The Effects of Piston Skirt Profiles on Secondary Motion and Friction

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
Ozgur Gunelsu ◽  
Ozgen Akalin
Keyword(s):  
Power Loss ◽  
Radius Of Curvature ◽  
Cylinder Wall ◽  
Lateral Movement ◽  
Dynamics Model ◽  
Piston Skirt ◽  
Normal Forces ◽  
Oval Form ◽  
Secondary Motion ◽  
Frictional Performance

Piston skirt form deviating from a perfect cylinder is investigated numerically for an improved frictional performance. Three features defining the barrel and oval form of the skirt are compared in the search for lower friction power loss. Radius of curvature around the bulge of the barrel is changed to obtain a flatter or more-rounded lubricated area with respect to a hot-piston profile as well as the axial location of this bulge. On the other hand, the circumferential variation in the separation between the skirt and cylinder wall is represented by an elliptical piston and the aspect ratio is varied for comparison. These different skirt profiles are used in a developed piston secondary dynamics model solving for the lateral movement of the piston by calculating the hydrodynamic and boundary normal forces acting on the piston together with friction. Finally, an improved skirt profile is suggested to obtain better frictional efficiency.

scholarly journals Research on the influence of key structural parameters on piston secondary motion

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Haixiang Yang ◽  
Jilin Lei ◽  
Xiwen Deng ◽  
Jun Wen ◽  
Zhigao Wen ◽  
...  
Keyword(s):  
Power Loss ◽  
Structural Parameters ◽  
Cylinder Liner ◽  
Oil Consumption ◽  
Frictional Loss ◽  
Significance Level ◽  
Friction Power ◽  
Piston Skirt ◽  
Secondary Motion ◽  
Response Method

AbstractPiston secondary motion not only influences the side knocking of piston and frictional loss, but also influence the in-cylinder oil consumption and gas blow-by. An inline four-cylinder common rail diesel engine was chosen as the research object. Dynamic simulation model of piston assembly was built based on the piston and cylinder liner temperature field test. The impacts of pinhole offset, liner clearance and piston skirt ovality on piston secondary motion were researched. Based on the surface response method, the influence of multiple factors on friction power loss and slapping energy is estimated. The results indicate that: in-cylinder stress condition of piston will change with its structural parameters, then the secondary motion of piston will be affected as a result. Pinhole offset, liner clearance, piston skirt ovality and the interaction of the latter two all have significant effects on the friction power loss, while the slapping energy is significantly affected by liner clearance. Therefore, the parameters can be designed based on the significance level to optimize the secondary motion characteristics of the piston.

A study of the secondary piston motion arising from changes in the piston skirt profile using a simplified piston skirt model

2012 ◽  
Vol 227 (1) ◽  
pp. 38-47 ◽  
Author(s):  
PD McFadden ◽  
SR Turnbull
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Lubricant Film ◽  
Maximum Diameter ◽  
Cylinder Wall ◽  
Centre Of Mass ◽  
Piston Motion ◽  
Piston Skirt ◽  
Secondary Motion

An existing model of the interface between a parallel-sided piston skirt and the cylinder wall in an internal combustion engine is extended to allow the modelling of barrelling of the piston skirt. The effects of the skirt profile on the secondary motion of the piston and on the distribution of pressure in the lubricant film are examined. It is shown that piston secondary motion, and in particular rotation of the piston about the gudgeon pin, which might contribute to wear of the cylinder, can be reduced by appropriate positioning of the maximum diameter of the piston skirt in relation to the gudgeon pin and the centre of mass of the piston.

Piston dynamics, lubrication and tribological performance evaluation: A review

2018 ◽  
Vol 21 (5) ◽  
pp. 725-741 ◽  
Author(s):  
Cristiana Delprete ◽  
Abbas Razavykia
Keyword(s):  
Power Loss ◽  
Internal Combustion Engines ◽  
Internal Combustion ◽  
Tribological Performance ◽  
Operating Conditions ◽  
Friction Reduction ◽  
Design Parameters ◽  
Combustion Engines ◽  
Piston Skirt ◽  
Secondary Motion

Mechanical power loss of lubricated and bearing surfaces serves as an attractive domain for study and research in the field of internal combustion engines. Friction reduction at lubricated and bearing surface is one of the most cost-effective ways to reduce gas emission and improve internal combustion engines’ efficiency. This thus motivates automotive industries and researchers to investigate tribological performance of internal combustion engines. Piston secondary motion has prime importance in internal combustion engines and occurs due to unbalanced forces and moments in a plane normal to the wrist pin axis. Consequently, piston executes small translations and rotations within the defined clearance during the piston reciprocating motion. Mechanical friction power loss and lubrication at piston skirt/liner and radiated engine noise are dramatically affected by piston secondary dynamics. The lubrication mechanism, piston secondary motion and tribological performance are affected by piston design parameters (piston/liner clearance, wrist pin offset, skirt profile, etc.), lubricant rheology, oil transport mechanism and operating conditions. Therefore, this review is devoted to summarize the synthesis of main technical aspects, research efforts, conclusions and challenges that must be highlighted regarding piston skirt/liner lubrication and piston dynamics and slap.

Detailed analysis of piston secondary motion and tribological performance

2019 ◽  
Vol 21 (9) ◽  
pp. 1647-1661 ◽  
Author(s):  
Cristiana Delprete ◽  
Abbas Razavykia ◽  
Paolo Baldissera
Keyword(s):  
Piston Ring ◽  
Hydrodynamic Lubrication ◽  
Hydrodynamic Pressure ◽  
Tribological Performance ◽  
System Of Nonlinear Equations ◽  
Piston Skirt ◽  
Wide Range ◽  
Secondary Motion ◽  
Piston Ring Pack ◽  
Ring Pack

This article presents a detailed analytical model to evaluate piston skirt tribology under hydrodynamic lubrication. The contribution of the piston ring pack lubrication has been taken into account to study piston secondary motion and tribological performance. A system of nonlinear equations comprising Reynolds equation and force equilibrium is solved to calculate piston ring pack friction force and its moment about wrist pin axis. Instantaneous minimum oil film thickness at piston ring/liner interface has been estimated considering different boundary conditions: full Sommerfeld, oil separation, and Reynolds cavitation and reformation. The ring pack model has capability to be used for a wide range of ring face profiles under boundary and hydrodynamic lubrication. Piston secondary motion is evaluated using lubrication theory and equilibrium of forces and moments, to examine the effect of wrist pin location, piston skirt/liner clearance, and oil rheology. Numerical method and finite difference scheme have been used to define piston eccentricity and hydrodynamic pressure acting over the skirt.

A Helical Gear Pair Pocketing Power Loss Model

2013 ◽  
Author(s):  
David Talbot ◽  
Ahmet Kahraman ◽  
Satya Seetharaman
Keyword(s):  
Fluid Dynamics ◽  
Power Loss ◽  
Control Volume ◽  
Fluid Pressure ◽  
Helix Angle ◽  
Helical Gear ◽  
Gear Pair ◽  
Dynamics Model ◽  
Gear Mesh ◽  
Helical Gear Pair

A new fluid dynamics model is proposed to predict the power losses due to pocketing of air, oil, or an air-oil mixture in the helical gear meshes. The proposed computational procedure treats a helical gear pair as combination of a number of narrow face width spur gear segments staggered according to the helix angle and forms a discrete, fluid dynamics model of the medium being pocketed in the gear mesh. Continuity and conservation of momentum equations are applied to each coupled control volume filled with a compressible fluid mixture to predict fluid pressure and velocity distributions from, which the instantaneous pocketing power loss is calculated. The proposed model is exercised in order to investigate fluid pressure and velocity distributions in time, as well as pocketing power loss as a function of speed, helix angle and oil-to-air ratio.

scholarly journals The Analysis of Secondary Motion and Lubrication Performance of Piston considering the Piston Skirt Profile

2018 ◽  
Vol 2018 ◽  
pp. 1-27 ◽  
Author(s):  
Yanjun Lu ◽  
Sha Li ◽  
Peng Wang ◽  
Cheng Liu ◽  
Yongfang Zhang ◽  
...  
Keyword(s):  
Thermal Deformation ◽  
Work Performance ◽  
Cylinder Liner ◽  
Connecting Rod ◽  
Piston Skirt ◽  
Piston Cylinder ◽  
Lubrication Performance ◽  
Rod System ◽  
Liner System ◽  
Secondary Motion

The work performance of piston-cylinder liner system is affected by the lubrication condition and the secondary motion of the piston. Therefore, more and more attention has been paid to the secondary motion and lubrication of the piston. In this paper, the Jakobson-Floberg-Olsson (JFO) boundary condition is employed to describe the rupture and reformation of oil film. The average Reynolds equation of skirt lubrication is solved by the finite difference method (FDM). The secondary motion of piston-connecting rod system is modeled; the trajectory of the piston is calculated by the Runge-Kutta method. By considering the inertia of the connecting rod, the influence of the longitudinal and horizontal profiles of piston skirt, the offset of the piston pin, and the thermal deformation on the secondary motion and lubrication performance is investigated. The parabolic longitudinal profile, the smaller top radial reduction and ellipticities of the middle-convex piston, and the bigger bottom radial reduction and ellipticities can effectively reduce the secondary displacement and velocity, the skirt thrust, friction, and the friction power loss. The results show that the connecting rod inertia, piston skirt profile, and thermal deformation have important influence on secondary motion and lubrication performance of the piston.

Development of a Piston Secondary Motion Model for Skirt Friction Analysis

2012 ◽  
Author(s):  
Ozgur Gunelsu ◽  
Ozgen Akalin
Keyword(s):  
Operating Conditions ◽  
Design Parameters ◽  
Asperity Contact ◽  
Motion Model ◽  
Film Rupture ◽  
Time Step ◽  
Elastic Deformations ◽  
Oil Film ◽  
Piston Skirt ◽  
Secondary Motion

A comprehensive piston skirt lubrication and secondary motion model that can be used for piston friction simulations was developed based on Greenwood and Tripp’s surface asperity contact model and Patir and Cheng’s modified Reynolds equation with surface flow factors. Oil flow between the skirt-liner clearances was modeled and hydrodynamic and asperity contact pressures around the skirt were calculated. Reynolds boundary conditions were applied to determine the film rupture boundaries and wetted areas. Surface roughness and roughness orientation were included in the model. Due to its important effect on pressure development in the oil film, change in the skirt profile due to elastic deformations was taken into account. Change of the skirt profile due to piston thermal expansion is also calculated using the steady-state temperature distribution of the piston corresponding to the investigated engine running conditions. A piston stiffness matrix obtained by finite element analysis was used to determine the elastic deformations of the piston skirt under the calculated oil film pressures. A two-degree-of-freedom system is formed with the forces and moments calculated by the lubrication model. These forces and moments require a coupled solution with piston position. This is achieved by applying an iterative numerical procedure based on Broyden’s scheme which seeks force and moment balance at each iteration phase making use of time step variation. The effects of various engine operating conditions and piston design parameters on piston secondary motion were investigated. Piston skirt friction force due to hydrodynamic shear forces and metal-to-metal contact is calculated.

Impact of the Piston Secondary Motion on its Slap Force

2014 ◽  
Vol 553 ◽  
pp. 582-587
Author(s):  
Bao Cheng Zhang ◽  
Tong Li ◽  
Hai Fei Zhan ◽  
Yuan Tong Gu
Keyword(s):  
Theoretical Model ◽  
Boundary Conditions ◽  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Cylinder Liner ◽  
Internal Combustion ◽  
Lubricating Oil ◽  
Actual Condition ◽  
Piston Skirt ◽  
Secondary Motion

A theoretical model is developed for the analysis of piston secondary motion. Based on this model, the slap force of a specific L6 diesel engine was compared when considering different boundary conditions, such as lubricating oil on cylinder liner, surface roughness, deformation of cylinder liner and piston skirt. It is concluded that it is necessary to consider the secondary motion of piston in the analysis of the inner excitation for an internal combustion engine. A more comprehensive consideration of the boundary condition (i.e., more close to the actual condition) will lead to a smaller maximum slap force, and among all boundary conditions considered in this paper, the structural deformation of the piston skirt and cylinder liner is the most influential factor. The theoretical model developed and findings obtained in this study will benefit the future analysis and design of advanced internal combustion engine structures.

Sign in / Sign up

Export Citation Format

Share Document