Vessel Power Prediction and Its Impact on Emission Inventory

2009 ◽  
Author(s):  
Fangfang Wang ◽  
Han P. Bao
Keyword(s):  
Emission Inventory ◽  
Measurement Data ◽  
Cost Effective ◽  
Weather Conditions ◽  
Power Prediction ◽  
Power Requirement ◽  
Time Saving ◽  
Power Estimate ◽  
Propulsion Power ◽  
Vessel Speed

Current practice of emission estimate for ocean-going vessels largely relies on the conventional propeller law for determining power consumption. This practice tends to underestimate the actual emission when sea states and winds are ignored. This paper presents an evaluation of two approaches on the prediction of power of a container vessel. The first approach estimates vessel power as a function of the vessel speed according to the propeller law. While the propeller law approach is cost-effective and time-saving in computing vessel propulsion power, it generally under-estimates vessel propulsion power due to the omission of many other influencing factors including vessel course, engine model, ocean states and weather conditions. The second approach derives vessel propulsion power as a function of the vessel speed and resistance forces. The propulsion power required for a particular vessel behavior is determined based on vessel towing resistance, added resistance from waves and winds, and a variety of propeller and hull dependent efficiencies. Because of the incorporation of external factors, this approach should be more accurate than the propeller law in reflecting the actual vessel power requirement. Comparative analysis is conducted among the two estimate results and real measurement data on engine power output. The results clearly show that power estimated from the propeller law underestimate the vessel propulsion power and the gap increases much faster for higher vessel speeds. Power estimate from the second approach provides more accurate results as they greatly match the measured power values. The ups and downs of the prediction results precisely reflect real power variation along with speed changes. Improved power prediction leads to more reliable emission inventory calculation. However, the improvement of accuracy should be balanced with the increased requirement on data sources and computing efforts.

E-Voting Kepala Desa dan Modal Sosial

2019 ◽  
Vol 2 (6) ◽  
pp. 759
Author(s):  
Khaulah Afifah ◽  
Lala M Kolopaking ◽  
Zessy Ardinal Barlan
Keyword(s):  
Social Capital ◽  
Random Sampling ◽  
Qualitative Data ◽  
Sampling Technique ◽  
Cost Effective ◽  
Simple Random Sampling ◽  
Community Based ◽  
Time Saving ◽  
The Social ◽  
Voting System

Head of a village election with e-voting system is a new thing for community The success level of e-voting system can be reached by fulfil several principles in order to the implementation going effective and the result of the election can be accepted by all. The objectives of this research is to analyze the relation between the success level of e-voting system with social capital of the community. This research is carried out with the quantitative approach and supported by qualitative data. This research takes 60 respondents using simple random sampling technique. The results showed that the success level of e-voting has a correlation with the level of social capital of the community. Based on the field study, the social capital of the community is classified as high. The high social capital makes the implementation of e-voting successful and the success level is also high, because in the election ten years ago occurred a conflict. The community considers e-voting easier and more practical, cost effective and time-saving, and the results of e-voting are also reliable. A practical and fast of e-voting system can be a solution especially for “rural-urban” community who are busy or work outside the village.Keywords: E-voting, the success level of the system, social capital Pemilihan kepala desa dengan sistem e-voting merupakan hal yang baru bagi masyarakat. Keberhasilan penerapan sistem e-voting dilihat dari terpenuhinya beberapa prinsip agar penerapannya berlangsung efektif dan hasilnya dapat diterima oleh seluruh masyarakat. Penelitian ini bertujuan untuk menganalisis hubungan tingkat keberhasilan sistem e-voting dalam pemilihan kepala desa dengan tingkat modal sosial masyarakat. Bentuk penelitian ini adalah penelitian kuantitatif yang didukung oleh analisis data kualitatif. Penelitian ini mengambil enam puluh responden dengan teknik simple random sampling. Hasil penelitian menunjukkan bahwa tingkat keberhasilan e-voting memiliki hubungan dengan tingkat modal sosial masyarakat. Berdasarkan kajian di lapang, modal sosial masyarakat tergolong tinggi. Tingginya modal sosial tersebut membuat pelaksanaan e-voting berhasil dan tingkat keberhasilannya juga tergolong tinggi karena pada pemilihan sepuluh tahun silam sempat terjadi konflik. Masyarakat menganggap sistem evoting lebih mudah dan praktis, hemat dalam segi biaya dan waktu, serta hasil dari pemilihan juga dapat dipertanggungjawabkan. Sistem e-voting yang praktis dan cepat dapat menjadi solusi khususnya bagi masyarakat daerah “desa-kota” yang memiliki kesibukan atau pekerjaan di luar desa.Kata Kunci: E-voting, keberhasilan sistem, modal sosial. 

Kinetic Behaviour of Amylase According to pH: A New Perspective for Starch Hydrolysis Process

2020 ◽  
Vol 16 (2) ◽  
pp. 135-144
Author(s):  
Ravneet K. Grewal ◽  
Baldeep Kaur ◽  
Gagandeep Kaur
Keyword(s):  
Metal Ions ◽  
Competitive Inhibition ◽  
Deae Cellulose ◽  
Kinetic Studies ◽  
Cost Effective ◽  
Starch Hydrolysis ◽  
Divalent Metal Ions ◽  
Activity Data ◽  
Time Saving ◽  
Alkaline Conditions

Background: Amylases are the most widely used biocatalysts in starch saccharification and detergent industries. However, commercially available amylases have few limitations viz. limited activity at low or high pH and Ca2+ dependency. Objective: The quest for exploiting amylase for diverse applications to improve the industrial processes in terms of efficiency and feasibility led us to investigate the kinetics of amylase in the presence of metal ions as a function of pH. Methods: The crude extract from soil fungal isolate cultures is subjected to salt precipitation, dialysis and DEAE cellulose chromatography followed by amylase extraction and is incubated with divalent metal ions (i.e., Ca2+, Fe2+, Cu2+, and Hg2+); Michaelis-Menton constant (Km), and maximum reaction velocity (Vmax) are calculated by plotting the activity data obtained in the absence and presence of ions, as a function of substrate concentration in Lineweaver-Burk Plot. Results: Kinetic studies reveal that amylase is inhibited un-competitively at 5mM Cu2+ at pH 4.5 and 7.5, but non-competitively at pH 9.5. Non-competitive inhibition of amylase catalyzed starch hydrolysis is observed with 5mM Hg2+ at pH 9.5, which changes to mixed inhibition at pH 4.5 and 7.5. At pH 4.5, Ca2+ induces K- and V-type activation of amylase catalyzed starch hydrolysis; however, the enzyme has V-type activation at 7mM Ca2+ under alkaline conditions. Also, K- and V-type of activation of amylase is observed in the presence of 7mM Fe2+ at pH 4.5 and 9.5. Conclusion: These findings suggest that divalent ions modulation of amylase is pH dependent. Furthermore, a time-saving and cost-effective solution is proposed to overcome the challenges of the existing methodology of starch hydrolysis in starch and detergent industries.

Erbium/Ytterbium-Doped Waveguide Amplifier (EYDWA) for extended reach of Wavelength Division Multiplexing based free space optics system (WDM/FSO)

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Bentahar Attaouia ◽  
Kandouci Malika ◽  
Ghouali Samir
Keyword(s):  
Wavelength Division Multiplexing ◽  
Free Space ◽  
Cost Effective ◽  
Weather Conditions ◽  
Free Space Optical ◽  
Wavelength Division ◽  
Space Optics ◽  
Effective Implementation ◽  
Transmission Distance ◽  
The Cost

AbstractThis work is focused to carry out the investigation of wavelength division multiplexing (WDM) approach on free space optical (FSO) transmission systems using Erbium Ytterbium Doped Waveguide Amplifier (EYDWA) integrated as post-or pre-amplifier for extending the reach to 30 Km for the cost-effective implementation of FSO system considering weather conditions. Furthermore, the performance of proposed FSO-wavelength division multiplexing (WDM) system is also evaluated on the effect of varying the FSO range and results are reported in terms of Q factor, BER, and eye diagrams. It has been found that, under clear rain the post-amplification was performed and was able to reach transmission distance over 27 Km, whereas, the FSO distance has been limited at 19.5 Km by using pre-amplification.

A revised FMEA application to the quality control management

2014 ◽  
Vol 31 (7) ◽  
pp. 788-810 ◽  
Author(s):  
Claudia Paciarotti ◽  
Giovanni Mazzuto ◽  
Davide D’Ettorre
Keyword(s):  
Quality Control ◽  
Failure Modes ◽  
Cost Effective ◽  
Weight Functions ◽  
Time Saving ◽  
Content Type ◽  
Complete Procedure ◽  
Medium Enterprise ◽  
Control Management ◽  
Critical Situations

Purpose – The purpose of this paper is to propose a cost-effective, time-saving and easy-to-use failure modes and effects analysis (FMEA) system applied on the quality control of supplied products. The traditional FMEA has been modified and adapted to fit the quality control features and requirements. The paper introduces a new and revised FMEA approach, where the “failure concept” has been modified with “defect concept.” Design/methodology/approach – The typical FMEA parameters have been modified, and a non-linear scale has been introduced to better evaluate the FMEA parameters. In addition, two weight functions have been introduced in the risk priority number (RPN) calculus in order to consider different critical situations previously ignored and the RPN is assigned to several similar products in order to reduce the problem of complexity. Findings – A complete procedure is provided in order to assist managers in deciding on the critical suppliers, the creation of homogeneous families overcome the complexity of single product code approach, in RPN definition the relative importance of factors is evaluated. Originality/value – This different approach facilitates the quality control managers acting as a structured and “friendly” decision support system: the quality control manager can easily evaluate the critical situations and simulate different scenarios of corrective actions in order to choose the best one. This FMEA technique is a dynamic tool and the performed process is an iterative one. The method has been applied in a small medium enterprise producing hydro massage bathtub, shower, spas and that commercializes bathroom furniture. The firm application has been carried out involving a cross-functional and multidisciplinary team.

A Novel Nonsurgical Technique for Correcting Congenital Auricular Anomalies

2021 ◽  
Author(s):  
Shay I. Duvdevani ◽  
Hadas Knoller ◽  
Noa Rozendorn ◽  
Eran E. Alon ◽  
Ory Madgar
Keyword(s):  
Treatment Initiation ◽  
Neonatal Period ◽  
Cost Effective ◽  
Normal Appearance ◽  
Time Saving ◽  
Effective Time ◽  
Custom Made ◽  
The Mean ◽  
Ear Anomalies ◽  
Surgical Corrections

AbstractCongenital ear anomalies are associated with psychological morbidity. Ear deformities can usually be corrected by nonsurgical techniques such as splinting or molding in the neonatal period, initiated before 6 weeks. Without early corrections, many will require otoplasty during childhood. We introduce a novel silicone-based custom mold technique for congenital ear anomalies. The highly malleable silicone was pushed into every part of the auricle, enabling the auricle to remain in the desired shape, with new molds made weekly. Of 31 newborns (18 males, 13 females), 54 ears were treated. Average age at treatment initiation was 26.8 days. The mean treatment duration was 43.2 days, with a median of 28 days. Normal appearance and parent's satisfaction were achieved in 30 patients with 49 deformed ears and also in four newborns older than 6 weeks. Three concha type microtia in two patients achieved great improvements and parents' satisfaction. No complications were reported. Marked aesthetic improvements and normal appearance were achieved for all deformed auricles treated, and improvements in the concha type microtia will partially alleviate future surgical corrections. The results are not inferior to other techniques. The advantages are as follows: cost-effective, time-saving, simple to master, no need for hair shaving, and easy use for parents. Patients older than 6 weeks of age achieved normal auricle appearance, enabling the correction in older newborns. Custom made silicone auricle molding offers a simple nonsurgical technique for correcting congenital ear anomalies, alleviating the need for future surgical corrections.

An efficient solution for the single-step synthesis of 4CaO·Al2O3·Fe2O3 powders

2009 ◽  
Vol 24 (1) ◽  
pp. 245-252 ◽  
Author(s):  
Robert Ianoş
Keyword(s):  
Combustion Synthesis ◽  
Solution Combustion Synthesis ◽  
Cost Effective ◽  
Fuel Mixture ◽  
Single Step ◽  
Combustion Reaction ◽  
Exothermic Effect ◽  
Solution Combustion ◽  
Time Saving ◽  
X Ray

Single-phase nanocrystalline 4CaO·Al2O3·Fe2O3 powders were prepared directly from the combustion reaction using a new cost-effective, time-saving, and environmentally friendly version of solution combustion synthesis. Instead of a single fuel, a fuel mixture of urea and β-alanine was used. It was shown by x-ray diffraction, energy-dispersive x-ray analysis, thermogravimetric analysis, and optical microscopy that this new version of the solution combustion synthesis allows the maximization of the exothermic effect associated with the combustion reaction. On the other hand, it was shown that the traditional version of combustion synthesis involving the use of a single fuel, such as urea or β-alanine, does not ensure the formation of Ca4Al2Fe2O10 unless subsequent thermal treatments are applied. It was suggested that the occurrence of combustion reactions cannot be regarded only in terms of adiabatic temperature, as the kinetic aspects overrule the thermodynamic ones.

scholarly journals Efficient central heating and modern heat sources

2013 ◽  
Vol 7 (4) ◽  
pp. 28-33
Author(s):  
Monika Pawlita
Keyword(s):  
Energy Saving ◽  
Calorific Value ◽  
Cost Effective ◽  
Weather Conditions ◽  
Heating System ◽  
Heat Pumps ◽  
Single Family ◽  
Heating Source ◽  
The Cost ◽  
Family House

Background: The methods of heating houses with system components determine the energy-saving systems. Energy-saving solutions allow to maintain comfortable conditions in the house, while minimizing the cost associated with its operation and at the same time helping to protect natural environment. The examples of such solutions include condensing boilers, heat pumps and solar collectors.Material and methods: The object of the analysis in this paper is typical single-family house occupying the area of 150 m². The comparison of analyzed heating system for a single-family house, including modern energy sources, allows the assessment of the most cost-effective method of heating. Results: Choosing rational method of heating for a single-family house is dictated mainly by economic reasons. The efficiency of the heating sources is also very important. In addition, an important factor is a heating period, which depends on the weather conditions in a given year.Conclusions: The costs of fuel/energy are still growing. Fuel selection is determined mainly by fuel calorific value and the price. To select the type of the heating source one must take into account the cost of kWh of heat.

Use of EcoTILLING to identify natural allelic variants of rice candidate genes involved in salinity tolerance

2011 ◽  
Vol 9 (2) ◽  
pp. 300-304 ◽  
Author(s):  
S. Negrão ◽  
C. Almadanim ◽  
I. Pires ◽  
K. L. McNally ◽  
M. M. Oliveira
Keyword(s):  
Salt Tolerance ◽  
Salinity Tolerance ◽  
Regulation Of Gene Expression ◽  
Cost Effective ◽  
Potential Contribution ◽  
Nucleotide Polymorphisms ◽  
Time Saving ◽  
Allelic Variants ◽  
Small Indels ◽  
Stress Signal

Rice is a salt-sensitive species with enormous genetic variation for salt tolerance hidden in its germplasm pool. The EcoTILLING technique allows us to assign haplotypes, thus reducing the number of accessions to be sequenced, becoming a cost-effective, time-saving and high-throughput method, ideal to be used in laboratories with limited financial resources. Aiming to find alleles associated with salinity tolerance, we are currently using the EcoTILLING technique to detect single nucleotide polymorphisms (SNPs) and small indels across 375 germplasm accessions representing the diversity available in domesticated rice. We are targeting several genes known to be involved in salt stress signal transduction (OsCPK17) or tolerance mechanisms (SalT). So far, we found a total of 15 and 23 representative SNPs or indels in OsCPK17 and SalT, respectively. These natural allelic variants are mostly located in 3′-untranslated region, thus opening a new path for studying their potential contribution to the regulation of gene expression and possible role in salt tolerance.

Sign in / Sign up

Export Citation Format

Share Document