MXene artificial muscles based on ionically cross-linked Ti3C2Tx electrode for kinetic soft robotics

2019 ◽  
Vol 4 (33) ◽  
pp. eaaw7797 ◽  
Author(s):  
Sima Umrao ◽  
Rassoul Tabassian ◽  
Jaehwan Kim ◽  
Van Hiep Nguyen ◽  
Qitao Zhou ◽  
...  
Keyword(s):  
Structural Reliability ◽  
Artificial Muscle ◽  
Response Speed ◽  
Input Voltage ◽  
Artificial Muscles ◽  
Wearable Electronics ◽  
Bending Strain ◽  
Kinetic Art ◽  
Robotic Devices ◽  
Soft Actuators

Existing ionic artificial muscles still require a technology breakthrough for much faster response speed, higher bending strain, and longer durability. Here, we report an MXene artificial muscle based on ionically cross-linked Ti3C2Tx with poly(3,4 ethylenedioxythiophene)-poly(styrenesulfonate), showing ultrafast rise time of within 1 s in DC responses, extremely large bending strain up to 1.37% in very low input voltage regime (0.1 to 1 V), long-term cyclic stability of 97% up to 18,000 cycles, markedly reduced phase delay, and very broad frequency bandwidth up to 20 Hz with good structural reliability without delamination under continuous electrical stimuli. These artificial muscles were successfully applied to make an origami-inspired narcissus flower robot as a wearable brooch and dancing butterflies and leaves on a tree as a kinetic art piece. These successful demonstrations elucidate the wide potential of MXene-based soft actuators for the next-generation soft robotic devices including wearable electronics and kinetic art pieces.

scholarly journals Dielectric Elastomer Grippers

2021 ◽  
Vol 10 (5) ◽  
pp. 33-36
Author(s):  
Mills Patel ◽  
Rudrax Khamar ◽  
Akshat Shah ◽  
Tej shah ◽  
Bhavik Soneji
Keyword(s):  
Mechanical Properties ◽  
Power Generation ◽  
State Of The Art ◽  
Artificial Muscle ◽  
Dielectric Elastomer ◽  
Soft Robotics ◽  
Artificial Muscles ◽  
Dielectric Elastomer Actuators ◽  
Working Principle ◽  
Soft Actuators

This paper appraisals state-of-the-art dielectric elastomer actuators (DEAs) and their forthcoming standpoints as soft actuators which have freshly been considered as a crucial power generation module for soft robots. DEs behave as yielding capacitors, expanding in area and attenuation in thickness when a voltage is applied. The paper initiates with the explanation of working principle of dielectric elastomer grippers. Here the operation of DEAs include both physics and mechanical properties with its characteristics, we have describe methods for modelling and its introductory application. In inclusion, the artificial muscle based on DEA concept is also formally presented. This paper also elaborates DEAs popular application such as- Soft Robotics, Robotics grippers and artificial muscles.

Modeling, Analysis, and Function Extension of the McKibben Hydraulic Artificial Muscles

2020 ◽  
Author(s):  
Siqing Chen ◽  
He Xu
Keyword(s):  
High Pressure ◽  
Theoretical Analysis ◽  
Artificial Muscle ◽  
Design Parameters ◽  
Artificial Muscles ◽  
Soft Robots ◽  
The Law ◽  
Soft Actuators ◽  
The Impact ◽  
The Relationship

Abstract Compared with rigid robots, flexible robots have soft and extensible bodies enforcing their abilities to absorb shock and vibration, hence reducing the impact of probable collisions. Due to their high adaptability and minimally invasive features, soft robots are used in various fields. The McKibben hydraulic artificial muscles are the most popular soft actuator because of the controllability of hydraulic actuator and high force to weight ratio. When its deformation reaches a certain level, the actuators can be stopped automatically without any other braking mechanism. The research of McKibben hydraulic artificial muscles is beneficial to the theoretical analysis of soft actuators in the mechanical system. The design of soft actuators with different deformations promotes the development of soft robots. In this paper, a static modeling of the McKibben hydraulic artificial muscles is established, and its correctness is verified by theoretical analysis and experiment. In this model, the deformation mechanism of the artificial muscle and the law of output force is put forward. The relationship between muscle pressure, load, deformation, and muscle design parameters is presented through the mechanical analysis of the braid, elastic tube, and sealed-end. The law of the muscle deformation with high pressure is predicted. The reason for the muscle’s tiny elongation with extremely high pressure is found through the analysis of the relationship between the angle of the braid, the length of single braided thread, and the pressure. With the increase of pressure, the angle of the braid tends to a fixed value. As the stress of braided thread increases, so does its length. The length changes obviously when the stress is extremely enormous. The angle of the braid and the length of the braided thread control the deformation of artificial muscles, resulting in a slight lengthening with extreme high pressure. Under normal pressure, the length of the braided wire is negligible, so that the entire muscle becomes shorter. According to the modeling and theoretical analysis, a new McKibben hydraulic artificial muscle that can elongate under normal rising pressure is designed. This artificial muscle can grow longer with pressure increases, eventually reaching its maximum length. During this time, its diameter barely changes. Its access pressure is higher than that of conventional elongated artificial muscles. Through experiments, the relationship between the muscle deformation, pressure, and load still conform to this theoretical model. This model can be used for the control of soft actuators and the design of new soft robots. This extensional McKibben hydraulic artificial muscles and the conventional McKibben hydraulic artificial muscles can be used in the bilateral control of soft robots.

Design, Fabrication and Analysis of a Novel Membrane Dielectric Elastomer In-Plane Actuator

2018 ◽  
Vol 940 ◽  
pp. 101-108 ◽  
Author(s):  
Yun Hua Zhao ◽  
Qiu Hua Gao ◽  
Qi Chang He ◽  
Wen Ming Zhang
Keyword(s):  
Response Speed ◽  
High Energy ◽  
Dielectric Elastomer ◽  
Artificial Muscles ◽  
Nonlinear Dynamic Model ◽  
Material Parameters ◽  
Hard Materials ◽  
Soft Actuators ◽  
Novel Design ◽  
Magnetic Mechanism

The emerging field of soft robots offers the prospective of applying soft actuators as artificial muscles, replacing traditional actuators based on hard materials. Dielectric elastomers (DE), one class of electro-active polymers, represents an attractive technology for the realization of mechatronic actuators, due to their light weight, high energy efficiency and scalability. This work aims at investigating and characterizing a novel design of membrane DE in-plane actuator by magnetic mechanism. A nonlinear dynamic model of the dielectric elastomer actuator (DEA) is established and corresponding material parameters are identified. Natural frequency and response speed of DEAs are studied. It demonstrates that larger stretch and higher response speed can be realized by the proposed DEA.

Hydraulically amplified self-healing electrostatic actuators with muscle-like performance

Science ◽  
2018 ◽  
Vol 359 (6371) ◽  
pp. 61-65 ◽  
Author(s):  
E. Acome ◽  
S. K. Mitchell ◽  
T. G. Morrissey ◽  
M. B. Emmett ◽  
C. Benjamin ◽  
...  
Keyword(s):  
High Speed ◽  
Dielectric Breakdown ◽  
Artificial Muscle ◽  
Robotic Arm ◽  
Soft Robotics ◽  
Self Healing ◽  
Electrostatic Actuators ◽  
Robotic Devices ◽  
Soft Actuators ◽  
Wide Potential

Existing soft actuators have persistent challenges that restrain the potential of soft robotics, highlighting a need for soft transducers that are powerful, high-speed, efficient, and robust. We describe a class of soft actuators, termed hydraulically amplified self-healing electrostatic (HASEL) actuators, which harness a mechanism that couples electrostatic and hydraulic forces to achieve a variety of actuation modes. We introduce prototypical designs of HASEL actuators and demonstrate their robust, muscle-like performance as well as their ability to repeatedly self-heal after dielectric breakdown—all using widely available materials and common fabrication techniques. A soft gripper handling delicate objects and a self-sensing artificial muscle powering a robotic arm illustrate the wide potential of HASEL actuators for next-generation soft robotic devices.

scholarly journals One Soft Step: Bio-Inspired Artificial Muscle Mechanisms for Space Applications

2022 ◽  
Vol 8 ◽  
Author(s):  
Joseph Ashby ◽  
Samuel Rosset ◽  
E.-F. Markus Henke ◽  
Iain A. Anderson
Keyword(s):  
Outer Space ◽  
Artificial Muscle ◽  
Artificial Muscles ◽  
Space Applications ◽  
Soft Robots ◽  
Deformable Bodies ◽  
Low Mass ◽  
Soft Actuators ◽  
The Cost ◽  
High Work

Soft robots, devices with deformable bodies and powered by soft actuators, may fill a hitherto unexplored niche in outer space. All space-bound payloads are heavily limited in terms of mass and volume, due to the cost of launch and the size of spacecraft. Being constructed from stretchable materials allows many possibilities for compacting soft robots for launch and later deploying into a much larger volume, through folding, rolling, and inflation. This morphability can also be beneficial for adapting to operation in different environments, providing versatility, and robustness. To be truly soft, a robot must be powered by soft actuators. Dielectric elastomer transducers (DETs) offer many advantages as artificial muscles. They are lightweight, have a high work density, and are capable of artificial proprioception. Taking inspiration from nature, in particular the starfish podia, we present here bio-inspired inflatable DET actuators powering low-mass robots capable of performing complex motion that can be compacted to a fraction of their operating size.

scholarly journals Development of Soft Pneumatic Actuators Using High-Strain Elastic Materials with Stress Anisotropy of Short Fibers

Proceedings ◽  
2020 ◽  
Vol 64 (1) ◽  
pp. 41
Author(s):  
Akihiro Kojima ◽  
Manabu Okui ◽  
Taro Nakamura
Keyword(s):  
Fiber Type ◽  
Artificial Muscle ◽  
Axial Direction ◽  
Short Fiber ◽  
Working Fluid ◽  
Artificial Muscles ◽  
Rubber Tube ◽  
Fiber Reinforced ◽  
Soft Robots ◽  
Soft Actuators

In recent years, soft robots, such as those with high human affinity and those that excellently imitate the movements of natural creatures, have gained considerable attention. In soft robots, structurally flexible soft actuators need to be used, not conventional motors or hydraulic/pneumatic cylinders. Various types of soft actuators have been developed depending on the driving principle. A pneumatic rubber artificial muscle is a kind of soft actuator that acquires power through injection of a working fluid, such as air, into an elastic structure, such as rubber. In this study, the authors developed an actuator, namely, the straight-fiber-type artificial muscle, which exhibits excellent contraction characteristics. This artificial muscle consists of a rubber tube that contains reinforcing fibers arranged in the axial direction. When air pressure is applied to the rubber tube, the artificial muscle expands only in the radial direction and contracts in the axial direction due to the restraining effect of the reinforcing fiber. While this artificial muscle exhibits excellent contraction properties, it has some drawbacks. One is the difficulty in enclosing the reinforced fibers that have accumulated in the rubber tube, making this artificial muscle difficult to manufacture. In this study, we investigated short-fiber-reinforced artificial muscles that can be easily manufactured. First, a short-fiber-reinforced rubber was prepared, and anisotropy was evaluated via a tensile test. Then, the short-fiber-reinforced artificial muscles were prepared, and their contractions rates were evaluated. The results confirmed that a short-fiber-reinforced rubber can be useful for the manufacture of artificial muscles.

scholarly journals Supramolecular ionic polymer/carbon nanotube composite hydrogels with enhanced electromechanical performance

2020 ◽  
Vol 9 (1) ◽  
pp. 478-488 ◽  
Author(s):  
Yun-Fei Zhang ◽  
Fei-Peng Du ◽  
Ling Chen ◽  
Ka-Wai Yeung ◽  
Yuqing Dong ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Ion Mobility ◽  
Artificial Muscles ◽  
Ionic Polymer ◽  
Composite Hydrogels ◽  
The Matrix ◽  
Electromechanical Performance ◽  
Carbon Nanotube Composite ◽  
Robotic Devices

AbstractElectroactive hydrogels have received increasing attention due to the possibility of being used in biomimetics, such as for soft robotics and artificial muscles. However, the applications are hindered by the poor mechanical properties and slow response time. To address these issues, in this study, supramolecular ionic polymer–carbon nanotube (SIPC) composite hydrogels were fabricated via in situ free radical polymerization. The polymer matrix consisted of carbon nanotubes (CNTs), styrene sulfonic sodium (SSNa), β-cyclodextrin (β-CD)-grafted acrylamide, and ferrocene (Fc)-grafted acrylamide, with the incorporation of SSNa serving as the ionic source. On applying an external voltage, the ions accumulate on one side of the matrix, leading to localized swelling and bending of the structure. Therefore, a controllable and reversible actuation can be achieved by changing the applied voltage. The tensile strength of the SIPC was improved by over 300%, from 12 to 49 kPa, due to the reinforcement effect of the CNTs and the supramolecular host–guest interactions between the β-CD and Fc moieties. The inclusion of CNTs not only improved the tensile properties but also enhanced the ion mobility, which lead to a faster electromechanical response. The presented electro-responsive composite hydrogel shows a high potential for the development of robotic devices and soft smart components for sensing and actuating applications.

Macroporous smart gel based on pH-sensitive polyacrylic polymer for the development of large size artificial muscle with linear contraction

Soft Matter ◽  
2021 ◽  
Author(s):  
Vincent Mansard
Keyword(s):  
Soft Matter ◽  
Artificial Muscle ◽  
Ph Sensitive ◽  
Artificial Muscles ◽  
Linear Contraction ◽  
Large Size ◽  
Polyacrylic Polymer ◽  
The Revolution

The physics of soft matter can contribute to the revolution in robotics and medical prostheses.These two fields requires the development of artificial muscles with behavior close to the biologicalmuscle. Today,...

Multiple Inputs-Single Accumulated Output Mechanism for Soft Linear Actuators

2018 ◽  
Vol 11 (1) ◽  
Author(s):  
Kyeong Ho Cho ◽  
Ho Moon Kim ◽  
Youngeun Kim ◽  
Sang Yul Yang ◽  
Hyouk Ryeol Choi
Keyword(s):  
Artificial Muscle ◽  
Operating Mode ◽  
Robotic Arm ◽  
Soft Actuator ◽  
Wearable Robots ◽  
Working Principle ◽  
Linear Actuators ◽  
Soft Actuators ◽  
Muscle Actuators ◽  
Further Development

Soft linear actuators (SLAs) such as shape memory alloy (SMA) wires, pneumatic soft actuators, dielectric elastomer actuator, and twisted and coiled soft actuator (TCA) called artificial muscle actuators in general, have many advantages over the conventional actuators. SLAs can realize innovative robotic technologies like soft robots, wearable robots, and bionic arms in the future, but further development is still needed in real applications because most SLAs do not provide large displacement or force as needed. This paper presents a novel mechanism supplementing SLAs by accumulating the displacement of multiple SLAs. It adopts the principle of differential gears in reverse. Since the input units of the mechanism are extensible, more displacement can be accumulated by increasing the number of the input units as many as needed. The mechanism is basically used to accumulate displacements, but can be used to accumulate forces by changing its operating mode. This paper introduces the design and working principle of the mechanism and validates its operation experimentally. In addition, the mechanism is implemented on a robotic arm and its effectiveness is confirmed.

scholarly journals Implementation of Soft-Lithography Techniques for Fabrication of Bio-Inspired Multi-Layer Dielectric Elastomer Actuators with Interdigitated Mechanically Compliant Electrodes

Actuators ◽  
2018 ◽  
Vol 7 (4) ◽  
pp. 73 ◽  
Author(s):  
Mert Corbaci ◽  
Wayne Walter ◽  
Kathleen Lamkin-Kennard
Keyword(s):  
Soft Lithography ◽  
Skeletal Muscles ◽  
Actuation Voltage ◽  
Transition Process ◽  
Humanoid Robots ◽  
Dielectric Elastomer ◽  
Industrial Robots ◽  
Artificial Muscles ◽  
Dielectric Elastomer Actuators ◽  
Soft Actuators

Advancements in software engineering have enabled the robotics industry to transition from the use of giant industrial robots to more friendly humanoid robots. Soft robotics is one of the key elements needed to advance the transition process by providing a safer way for robots to interact with the environment. Electroactive polymers (EAPs) are one of the best candidate materials for the next generation of soft robotic actuators and artificial muscles. Lightweight dielectric elastomer actuators (DEAs) provide optimal properties such as high elasticity, rapid response rates, mechanical robustness and compliance. However, for DEAs to become widely used as artificial muscles or soft actuators, there are current limitations, such as high actuation voltage requirements, control of actuation direction, and scaling, that need to be addressed. The authors’ approach to overcome the drawbacks of conventional DEAs is inspired by the natural skeletal muscles. Instead of fabricating a large DEA device, smaller sub-units can be fabricated and bundled together to form larger actuators, similar to the way myofibrils form myocytes in skeletal muscles. The current study presents a novel fabrication approach, utilizing soft lithography and other microfabrication techniques, to allow fabrication of multilayer stacked DEA structures, composed of hundreds of micro-sized DEA units.

Sign in / Sign up

Export Citation Format

Share Document