scholarly journals The Use of Urea and Kelp Waste Extract is A Promising Strategy for Maximizing the Biomass Productivity and Lipid Content in Chlorella sorokiniana

Plants ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 463 ◽  
Author(s):  
Ali Nawaz Kumbhar ◽  
Meilin He ◽  
Abdul Razzaque Rajper ◽  
Khalil Ahmed Memon ◽  
Muhammad Rizwan ◽  
...  
Keyword(s):  
Lipid Content ◽  
Fossil Fuels ◽  
Fossil Fuel ◽  
Lipid Production ◽  
Total Lipid Content ◽  
Biomass Productivity ◽  
Chlorella Sorokiniana ◽  
Biofuel Production ◽  
Promising Strategy ◽  
Waste Extract

The decline in fossil fuel reserves has forced researchers to seek out alternatives to fossil fuels. Microalgae are considered to be a promising feedstock for sustainable biofuel production. Previous studies have shown that urea is an important nitrogen source for cell growth and the lipid production of microalgae. The present study investigated the effect of different concentrations of urea combined with kelp waste extract on the biomass and lipid content of Chlorella sorokiniana. The results revealed that the highest cell density, 20.36 × 107 cells−1, and maximal dry biomass, 1.70 g/L, were achieved in the presence of 0.5 g/L of urea combined with 8% kelp waste extract. Similarly, the maximum chlorophyll a, b and beta carotenoid were 10.36 mg/L, 7.05, and 3.01 mg/L, respectively. The highest quantity of carbohydrate content, 290.51 µg/mL, was achieved in the presence of 0.2 g/L of urea and 8% kelp waste extract. The highest fluorescence intensity, 40.05 × 107 cells−1, and maximum total lipid content (30%) were achieved in the presence of 0.1 g/L of urea and 8% kelp waste extract. The current study suggests that the combination of urea and kelp waste extract is the best strategy to enhance the biomass and lipid content in Chlorella sorokiniana.

scholarly journals Biomass and lipid induction strategies in microalgae for biofuel production and other applications

2019 ◽  
Vol 18 (1) ◽  
Author(s):  
Hossein Alishah Aratboni ◽  
Nahid Rafiei ◽  
Raul Garcia-Granados ◽  
Abbas Alemzadeh ◽  
José Rubén Morones-Ramírez
Keyword(s):  
Lipid Content ◽  
Large Scale ◽  
Fossil Fuels ◽  
Low Cost ◽  
Lipid Production ◽  
Arable Land ◽  
Economic Cost ◽  
Biofuel Production ◽  
Scale Production ◽  
Microalgae Biomass

Abstract The use of fossil fuels has been strongly related to critical problems currently affecting society, such as: global warming, global greenhouse effects and pollution. These problems have affected the homeostasis of living organisms worldwide at an alarming rate. Due to this, it is imperative to look for alternatives to the use of fossil fuels and one of the relevant substitutes are biofuels. There are different types of biofuels (categories and generations) that have been previously explored, but recently, the use of microalgae has been strongly considered for the production of biofuels since they present a series of advantages over other biofuel production sources: (a) they don’t need arable land to grow and therefore do not compete with food crops (like biofuels produced from corn, sugar cane and other plants) and; (b) they exhibit rapid biomass production containing high oil contents, at least 15 to 20 times higher than land based oleaginous crops. Hence, these unicellular photosynthetic microorganisms have received great attention from researches to use them in the large-scale production of biofuels. However, one disadvantage of using microalgae is the high economic cost due to the low-yields of lipid content in the microalgae biomass. Thus, development of different methods to enhance microalgae biomass, as well as lipid content in the microalgae cells, would lead to the development of a sustainable low-cost process to produce biofuels. Within the last 10 years, many studies have reported different methods and strategies to induce lipid production to obtain higher lipid accumulation in the biomass of microalgae cells; however, there is not a comprehensive review in the literature that highlights, compares and discusses these strategies. Here, we review these strategies which include modulating light intensity in cultures, controlling and varying CO2 levels and temperature, inducing nutrient starvation in the culture, the implementation of stress by incorporating heavy metal or inducing a high salinity condition, and the use of metabolic and genetic engineering techniques coupled with nanotechnology.

Potential of Mixotrophic Cultivation of Chlorella sorokiniana for Biodiesel Production

2013 ◽  
Vol 779-780 ◽  
pp. 1509-1513
Author(s):  
Jing Han Wang ◽  
Hai Zhen Yang ◽  
Feng Wang
Keyword(s):  
Lipid Content ◽  
Synergetic Effect ◽  
Biomass Productivity ◽  
Chlorella Sorokiniana ◽  
Lipid Productivity ◽  
Biodiesel Production ◽  
Biofuel Production ◽  
Mixotrophic Cultivation ◽  
Promising Alternative ◽  
Microalgal Biodiesel

Biodiesel from microalgae provides a promising alternative for biofuel production. Microalgal biodiesel can be produced under three major cultivation modes, namely, photoautotrophic, heterotrophic, and mixotrophic cultivation. Studies of biodiesel production from microalgae have been reported mostly focusing on photoautotrophic cultivation, mixotrophic cultivation has rarely been researched. This paper compared the biomass productivity, lipid content, and lipid productivity ofChlorella sorokinianaunder photoautotrophic, heterotrophic, and mixotrophic cultivation. Glucose was adopted as organic carbon source at five concentrations (0.1, 0.5, 1.0, 2.0, 5.0% glucose w/v). Results displayed that microalgal growth was significantly improved in glucose supplied cultures. Synergetic effect of photoautotrophy and heterotrophy existed in mixotrophic cultivation except for 5.0% culture. Highest biomass productivity of 1.178 g·L-1·d-1and highest lipid productivity of 582 mg·L-1·d-1was observed under mixotrophic cultivation with 2.0% (w/v) glucose addition. Lipid content ofC. sorokinianawas mostly higher in stationary phase than in exponential phase. Highest lipid content of 49.37% was observed in 2.0% mixotrophic culture, followed by 47.09% in 2.0% heterotrophic culture.

scholarly journals A Mathematical Model of Neutral Lipid Content in terms of Initial Nitrogen Concentration and Validation in Coelastrum sp. HA-1 and Application in Chlorella sorokiniana

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Zhenhua Yang ◽  
Yue Zhao ◽  
Zhiyong Liu ◽  
Chenfeng Liu ◽  
Zhipeng Hu ◽  
...  
Keyword(s):  
Protein Synthesis ◽  
Lipid Content ◽  
Lipid Accumulation ◽  
Nitrogen Concentration ◽  
Lipid Production ◽  
Lipid Synthesis ◽  
Quantitative Relationship ◽  
Chlorella Sorokiniana ◽  
High Lipid ◽  
Nitrogen Concentrations

Microalgae are considered to be a potential major biomass feedstock for biofuel due to their high lipid content. However, no correlation equations as a function of initial nitrogen concentration for lipid accumulation have been developed for simplicity to predict lipid production and optimize the lipid production process. In this study, a lipid accumulation model was developed with simple parameters based on the assumption protein synthesis shift to lipid synthesis by a linear function of nitrogen quota. The model predictions fitted well for the growth, lipid content, and nitrogen consumption of Coelastrum sp. HA-1 under various initial nitrogen concentrations. Then the model was applied successfully in Chlorella sorokiniana to predict the lipid content with different light intensities. The quantitative relationship between initial nitrogen concentrations and the final lipid content with sensitivity analysis of the model were also discussed. Based on the model results, the conversion efficiency from protein synthesis to lipid synthesis is higher and higher in microalgae metabolism process as nitrogen decreases; however, the carbohydrate composition content remains basically unchanged neither in HA-1 nor in C. sorokiniana.

scholarly journals A Review of Energy Consumption in the Acquisition of Bio-Feedstock for Microalgae Biofuel Production

2021 ◽  
Vol 13 (16) ◽  
pp. 8873
Author(s):  
Minghao Chen ◽  
Yixuan Chen ◽  
Qingtao Zhang
Keyword(s):  
Energy Consumption ◽  
Large Scale ◽  
Fossil Fuels ◽  
Biomass Concentration ◽  
Biomass Productivity ◽  
Biofuel Production ◽  
Scale Production ◽  
Culture Methods ◽  
Cultivation System ◽  
Cultivation Systems

Microalgae biofuel is expected to be an ideal alternative to fossil fuels to mitigate the effects of climate change and the energy crisis. However, the production process of microalgae biofuel is sometimes considered to be energy intensive and uneconomical, which limits its large-scale production. Several cultivation systems are used to acquire feedstock for microalgal biofuels production. The energy consumption of different cultivation systems is different, and the concentration of culture medium (microalgae cells contained in the unit volume of medium) and other properties of microalgae vary with the culture methods, which affects the energy consumption of subsequent processes. This review compared the energy consumption of different cultivation systems, including the open pond system, four types of closed photobioreactor (PBR) systems, and the hybrid cultivation system, and the energy consumption of the subsequent harvesting process. The biomass concentration and areal biomass production of every cultivation system were also analyzed. The results show that the flat-panel PBRs and the column PBRs are both preferred for large-scale biofuel production for high biomass productivity.

scholarly journals Fast media optimization for mixotrophic cultivation of Chlorella vulgaris

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Valerie C. A. Ward ◽  
Lars Rehmann
Keyword(s):  
Cell Density ◽  
Lipid Content ◽  
Lipid Accumulation ◽  
Accumulation Rate ◽  
Lipid Production ◽  
Total Lipid Content ◽  
Mixotrophic Cultivation ◽  
Cell Weight ◽  
Dry Cell Weight ◽  
Dry Cell

AbstractMicroalgae can accumulate large proportions of their dry cell weight as storage lipids when grown under appropriate nutrient limiting conditions. While a high ratio of carbon to nitrogen is often cited as the primary mode of triggering lipid accumulation in microalgae, fast optimization strategies to increase lipid production for mixotrophic cultivation have been difficult to developed due to the low cell densities of algal cultures, and consequently the limited amount of biomass available for compositional analysis. Response surface methodologies provide a power tool for assessing complex relationships such as the interaction between the carbon source and nitrogen source. A 15 run Box-Behnken design performed in shaker flasks was effective in studying the effect of carbon, nitrogen, and magnesium on the growth rate, maximum cell density, lipid accumulation rate, and glucose consumption rate. Using end-point dry cell weight and total lipid content as assessed by direct transesterification to FAME, numerical optimization resulted in a significant increase in lipid content from 18.5 ± 0.76% to 37.6 ± 0.12% and a cell density of 5.3 ± 0.1 g/L to 6.1 ± 0.1 g/L between the centre point of the design and the optimized culture conditions. The presented optimization process required less than 2 weeks to complete, was simple, and resulted in an overall lipid productivity of 383 mg/L·d.

Using macroalgae as biofuel: current opportunities and challenges

2020 ◽  
Vol 63 (4) ◽  
pp. 355-370 ◽  
Author(s):  
Guang Gao ◽  
James Grant Burgess ◽  
Min Wu ◽  
Shujun Wang ◽  
Kunshan Gao
Keyword(s):  
Cost Effectiveness ◽  
Fossil Fuels ◽  
Agricultural Land ◽  
Biomass Productivity ◽  
Dry Mass ◽  
Biofuel Production ◽  
Electricity Production ◽  
Energy Productivity ◽  
Lower Growth ◽  
Algal Biofuels

AbstractThe rising global demand for energy and the decreasing stocks of fossil fuels, combined with environmental problems associated with greenhouse gas emissions, are driving research and development for alternative and renewable sources of energy. Algae have been gaining increasing attention as a potential source of bio-renewable energy because they grow rapidly, and farming them does not, generally, compete for agricultural land use. Previous studies of algal biofuels have focused on microalgae because of their fast growth rate and high lipid content. Here we analyze the multiple merits of biofuel production using macroalgae, with particular reference to their chemical composition, biomass and biofuel productivity, and cost-effectiveness. Compared to microalgae, macroalgae have lower growth rates and energy productivity but higher cost-effectiveness. A biomass productivity of over 73.5 t dry mass ha−1 year−1 with a methane yield of 285 m3 t−1 dry mass would make electricity production from macroalgae profitable, and this might be achieved using fast-growing macroalgae, such as Ulva. Taking into account the remediation of eutrophication and CO2, exploring macroalgae for a renewable bioenergy is of importance and feasible.

scholarly journals Rapid Lipid Content Screening in Neochloris Oleoabundans by Carbon-Based Dielectrophoresis

2021 ◽  
Vol 4 (1) ◽  
pp. 41
Author(s):  
Cynthia M. Galicia-Medina ◽  
Matías Vázquez-Piñón ◽  
Sergio Camacho-León ◽  
Gibran S. Alemán-Nava ◽  
Roberto C. Gallo-Villanueva ◽  
...  
Keyword(s):  
Lipid Content ◽  
Lipid Production ◽  
Biofuel Production ◽  
Neochloris Oleoabundans ◽  
Atmospheric Concentration ◽  
Machine Material ◽  
Fixation Rate ◽  
Screening Process ◽  
High Lipid

The use of microalgae as a biomass source for biofuel production has drawn the attention of many scientists due to several associated environmental advantages over conventional terrestrial crops, including microalgae growing using wastewaters and a higher CO2 fixation rate, contributing to the reduction of atmospheric concentration. Consequently, a reliable cytoplasmic lipid screening process in microalgae is a valuable asset for harvesting optimization in mass production processes. In this study, the heterogeneous cytoplasmic lipid content of Neochloris oleoabundans was dielectrophoretically assorted in a microfluidic device using castellated carbon microelectrodes. The experiments carried out over a wide frequency window (100 kHz to 30 MHz) at a fixed amplitude of 7 VPP showed a significant contrast between the dielectrophoretic behavior of high lipid content and low lipid content cells at the low frequency range (100–800 kHz). A weak response for the mid and high frequency ranges (1–30 MHz) was also identified for high and low lipid content samples, allowing one to establish an electrokinetic footprint of the studied strain. These results suggest that the development of a reliable screening process for harvesting optimization is possible through a fast and straightforward mechanism, such as dielectrophoresis, which is a low-cost and easy-to-machine material that employs glassy carbon. The experimental setup in this study involved in vitro culturing of nitrogen-replete (N+) and nitrogen-deplete (N-) cell suspensions to promote low and high lipid production in cells, respectively. Cell populations were monitored using spectrophotometry, and the resulting lipid development among cells was quantified by Nile red fluorescence.

scholarly journals Effect of Different Solvent and Ratio Towards Microalgae Oil Production by Ultrasonic Assisted Soxhlet Extraction Techniques

2019 ◽  
Vol 35 (4) ◽  
pp. 1377-1383
Author(s):  
Y.C. Wong ◽  
R. Shahirah
Keyword(s):  
Lipid Content ◽  
Fossil Fuels ◽  
Raw Materials ◽  
Lipid Production ◽  
Soxhlet Extraction ◽  
Oil Production ◽  
Extraction Yield ◽  
Biodiesel Production ◽  
Freshwater Algae ◽  
Algae Oil

Currently, the renewable feedstock is the most needed worldwide. Microalgae are promising raw materials for supplying biofuels due to the depletion of fossil fuels. The microalgae found were mostly consists of freshwater algae. The aim of this research is to study the effect of different solvents and ratio using Soxhlet extraction method. Many parameters were introduced in this study in order to enhance the lipid production of microalgae. Lipid content of algae oil production known as Fatty acid that found was being analyzed. Different solvents used and ratio was expected to have different highest in lipid content. Chloroform, ethanol, and hexane were chosen as the solvents used. The best solvent for lipid production was the combination of different solvents and ratio. Data showed that 8% is the highest total oil extraction yield obtained from combination of chloroform and ethanol with a ratio (1:2). The compound and lipid content in algae oil are analyzed through Gas Chromatography Mass Spectrometer (GC-MS) analysis. Fatty acids have many benefits and also have interest preparation for health products. Green microalgae strain was being identified and cultured as future potential for biodiesel production. Significant of this study is to unveil the benefit of algae oil as sustainable future resources.

scholarly journals Genetic engineering, a hope for sustainable biofuel production: review

2014 ◽  
Vol 3 (2) ◽  
pp. 311-323 ◽  
Author(s):  
Sudip Paudel ◽  
Michael A Menze
Keyword(s):  
Genetic Engineering ◽  
Fossil Fuels ◽  
Genetically Modified Organisms ◽  
Lipid Production ◽  
Genetically Engineered ◽  
Raw Material ◽  
Biofuel Production ◽  
Wild Type ◽  
Environment Friendly ◽  
Genetically Engineered Organisms

The use of recently developed genetic engineering tools in combination with organisms that have the potential to produce precursors for the production of biodiesel, promises a sustainable and environment friendly energy source. Enhanced lipid production in wild type and/or genetically engineered organisms can offer sufficient raw material for industrial transesterification of plant-based triglycerides. Bio-diesel, produced with the help of genetically modified organisms, might be one of the best alternatives to fossil fuels and to mitigate various environmental hazards. DOI: http://dx.doi.org/10.3126/ije.v3i2.10644 International Journal of the Environment Vol.3(2) 2014: 311-323

scholarly journals N<sub>2</sub>O release from agro-biofuel production negates global warming reduction by replacing fossil fuels

2007 ◽  
Vol 7 (4) ◽  
pp. 11191-11205 ◽  
Author(s):  
P. J. Crutzen ◽  
A. R. Mosier ◽  
K. A. Smith ◽  
W. Winiwarter
Keyword(s):  
Global Warming ◽  
Large Scale ◽  
Fossil Fuels ◽  
Fossil Fuel ◽  
N2o Emission ◽  
Climate Impacts ◽  
Biofuel Production ◽  
N2o Emissions ◽  
Agricultural Crop ◽  
The Relationship

Abstract. The relationship, on a global basis, between the amount of N fixed by chemical, biological or atmospheric processes entering the terrestrial biosphere, and the total emission of nitrous oxide (N2O), has been re-examined, using known global atmospheric removal rates and concentration growth of N2O as a proxy for overall emissions. The relationship, in both the pre-industrial period and in recent times, after taking into account the large-scale changes in synthetic N fertiliser production and deforestation, is consistent, showing an overall conversion factor of 3–5%. This factor is covered only in part by the ~1% of "direct" emissions from agricultural crop lands estimated by IPCC (2006), or the "indirect" emissions cited therein. This means that the extra N2O entering the atmosphere as a result of using N to produce crops for biofuels will also be correspondingly greater than that estimated just on the basis of IPCC (2006). When the extra N2O emission from biofuel production is calculated in "CO2-equivalent" global warming terms, and compared with the quasi-cooling effect of "saving" emissions of fossil fuel derived CO2, the outcome is that the production of commonly used biofuels, such as biodiesel from rapeseed and bioethanol from corn (maize), can contribute as much or more to global warming by N2O emissions than cooling by fossil fuel savings. Crops with less N demand, such as grasses and woody coppice species have more favourable climate impacts. This analysis only considers the conversion of biomass to biofuel. It does not take into account the use of fossil fuel on the farms and for fertilizer and pesticide production, but it also neglects the production of useful co-products. Both factors partially compensate each other. This needs to be analyzed in a full life cycle assessment.

Sign in / Sign up

Export Citation Format

Share Document