PRODUCTION AND PROPERTIES OF 2,3-BUTANEDIOL: X. THE EFFECTS OF SURFACE–VOLUME RATIO AND REDUCED PRESSURE ON THE FERMENTATION OF CARBOHYDRATES BY AEROBACILLUS POLYMYXA AND AEROBACTER AEROGENES

1946 ◽  
Vol 24f (2) ◽  
pp. 107-116 ◽  
Author(s):  
G. A. Adams ◽  
J. D. Leslie
Keyword(s):  
Carbon Dioxide ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Reduced Pressure ◽  
Aerobacter Aerogenes ◽  
Fermentation Rate ◽  
Per Se ◽  
Reduced Pressures

The rate of fermentation of wheat mashes by Aerobacillus polymyxa was markedly increased by providing a high surface-area–volume ratio. Exposure to air or oxygen per se was not a controlling factor since an atmosphere of nitrogen gave the same effect. Inhibition of fermentation of shallow layers of mash by exposure to carbon dioxide suggested that escape of fermentation gases (mainly carbon dioxide) might be the major factor affecting the fermentation rate. Support has been given to this hypothesis by the marked increase in rate obtained when wheat mashes were fermented under reduced pressures.Fermentation of 15% wheat mashes, normally requiring 72 to 96 hr., were complete in 48 hr. under 5 in. pressure (absolute). The fermentation rate was accelerated by decreasing pressures but was retarded slightly by increasing depths of mash. The butanediol–ethanol ratio became progressively lower with decreasing pressures, showing that such conditions favour ethanol formation.Fermentation of sugar media by Aerobacter aerogenes was only mildly stimulated by reduced pressures. This treatment compares unfavourably with aeration as a means of increasing the fermentation rate of this organism.

scholarly journals Developing Eco-Friendly and Cost-Effective Porous Adsorbent for Carbon Dioxide Capture

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 1962
Author(s):  
Mahboubeh Nabavinia ◽  
Baishali Kanjilal ◽  
Noahiro Fujinuma ◽  
Amos Mugweru ◽  
Iman Noshadi
Keyword(s):  
Carbon Dioxide ◽  
Surface Area ◽  
Co2 Capture ◽  
High Surface ◽  
Scale Up ◽  
Polymer Networks ◽  
High Surface Area ◽  
Excellent Thermal Stability ◽  
Doped Polymers ◽  
Metal Doped

To address the issue of global warming and climate change issues, recent research efforts have highlighted opportunities for capturing and electrochemically converting carbon dioxide (CO2). Despite metal doped polymers receiving widespread attention in this respect, the structures hitherto reported lack in ease of synthesis with scale up feasibility. In this study, a series of mesoporous metal-doped polymers (MRFs) with tunable metal functionality and hierarchical porosity were successfully synthesized using a one-step copolymerization of resorcinol and formaldehyde with Polyethyleneimine (PEI) under solvothermal conditions. The effect of PEI and metal doping concentrations were observed on physical properties and adsorption results. The results confirmed the role of PEI on the mesoporosity of the polymer networks and high surface area in addition to enhanced CO2 capture capacity. The resulting Cobalt doped material shows excellent thermal stability and promising CO2 capture performance, with equilibrium adsorption of 2.3 mmol CO2/g at 0 °C and 1 bar for at a surface area 675.62 m2/g. This mesoporous polymer, with its ease of synthesis is a promising candidate for promising for CO2 capture and possible subsequent electrochemical conversion.

Construction and carbon dioxide capture of microporous polymer networks with high surface area based on cross-linkable linear polyimides

2019 ◽  
Vol 10 (33) ◽  
pp. 4611-4620 ◽  
Author(s):  
Ningning Song ◽  
Tianjiao Wang ◽  
Hongyan Yao ◽  
Tengning Ma ◽  
Kaixiang Shi ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Surface Area ◽  
Carbon Dioxide Capture ◽  
High Surface ◽  
Polymer Networks ◽  
High Surface Area ◽  
Crosslinking Reaction ◽  
Adsorption Performance ◽  
Microporous Polymer

Microporous polyimide networks with high surface area and excellent CO2 adsorption performance have been constructed based on cross-linkable linear polyimides through crosslinking reaction.

scholarly journals Enhanced photoelectrochemical water splitting performance using morphology-controlled BiVO4 with W doping

2017 ◽  
Vol 8 ◽  
pp. 2640-2647 ◽  
Author(s):  
Xin Zhao ◽  
Zhong Chen
Keyword(s):  
Surface Area ◽  
Light Absorption ◽  
Charge Separation ◽  
High Surface ◽  
High Surface Area ◽  
Charge Injection ◽  
Volume Ratio ◽  
Solvent Ratio ◽  
Photoelectrochemical Performance ◽  
Interfacial Charge

Nanostructures exhibit numerous merits to improve the efficiency in solar-to-energy conversion. These include shortened carrier collection pathways, an increased volume ratio between depletion layer and bulk, enhanced light capture due to multiple light scattering in nanostructures, and a high surface area for photochemical conversion reactions. In this study, we describe the synthesis of morphology-controlled W-doped BiVO4 by simply tuning the solvent ratio in precursor solutions. Planar and porous W-doped BiVO4 thin films were prepared and compared. The porous film, which exhibits increased surface area and enhanced light absorption, has displayed enhanced charge separation and interfacial charge injection. Our quantitative analysis showed an enhancement of about 50% of the photoelectrochemical performance for the porous structure compared to the planar structure. This enhancement is attributed to improved light absorption (13% increase), charge separation (14% increase), and interfacial charge injection (20% increase).

One-Pot Procedure to Synthesize High Surface Area Alumina Nanofibers Using Supercritical Carbon Dioxide

Langmuir ◽  
2010 ◽  
Vol 26 (4) ◽  
pp. 2707-2713 ◽  
Author(s):  
Muhammad B. I. Chowdhury ◽  
Rouhong Sui ◽  
Rahima A. Lucky ◽  
Paul A. Charpentier
Keyword(s):  
Carbon Dioxide ◽  
Supercritical Carbon Dioxide ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
One Pot ◽  
Alumina Nanofibers ◽  
Supercritical Carbon

scholarly journals Nanotechnology and Its Applications to Medicine: an over view

QJM ◽  
2020 ◽  
Vol 113 (Supplement_1) ◽  
Author(s):  
H Ibrahim
Keyword(s):  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Electrospinning Process ◽  
Nano Particles ◽  
High Production Rate ◽  
Nano Fiber ◽  
Nano Medicine ◽  
Bio Compatibility

Abstract Nowadays there are more interesting with nanotechnology and its applications in several sectors specially in medicine for diagnoses, therapeutic and research biomedical tools. It can be defined as any process or technique used to produce material in nano-scale structure with particle size ranged from 1-100 nm. The utilization of nanotechnology in human health benefits known as nano medicine. So that nanotechnology has firmly entered the drug delivery realm to maximize drug therapeutic activity and minimize its undesirable side effects. Herein we deal with both nanoparticles and nano-fibers and their applications in medical field. Nano-particles have unique properties from its small size with high surface area therefore it provides larger than particle numbers from that prepared with convention methods. In addition, nanoparticles can be used to improve various drug bio-availability from its biodegradability and bio-compatibility. Nano-fibers have huge surface area to volume ratio which increase its performance in several applications. Nano-fiber produced via electrospinning process (simple and have high production rate). It can be used in many applications such as water filtration, tissue engineering scaffold, wounds, fiber composites, drug release and protective clothes.

Growth of Carbon Nanotubes on Carbon Toray Paper for Bio-Fuel Cell Applications

2007 ◽  
Author(s):  
Bhupesh Chandra ◽  
Joshua T. Kace ◽  
Yuhao Sun ◽  
S. C. Barton ◽  
James Hone
Keyword(s):  
Carbon Nanotubes ◽  
Fuel Cell ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Multiwall Carbon Nanotubes ◽  
Volume Ratio ◽  
Carbon Paper ◽  
Heating Process ◽  
Scale Production

In recent years carbon nanotubes have emerged as excellent materials for applications in which high surface area is required e.g. gas sensing, hydrogen storage, solar cells etc. Ultra-high surface to volume ratio is also a desirable property in the applications requiring enhanced catalytic activity where these high surface area materials can act as catalyst supports. One of the fastest developing areas needing such materials is fuel-cell. Here we investigate the process through which carbon nanotubes can be manufactured specifically to be used to increase the surface area of a carbon paper (Toray™). This carbon support is used in bio-catalytic fuel cell as an electrode to support enzyme which catalyzes the redox reaction. Deposition of nanotubes on these carbon fibers can result in great enhancement in the overall surface area to support the enzyme, which increases the reaction rate inside the fuel cell. The present paper describes a method to achieve ultra-thick growth of multiwall carbon nanotubes (MWNT) on a carbon Toray™ paper using a joule heating process and gas-phase catalyst. Using this method, we are able to achieve rapid, high-density, and uniform MWNT growth. This method is also potentially scalable toward larger-scale production.

Sign in / Sign up

Export Citation Format

Share Document