Modified Equation to Predict Leak/Rupture Criteria for Axially Through-Wall Notched X80 and X100 Linepipes Having Higher Charpy Energy

2004 ◽  
Author(s):  
Shinobu Kawaguchi ◽  
Naoto Hagiwara ◽  
Mitsuru Ohata ◽  
Masao Toyoda
Keyword(s):  
Fracture Toughness ◽  
Flow Stress ◽  
Pipe Material ◽  
Test Results ◽  
Absorbed Energy ◽  
Bending Tests ◽  
Full Scale Tests ◽  
Hoop Stresses ◽  
The Relationship ◽  
Modified Equation

A method of predicting the leak/rupture criteria for API 5L X80 and X100 linepipes was evaluated, based on the results of hydrostatic full-scale tests for X60, X65, X80 and X100 linepipes with an axially through-wall (TW) notch. The TW notch test results clarified the leak/rupture criteria, that is, the relationship between the initial notch lengths and the maximum hoop stresses during the TW notch tests. The obtained leak/rupture criteria were then compared to the prediction of the Charpy V-notch (CVN) absorbed energy-based equation, which has been proposed by Kiefner et al. The comparison revealed that the CVN-based equation was not applicable to the pipes having a CVN energy (Cv) greater than 130 J and flow stress greater than X65. In order to predict the leak/rupture criteria for these linepipes, the static absorbed energy for ductile cracking, (Cvs)i, was introduced as representing the fracture toughness of a pipe material. The (Cvs)i value was determined from the microscopic observation of the cut and buffed Charpy V-notch specimens after static 3-point bending tests. The CVN energy in the original CVN-based equation was replaced by an equivalent CVN energy, (Cv)eq’ which was defined as follows: (Cv)eq = 4.5 (Cvs)i. The leak/rupture criteria for the X80 and X100 linepipes with higher CVN energies were reasonably predicted by the modified equation using the (Cvs)i value.

Modified Equation To Predict Leak/Rupture Criteria For Axially Through-Wall Notched X80 and X100 Linepipes Having a Higher Charpy Energy

2005 ◽  
Vol 128 (4) ◽  
pp. 572-580 ◽  
Author(s):  
Shinobu Kawaguchi ◽  
Naoto Hagiwara ◽  
Mitsuru Ohata ◽  
Masao Toyoda
Keyword(s):  
Fracture Toughness ◽  
Pipe Material ◽  
Test Results ◽  
Absorbed Energy ◽  
Bending Tests ◽  
Three Point Bending ◽  
Full Scale Tests ◽  
Hoop Stresses ◽  
The Relationship ◽  
Modified Equation

A method of predicting the leak/rupture criteria for API 5L X80 and X100 line pipes was evaluated based on the results of hydrostatic full-scale tests for X60, X65, X80, and X100 line pipes with an axially through-wall (TW) notch. The TW notch test results defined the leak/rupture criteria, that is, the relationship between the initial notch lengths and the maximum hoop stresses during the TW notch tests. The defined leak/rupture criteria were then compared to the prediction of the Charpy V-notch (CVN) absorbed energy-based equation, which has been proposed by Kiefner, Maxey et al. This comparison revealed that the CVN-based equation was not applicable to the pipes having both a CVN energy greater than 120 or 130 J and flow stress greater than the level of X65. In order to predict the leak/rupture criteria for these line pipes, the static absorbed energy for ductile cracking, (Cvs)i, was introduced as representing the fracture toughness of a pipe material. The (Cvs)i value was determined from the microscopic observation of the cut and polished Charpy V-notch specimens after static three-point bending tests. The CVN energy in the original CVN-based equation was replaced by an equivalent CVN energy, (Cv)eq, which was defined as follows: (Cv)eq=4.5(Cvs)i. The leak/rupture criteria for the X80 and X100 line pipes with higher CVN energies were reasonably predicted by the modified equation using the (Cvs)i value.

Problematic Internet Use digunakan Ketika Kesepian pada Remaja

2020 ◽  
Vol 14 (1) ◽  
pp. 45-60
Author(s):  
Yashinta Yashinta ◽  
Dwi Hurriyati
Keyword(s):  
Internet Use ◽  
Hypothesis Test ◽  
Problematic Internet Use ◽  
Coefficient Of Determination ◽  
Test Results ◽  
Research Subjects ◽  
Significance Level ◽  
Relationship Of ◽  
The Relationship ◽  
Effective Contribution

This study aims to determine the relationship of loneliness with problematic internet use on boarding students on Silaberanti street in Siantan jaya Opposite Ulu 1 Palembang city. Research subjects numbered 220 people using random sampling methods. Data was collected using a 60 item problematic internet use scale and a 60 item loneliness. Realibility is generated on scale of problematic internet use of 0,955 and loneliness of 0,946.Hypothesis testing uses product moment correlation analysis techniques. Hypothesis test results showed a positive relationshif between loneliness with problematic internet use on boarding students on Silaberanti street in Siantan jaya Opposite Ulu 1 Palembang city r= 0,684 with a significance level of 0,000 (p<0,01). Loneliness in this study made an effective contribution of 46,8% to problematic internet use which can be seen from the coefficient of determination (r²) that is equel to 0,468.

Sunlight exposure: the effects on the performance of paragliding fabric

2018 ◽  
Vol 69 (05) ◽  
pp. 381-389
Author(s):  
MENGÜÇ GAMZE SÜPÜREN ◽  
TEMEL EMRAH ◽  
BOZDOĞAN FARUK
Keyword(s):  
Mechanical Properties ◽  
Aging Process ◽  
Air Permeability ◽  
Sunlight Exposure ◽  
Test Results ◽  
Coating Materials ◽  
Strength Tests ◽  
Before And After ◽  
The Relationship ◽  
Dark Blue

This study was designed to explore the relationship between sunlight exposure and the mechanical properties of paragliding fabrics which have different colors, densities, yarn counts, and coating materials. This study exposed 5 different colors of paragliding fabrics (red, turquoise, dark blue, orange, and white) to intense sunlight for 150 hours during the summer from 9:00 a.m. to 3:00 p.m. for 5 days a week for 5 weeks. Before and after the UV radiation aging process, the air permeability, tensile strength, tear strength, and bursting strength tests were performed. Test results were also evaluated using statistical methods. According to the results, the fading of the turquoise fabric was found to be the highest among the studied fabrics. It was determined that there is a significant decrease in the mechanical properties of the fabrics after sunlight exposure. After aging, the fabrics become considerably weaker in the case of mechanical properties due to the degradation in both the dyestuff and macromolecular structure of the fiber

Adolescent smoking behavior and communication with parents: Depression as a mediator and gender as a moderator

2019 ◽  
Vol 47 (10) ◽  
pp. 1-9 ◽  
Author(s):  
Xieping Chen ◽  
Qian Xie ◽  
Yuting Yang
Keyword(s):  
Smoking Behavior ◽  
Depression Scale ◽  
Epidemiological Studies ◽  
Adolescent Smoking ◽  
Junior High Schools ◽  
Test Results ◽  
Negative Effect ◽  
And Gender ◽  
The Relationship ◽  
Communication Scale

Parent–adolescent communication is assumed to be an important factor affecting adolescent smoking behavior. However, the inner mechanism accounting for this association has still not been clarified in research. Our purpose in this study was to examine the relationships between parent–adolescent communication, adolescent smoking behavior, and depression, as well as gender differences in the relationship between depression and adolescent smoking behavior. Participants were 1,134 students at 6 junior high schools in China who completed the Parent-Adolescent Communication Scale, the Epidemiological Studies Depression Scale, and the Smoking Behavior Test. Results showed that parent-adolescent communication had a significant negative effect on adolescent smoking behavior and depression partially mediated the relationship between parent–adolescent communication and adolescent smoking behavior. In addition, gender moderated the relationship between depression and adolescent smoking behavior. Overall, these findings may help to promote better understanding of the relationship between parent–adolescent communication and adolescent smoking behavior.

scholarly journals Certification tests of a protective device such as ROPS to ensure safe usage of tractors

2018 ◽  
Vol 224 ◽  
pp. 02061
Author(s):  
Irina Troyanovskaya ◽  
Anton Kalugin
Keyword(s):  
Strain Curve ◽  
Protective Device ◽  
Test Results ◽  
Experimental Procedure ◽  
Structure Deformation ◽  
Safety Requirements ◽  
Performance Check ◽  
Protective Structures ◽  
Full Scale Tests ◽  
Tractor Plant

According to the safety requirements, all protective devices of tractor units are subject to obligatory certification. One of the main means of protecting the operator during overturning is ROPS system. In accordance with GOST (National State Standard), a performance check of ROPS protective structures is carried out on basis of full-scale tests. The purpose of the presented study is to develop the experimental procedure and to obtain the performance check result of ROPS protective device of the tractor unit’s cabin using B10 bulldozer manufactured by the Chelyabinsk Tractor Plant as an example. The tests were carried out at the Ural Test Center NATI. For this purpose, a special bedplate was used, allowing to test the protective cabins of tractors with the total mass of up to 110 tons. The hydraulic system of the bedplate allowed to carry out the process of lateral loading of ROPS step by step, where each step corresponded to the 10 mm structure deformation. The applied load and structure deformation were recorded at each step. The energy accumulated by the structure was calculated as the area under the stress-strain curve. The energy U = 40867 J, which was required according to GOST, was accumulated during lateral deformation Δ = 270 mm. The force constituted Fy = 243 kN. After removing the lateral load, the structure was subjected to the vertical static and longitudinal loading. During the whole experiment of ROPS protective device, repairs, deformation corrections and adjustments were not allowed. The test results of ROPS structure of B10 bulldozer cabin showed compliance with the GOST safety requirements. During ROPS deformation, penetration of the protective structure elements into the driver’s limited zone was not observed.

A Study on Estimation of Internal Pressure Creep Life Using Small Punch Creep (SPC) Tests for Boiler Pipes

2009 ◽  
Author(s):  
Toshimi Kobayashi ◽  
Toru Izaki ◽  
Junichi Kusumoto ◽  
Akihiro Kanaya
Keyword(s):  
Internal Pressure ◽  
Residual Life ◽  
Test Results ◽  
Creep Life ◽  
Creep Tests ◽  
Good Correspondence ◽  
Small Punch ◽  
Uniaxial Creep ◽  
Wide Range ◽  
The Relationship

The small punch creep (SPC) test is possible to predict residual creep life at a high accuracy. But, the results of SPC tests cannot be compared with uniaxial creep or internal pressure creep results directly. In this report, the relationship between SPC test results and uniaxial creep test results in ASME A335 P11 (1.25Cr-0.5Mo Steel) was studied. The obtained relationship between SPC load and equivalent uniaxial creep stress formed a simple linear equation under the wide range of test temperature and test period. Then, the SPC results can be compared with uniaxial results by converting SPC loads to the equivalent uniaxial creep stresses. The relationship between SPC test results and internal pressure creep tests results was also studied. The internal creep life of as-received P11 pipe was almost same as SPC result when the hoop stress was converted to the SPC load. The creep lives of internal pressure creep influenced materials also showed good correspondence with SPC results. Therefore SPC can estimate the residual life of internal pressure creep influenced materials.

Experimental Investigation on Relative Crack Length For Fracture Toughness of Concrete

2010 ◽  
Vol 146-147 ◽  
pp. 1524-1528 ◽  
Author(s):  
Xue Zhi Wang ◽  
Zong Chao Xu ◽  
Zhong Bi ◽  
Hao Wang
Keyword(s):  
Fracture Toughness ◽  
Experimental Investigation ◽  
Crack Length ◽  
Fracture Toughness Test ◽  
Test Results ◽  
Toughness Test ◽  
Wedge Splitting Test ◽  
Splitting Test ◽  
Wedge Splitting

The wedge splitting test specimens with three series of different relative crack length were used to study the influences of relative crack length on the fracture toughness of common concrete. The suitable formulation for fracture toughness of concrete with different relative crack length was gotten on comparing between fracture toughness test results and computation results of the model developed from Hu formula.

Size Effect on Mechanical Properties of LVL

2014 ◽  
Vol 887-888 ◽  
pp. 824-829
Author(s):  
Qing Fang Lv ◽  
Ji Hong Qin ◽  
Ran Zhu
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Size Effect ◽  
Tensile Test ◽  
Compression Test ◽  
Test Results ◽  
Laminated Veneer Lumber ◽  
Object Of Study ◽  
The Relationship

Laminated veneer lumber is taken as an object of study, and use LVL specimens of different sizes for compression test and tensile test. The goal of the experiment is to investigate the size effect on compressive strength and tensile strength as well as the influence of the secondary glued laminated face, which appears in the secondary molding processes. The results show that both compressive strength and tensile strength have the size effect apparently and the existence of the secondary glued laminated face lower the compressive strength of LVL specimens. Afterwards, the relationship between compressive strength and volume along with tensile strength and area are obtained by the test results.

Sign in / Sign up

Export Citation Format

Share Document