scholarly journals Synthesis of Fibrous Complex Structures: Designing Microstructure to Deliver Targeted Macroscale Response

2015 ◽  
Vol 67 (6) ◽  
Author(s):  
Francesco dell'Isola ◽  
David Steigmann ◽  
Alessandro Della Corte
Keyword(s):  
Self Assembly ◽  
New Technologies ◽  
Three Dimensional ◽  
General Interest ◽  
Modeling And Analysis ◽  
Open Questions ◽  
The Status ◽  
Manufacturing Techniques ◽  
Methodological Considerations ◽  
Inextensible Fibers

In Mechanics, material properties are most often regarded as being given, and based on this, many technical solutions are usually conceived and constructed. However, nowadays manufacturing processes have advanced to the point that metamaterials having selected properties can be designed and fabricated. Three-dimensional printing, electrospinning, self-assembly, and many other advanced manufacturing techniques are raising a number of scientific questions which must be addressed if the potential of these new technologies is to be fully realized. In this work, we report on the status of modeling and analysis of metamaterials exhibiting a rich and varied macroscopic response conferred by complex microstructures and particularly focus on strongly interacting inextensible or nearly inextensible fibers. The principal aim is to furnish a framework in which the mechanics of 3D rapid prototyping of microstructured lattices and fabrics can be clearly understood and exploited. Moreover, several-related open questions will be identified and discussed, and some methodological considerations of general interest are provided.

scholarly journals DISCUSSION ON RESTORATION DESIGN OF LANDSCAPE SITE BASED ON 3DTERRESTRIAL LASER SCANNING : A CASE STUDY OF QIWANG HALL IN SUMMER PALACE, BEIJING, CHINA

2019 ◽  
Vol XLII-2/W11 ◽  
pp. 1181-1186
Author(s):  
L. Zhang ◽  
A. Wang
Keyword(s):  
Laser Scanning ◽  
New Technologies ◽  
Three Dimensional ◽  
Heritage Conservation ◽  
Information Collection ◽  
Relevant Research ◽  
The Status ◽  
Summer Palace ◽  
Beijing China

<p><strong>Abstract.</strong> In recent years, new technologies have been developed and applied in the field of heritage conservation, such as Three-dimensional-terrestrial laser scanning (TLS). The academia pays more attention to the heritages which remain relatively intact, but neglects those destroyed. Research on information collection and restoration of sites helps to better protect the damaged sites and deepen people's understanding of the value of heritage. This study will conduct a detailed survey of the status quo of the site, providing basic information for the protection of the site. At the same time, the existing archives and documents are excavated and sorted out, and the restoration research of Qiwang Hall is carried out on the basis of the site and archives, which can make up for the shortcomings of the previous research and provide a reference of methods for the relevant research.</p>

In vitro and in vivo polysaccharides assembly: ultrastructural and cytochemical study of growing plant cell wall components.

1978 ◽  
Vol 36 (2) ◽  
pp. 434-435
Author(s):  
D. Reis ◽  
B. Vian ◽  
J. C. Roland
Keyword(s):  
Cell Wall ◽  
Self Assembly ◽  
Plant Cell Wall ◽  
Higher Plants ◽  
Three Dimensional ◽  
Cytochemical Study ◽  
Wall Components

Wall morphogenesis in higher plants is a problem still open to controversy. Until now the possibility of a transmembrane control and the involvement of microtubules were mostly envisaged. Self-assembly processes have been observed in the case of walls of Chlamydomonas and bacteria. Spontaneous gelling interactions between xanthan and galactomannan from Ceratonia have been analyzed very recently. The present work provides indications that some processes of spontaneous aggregation could occur in higher plants during the formation and expansion of cell wall.Observations were performed on hypocotyl of mung bean (Phaseolus aureus) for which growth characteristics and wall composition have been previously defined.In situ, the walls of actively growing cells (primary walls) show an ordered three-dimensional organization (fig. 1). The wall is typically polylamellate with multifibrillar layers alternately transverse and longitudinal. Between these layers intermediate strata exist in which the orientation of microfibrils progressively rotates. Thus a progressive change in the morphogenetic activity occurs.

Pathways ahead for New Zealand hill country farming

2016 ◽  
Vol 78 ◽  
pp. 73-82 ◽  
Author(s):  
F.G. Scrimgeour
Keyword(s):  
New Zealand ◽  
Rural Communities ◽  
New Technologies ◽  
Service Providers ◽  
Farming Systems ◽  
Hill Country ◽  
The Status ◽  
And Performance ◽  
Hill Farming ◽  
The Hill

This paper provides a stocktake of the status of hill country farming in New Zealand and addresses the challenges which will determine its future state and performance. It arises out of the Hill Country Symposium, held in Rotorua, New Zealand, 12-13 April 2016. This paper surveys people, policy, business and change, farming systems for hill country, soil nutrients and the environment, plants for hill country, animals, animal feeding and productivity, and strategies for achieving sustainable outcomes in the hill country. This paper concludes by identifying approaches to: support current and future hill country farmers and service providers, to effectively and efficiently deal with change; link hill farming businesses to effective value chains and new markets to achieve sufficient and stable profitability; reward farmers for the careful management of natural resources on their farm; ensure that new technologies which improve the efficient use of input resources are developed; and strategies to achieve vibrant rural communities which strengthen hill country farming businesses and their service providers. Keywords: farming systems, hill country, people, policy, productivity, profitability, sustainability

Nanoscale Self-Assembly Using Ion and Electron Beam Techniques: A Rapid Review

MRS Advances ◽  
2020 ◽  
Vol 5 (64) ◽  
pp. 3507-3520
Author(s):  
Chunhui Dai ◽  
Kriti Agarwal ◽  
Jeong-Hyun Cho
Keyword(s):  
Electron Beam ◽  
Self Assembly ◽  
Ion Beam ◽  
Three Dimensional ◽  
The Self ◽  
Stress Generation ◽  
Rapid Review ◽  
High Yield ◽  
3D Nanostructures ◽  
Self Assembled

AbstractNanoscale self-assembly, as a technique to transform two-dimensional (2D) planar patterns into three-dimensional (3D) nanoscale architectures, has achieved tremendous success in the past decade. However, an assembly process at nanoscale is easily affected by small unavoidable variations in sample conditions and reaction environment, resulting in a low yield. Recently, in-situ monitored self-assembly based on ion and electron irradiation has stood out as a promising candidate to overcome this limitation. The usage of ion and electron beam allows stress generation and real-time observation simultaneously, which significantly enhances the controllability of self-assembly. This enables the realization of various complex 3D nanostructures with a high yield. The additional dimension of the self-assembled 3D nanostructures opens the possibility to explore novel properties that cannot be demonstrated in 2D planar patterns. Here, we present a rapid review on the recent achievements and challenges in nanoscale self-assembly using electron and ion beam techniques, followed by a discussion of the novel optical properties achieved in the self-assembled 3D nanostructures.

DEVELOPMENT OF VALUATION METHOD OF THE STATUS OF BASE STATIONS FOR DETERMINING THE NEED OF THEIR UPGRADING

2017 ◽  
pp. 60-70
Author(s):  
Natalya Ivanovna Shaposhnikova ◽  
Alexander Aleksandrovich Sorokin
Keyword(s):  
Decision Making ◽  
Fuzzy Sets ◽  
Cellular Network ◽  
New Technologies ◽  
Base Station ◽  
Base Stations ◽  
Valuation Method ◽  
The Status ◽  
Telecommunications Services ◽  
Theory Of Fuzzy Sets

The article consideres the problems of determining the need to modernize the base stations of the cellular network based on the mathematical apparatus of the theory of fuzzy sets. To improve the quality of telecommunications services the operators should send significant funding for upgrading the equipment of base stations. Modernization can improve and extend the functions of base stations to provide cellular communication, increase the reliability of the base station in operation and the functionality of its individual elements, and reduce the cost of maintenance and repair when working on a cellular network. The complexity in collecting information about the equipment condition is determined by a large number of factors that affect its operation, as well as the imperfection of obtaining and processing the information received. For a comprehensive assessment of the need for modernization, it is necessary to take into account a number of indicators. In the structure of indicators of the need for modernization, there were introduced the parameters reflecting both the degree of aging and obsolescence(the technical gap and the backlog in connection with the emergence of new technologies and standards). In the process of a problem solving, the basic stages of decision-making on modernization have been allocated. Decision-making on the need for modernization is based not only on measuring information that takes into account the decision-makers, but also on linguistic and verbal information. Therefore, to determine the need for upgrading the base stations, the theory of fuzzy sets is used, with the help of which experts can be attracted to this issue. They will be able to formulate additional fuzzy judgments that help to take into account not only measuring characteristics, but also poorly formalized fuzzy information. To do this, the main indicators of the modernization need have been defined, and fuzzy estimates of the need for modernization for all indicators and a set of indicators reflecting the need for upgrading the base stations have been formulated.

SEISMIC VULNERABILITY ASSESSMENT FOR SAN FRANCISCO TEMPLE IN MORELIA, MEXICO

2019 ◽  
Vol 3 (Special Issue on First SACEE'19) ◽  
pp. 207-2016
Author(s):  
Guillermo Martinez ◽  
David Castillo ◽  
José Jara ◽  
Bertha Olmos
Keyword(s):  
San Francisco ◽  
Seismic Vulnerability ◽  
Seismic Analysis ◽  
Three Dimensional ◽  
Middle Part ◽  
Seismic Demands ◽  
Modeling And Analysis ◽  
Seismic Records ◽  
Cracking Pattern ◽  
The Temple

This paper presents a first approximation of the seismic vulnerability of a sixteenth century building which is part of the historical center of Morelia, Mexico. The city was declared World Heritage by United Nations Educational, Scientific and Cultural Organization in 1991. The modeling and analysis of the building was carried out using a three-dimensional elastic tetrahedral finite elements model which was subjected to probabilistic seismic demands with recurrences of 500 yrs and 1000 yrs in addition to real seismic records. The model was able to correctly identify cracking pattern in different parts of the temple due to gravitational forces. High seismic vulnerability of the arched window and the walls of the middle part of the bell tower of the temple was indicated by the seismic analysis of the model.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

scholarly journals 3D Printing of High Viscosity Reinforced Silicone Elastomers

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2239
Author(s):  
Nicholas Rodriguez ◽  
Samantha Ruelas ◽  
Jean-Baptiste Forien ◽  
Nikola Dudukovic ◽  
Josh DeOtte ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
New Technologies ◽  
Three Dimensional ◽  
High Viscosity ◽  
Layer By Layer ◽  
Silicone Elastomers ◽  
Uv Curable ◽  
Octet Truss ◽  
Tunable Mechanical Properties

Recent advances in additive manufacturing, specifically direct ink writing (DIW) and ink-jetting, have enabled the production of elastomeric silicone parts with deterministic control over the structure, shape, and mechanical properties. These new technologies offer rapid prototyping advantages and find applications in various fields, including biomedical devices, prosthetics, metamaterials, and soft robotics. Stereolithography (SLA) is a complementary approach with the ability to print with finer features and potentially higher throughput. However, all high-performance silicone elastomers are composites of polysiloxane networks reinforced with particulate filler, and consequently, silicone resins tend to have high viscosities (gel- or paste-like), which complicates or completely inhibits the layer-by-layer recoating process central to most SLA technologies. Herein, the design and build of a digital light projection SLA printer suitable for handling high-viscosity resins is demonstrated. Further, a series of UV-curable silicone resins with thiol-ene crosslinking and reinforced by a combination of fumed silica and MQ resins are also described. The resulting silicone elastomers are shown to have tunable mechanical properties, with 100–350% elongation and ultimate tensile strength from 1 to 2.5 MPa. Three-dimensional printed features of 0.4 mm were achieved, and complexity is demonstrated by octet-truss lattices that display negative stiffness.

scholarly journals Polymer cyclization for the emergence of hierarchical nanostructures

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Chaojian Chen ◽  
Manjesh Kumar Singh ◽  
Katrin Wunderlich ◽  
Sean Harvey ◽  
Colette J. Whitfield ◽  
...  
Keyword(s):  
Self Assembly ◽  
Three Dimensional ◽  
Hierarchical Structures ◽  
Structural Similarity ◽  
Vital Role ◽  
Nanomaterial Synthesis ◽  
Wide Range ◽  
Linear Poly ◽  
Polymer Folding ◽  
Dynamics Simulations

AbstractThe creation of synthetic polymer nanoobjects with well-defined hierarchical structures is important for a wide range of applications such as nanomaterial synthesis, catalysis, and therapeutics. Inspired by the programmability and precise three-dimensional architectures of biomolecules, here we demonstrate the strategy of fabricating controlled hierarchical structures through self-assembly of folded synthetic polymers. Linear poly(2-hydroxyethyl methacrylate) of different lengths are folded into cyclic polymers and their self-assembly into hierarchical structures is elucidated by various experimental techniques and molecular dynamics simulations. Based on their structural similarity, macrocyclic brush polymers with amphiphilic block side chains are synthesized, which can self-assemble into wormlike and higher-ordered structures. Our work points out the vital role of polymer folding in macromolecular self-assembly and establishes a versatile approach for constructing biomimetic hierarchical assemblies.

scholarly journals Direct Patterning and Spontaneous Self-Assembly of Graphene Oxide via Electrohydrodynamic Jet Printing for Energy Storage and Sensing

Micromachines ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 13 ◽  
Author(s):  
Bin Zhang ◽  
Jaehyun Lee ◽  
Mincheol Kim ◽  
Naeeung Lee ◽  
Hyungdong Lee ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Energy Storage ◽  
Self Assembly ◽  
High Performance ◽  
Three Dimensional ◽  
Chemical Properties ◽  
Layer By Layer ◽  
Energy Storage Devices ◽  
Laminar Structure ◽  
Jet Printing

The macroscopic assembly of two-dimensional materials into a laminar structure has received considerable attention because it improves both the mechanical and chemical properties of the original materials. However, conventional manufacturing methods have certain limitations in that they require a high temperature process, use toxic solvents, and are considerably time consuming. Here, we present a new system for the self-assembly of layer-by-layer (LBL) graphene oxide (GO) via an electrohydrodynamic (EHD) jet printing technique. During printing, the orientation of GO flakes can be controlled by the velocity distribution of liquid jet and electric field-induced alignment spontaneously. Closely-packed GO patterns with an ordered laminar structure can be rapidly realized using an interfacial assembly process on the substrates. The surface roughness and electrical conductivity of the LBL structure were significantly improved compared with conventional dispensing methods. We further applied this technique to fabricate a reduced graphene oxide (r-GO)-based supercapacitor and a three-dimensional (3D) metallic grid hybrid ammonia sensor. We present the EHD-assisted assembly of laminar r-GO structures as a new platform for preparing high-performance energy storage devices and sensors.

Sign in / Sign up

Export Citation Format

Share Document