Ultrastructural observations of the rust fungus Physopella zeae in Zea mays

1983 ◽  
Vol 61 (8) ◽  
pp. 2231-2242 ◽  
Author(s):  
Michèle C. Heath ◽  
M. R. Bonde
Keyword(s):  
Plant Cell Wall ◽  
Rust Fungus ◽  
Plant Cells ◽  
Similar Material ◽  
Mesophyll Cells ◽  
Intracellular Location ◽  
Transmission Electron ◽  
The Matrix ◽  
Ultrastructural Characteristics ◽  
Mother Cells

Examination of sporulating uredia of the tropical corn rust fungus, Physopella zeae, with the transmission electron microscope revealed that this fungus possessed most of the distinguishing ultrastructural characteristics reported for temperate zone inhabiting members of the Uredinales. Physopella zeae differed from these latter fungi in the repeated production of urediospores from the same site on the sporogenous cell, and in the intracellular location of most of the mycelium. The intracellular mycelium was differentiated into structurally unspecialized hyphae and structurally distinct haustoria arising from differentiated haustorial mother cells which were located in the neighbouring host cell. Both types of intracellular structures were covered with a matrix, and that around the intracellular hyphae was continuous with similar material lining the plant cell wall. The matrix was thicker and more compact around intracellular hyphae than around the bodies of haustoria. The matrix lining the host walls was thinnest in sections of mesophyll cells containing a ratio of haustoria – intracellular hyphae profiles greater than one. These data suggest that the haustorium may actively inhibit matrix formation in invaded plant cells.

The temporal relationship between the development of intracellular hyphae and haustoria by Physopella zeae in Zea mays

1988 ◽  
Vol 66 (4) ◽  
pp. 742-744 ◽  
Author(s):  
Michèle C. Heath ◽  
M. R. Bonde
Keyword(s):  
Plant Cell ◽  
Mother Cell ◽  
Plant Cell Wall ◽  
Rust Fungus ◽  
Morphological Differentiation ◽  
Adjacent Cell ◽  
Previous Suggestion ◽  
Epidermal Tissue ◽  
Developmental Relationship ◽  
Mother Cells

To investigate the developmental relationship between haustoria and intracellular hyphae, fixed and cleared whole mounts of com leaves infected with the tropical corn rust fungus Physopella zeae (Mains) Cumm. & Ramachar were examined by interference contrast light microscopy. Haustoria were clearly distinguished from intracellular hyphae by their morphological differentiation into a filamentous body and a narrow neck. The latter was encircled by a thin neckband, which appeared to develop in young haustoria at the time when the haustorial body started to expand. Observations made at the colony margins suggested that the fungus grew into uninvaded epidermal tissue in the following sequence: (i) formation of a haustorium from a haustorial mother cell in an adjacent cell, (ii) formation of an intracellular hypha next to the haustorium by the same intracellular hypha that had formed the haustorial mother cell, (iii) growth of the intracellular hypha within the newly invaded plant cell, (iv) formation by the intracellular hyphae of haustorial mother cells against the plant cell wall adjacent to an uninvaded cell, and (v) formation of haustoria in the uninvaded cell. These results support the previous suggestion that the haustorium may induce a state of susceptibility in the plant cell, "paving the way" for invasion by the intracellular hyphae.

Fungal development and host cell responses to the rust fungus Puccinia substriata var. indica in seedling and mature leaves of susceptible and resistant pearl millet

1991 ◽  
Vol 69 (6) ◽  
pp. 1207-1219 ◽  
Author(s):  
J. Taylor ◽  
C. W. Mims
Keyword(s):  
Host Cell ◽  
Pearl Millet ◽  
Rust Fungus ◽  
Plant Cells ◽  
Host Cells ◽  
Resistant Cultivar ◽  
Fungal Colonization ◽  
Mature Leaves ◽  
Before And After ◽  
Mother Cells

The rust fungus Puccinia substriata var. indica established a compatible relationship with host cells, characterized by large numbers of haustoria and an extensive system of intercellular hyphae, in seedling leaves of the susceptible pearl millet cultivar Tift 23DB. At some infection sites, however, necrotic host cells and papillae formed by plant cells adjacent to infection hyphae or haustorial mother cells were noted. In seedling leaves of the moderately resistant cultivar 86-8770, the initial interaction between host cells and the pathogen was quite variable and included successful haustorium formation as well as papilla deposition. Necrosis of host cells apparently developed as a gradual disorganization of the cytoplasm of invaded and surrounding host cells and occurred at all infection sites by 2 days postinoculation. In seedling leaves of the highly resistant cultivar Tift 85DB, haustoria were established at early stages of development, followed by a rapid necrosis response at 1 day postinoculation. Host cell disintegration was noted both before and after abnormalities in haustoria were observed. In mature leaves of all three cultivars, wall deposits were quite extensive at 12 h postinoculation. In addition, necrotic plant cells appeared rapidly in both susceptible and resistant cultivars. Both of these factors may have contributed to the increased resistance to fungal colonization observed in mature leaves. Key words: Puccinia substriata var. indica, pearl millet rust, host resistance, ultrastructure.

Influence of Heat Treatments on Microstructures in an Fe-Co-V Alloy

1974 ◽  
Vol 32 ◽  
pp. 512-513
Author(s):  
S. Mahajan ◽  
M. R. Pinnel ◽  
J. E. Bennett
Keyword(s):  
Single Phase ◽  
Alloy Composition ◽  
Supersaturated Solid Solution ◽  
Cell Formation ◽  
Heat Treatments ◽  
Air Cooling ◽  
Iced Brine ◽  
Transmission Electron ◽  
The Matrix ◽  
Bcc Structure

The microstructural changes in an Fe-Co-V alloy (composition by wt.%: 2.97 V, 48.70 Co, 47.34 Fe and balance impurities, such as C, P and Ni) resulting from different heat treatments have been evaluated by optical metallography and transmission electron microscopy. Results indicate that, on air cooling or quenching into iced-brine from the high temperature single phase ϒ (fcc) field, vanadium can be retained in a supersaturated solid solution (α2) which has bcc structure. For the range of cooling rates employed, a portion of the material appears to undergo the γ-α2 transformation massively and the remainder martensitically. Figure 1 shows dislocation topology in a region that may have transformed martensitically. Dislocations are homogeneously distributed throughout the matrix, and there is no evidence for cell formation. The majority of the dislocations project along the projections of <111> vectors onto the (111) plane, implying that they are predominantly of screw character.

Determination of the phase structure of polymerblends by electron microscopy

1978 ◽  
Vol 36 (1) ◽  
pp. 492-493
Author(s):  
Dr. G. Kaemof
Keyword(s):  
Screw Extruder ◽  
Electron Microscopic ◽  
Thin Sections ◽  
Single Screw Extruder ◽  
Transmission Electron ◽  
The Matrix ◽  
Twin Screw ◽  
Special Case ◽  
Microscopic Investigations

A mixture of polycarbonate (PC) and styrene-acrylonitrile-copolymer (SAN) represents a very good example for the efficiency of electron microscopic investigations concerning the determination of optimum production procedures for high grade product properties.The following parameters have been varied:components of charge (PC : SAN 50 : 50, 60 : 40, 70 : 30), kind of compounding machine (single screw extruder, twin screw extruder, discontinuous kneader), mass-temperature (lowest and highest possible temperature).The transmission electron microscopic investigations (TEM) were carried out on ultra thin sections, the PC-phase of which was selectively etched by triethylamine.The phase transition (matrix to disperse phase) does not occur - as might be expected - at a PC to SAN ratio of 50 : 50, but at a ratio of 65 : 35. Our results show that the matrix is preferably formed by the components with the lower melting viscosity (in this special case SAN), even at concentrations of less than 50 %.

The microstructure of a TiB2/Ti-47 Al composite material

1989 ◽  
Vol 47 ◽  
pp. 674-675
Author(s):  
O. Popoola ◽  
A.H. Heuer ◽  
P. Pirouz
Keyword(s):  
Composite Material ◽  
Ion Beam ◽  
Chemical Properties ◽  
Intermetallic Alloys ◽  
Transmission Electron ◽  
Diamond Polishing ◽  
Al Composite ◽  
The Matrix ◽  
Argon Ion ◽  
And Chemical Properties

The addition of fibres or particles (TiB2, SiC etc.) into TiAl intermetallic alloys could increase their toughness without compromising their good high temperature mechanical and chemical properties. This paper briefly discribes the microstructure developed by a TiAl/TiB2 composite material fabricated with the XD™ process and forged at 960°C.The specimens for transmission electron microscopy (TEM) were prepared in the usual way (i.e. diamond polishing and argon ion beam thinning) and examined on a JEOL 4000EX for microstucture and on a Philips 400T equipped with a SiLi detector for microanalyses.The matrix was predominantly γ (TiAl with L10 structure) and α2(TisAl with DO 19 structure) phases with various morphologies shown in figure 1.

scholarly journals Oxygen Induced Phase Transformation in TC21 Alloy with a Lamellar Microstructure

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 163
Author(s):  
Shu Wang ◽  
Yilong Liang ◽  
Hao Sun ◽  
Xin Feng ◽  
Chaowen Huang
Keyword(s):  
Electron Microscopy ◽  
Phase Transformation ◽  
Oxygen Uptake ◽  
Titanium Alloys ◽  
Electron Backscatter Diffraction ◽  
Lamellar Microstructure ◽  
Α Phase ◽  
Transmission Electron ◽  
The Matrix ◽  
Oxygen Ingress

The main objective of the present study was to understand the oxygen ingress in titanium alloys at high temperatures. Investigations reveal that the oxygen diffusion layer (ODL) caused by oxygen ingress significantly affects the mechanical properties of titanium alloys. In the present study, the high-temperature oxygen ingress behavior of TC21 alloy with a lamellar microstructure was investigated. Microstructural characterizations were analyzed through optical microscopy (OM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). Obtained results demonstrate that oxygen-induced phase transformation not only enhances the precipitation of secondary α-phase (αs) and forms more primary α phase (αp), but also promotes the recrystallization of the ODL. It was found that as the temperature of oxygen uptake increases, the thickness of the ODL initially increases and then decreases. The maximum depth of the ODL was obtained for the oxygen uptake temperature of 960 °C. In addition, a gradient microstructure (αp + β + βtrans)/(αp + βtrans)/(αp + β) was observed in the experiment. Meanwhile, it was also found that the hardness and dislocation density in the ODL is higher than that that of the matrix.

The effect of composition and cooling rate on the structure of rapidly solidified (Fe, Ni)3Al–C alloys

1989 ◽  
Vol 4 (1) ◽  
pp. 44-49 ◽  
Author(s):  
S. A. Myers ◽  
C. C. Koch
Keyword(s):  
Cooling Rate ◽  
Base Alloy ◽  
Weight Percent ◽  
Quench Rate ◽  
Transmission Electron ◽  
Metastable Structures ◽  
Metastable Structure ◽  
The Matrix ◽  
Rapidly Solidified ◽  
Kinetics Of

There is controversy in the literature regarding the existence of the metastable γ′ phase with an ordered Ll2 structure in rapidly solidified Fe–Ni–Al–C alloys. In this study, the quench rate–metastable structure dependence was examined in the Fe–20Ni–8Al–2C (weight percent) alloy. The effect of silicon on the kinetics of phase formation was studied by adding two weight percent silicon to a base alloy of Fe–20Ni–8Al–2C. Samples were rapidly solidified in an arc hammer apparatus and examined by transmission electron microscopy. In the Fe–20Ni–8Al–2C alloy, the nonequilibrium γ′ and γ phases were found in foils 65 to 100 μm thick. At higher quench rates, i.e., thinner samples, the matrix was observed to be disordered fcc γ with K-carbide precipitates. Samples containing silicon were found to have a matrix composed of γ′ and γ structures when the foils were thicker than 40 μm. At higher quench rates, the matrix was disordered fcc γ with K-carbide precipitates. The nonequilibrium γ′ and γ structures are present in samples with or without silicon, but are observed at higher cooling rates with the addition of silicon. This sensitivity to cooling rate and composition in resulting metastable structures may explain the differences reported in the literature for these rapidly solidified materials.

Atomic-scale structural and compositional analyses of Ruddlesden-Popper planar faults in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics

2009 ◽  
Vol 24 (8) ◽  
pp. 2596-2604 ◽  
Author(s):  
Sašo Šturm ◽  
Makoto Shiojiri ◽  
Miran Čeh
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Atomic Scale ◽  
Transmission Electron ◽  
Initial Stage ◽  
Final Microstructure ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

The microstructure in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics is strongly affected by the formation of Ruddlesden-Popper fault–rich (RP fault) lamellae, which are coherently intergrown with the matrix of the perovskite grains. We studied the structure and chemistry of RP faults by applying quantitative high-resolution transmission electron microscopy and high-angle annular dark-field scanning transmission electron microscopy analyses. We showed that the Sr2+ and Ca2+ dopant ions form RP faults during the initial stage of sintering. The final microstructure showed preferentially grown RP fault lamellae embedded in the central part of the anisotropic perovskite grains. In contrast, the dopant Ba2+ ions preferably substituted for Sr2+ in the SrTiO3 matrix by forming a BaxSr1−xTiO3 solid solution. The surplus of Sr2+ ions was compensated structurally in the later stages of sintering by the formation of SrO-rich RP faults. The resulting microstructure showed RP fault lamellae located at the surface of equiaxed BaxSr1-xTiO3 perovskite grains.

Development of the Quadripolar Meiotic Cytoskeleton in Spore Mother Cells of the Moss Funaria Hygrometrica

1988 ◽  
Vol 91 (1) ◽  
pp. 127-137
Author(s):  
C. H. BUSBY ◽  
B.E. S. GUNNING
Keyword(s):  
Meiotic Prophase ◽  
Metaphase Plate ◽  
Plant Cells ◽  
Preprophase Band ◽  
The Other ◽  
Higher Plant ◽  
Funaria Hygrometrica ◽  
Condensed Form ◽  
Prophase Nucleus ◽  
Mother Cells

Evidence presented in the accompanying paper that plastids function as microtubule (MT)-organizing centres for development of the quadripolar cytoskeleton of pre-meiotic spore mother cells (SMCs) in the moss Funaria hygrometrica is complemented here by observations on the MT system in these cells. Early in meiotic prophase numerous MTs align progressively along the two plastids as they elongate. Concomitant with (and perhaps causal for) plastid rotation, new MT arrays grow from each tip of each plastid to both tips of the other plastid. The ‘along-plastid’ and ‘between-plastid’ arrays ultimately form the edges of a tetrahedron, enclosing the prophase nucleus. MT breakdown at the centre of each edge leaves four cones of MTs, one emanating from each vertex, located at the plastid tips. These partially fuse in between-plastid pairs to give a twisted spindle with broad knife-edge poles oriented at right angles to one another, i.e. a condensed form of the quadripolar precursor. The twist causes the metaphase plate and the subsequent phragmoplast and organelle band to be saddle-shaped, and the daughter nuclei to be elongated perpendicular to one another along the two knife edges. The tetrahedral array returns during interkinesis and again breaks down into four cones of MTs centred on the plastid tips; these, however, now become individual half spindles for the two perpendicularly arranged second division spindles. When meiosis is completed the four haploid nuclei thus come to lie at the vertices of a tetrahedron that was established by MT-mediated plastid positioning during meiotic prophase. The tetrahedral cage of MTs precedes meiosis yet predicts the planes of division, and in these two respects it is the meiotic counterpart of the preprophase band of MTs, which develops before mitosis in most higher plant cells.

scholarly journals Exploring the Capability of HAADF-STEM Techniques to Characterize Graphene Distribution in Nanocomposites by Simulations

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
N. Baladés ◽  
D. L. Sales ◽  
M. Herrera ◽  
A. M. Raya ◽  
J. C. Hernández-Garrido ◽  
...  
Keyword(s):  
Electron Tomography ◽  
Carbon Matrix ◽  
Reconstruction Algorithm ◽  
Dark Field ◽  
Graphene Layers ◽  
Transmission Electron ◽  
Dispersion Degree ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

This paper explores the capability of scanning transmission electron microscopy (STEM) techniques in determining the dispersion degree of graphene layers within the carbon matrix by using simulated high-angle annular dark-field (HAADF) images. Results ensure that unmarked graphene layers are only detectable if their orientation is parallel to the microscope beam. Additionally, gold-marked graphene layers allow evaluating the dispersion degree in structural composites. Moreover, electron tomography has been demonstrated to provide truthfully 3D distribution of the graphene sheets inside the matrix when an appropriate reconstruction algorithm and 2D projections including channelling effect are used.

Sign in / Sign up

Export Citation Format

Share Document