An FEM Simulation for Guided Elastic Wave Generation and Reflection in Hollow Cylinders With Corrosion Defects

2001 ◽  
Vol 124 (1) ◽  
pp. 108-117 ◽  
Author(s):  
Wenhao Zhu
Keyword(s):  
Mode Conversion ◽  
Fem Simulation ◽  
Guided Wave ◽  
Destructive Interference ◽  
Tubular Structures ◽  
Wave Reflections ◽  
Periodic Ring ◽  
Hollow Cylinders ◽  
Corrosion Defects ◽  
Wave Emission

The generation and reflection of guided elastic waves in hollow cylinders with corrosion defects have been investigated numerically for the purpose of nondestructive evaluation (NDE) of tubular structures. A new guided wave transducer model, time-delay periodic ring arrays (TDPRAs), has been used to generate the axisymmetric guided wave modes in hollow cylinders, and this is simulated by a finite element calculation. Unidirectional guided wave emission can be achieved by arranging a TDPRA’s parameters according to the principle of constructive and destructive interference. The guided wave reflections by axisymetric and nonaxisymmetric corrosion defects are analyzed using a 2-D and a 3-D FE simulation, respectively. The reflection features as well as mode conversion under the L0,1 and L0,2 mode incidences are discussed in association with the corrosion depth, the axial and circumferential extents in hollow cylinders.

NUMERICAL MODELING OF WALL THINNING DEFECTS CHARACTERIZATION: APPLICATIONS IN LAMB WAVE GENERATION AND INTERACTION

2008 ◽  
Vol 22 (11) ◽  
pp. 935-940
Author(s):  
HYUNJO JEONG ◽  
SEUNG-SEOK LEE ◽  
YOUNG-GIL KIM
Keyword(s):  
Guided Waves ◽  
Lamb Waves ◽  
Mode Conversion ◽  
Wave Interaction ◽  
Guided Wave ◽  
Destructive Interference ◽  
Wall Thinning ◽  
Mode Dispersion ◽  
Periodic Ring ◽  
Axisymmetric Scattering

The generation of axisymmetric Lamb waves and interaction with wall thinning (corrosion) defects in hollow cylinders are simulated using the finite element method. Guided wave interaction with defects in cylinders is challenged by the multi-mode dispersion and the mode conversion. In this paper, two longitudinal, axisymmetric modes are generated using the concept of a time-delay periodic ring arrays (TDPRA), which makes use of the constructive/destructive interference concept to achieve the unidirectional emission and reception of guided waves. The axisymmetric scattering by the wall thinning extending in full circumference of a cylinder is studied with a two-dimensional FE simulation. The effect of wall thinning depth, axial extension, and the edge shape on the reflections of guided waves is discussed.

A compact guided-wave EMAT with pulsed electromagnet for ferromagnetic tube inspection

2020 ◽  
Vol 64 (1-4) ◽  
pp. 951-958
Author(s):  
Tianhao Liu ◽  
Yu Jin ◽  
Cuixiang Pei ◽  
Jie Han ◽  
Zhenmao Chen
Keyword(s):  
Power Plants ◽  
Signal To Noise Ratio ◽  
Small Diameter ◽  
Performance Testing ◽  
Guided Wave ◽  
High Signal ◽  
Receiver Coil ◽  
Signal To Noise ◽  
Corrosion Defects

Small-diameter tubes that are widely used in petroleum industries and power plants experience corrosion during long-term services. In this paper, a compact inserted guided-wave EMAT with a pulsed electromagnet is proposed for small-diameter tube inspection. The proposed transducer is noncontact, compact with high signal-to-noise ratio and unattractive to ferromagnetic tubes. The proposed EMAT is designed with coils-only configuration, which consists of a pulsed electromagnet and a meander pulser/receiver coil. Both the numerical simulation and experimental results validate its feasibility on generating and receiving L(0,2) mode guided wave. The parameters for driving the proposed EMAT are optimized by performance testing. Finally, feasibility on quantification evaluation for corrosion defects was verified by experiments.

Experimental Research on Damages Detection of Pipeline Structure by Using PZT-Based Waves

2011 ◽  
Author(s):  
Shi Yan ◽  
Binbin He ◽  
Naizhi Zhao
Keyword(s):  
Damage Detection ◽  
Lead Zirconate Titanate ◽  
Smart Materials ◽  
Arrival Time ◽  
Mode Conversion ◽  
Guided Wave ◽  
The Other ◽  
Damage Location ◽  
The Waves ◽  
Peak Value

Pipeline structure may generate damages during its service life due to the influence of environment or accidental loading. The damages need to be detected and repaired if they are severe enough to influence the transportation work. Non-destructive detection using smart materials combined with suitable diagonal algorithms are widely used in the field of structural health monitoring (SHM). Piezoelectric ceramics (such as Lead Zirconate Titanate, PZT) is one of the smart materials to be applied in the SHM due to the piezoelectric effect. So far, the PZT-based wave method is widely used for damage detection of structures, in particular, pipeline structures. A series of piezoelectric patches are bonded on the surface of the pipeline structure to monitor the damages such as local crack or effective area reduction due to corrosion by using diagonal waves. The damage of the pipeline structure can be detected by analysis of the received diagonal waves which peak value, phase, and arriving time can be deferent from the health ones. The response of the diagonal wave is not only correlated to the damage location through estimation of the arrival time of the wave peak, but also associated with the peak value of the wave for the reduction of wave energy as the guided wave passing through the damages. Therefore, the presence of damages in the pipeline structure can be detected by investigating the parameter change of the guided waves. The change of the wave parameters represents the attenuation, deflection and mode conversion of the waves due to the damages. In addition, the guided wave has the ability of quick detecting the damage of the pipeline structure and the simplicity of generating and receiving detection waves by using PZT patches. To verify the proposed method, an experiment is designed and tested by using a steel pipe bonded the PZT patches on the surface of it. The PZT patches consist of an array to estimate the location and level of the damage which is simulated by an artificial notch on the surface of the structure. The several locations and deep heights of the notches are considered during the test. A pair of the PZT patches are used at the same time as one is used as an actuator and the other as a sensor, respectively. A tone burst of 5 cycles of wave shape is used during the experiment. A wave generator is applied to create the proposed waves, and the waves are amplified by an amplifier to actuate the PZT patch to emit the diagonal waves with appropriately enough energy. Meanwhile, the other PZT patch is used as a sensor to receive the diagonal signals which contain the information of the damages for processing. For data processing, an index of root mean square deviation (RMSD) of the received data is used to estimate the damage level by compare of the data between the damaged and the health peak valves of the received signals. The time reversal method which aimed at increasing the efficiency of the detection is also used to detect the damage location by estimating the arrival time of the reflected wave passing with a certain velocity. The proposed method experimentally validates that it is effective for application in damage detection of pipeline structure.

Axial guided wave characteristics in functionally graded one-dimensional hexagonal piezoelectric quasi-crystal cylinders

2021 ◽  
pp. 108128652110134
Author(s):  
B. Zhang ◽  
X.H. Wang ◽  
L. Elmaimouni ◽  
J.G. Yu ◽  
X.M. Zhang
Keyword(s):  
Coupling Effect ◽  
Energy Conversion Efficiency ◽  
Guided Wave ◽  
Functionally Graded ◽  
Phonon Modes ◽  
One Dimensional ◽  
Longitudinal Modes ◽  
Wave Characteristics ◽  
Piezoelectric Effects ◽  
Hollow Cylinders

In one-dimensional hexagonal piezoelectric quasi-crystals, there exist the phonon–phason, electro–phonon, and electro–phason couplings. Therefore, the phonon–phason coupling and piezoelectric effects on axial guided wave characteristics in one-dimensional hexagonal functionally graded piezoelectric quasi-crystal (FGPQC) cylinders are investigated by utilizing the Legendre polynomial series method. The dispersion curves and cut-off frequencies are illustrated. Wave characteristics in three hollow cylinders with different quasi-periodic directions are comparatively studied. Some new wave phenomena are revealed: the phonon–phason coupling and piezoelectric effects on the longitudinal and torsional phonon modes ( N = 0) vary as the quasi-periodic direction changes; the phonon–phason coupling effect on flexural–torsional modes in the r-, z-FGPQC hollow cylinders, and on flexural–longitudinal modes in ϑ-FGPQC hollow cylinders increases as N increases. The corresponding results obtained in this work lay the theoretical foundation for the design and manufacture of piezoelectric transducers with high resolution and energy-conversion efficiency.

scholarly journals Longitudinal Guided Wave Inspection of Small-Diameter Elbowed Steel Tubes with a Novel Squirrel-Cage Magnetostrictive Sensor

2019 ◽  
Vol 2019 ◽  
pp. 1-9
Author(s):  
Yao Liu ◽  
Xiucheng Liu ◽  
Chehua Yang ◽  
Wenxin Guo ◽  
Bin Wu ◽  
...  
Keyword(s):  
Finite Element ◽  
Guided Waves ◽  
Mode Conversion ◽  
Small Diameter ◽  
Longitudinal Mode ◽  
Guided Wave ◽  
Wall Defect ◽  
Squirrel Cage ◽  
Simulation Results ◽  
Magnetostrictive Sensor

In the study, ultrasonic longitudinal mode guided waves were employed to detect defects in elbowed tubes (without welds) with a diameter of 10 mm. Finite element simulation results highlighted that the emitted L(0,1) mode guided waves experienced strong reflection and mode conversion at the elbow region to generate F(1,1) mode, followed by slow and weak F(2,1) mode. The guided wave reflected from the elbow with a through-wall defect was manifested as two overlapped wave packets, which were good indicators of a defective elbow. To conduct L(0,1) mode guided waves inspection on the small-diameter elbowed tubes, a novel tailored squirrel-cage magnetostrictive sensor was employed in the experiment. The new sensor employed the configuration of segmental iron-cobalt strips and small-size permanent magnet arrays. The entire sensor is composed of two identical C-shaped sensor elements and can be recycled and installed conveniently. Experimental results obtained from healthy and defective tubes were consistent with the conclusions obtained from finite element simulations. An artificial through-wall defect at the elbow and a notch defect at the straight part of the tube could be simultaneously detected by L(0,1) mode guided waves through comparing experimental signals with simulation results.

Circumference Damage Identification in a Pipe Using Mode Conversion of Longitudinal Guided Wave

2013 ◽  
Vol 395-396 ◽  
pp. 787-791
Author(s):  
Jing Wu ◽  
Wei Wei Zhang
Keyword(s):  
Damage Detection ◽  
Damage Identification ◽  
Mode Conversion ◽  
Guided Wave ◽  
Symmetric Mode ◽  
Axially Symmetric ◽  
Mode Transformation ◽  
Damage Location

This paper aims to develop a method to identify the damage location in circumference direction of a pipe using mode transformation of longitudinal guided wave. The corrosion-like damage in bimetal pipe is considered. Case study that damage detection for a bimetal pipe is used to show the validity and advantage of the proposed method. It can be found that the axially symmetric mode guided wave encounter the damage and the three modes were received in reflection. The damage location in circumferential directions could be identified by conversed modes measured at one position. The simulation shows a good performance.

scholarly journals Defects Detection and Localization in Underwater Plates Using Laser Laterally Generated Pure Non-Dispersive S0 Mode

2019 ◽  
Vol 9 (3) ◽  
pp. 459 ◽  
Author(s):  
Qingnan Xie ◽  
Chenyin Ni ◽  
Zhonghua Shen
Keyword(s):  
Defect Detection ◽  
Lamb Waves ◽  
Mode Conversion ◽  
High Sensitivity ◽  
Laser Source ◽  
Dispersion Characteristics ◽  
High Attenuation ◽  
Corrosion Defects ◽  
Detection And Localization ◽  
Lateral Excitation

When working in humid environments, corrosion defects are easily produced in metallic plates. For defect detection in underwater plates, symmetric modes of Lamb waves are widely used because of their characteristics including long propagating distance and high sensitivity to defects. In this study, we extend our previous work by applying the laser laterally generated S0 mode to detection and localization of defects represented by artificial notches in an aluminum plate immersed in water. Pure non-dispersive S0 mode is generated in an underwater plate by lateral laser source irradiation and its fd (frequency·thickness) range is selected by theoretical calculation. Using this lateral excitation, the S0 mode is enhanced; meanwhile, the A0 mode is effectively suppressed. The mode-converted A0 mode from the incident S0 mode is used to detect and localize the defect. The results reveal a significantly improved capability to detect defects in an underwater plate using the laser laterally generated S0 mode, while that using A0 is limited due to its high attenuation. Furthermore, owing to the long propagating distance and the non-dispersion characteristics of the S0 generated by the lateral laser source, multiple defects can also be detected and localized according to the mode conversion at the defects.

Sign in / Sign up

Export Citation Format

Share Document