after transection of one or both SLCLs (P = .009 and P < .0005), as did varus (P = .021 and P = .001). Lateral subluxation was only possible when both SLCLs were cut. Unlike the long lateral collateral ligament, which stabilizes against deviation toward medial, both SLCLs are major stabilizers against subluxation toward lateral. This important difference must be considered in clinical patients with isolated rupture of the SLCLs.

Influence of training on dorsal tangential radiographic view to detect screw protrusion after anterior plating of the distal radius: a cadaveric study

2020 ◽  
Vol 45 (8) ◽  
pp. 864-870
Author(s):  
Minke Bergsma ◽  
Miryam C. Obdeijn ◽  
Stein J. Janssen ◽  
Gregory I. Bain ◽  
Ruurd L. Jaarsma ◽  
...  
Keyword(s):  
Distal Radius ◽  
Diagnostic Performance ◽  
Interobserver Agreement ◽  
Cadaveric Study ◽  
Specific Training ◽  
Training Video ◽  
Self Confidence ◽  
Clinical Series ◽  
Before And After ◽  
Anterior Plating

In this cadaveric study of anterior plating of the distal radius, we aimed to determine the interobserver agreement and diagnostic performance for detecting dorsally protruding screws using the dorsal tangential radiographic view before and after specific training. Without prior instruction, 13 observers interpreted the dorsal tangential view of cadaveric specimens, in which anterior radial plates were placed. After seeing a training video on the dorsal tangential view, they repeated the task. Though we found that accuracy and interobserver agreement was lower than described in some other clinical series, training led to statistically significant improvements of (1) the interobserver agreement on the decision to exchange screws, (2) the self-confidence of the surgeon in obtaining adequate views, and (3) the number of fluoroscopic images required to obtain these views. After training, the number of protruding screws missed was reduced by 36%, but 7% of dorsally protruding screws was still missed.

scholarly journals Anatomy of posterior cruciate ligament retained in a posterior cruciate ligament retaining total knee replacement: a cadaveric study

SICOT-J ◽  
2018 ◽  
Vol 4 ◽  
pp. 40
Author(s):  
Tarun Goyal ◽  
Mukesh Singla ◽  
Souvik Paul
Keyword(s):  
Total Knee Replacement ◽  
Posterior Cruciate Ligament ◽  
Knee Replacement ◽  
Soft Tissues ◽  
Cruciate Ligament ◽  
Cadaveric Study ◽  
Replacement Surgery ◽  
Before And After ◽  
Total Knee ◽  
Femoral Side

Background: Recent evidence has highlighted a risk that the majority of posterior cruciate ligament (PCL) is removed while making bone cuts in tibia and femur during total knee replacement surgery. Aim of this cadaveric study is to calculate how much PCL footprint is retained in a PCL retaining prosthesis after routine tibial and femoral cuts are made.  Methods: Twelve paired formalin-fixed Indian cadaveric knees were studied. Knees were disarticulated and all soft tissues were circumferentially removed from the tibia and femur. Footprints of antero-lateral and postero-medial bundles were marked on tibia and femur. Proximal tibial and distal femoral cuts were made using standard cutting jigs (Zimmer NexGen LPS). Digital photographs were taken with a magnification marker attached on the bone before and after making the cuts. Area of PCL insertion before and after the bone cuts was measured using software ImageJ (National Institute of Health). Results: Footprint on tibial side was reduced by 9.1%, and on femoral side by 21.8%. Footprint of AL bundle was reduced by 24.3% on the tibial side and by 15.3% on the femoral side. Footprint of PM bundle on tibia was not affected by the bone cut but was reduced by 18.5% on the femoral side. Conclusion: Tibial and femoral insertions of PCL are relatively well preserved after bone cuts are made in a posterior cruciate retaining TKR. There is differential sectioning of antero-lateral and postero-medial bundles of PCL on tibial and femoral sides.

Deformation Replication

1970 ◽  
Vol 28 ◽  
pp. 280-281
Author(s):  
J. Temple Black
Keyword(s):  
Cutting Speed ◽  
Machining Process ◽  
Depth Of Cut ◽  
Rake Face ◽  
Orthogonal Machining ◽  
Aluminum Chips ◽  
Before And After ◽  
Materials Used ◽  
Glass Knife ◽  
Very High

Tool materials used in ultramicrotomy are glass, developed by Latta and Hartmann (1) and diamond, introduced by Fernandez-Moran (2). While diamonds produce more good sections per knife edge than glass, they are expensive; require careful mounting and handling; and are time consuming to clean before and after usage, purchase from vendors (3-6 months waiting time), and regrind. Glass offers an easily accessible, inexpensive material ($0.04 per knife) with very high compressive strength (3) that can be employed in microtomy of metals (4) as well as biological materials. When the orthogonal machining process is being studied, glass offers additional advantages. Sections of metal or plastic can be dried down on the rake face, coated with Au-Pd, and examined directly in the SEM with no additional handling (5). Figure 1 shows aluminum chips microtomed with a 75° glass knife at a cutting speed of 1 mm/sec with a depth of cut of 1000 Å lying on the rake face of the knife.

The Clinical, Roentgenological and Morphological Effects of an Acute Exposure of Phosgene on the Lungs of Dogs

1971 ◽  
Vol 29 ◽  
pp. 236-237
Author(s):  
R. F. Bils ◽  
W. F. Diller ◽  
F. Huth
Keyword(s):  
Latent Period ◽  
Chemical Industry ◽  
Toxic Substance ◽  
Lung Edema ◽  
X Rays ◽  
Beagle Dogs ◽  
Male And Female ◽  
Morphological Alterations ◽  
Before And After ◽  
Electron Microscopes

Phosgene still plays an important role as a toxic substance in the chemical industry. Thiess (1968) recently reported observations on numerous cases of phosgene poisoning. A serious difficulty in the clinical handling of phosgene poisoning cases is a relatively long latent period, up to 12 hours, with no obvious signs of severity. At about 12 hours heavy lung edema appears suddenly, however changes can be seen in routine X-rays taken after only a few hours' exposure (Diller et al., 1969). This study was undertaken to correlate these early changes seen by the roengenologist with morphological alterations in the lungs seen in the'light and electron microscopes.Forty-two adult male and female Beagle dogs were selected for these exposure experiments. Treated animals were exposed to 94.5-107-5 ppm phosgene for 10 min. in a 15 m3 chamber. Roentgenograms were made of the thorax of each animal before and after exposure, up to 24 hrs.

Ultrastructure of Melanin Formation in Curvularia sp., Alternaria sp., and Drechslera Sorokiniana

1977 ◽  
Vol 35 ◽  
pp. 398-399
Author(s):  
M. H. Wheeler ◽  
W. J. Tolmsoff ◽  
A. A. Bell
Keyword(s):  
Potassium Phosphate ◽  
Thielaviopsis Basicola ◽  
Wild Type ◽  
Potassium Phosphate Buffer ◽  
Transmission Microscopy ◽  
Electron Transmission ◽  
Melanin Formation ◽  
Before And After ◽  
Alternaria Sp ◽  
Electron Transmission Microscopy

(+)-Scytalone [3,4-dihydro-3,6,8-trihydroxy-l-(2Hj-naphthalenone] and 1,8-di- hydroxynaphthalene (DHN) have been proposed as intermediates of melanin synthesis in the fungi Verticillium dahliae (1, 2, 3, 4) and Thielaviopsis basicola (4, 5). Scytalone is enzymatically dehydrated by V. dahliae to 1,3,8-trihydroxynaphthalene which is then reduced to (-)-vermelone [(-)-3,4- dihydro-3,8-dihydroxy-1(2H)-naphthalenone]. Vermelone is subsequently dehydrated to DHN which is enzymatically polymerized to melanin.Melanin formation in Curvularia sp., Alternaria sp., and Drechslera soro- kiniana was examined by light and electron-transmission microscopy. Wild-type isolates of each fungus were compared with albino mutants before and after treatment with 1 mM scytalone or 0.1 mM DHN in 50 mM potassium phosphate buffer, pH 7.0. Both chemicals were converted to dark pigments in the walls of hyphae and conidia of the albino mutants. The darkened cells were similar in appearance to corresponding cells of the wild types under the light microscope.

Evaluation of Freezing Methods by Low Temperature X-Ray Diffraction

1977 ◽  
Vol 35 ◽  
pp. 330-333
Author(s):  
T. Gulik-Krzywicki ◽  
M.J. Costello
Keyword(s):  
Biological Materials ◽  
Molecular Organization ◽  
X Ray Diffraction ◽  
Glass Capillary ◽  
X Ray ◽  
Rate Dependent ◽  
Before And After ◽  
Freeze Etching ◽  
Diffraction Patterns ◽  
Set Up

Freeze-etching electron microscopy is currently one of the best methods for studying molecular organization of biological materials. Its application, however, is still limited by our imprecise knowledge about the perturbations of the original organization which may occur during quenching and fracturing of the samples and during the replication of fractured surfaces. Although it is well known that the preservation of the molecular organization of biological materials is critically dependent on the rate of freezing of the samples, little information is presently available concerning the nature and the extent of freezing-rate dependent perturbations of the original organizations. In order to obtain this information, we have developed a method based on the comparison of x-ray diffraction patterns of samples before and after freezing, prior to fracturing and replication.Our experimental set-up is shown in Fig. 1. The sample to be quenched is placed on its holder which is then mounted on a small metal holder (O) fixed on a glass capillary (p), whose position is controlled by a micromanipulator.

The Precipitation of Si in AlCuSi Thin Films

1973 ◽  
Vol 31 ◽  
pp. 34-35 ◽  
Author(s):  
R. M. Anderson
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Heat Treatment ◽  
Solid Solution ◽  
Integrated Circuit ◽  
Copper Film ◽  
Solution Concentration ◽  
X Ray ◽  
Silicon Thin Films ◽  
Before And After

Aluminum-copper-silicon thin films have been considered as an interconnection metallurgy for integrated circuit applications. Various schemes have been proposed to incorporate small percent-ages of silicon into films that typically contain two to five percent copper. We undertook a study of the total effect of silicon on the aluminum copper film as revealed by transmission electron microscopy, scanning electron microscopy, x-ray diffraction and ion microprobe techniques as a function of the various deposition methods.X-ray investigations noted a change in solid solution concentration as a function of Si content before and after heat-treatment. The amount of solid solution in the Al increased with heat-treatment for films with ≥2% silicon and decreased for films <2% silicon.

Sign in / Sign up

Export Citation Format

Share Document