Engine Performance Characteristics Under Controlled Engine Temperature With Variable Operating Parameters

2011 ◽  
Author(s):  
R. K. Mandloi ◽  
A. Rehman
Keyword(s):  
Fuel Consumption ◽  
Engine Speed ◽  
Engine Performance ◽  
Specific Fuel Consumption ◽  
Exhaust Emission ◽  
Full Potential ◽  
Emission Standard ◽  
Engine Load ◽  
Gasoline Engines ◽  
Brake Power

In the present scenario, the designs of S I engine being used in automotives by various manufacturers are not properly suitable to Indian climate condition. India is among those tropical countries where the variation in the temperature is having very vast range i.e. from 0°C to 50°C in various regions of the country. Looking in to this vast varying temperature range, it is very difficult to say that which temperature is most suited for operating condition of engines and will give the best performance levels as far as SFC & BP is concerned. In this work, it has been tried to investigate the best option to run the SI engine and simultaneously to maintain the emission norms. Today research and development in the field of gasoline engines have to face double challenge; on one hand, fuel consumption has to be reduced, while on the other hand, even more stringent emission standard have to be fulfilled. The development of engines with its complexity of in-cylinder process requires modern developed tools to exploit the full potential in order to reduce fuel consumption. There are many strategies for improving fuel economy and reducing exhaust emission HC & CO. The experimental study is carried out on a three cylinders, four stroke, petrol, carbureted, water cooled engine test rig connected to eddy current type dynamometer. The objective of this work was to examine engine performance parameter i.e. specific fuel consumption (SFC), brake power (BP) and also exhaust emission on Varying Engine Temperature at 50, 60, 70, 80° C and at an engine speed of 1500, 2000, 2500 rpm with respect to engine load 6, 9, 12 kg. The results are shown by various graphs with effect of engine temperature on specific fuel consumption, brake power, engine speed, engine load and emission levels of Nox, HC, CO for gasoline and LPG to improve fuel consumption.

scholarly journals Effect of cetane improver addition into diesel fuel: Methanol mixtures on performance and emissions at different injection pressures

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 555-566 ◽  
Author(s):  
Feyyaz Candan ◽  
Murat Ciniviz ◽  
Ilker Ors
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Exhaust Emission ◽  
Brake Specific Fuel Consumption ◽  
Consumption Values ◽  
Smoke Opacity

In this study, methanol in ratios of 5-10-15% were incorporated into diesel fuel with the aim of reducing harmful exhaust gasses of Diesel engine, di-tertbutyl peroxide as cetane improver in a ratio of 1% was added into mixture fuels in order to reduce negative effects of methanol on engine performance parameters, and isobutanol of a ratio of 1% was used as additive for preventing phase separation of all mixtures. As results of experiments conducted on a single cylinder and direct injection Diesel engine, methanol caused the increase of NOx emission while reducing CO, HC, CO2, and smoke opacity emissions. It also reduced torque and power values, and increased brake specific fuel consumption values. Cetane improver increased torque and power values slightly compared to methanol-mixed fuels, and reduced brake specific fuel consumption values. It also affected exhaust emission values positively, excluding smoke opacity. Increase of injector injection pressure affected performances of methanol-mixed fuels positively. It also increased injection pressure and NOx emissions, while reducing other exhaust emissions.

scholarly journals A Review of Comparative Study on The Effect of Hydroxyl Gas in Internal Combustion Engine (ICE) On Engine Performance and Exhaust Emission

2021 ◽  
Vol 87 (2) ◽  
pp. 1-16
Author(s):  
Amir Ridhuan ◽  
Shahrul Azmir Osman ◽  
Mas Fawzi ◽  
Ahmad Jais Alimin ◽  
Saliza Azlina Osman
Keyword(s):  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Engine Performance ◽  
Internal Combustion ◽  
Exhaust Emission ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Complete Combustion ◽  
Brake Power

This introductory study comes up with an innovative idea of using Hydroxyl gas as a fuel performance enhancer to reduce the natural sources and the overuse of fossil fuel resulting in increased pollution levels. Many researchers have used HHO gas to analyze gasoline and diesel in internal combustion engines. The main challenges of using HHO gas in engines have been identified as system complexity, safety, cost, and electrolysis efficiency. This article focuses on different performance reports and the emission characteristics of a compression ignition engine. As opposed to general diesel, this study found that using HHO gas improved brake power and torque. In all cases, an increase in braking thermal efficiency can be observed. This was due to the presence of hydrogen in HHO gas with higher calorific value than fossil fuels. At the same time, the fuel consumption unit of the engine was reduced, and the combined impact of hydrogen and oxygen helped to achieve complete combustion and improved the combustion capacity of the fuel when HHO gas was injected. The addition of HHO gas also improved the Brake Power (BP), Brake Torque (BT), Brake Specific Fuel Consumption (BSFC), and thermal efficiency while simultaneously reducing CO and HC formation. The rise in CO2 emissions represented the completion of combustion. Therefore, the usage of HHO gas in the Compression Ignition (CI) engine improved the engine performance and exhaust emissions.

scholarly journals TRACTOR’S ENGINE EFFICIENCY AND EXHAUST EMISSIONS’ RESEARCH IN DRILLING WORK

2014 ◽  
Vol 22 (2) ◽  
pp. 141-150 ◽  
Author(s):  
Antanas Juostas ◽  
Algirdas Janulevičius
Keyword(s):  
Fuel Consumption ◽  
Engine Speed ◽  
Fuel Injection ◽  
Exhaust Emissions ◽  
Gear Ratio ◽  
Operating Conditions ◽  
Process Time ◽  
Exhaust Emission ◽  
Drilling Process ◽  
Engine Load

Tis paper provides an overview of possibilities for determining tractor’s engine load, fuel consumption and exhaust emissions in real operating conditions. Theuse of accumulated database in tractor’s electronic control modules for the analysis of engine load, fuel consumption and exhaust emissions is analysed. The methodology for analysis of engine power, speed and exhaust emissions’ dependencies, also for analysis of engine exhaust emissions is presented. Tis paper presents testing results of the unit combined of tractor “Massey Ferguson MF 6499” and drilling machine “Vaderstad Rapid” by engine load, fuel consumption and exhaust emissions. Drilling process time, engine load, fuel consumption and exhaust emission components’ distribution are presented in different engine speed and cyclic fuel injection modes. Test results are analysed separately for technological drilling and work processes at the headland. In the technological process of drilling, if the tractor engine speed and, correspondingly, the transmission gear ratio were reduced to get the set working speed, fuel consumption decreased, CO and CO2 emissions varied slightly, but the NOx increased significantly. Significant part of exhaust emissions occurred at headlands. The conclusion is that the fuel consumption and exhaust emissions, including harmful components, can be reduced only by complex optimization of technological processes and tractor operating modes.

PENGARUH PEMAKAIAN BAHAN BAKAR BENSIN PREMIUM DAN PERTAMAX TERHADAP TORSI, DAYA EFEKTIF DAN SFCe PADA MOTOR BENSIN EMPAT LANGKAH EMPAT SILINDER

2011 ◽  
Vol 1 (1) ◽  
Author(s):  
I Made Nuarsa
Keyword(s):  
Air Pollution ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Major Effect ◽  
Specific Fuel Consumption ◽  
Pollution Level ◽  
Fuel Quality ◽  
Effective Power ◽  
Brake Power ◽  
High Octane

Fuel quality had a major effect on improvement of the engine performance. One of the reason is the engine performance to get off is detonation occurs in the combustion chamber. To support this effort is by using high octane fuel as Pertamax. By using those fuel, it is expected to economize the fuel consumption and reduces air pollution level. There by the improvement of the engine performance is expected to be happening.  This research was done to analyse the effect of premium and pertamax consumption in terms of torque, effective power and specific fuel consumption effective (SFCe) on Daihatsu Feroza engine 1589 cc. The instrument for measuring the torque of engine were trommel and brake power system by using brake material that adopts brake prony system.  The experiment was done at wide open throttle (WOT) at fourth transmission at 1600 rpm, 2100 rpm, 2600 rpm, 3100 rpm, and 3600 rpm.  The experiment result was gained maximum of torque, effective power and specific fuel consumption effective (SFCe) to premium gasoline RON 88 at 3600 rpm severally is 12,92 Kg.m, 64,93 PS and 0,10 L/PS.jam and to pertamax gasoline RON 92 severally is 13,52 Kg.m, 67,97 PS and 0,09 L/PS.jam. Average increasing of torque and effective power equal to 6,52% and 6,79%. While the average degradation of spesific fuel consumption effective (SFCe) equal to 16,18%.

Two-Stroke Marine Diesel Engine Variable Injection Timing System Performance Evaluation and Optimum Setting for Minimum Fuel Consumption at Acceptable NOx Levels

2014 ◽  
Author(s):  
Dimitrios T. Hountalas ◽  
Spiridon Raptotasios ◽  
Antonis Antonopoulos ◽  
Stavros Daniolos ◽  
Iosif Dolaptzis ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Nox Emissions ◽  
Pressure Measurements ◽  
Cylinder Pressure ◽  
Start Of Injection

Currently the most promising solution for marine propulsion is the two-stroke low-speed diesel engine. Start of Injection (SOI) is of significant importance for these engines due to its effect on firing pressure and specific fuel consumption. Therefore these engines are usually equipped with Variable Injection Timing (VIT) systems for variation of SOI with load. Proper operation of these systems is essential for both safe engine operation and performance since they are also used to control peak firing pressure. However, it is rather difficult to evaluate the operation of VIT system and determine the required rack settings for a specific SOI angle without using experimental techniques, which are extremely expensive and time consuming. For this reason in the present work it is examined the use of on-board monitoring and diagnosis techniques to overcome this difficulty. The application is conducted on a commercial vessel equipped with a two-stroke engine from which cylinder pressure measurements were acquired. From the processing of measurements acquired at various operating conditions it is determined the relation between VIT rack position and start of injection angle. This is used to evaluate the VIT system condition and determine the required settings to achieve the desired SOI angle. After VIT system tuning, new measurements were acquired from the processing of which results were derived for various operating parameters, i.e. brake power, specific fuel consumption, heat release rate, start of combustion etc. From the comparative evaluation of results before and after VIT adjustment it is revealed an improvement of specific fuel consumption while firing pressure remains within limits. It is thus revealed that the proposed method has the potential to overcome the disadvantages of purely experimental trial and error methods and that its use can result to fuel saving with minimum effort and time. To evaluate the corresponding effect on NOx emissions, as required by Marpol Annex-VI regulation a theoretical investigation is conducted using a multi-zone combustion model. Shop-test and NOx-file data are used to evaluate its ability to predict engine performance and NOx emissions before conducting the investigation. Moreover, the results derived from the on-board cylinder pressure measurements, after VIT system tuning, are used to evaluate the model’s ability to predict the effect of SOI variation on engine performance. Then the simulation model is applied to estimate the impact of SOI advance on NOx emissions. As revealed NOx emissions remain within limits despite the SOI variation (increase).

Characteristics of Water-in-Diesel Emulsions in a Single Cylinder Compression Ignition Engine

2014 ◽  
Author(s):  
Teja Gonguntla ◽  
Robert Raine ◽  
Leigh Ramsey ◽  
Thomas Houlihan
Keyword(s):  
Fuel Consumption ◽  
Direct Injection ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Compression Ignition Engine ◽  
Oil Emulsion ◽  
Single Cylinder ◽  
Performance And Emission

The objective of this project was to develop both engine performance and emission profiles for two test fuels — a 6% water-in-diesel oil emulsion (DOE-6) fuel and a neat diesel (D100) fuel. The testing was performed on a single cylinder, direct-injection, water-cooled diesel engine coupled to an eddy current dynamometer. Output parameters of the engine were used to calculate Brake Specific Fuel Consumption (BSFC) and Engine Efficiency (η) for each test fuel. DOE-6 fuels generated a 24% reduction in NOX and a 42% reduction in Carbon Monoxide emissions over the tested operating conditions. DOE-6 fuels presented higher ignition delays — between 1°-4°, yielded 1%–12% lower peak cylinder pressures and produced up to 5.5% lower exhaust temperatures. Brake Specific Fuel consumption increased by 6.6% for the DOE-6 fuels as compared to the D100 fuels. This project is the first research done by a New Zealand academic institution on water-in-diesel emulsion fuels.

Optimization of Turbofan Propulsion Cycle Using a Genetic Algorithm

2010 ◽  
Author(s):  
Adel Ghenaiet
Keyword(s):  
Genetic Algorithm ◽  
Fuel Consumption ◽  
Pressure Ratio ◽  
Engine Performance ◽  
Optimization Procedure ◽  
Specific Fuel Consumption ◽  
High Mass ◽  
Design Parameters ◽  
Inlet Temperature ◽  
Simplifying Assumptions

This paper presents an evolutionary approach as the optimization framework to design for the optimal performance of a high-bypass unmixed turbofan to match with the power requirements of a commercial aircraft. The parametric analysis had the objective to highlight the effects of the principal design parameters on the propulsive performance in terms of specific fuel consumption and specific thrust. The design optimization procedure based on the genetic algorithm PIKAIA coupled to the developed engine performance analyzer (on-design and off-design) aimed at finding the propulsion cycle parameters minimizing the specific fuel consumption, while meeting the required thrusts in cruise and takeoff and the restrictions of temperatures limits, engine size and weight as well as pollutants emissions. This methodology does not use engine components’ maps and operates on simplifying assumptions which are satisfying the conceptual or early design stages. The predefined requirements and design constraints have resulted in an engine with high mass flow rate, bypass ratio and overall pressure ratio and a moderate turbine inlet temperature. In general, the optimized engine is fairly comparable with available engines of equivalent power range.

scholarly journals Control of Exhaust Emissions Using Piston Coating on Two-StrokeSI Engines with Gasoline Blends

2021 ◽  
Vol 8 (1) ◽  
pp. H16-H20
Author(s):  
A.V.N.S. Kiran ◽  
B. Ramanjaneyulu ◽  
M. Lokanath M. ◽  
S. Nagendra ◽  
G.E. Balachander
Keyword(s):  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Specific Fuel Consumption ◽  
Thermal Barrier ◽  
Piston Crown ◽  
Barrier Coating

An increase in fuel utilization to internal combustion engines, variation in gasoline price, reduction of the fossil fuels and natural resources, needs less carbon content in fuel to find an alternative fuel. This paper presents a comparative study of various gasoline blends in a single-cylinder two-stroke SI engine. The present experimental investigation with gasoline blends of butanol and propanol and magnesium partially stabilized zirconium (Mg-PSZ) as thermal barrier coating on piston crown of 100 µm. The samples of gasoline blends were blended with petrol in 1:4 ratios: 20 % of butanol and 80 % of gasoline; 20 % of propanol and 80 % of gasoline. In this work, the following engine characteristics of brake thermal efficiency (BTH), specific fuel consumption (SFC), HC, and CO emissions were measured for both coated and non-coated pistons. Experiments have shown that the thermal efficiency is increased by 2.2 % at P20. The specific fuel consumption is minimized by 2.2 % at P20. Exhaust emissions are minimized by 2.0 % of HC and 2.4 % of CO at B20. The results strongly indicate that the combination of thermal barrier coatings and gasoline blends can improve engine performance and reduce exhaust emissions.

scholarly journals Rancang Bangun dan Pengujian Penghalang Heliks sebagai Pencampur Udara-Biogas pada Motor Otto

2021 ◽  
Vol 8 (3) ◽  
pp. 89-96
Author(s):  
Herbert Hasudungan Siahaan ◽  
Armansyah H Tambunan ◽  
Desrial ◽  
Soni Solistia Wirawan
Keyword(s):  
Fuel Consumption ◽  
Performance Test ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Specific Fuel Consumption ◽  
Combustion Reaction ◽  
Otto Cycle ◽  
Direct Use ◽  
Engine Power

A helical barrier as air-biogas mixing device was designed and tested for direct use of biogas from digester in otto cycle generator set. Homogeneity of the air-fuel mixture can give better combustion reaction and increase engine power. The design was based on simulation, which shows that a 0.039 m length of helical barrier gave a 5% increase in power compared to non-helical barrier. Likewise, the simulations also showed that the helical barrier reduced specific fuel consumption (SFC) by 8%. Accordingly, the mixer with helical barrier was designed, and fabricated. Its performance test confirms the improvement resulted by using helical barriers as air-biogas mixer in the engine. The experiment showed that the power increased by 5% when using helical barrier, while SFC decreased by 4.5%. It is concluded that the helical barrier can increase the homogeneity of the mixture resulting in better engine performance. Besides, emissions produced from the engine using a helical barrier also decreased.

Performance Analysis and Improvement Approach of HEV Extended Expansion Gasoline Engine

2011 ◽  
Vol 317-319 ◽  
pp. 1999-2006
Author(s):  
Yu Wan ◽  
Ai Min Du ◽  
Da Shao ◽  
Guo Qiang Li
Keyword(s):  
Mathematical Model ◽  
Performance Analysis ◽  
Fuel Consumption ◽  
Economic Performance ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Valve Train ◽  
Gasoline Engines ◽  
Simulation Results ◽  
Negative Impacts

According to the boost mathematical model verified by experiments, the valve train of traditional gasoline engine is optimized and improved to achieve extended expansion cycle. The simulation results of extended expansion gasoline engine shows that the extended expansion gasoline engine has a better economic performance, compared to traditional gasoline engines. The average brake special fuel consumption (BSFC) can reduce 22.78 g / kW•h by LIVC, but the negative impacts of extended expansion gasoline engine restrict the potential of extended expansion gasoline engine. This paper analyzes the extended expansion gasoline engine performance under the influence of LIVC, discusses the way to further improve extended expansion gasoline engine performance.

Sign in / Sign up

Export Citation Format

Share Document