scholarly journals Rapid Aggregation of Biofuel-Producing Algae by the Bacterium Bacillus sp. Strain RP1137

2013 ◽  
Vol 79 (19) ◽  
pp. 6093-6101 ◽  
Author(s):  
Ryan J. Powell ◽  
Russell T. Hill

ABSTRACTAlgal biofuels represent one of the most promising means of sustainably replacing liquid fuels. However, significant challenges remain before alga-based fuels become competitive with fossil fuels. One of the largest challenges is the ability to harvest the algae in an economical and low-energy manner. In this article, we describe the isolation of a bacterial strain,Bacillussp. strain RP1137, which can rapidly aggregate several algae that are candidates for biofuel production, including aNannochloropsissp. This bacterium aggregates algae in a pH-dependent and reversible manner and retains its aggregation ability after paraformaldehyde fixation, opening the possibility for reuse of the cells. The optimal ratio of bacteria to algae is described, as is the robustness of aggregation at different salinities and temperatures. Aggregation is dependent on the presence of calcium or magnesium ions. The efficiency of aggregation ofNannochloropsis oceanicaIMET1 is between 70 and 95% and is comparable to that obtained by other means of harvest; however, the rate of harvest is fast, with aggregates forming in 30 s.

Author(s):  
Ahmed I. Osman ◽  
Neha Mehta ◽  
Ahmed M. Elgarahy ◽  
Amer Al-Hinai ◽  
Ala’a H. Al-Muhtaseb ◽  
...  

AbstractThe global energy demand is projected to rise by almost 28% by 2040 compared to current levels. Biomass is a promising energy source for producing either solid or liquid fuels. Biofuels are alternatives to fossil fuels to reduce anthropogenic greenhouse gas emissions. Nonetheless, policy decisions for biofuels should be based on evidence that biofuels are produced in a sustainable manner. To this end, life cycle assessment (LCA) provides information on environmental impacts associated with biofuel production chains. Here, we review advances in biomass conversion to biofuels and their environmental impact by life cycle assessment. Processes are gasification, combustion, pyrolysis, enzymatic hydrolysis routes and fermentation. Thermochemical processes are classified into low temperature, below 300 °C, and high temperature, higher than 300 °C, i.e. gasification, combustion and pyrolysis. Pyrolysis is promising because it operates at a relatively lower temperature of up to 500 °C, compared to gasification, which operates at 800–1300 °C. We focus on 1) the drawbacks and advantages of the thermochemical and biochemical conversion routes of biomass into various fuels and the possibility of integrating these routes for better process efficiency; 2) methodological approaches and key findings from 40 LCA studies on biomass to biofuel conversion pathways published from 2019 to 2021; and 3) bibliometric trends and knowledge gaps in biomass conversion into biofuels using thermochemical and biochemical routes. The integration of hydrothermal and biochemical routes is promising for the circular economy.


2021 ◽  
Vol 5 (S1) ◽  
pp. 1295-1301
Author(s):  
K. Ashok ◽  
M. Babu ◽  
S. Anandhi ◽  
G. Padmapriya ◽  
V. Jula

The large application potential of micro-algae in the clean energy, biopharmaceutical and nutraceutical industries have recently drawn a substantial world interest. Biofuels, bioactive pharmaceutical drugs and food additives are organic, natural and economical sources. As biofuels, they have a good cost, renewability or environmental replacement for liquid fossil fuels. Microalges provide productive biomass feedstock for biofuel as demand for biofuels rises worldwide. These resources may be processed into biodiesel with ample supplies of biomass in rural communities. The cultivation of genetically modified algae in recent years has been pursued to promote the marketing of algae. In particular, this would benefit society if linked with a successful policy on algal biofuels and other by-products in the government. In terms of survival of the world's current problems, Algal technologies are a transformative but complementary tool. Algal fuel marketing remains a bottleneck and a threat. It is technically possible to have a big output but it is not economic. This study therefore focuses principally on problems in commercial development of biological microalgae and potential strategies for overcoming this challenge.


2020 ◽  
Vol 63 (4) ◽  
pp. 355-370 ◽  
Author(s):  
Guang Gao ◽  
James Grant Burgess ◽  
Min Wu ◽  
Shujun Wang ◽  
Kunshan Gao

AbstractThe rising global demand for energy and the decreasing stocks of fossil fuels, combined with environmental problems associated with greenhouse gas emissions, are driving research and development for alternative and renewable sources of energy. Algae have been gaining increasing attention as a potential source of bio-renewable energy because they grow rapidly, and farming them does not, generally, compete for agricultural land use. Previous studies of algal biofuels have focused on microalgae because of their fast growth rate and high lipid content. Here we analyze the multiple merits of biofuel production using macroalgae, with particular reference to their chemical composition, biomass and biofuel productivity, and cost-effectiveness. Compared to microalgae, macroalgae have lower growth rates and energy productivity but higher cost-effectiveness. A biomass productivity of over 73.5 t dry mass ha−1 year−1 with a methane yield of 285 m3 t−1 dry mass would make electricity production from macroalgae profitable, and this might be achieved using fast-growing macroalgae, such as Ulva. Taking into account the remediation of eutrophication and CO2, exploring macroalgae for a renewable bioenergy is of importance and feasible.


Author(s):  
Peter Rez

Transportation efficiency can be measured in terms of the energy needed to move a person or a tonne of freight over a given distance. For passengers, journey time is important, so an equally useful measure is the product of the energy used and the time taken for the journey. Transportation requires storage of energy. Rechargeable systems such as batteries have very low energy densities as compared to fossil fuels. The highest energy densities come from nuclear fuels, although, because of shielding requirements, these are not practical for most forms of transportation. Liquid hydrocarbons represent a nice compromise between high energy density and ease of use.


Kybernetes ◽  
2014 ◽  
Vol 43 (1) ◽  
pp. 24-39 ◽  
Author(s):  
Salman Ahmad ◽  
Razman bin Mat Tahar

Purpose – The purpose of this paper is to provide an assessment of Malaysia's renewable capacity target. Malaysia relies heavily on fossil fuels for electricity generation. To diversify the fuel-mix, a technology-specific target has been set by the government in 2010. Considering the complexity in generation expansion, there is a dire need for an assessment model that can evaluate policy in a feedback fashion. The study also aims to expand policy evaluation literature in electricity domain by taking a dynamic systems approach. Design/methodology/approach – System dynamics modelling and simulation approach is used in this study. The model variables, selected from literature, are constituted into casual loop diagram. Later, a stock and flow diagram is developed by integrating planning, construction, operation, and decision making sub-models. The dynamic interactions between the sub-sectors are analysed based on the short-, medium- and long-term policy targets. Findings – Annual capacity constructions fail to achieve short-, medium- and long-term targets. However, the difference in operational capacity and medium- and long-term target are small. In terms of technology, solar photovoltaic (PV) attains the highest level of capacity followed by biomass. Research limitations/implications – While financial calculations are crucial for capacity expansion decisions, currently they are not being modelled; this study primarily focuses on system delays and exogenous components only. Practical implications – A useful model that offers regulators and investors insights on system characteristics and policy targets simultaneously. Originality/value – This paper provides a model for evaluating policy for renewable capacity expansion development in a dynamic context, for Malaysia.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Shahryar Habibi

Purpose The purpose of this study is to design a zero-energy home, which is known to be capable of balancing its own energy production and consumption close to zero. Development of low-energy homes and zero-net energy houses (ZEHs) is vital to move toward energy efficiency and sustainability in the built environment. To achieve zero or low energy targets in homes, it is essential to use the design process that minimizes the need for active mechanical systems. Design/methodology/approach The methodology discussed in this paper consists of an interfacing building information modeling (BIM) tool and a simulation software to determine the potential influence of phase change materials on designing zero-net energy homes. Findings BIM plays a key role in advancing methods for architects and designers to communicate through a common software platform, analyze energy performance through all stages of the design and construction process and make decisions for improving energy efficiency in the built environment. Originality/value This paper reviews the literature relevant to the role of BIM in helping energy simulation for the performance of residential homes to more advanced levels and in modeling the integrated design process of ZEHs.


Significance Its proponents argue that interconnecting the world’s power grids would make it easier for renewable energy, however remotely it is generated, to replace most fossil fuels in electricity generation. Implementation remains a distant, and politically fraught, possibility but regional super-grids look increasingly feasible and could boost the submarine cable industry. Impacts Load-balancing on a global scale could reduce peak load generation needs by an estimated 5-10%, saving billions in investment. Power grids require estimated investment of USD14tn by 2050, nearly as much as projected spending on new renewables capacity. International rules on carbon pricing and taxing would be a prerequisite for a global power grid.


2017 ◽  
Vol 83 (22) ◽  
Author(s):  
Konstantia Gkarmiri ◽  
Shahid Mahmood ◽  
Alf Ekblad ◽  
Sadhna Alström ◽  
Nils Högberg ◽  
...  

ABSTRACT RNA stable isotope probing and high-throughput sequencing were used to characterize the active microbiomes of bacteria and fungi colonizing the roots and rhizosphere soil of oilseed rape to identify taxa assimilating plant-derived carbon following 13CO2 labeling. Root- and rhizosphere soil-associated communities of both bacteria and fungi differed from each other, and there were highly significant differences between their DNA- and RNA-based community profiles. Verrucomicrobia, Proteobacteria, Planctomycetes, Acidobacteria, Gemmatimonadetes, Actinobacteria, and Chloroflexi were the most active bacterial phyla in the rhizosphere soil. Bacteroidetes were more active in roots. The most abundant bacterial genera were well represented in both the 13C- and 12C-RNA fractions, while the fungal taxa were more differentiated. Streptomyces, Rhizobium, and Flavobacterium were dominant in roots, whereas Rhodoplanes and Sphingomonas (Kaistobacter) were dominant in rhizosphere soil. “Candidatus Nitrososphaera” was enriched in 13C in rhizosphere soil. Olpidium and Dendryphion were abundant in the 12C-RNA fraction of roots; Clonostachys was abundant in both roots and rhizosphere soil and heavily 13C enriched. Cryptococcus was dominant in rhizosphere soil and less abundant, but was 13C enriched in roots. The patterns of colonization and C acquisition revealed in this study assist in identifying microbial taxa that may be superior competitors for plant-derived carbon in the rhizosphere of Brassica napus. IMPORTANCE This microbiome study characterizes the active bacteria and fungi colonizing the roots and rhizosphere soil of Brassica napus using high-throughput sequencing and RNA-stable isotope probing. It identifies taxa assimilating plant-derived carbon following 13CO2 labeling and compares these with other less active groups not incorporating a plant assimilate. Brassica napus is an economically and globally important oilseed crop, cultivated for edible oil, biofuel production, and phytoextraction of heavy metals; however, it is susceptible to several diseases. The identification of the fungal and bacterial species successfully competing for plant-derived carbon, enabling them to colonize the roots and rhizosphere soil of this plant, should enable the identification of microorganisms that can be evaluated in more detailed functional studies and ultimately be used to improve plant health and productivity in sustainable agriculture.


Plants ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 463 ◽  
Author(s):  
Ali Nawaz Kumbhar ◽  
Meilin He ◽  
Abdul Razzaque Rajper ◽  
Khalil Ahmed Memon ◽  
Muhammad Rizwan ◽  
...  

The decline in fossil fuel reserves has forced researchers to seek out alternatives to fossil fuels. Microalgae are considered to be a promising feedstock for sustainable biofuel production. Previous studies have shown that urea is an important nitrogen source for cell growth and the lipid production of microalgae. The present study investigated the effect of different concentrations of urea combined with kelp waste extract on the biomass and lipid content of Chlorella sorokiniana. The results revealed that the highest cell density, 20.36 × 107 cells−1, and maximal dry biomass, 1.70 g/L, were achieved in the presence of 0.5 g/L of urea combined with 8% kelp waste extract. Similarly, the maximum chlorophyll a, b and beta carotenoid were 10.36 mg/L, 7.05, and 3.01 mg/L, respectively. The highest quantity of carbohydrate content, 290.51 µg/mL, was achieved in the presence of 0.2 g/L of urea and 8% kelp waste extract. The highest fluorescence intensity, 40.05 × 107 cells−1, and maximum total lipid content (30%) were achieved in the presence of 0.1 g/L of urea and 8% kelp waste extract. The current study suggests that the combination of urea and kelp waste extract is the best strategy to enhance the biomass and lipid content in Chlorella sorokiniana.


2021 ◽  
Vol 87 (6) ◽  
Author(s):  
Katsuya Fuchino ◽  
Helena Chan ◽  
Ling Chin Hwang ◽  
Per Bruheim

ABSTRACT The alphaproteobacterium Zymomonas mobilis exhibits extreme ethanologenic physiology, making this species a promising biofuel producer. Numerous studies have investigated its biology relevant to industrial applications and mostly at the population level. However, the organization of single cells in this industrially important polyploid species has been largely uncharacterized. In the present study, we characterized basic cellular behavior of Z. mobilis strain Zm6 under anaerobic conditions at the single-cell level. We observed that growing Z. mobilis cells often divided at a nonmidcell position, which contributed to variant cell size at birth. However, the cell size variance was regulated by a modulation of cell cycle span, mediated by a correlation of bacterial tubulin homologue FtsZ ring accumulation with cell growth. The Z. mobilis culture also exhibited heterogeneous cellular DNA content among individual cells, which might have been caused by asynchronous replication of chromosome that was not coordinated with cell growth. Furthermore, slightly angled divisions might have resulted in temporary curvatures of attached Z. mobilis cells. Overall, the present study uncovers a novel bacterial cell organization in Z. mobilis. IMPORTANCE With increasing environmental concerns about the use of fossil fuels, development of a sustainable biofuel production platform has been attracting significant public attention. Ethanologenic Z. mobilis species are endowed with an efficient ethanol fermentation capacity that surpasses, in several respects, that of baker’s yeast (Saccharomyces cerevisiae), the most-used microorganism for ethanol production. For development of a Z. mobilis culture-based biorefinery, an investigation of its uncharacterized cell biology is important, because bacterial cellular organization and metabolism are closely associated with each other in a single cell compartment. In addition, the current work demonstrates that the polyploid bacterium Z. mobilis exhibits a distinctive mode of bacterial cell organization, likely reflecting its unique metabolism that does not prioritize incorporation of nutrients for cell growth. Thus, another significant result of this work is to advance our general understanding in the diversity of bacterial cell architecture.


Sign in / Sign up

Export Citation Format

Share Document