Visible blind photodetector based on room temperature grown ZNO nanospikes array

2012 ◽  
Author(s):  
Soumen Maiti ◽  
Uday N. Maiti ◽  
Kalyan K. Chattopadhyay
Keyword(s):  
Room Temperature ◽  
Visible Blind

scholarly journals Room-temperature photodetectors and VOC sensors based on graphene oxide–ZnO nano-heterojunctions

Nanoscale ◽  
2019 ◽  
Vol 11 (47) ◽  
pp. 22932-22945 ◽  
Author(s):  
Eleonora Pargoletti ◽  
Umme H. Hossain ◽  
Iolanda Di Bernardo ◽  
Hongjun Chen ◽  
Thanh Tran-Phu ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Room Temperature ◽  
Uv Light ◽  
Temperature Sensing ◽  
Visible Blind ◽  
Volatile Biomarkers

Here, we show 3D nanoarchitectures comprising integrated GO–ZnO heterojunctions for either room temperature sensing of ppb volatile biomarkers or response to UV light, showcasing their applicability as chemoresistors and visible-blind photodetectors.

scholarly journals High-Sensitivity Visible-Blind AlGaN Photodiodes and Photodiode Arrays

2000 ◽  
Vol 5 (S1) ◽  
pp. 35-41 ◽  
Author(s):  
J.D. Brown ◽  
J. Matthews ◽  
S. Harney ◽  
J. Boney ◽  
J.F. Schetzina ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Spectral Region ◽  
Room Temperature ◽  
High Sensitivity ◽  
Digital Cameras ◽  
Photodiode Arrays ◽  
Visible Blind ◽  
Backside Illuminated

Visible-blind UV cameras based on a 32 × 32 array of backside-illuminated GaN/AlGaN p-i-n photodiodes have been successfully demonstrated. The photodiode arrays were hybridized to silicon readout integrated circuits (ROICs) using In bump bonds. Output from the UV cameras were recorded at room temperature at frame rates of 30−240 Hz. These new visible-blind digital cameras are sensitive to radiation from 285−365 nm in the UV spectral region.

scholarly journals Visible-Blind UV Digital Camera Based On a 32 × 32 Array of GaN/AlGaN p-i-n Photodiodes

1999 ◽  
Vol 4 (1) ◽  
Author(s):  
J.D. Brown ◽  
Zhonghai Yu ◽  
J. Matthews ◽  
S. Harney ◽  
J. Boney ◽  
...  
Keyword(s):  
Integrated Circuit ◽  
Room Temperature ◽  
Digital Camera ◽  
Frame Rate ◽  
Readout Integrated Circuit ◽  
Type Layer ◽  
New Type ◽  
Photodiode Array ◽  
P Type ◽  
Visible Blind

A visible-blind UV camera based on a 32 × 32 array of backside-illuminated GaN/AlGaN p-i-n photodiodes has been successfully demonstrated. Each of the 1024 photodiodes in the array consists of a base n-type layer of AlGaN (~20%) onto which an undoped GaN layer followed by a p-type GaN layer is deposited by metallorganic vapor phase epitaxy. Double-side polished sapphire wafers are used as transparent substrates. Standard photolithographic, etching, and metallization procedures were employed to obtain fully-processed devices. The photodiode array was hybridized to a silicon readout integrated circuit using In bump bonds. Output from the UV camera was recorded at room temperature at a frame rate of 30 Hz. This new type of visible-blind digital camera is sensitive to radiation from 320 nm to 365 nm in the UV spectral region.

High-Sensitivity Visible-Blind AlGaN Photodiodes and Photodiode Arrays

1999 ◽  
Vol 595 ◽  
Author(s):  
J.D. Brown ◽  
J. Matthews ◽  
S. Harney ◽  
J. Boney ◽  
J.F. Schetzina ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Spectral Region ◽  
Room Temperature ◽  
High Sensitivity ◽  
Digital Cameras ◽  
Photodiode Arrays ◽  
Visible Blind ◽  
Backside Illuminated

AbstractVisible-blind UV cameras based on a 32 × 32 array of backside-illuminated GaN/AlGaN p-i-n photodiodes have been successfully demonstrated. The photodiode arrays were hybridized to silicon readout integrated circuits (ROICs) using In bump bonds. Output from the UV cameras were recorded at room temperature at frame rates of 30-240 Hz. These new visible-blind digital cameras are sensitive to radiation from 285-365 nm in the UV spectral region.

Dependence of Intergranular Fracture on Boundary Topography and Cohesion

1973 ◽  
Vol 31 ◽  
pp. 150-151
Author(s):  
J. E. Doherty ◽  
A. F. Giamei ◽  
B. H. Kear ◽  
C. W. Steinke
Keyword(s):  
Grain Boundary ◽  
Room Temperature ◽  
Nickel Base Superalloy ◽  
Boundary Shear ◽  
Room Temperature Ductility ◽  
Solid Solution Matrix ◽  
Nickel Base ◽  
Solution Matrix ◽  
Different Levels ◽  
Base Superalloy

Recently we have been investigating a class of nickel-base superalloys which possess substantial room temperature ductility. This improvement in ductility is directly related to improvements in grain boundary strength due to increased boundary cohesion through control of detrimental impurities and improved boundary shear strength by controlled grain boundary micros true tures.For these investigations an experimental nickel-base superalloy was doped with different levels of sulphur impurity. The micros tructure after a heat treatment of 1360°C for 2 hr, 1200°C for 16 hr consists of coherent precipitates of γ’ Ni3(Al,X) in a nickel solid solution matrix.

Hepatocyte Alterations in Guinea Pigs FED Polychlorinated Biphenyls (PCBs), Dibenzodioxins (PCDD), AND DIBENZOFURANS (PCDF)

1982 ◽  
Vol 40 ◽  
pp. 56-57
Author(s):  
J. N. Turner ◽  
D. N. Collins
Keyword(s):  
Guinea Pigs ◽  
Room Temperature ◽  
Dose Group ◽  
Methyl Cellulose ◽  
Uranyl Acetate ◽  
Target Organ ◽  
Office Building ◽  
Lead Citrate ◽  
Control Groups ◽  
Cooling Fluid

A fire involving an electric service transformer and its cooling fluid, a mixture of PCBs and chlorinated benzenes, contaminated an office building with a fine soot. Chemical analysis showed PCDDs and PCDFs including the highly toxic tetra isomers. Guinea pigs were chosen as an experimental animal to test the soot's toxicity because of their sensitivity to these compounds, and the liver was examined because it is a target organ. The soot was suspended in 0.75% methyl cellulose and administered in a single dose by gavage at levels of 1,10,100, and 500mgm soot/kgm body weight. Each dose group was composed of 6 males and 6 females. Control groups included 12 (6 male, 6 female) animals fed activated carbon in methyl cellulose, 6 males fed methyl cellulose, and 16 males and 10 females untreated. The guinea pigs were sacrificed at 42 days by suffocation in CO2. Liver samples were immediately immersed and minced in 2% gluteraldehyde in cacadylate buffer at pH 7.4 and 4°C. After overnight fixation, samples were postfixed in 1% OsO4 in cacodylate for 1 hr at room temperature, embedded in epon, sectioned and stained with uranyl acetate and lead citrate.

Domain Formation in Synthetic Quartz

1971 ◽  
Vol 29 ◽  
pp. 156-157
Author(s):  
Joseph J. Comer
Keyword(s):  
Electron Beam ◽  
Room Temperature ◽  
Domain Formation ◽  
Synthetic Quartz ◽  
Transmission Electron ◽  
Black Spots ◽  
Diffraction Mode ◽  
Domain Boundaries ◽  
Kikuchi Lines ◽  
Straight Lines

Domains visible by transmission electron microscopy, believed to be Dauphiné inversion twins, were found in some specimens of synthetic quartz heated to 680°C and cooled to room temperature. With the electron beam close to parallel to the [0001] direction the domain boundaries appeared as straight lines normal to <100> and <410> or <510> directions. In the selected area diffraction mode, a shift of the Kikuchi lines was observed when the electron beam was made to traverse the specimen across a boundary. This shift indicates a change in orientation which accounts for the visibility of the domain by diffraction contrast when the specimen is tilted. Upon exposure to a 100 KV electron beam with a flux of 5x 1018 electrons/cm2sec the boundaries are rapidly decorated by radiation damage centers appearing as black spots. Similar crystallographio boundaries were sometimes found in unannealed (0001) quartz damaged by electrons.

A Liquid Nitrogen Cooled Stage for STEM

1974 ◽  
Vol 32 ◽  
pp. 444-445
Author(s):  
Louis T. Germinario
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Liquid Nitrogen ◽  
Room Temperature ◽  
Objective Lens ◽  
Thermal Drift ◽  
Specimen Holder ◽  
Resolution Capability ◽  
Focal Position

A liquid nitrogen stage has been developed for the JEOL JEM-100B electron microscope equipped with a scanning attachment. The design is a modification of the standard JEM-100B SEM specimen holder with specimen cooling to any temperatures In the range ~ 55°K to room temperature. Since the specimen plane is maintained at the ‘high resolution’ focal position of the objective lens and ‘bumping’ and thermal drift la minimized by supercooling the liquid nitrogen, the high resolution capability of the microscope is maintained (Fig.4).

Cryogenic atomic force microscopy

1991 ◽  
Vol 49 ◽  
pp. 54-55
Author(s):  
K. A. Fisher ◽  
M. G. L. Gustafsson ◽  
M. B. Shattuck ◽  
J. Clarke
Keyword(s):  
Room Temperature ◽  
Rapid Freezing ◽  
Cryogenic Temperatures ◽  
Soft Or ◽  
Electrically Conductive ◽  
Force Microscopy ◽  
Flexible Molecules ◽  
Advantages And Disadvantages ◽  
Atomic Force ◽  
Chemical Perturbation

The atomic force microscope (AFM) is capable of imaging electrically conductive and non-conductive surfaces at atomic resolution. When used to image biological samples, however, lateral resolution is often limited to nanometer levels, due primarily to AFM tip/sample interactions. Several approaches to immobilize and stabilize soft or flexible molecules for AFM have been examined, notably, tethering coating, and freezing. Although each approach has its advantages and disadvantages, rapid freezing techniques have the special advantage of avoiding chemical perturbation, and minimizing physical disruption of the sample. Scanning with an AFM at cryogenic temperatures has the potential to image frozen biomolecules at high resolution. We have constructed a force microscope capable of operating immersed in liquid n-pentane and have tested its performance at room temperature with carbon and metal-coated samples, and at 143° K with uncoated ferritin and purple membrane (PM).

Benzylamine Tartrate as an Organic Glass Substrate for Carbon Films by Evaporation

1970 ◽  
Vol 28 ◽  
pp. 484-485
Author(s):  
A. C. Faberge
Keyword(s):  
Vapor Pressure ◽  
Viscous Liquid ◽  
Glass Substrate ◽  
Room Temperature ◽  
Carbon Film ◽  
Carbon Films ◽  
Organic Glass ◽  
Spectroscopic Examination ◽  
Polymeric Substrates

Benzylamine tartrate (m.p. 63°C) seems to be a better and more convenient substrate for making carbon films than any of those previously proposed. Using it in the manner described, it is easy consistently to make batches of specimen grids as open as 200 mesh with no broken squares, and without individual handling of the grids. Benzylamine tartrate (hereafter called B.T.) is a viscous liquid when molten, which sets to a glass. Unlike polymeric substrates it does not swell before dissolving; such swelling of the substrate seems to be a principal cause of breakage of carbon film. Mass spectroscopic examination indicates a vapor pressure less than 10−9 Torr at room temperature.

Sign in / Sign up

Export Citation Format

Share Document