IN-VIVO ELEMENTAL ANALYSIS BY PIXE-μ-CT

2007 ◽  
Vol 17 (01n02) ◽  
pp. 41-46 ◽  
Author(s):  
Y. KAWAMURA ◽  
K. ISHII ◽  
H. YAMAZAKI ◽  
S. MATSUYAMA ◽  
Y. KIKUCHI ◽  
...  
Keyword(s):  
High Resolution ◽  
Absorption Edge ◽  
Ion Beam ◽  
Projection Data ◽  
Elemental Distribution ◽  
X Rays ◽  
Ct Reconstruction ◽  
3D Images ◽  
X Ray

We have developed “micron-CT”, using micro-PIXE for in-vivo imaging. This system comprises an X-ray CCD camera (Hamamatsu photonics C8800X9) with high resolution (pixel size: 8×8 μm 2, number of pixels: 1000×1000) and an X-ray-point-source with a spot size of 1.5×1.5 μm 2 which is generated by irradiation of a microbeam on a pure metal target. Thus we can acquire projection data with high resolution. The sample is placed in a small diameter tube and is rotated by a stepping motor. The 3D images were reconstructed from the obtained projection data by using cone-beam CT reconstruction algorithm. X-ray spectra produced by heavy charged particle bombardment, exhibit a much smaller continuous background compared to electron bombardment. Therefore, X-rays produced by ion beam can be used as a monochromatic and low energy X-ray source. The feature is very effective to investigate small insects. Moreover we can get elemental distribution image of object by choosing appropriate characteristic X-rays corresponding to the absorption edge. On the other hand, the conventional X-ray CT, in which continuous X-rays are used, provides images of the electron density in the object. Using this system, we were able to get 3D images of a living ant's head with 6 μm spatial resolution. By using Fe - K -X-rays (6.40 keV) and Co - K -X-rays (6.93 keV), we can investigate the 3D distribution of Mn ( K -absorption edge = 6.54 keV) in an ant's head.

X-Ray absorption edge elemental imaging of B. thuringienis

1989 ◽  
Vol 47 ◽  
pp. 212-213
Author(s):  
R. L. Stears
Keyword(s):  
Absorption Edge ◽  
Elemental Distribution ◽  
X Rays ◽  
Differential Absorption ◽  
Synchrotron Source ◽  
High Brightness ◽  
X Ray ◽  
Elemental Imaging ◽  
Cellular Integrity ◽  
X Ray Absorption

Because of the nature of the bacterial endospore, little work has been done on analyzing their elemental distribution and composition in the intact, living, hydrated state. The majority of the qualitative analysis entailed intensive disruption and processing of the endospores, which effects their cellular integrity and composition.Absorption edge imaging permits elemental analysis of hydrated, unstained specimens at high resolution. By taking advantage of differential absorption of x-ray photons in regions of varying elemental composition, and using a high brightness, tuneable synchrotron source to obtain monochromatic x-rays, contact x-ray micrographs can be made of unfixed, intact endospores that reveal sites of elemental localization. This study presents new data demonstrating the application of x-ray absorption edge imaging to produce elemental information about nitrogen (N) and calcium (Ca) localization using Bacillus thuringiensis as the test specimen.

The Basic Physical Principles of Ion, Electron, and X-Ray Detectors and Their Application to Microanalysis

1985 ◽  
Vol 43 ◽  
pp. 154-157
Author(s):  
A.J. Tousimis
Keyword(s):  
Ion Beam ◽  
Depth Resolution ◽  
Sample Surface ◽  
High Energy ◽  
X Rays ◽  
X Ray ◽  
Electrons And Ions ◽  
Spatial Depth ◽  
Minimum Surface Area ◽  
Physical Principles

An integral and of prime importance of any microtopography and microanalysis instrument system is its electron, x-ray and ion detector(s). The resolution and sensitivity of the electron microscope (TEM, SEM, STEM) and microanalyzers (SIMS and electron probe x-ray microanalyzers) are closely related to those of the sensing and recording devices incorporated with them.Table I lists characteristic sensitivities, minimum surface area and depth analyzed by various methods. Smaller ion, electron and x-ray beam diameters than those listed, are possible with currently available electromagnetic or electrostatic columns. Therefore, improvements in sensitivity and spatial/depth resolution of microanalysis will follow that of the detectors. In most of these methods, the sample surface is subjected to a stationary, line or raster scanning photon, electron or ion beam. The resultant radiation: photons (low energy) or high energy (x-rays), electrons and ions are detected and analyzed.

Preparation of cultured astrocytes for x-ray microanalysis

1989 ◽  
Vol 47 ◽  
pp. 988-989
Author(s):  
N.K.R. Smith ◽  
K.E. Hunter ◽  
P. Mobley ◽  
L.P. Felpel
Keyword(s):  
Cultured Cells ◽  
Elemental Content ◽  
Elemental Distribution ◽  
Sprague Dawley ◽  
X Ray ◽  
Cultured Astrocytes ◽  
Freeze Dried ◽  
Ultimate Objective

Electron probe energy dispersive x-ray microanalysis (XRMA) offers a powerful tool for the determination of intracellular elemental content of biological tissue. However, preparation of the tissue specimen , particularly excitable central nervous system (CNS) tissue , for XRMA is rather difficult, as dissection of a sample from the intact organism frequently results in artefacts in elemental distribution. To circumvent the problems inherent in the in vivo preparation, we turned to an in vitro preparation of astrocytes grown in tissue culture. However, preparations of in vitro samples offer a new and unique set of problems. Generally, cultured cells, growing in monolayer, must be harvested by either mechanical or enzymatic procedures, resulting in variable degrees of damage to the cells and compromised intracel1ular elemental distribution. The ultimate objective is to process and analyze unperturbed cells. With the objective of sparing others from some of the same efforts, we are reporting the considerable difficulties we have encountered in attempting to prepare astrocytes for XRMA.Tissue cultures of astrocytes from newborn C57 mice or Sprague Dawley rats were prepared and cultured by standard techniques, usually in T25 flasks, except as noted differently on Cytodex beads or on gelatin. After different preparative procedures, all samples were frozen on brass pins in liquid propane, stored in liquid nitrogen, cryosectioned (0.1 μm), freeze dried, and microanalyzed as previously reported.

3D Observation of Elemental Distribution of Si-Device using a Dedicated FIB/STEM System

2005 ◽  
Author(s):  
T. Yaguchi ◽  
M. Konno ◽  
T. Kamino ◽  
M. Ogasawara ◽  
K. Kaji ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Elemental Distribution ◽  
Multivariate Statistical ◽  
X Ray ◽  
Sample Rotation ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Elemental Maps

Abstract A technique for preparation of a pillar shaped sample and its multi-directional observation of the sample using a focused ion beam (FIB) / scanning transmission electron microscopy (STEM) system has been developed. The system employs an FIB/STEM compatible sample rotation holder with a specially designed rotation mechanism, which allows the sample to be rotated 360 degrees [1-3]. This technique was used for the three dimensional (3D) elemental mapping of a contact plug of a Si device in 90 nm technology. A specimen containing a contact plug was shaped to a pillar sample with a cross section of 200 nm x 200 nm and a 5 um length. Elemental analysis was performed with a 200 kV HD-2300 STEM equipped with the EDAX genesis Energy dispersive X-ray spectroscopy (EDX) system. Spectrum imaging combined with multivariate statistical analysis (MSA) [4, 5] was used to enhance the weak X-ray signals of the doped area, which contain a low concentration of As-K. The distributions of elements, especially the dopant As, were successfully enhanced by MSA. The elemental maps were .. reconstructed from the maps.

scholarly journals Revealing Inflammatory Indications Induced by Titanium Alloy Wear Debris in Periprosthetic Tissue by Label-Free Correlative High-Resolution Ion, Electron and Optical Microspectroscopy

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3048
Author(s):  
Rok Podlipec ◽  
Esther Punzón-Quijorna ◽  
Luka Pirker ◽  
Mitja Kelemen ◽  
Primož Vavpetič ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
High Resolution ◽  
Wear Debris ◽  
Ion Beam ◽  
Quantitative Measure ◽  
Label Free ◽  
Periprosthetic Tissue ◽  
Correlative Microscopy ◽  
X Ray ◽  
Tissue Reactions

The metallic-associated adverse local tissue reactions (ALTR) and events accompanying worn-broken implant materials are still poorly understood on the subcellular and molecular level. Current immunohistochemical techniques lack spatial resolution and chemical sensitivity to investigate causal relations between material and biological response on submicron and even nanoscale. In our study, new insights of titanium alloy debris-tissue interaction were revealed by the implementation of label-free high-resolution correlative microscopy approaches. We have successfully characterized its chemical and biological impact on the periprosthetic tissue obtained at revision surgery of a fractured titanium-alloy modular neck of a patient with hip osteoarthritis. We applied a combination of photon, electron and ion beam micro-spectroscopy techniques, including hybrid optical fluorescence and reflectance micro-spectroscopy, scanning electron microscopy (SEM), Energy-dispersive X-ray Spectroscopy (EDS), helium ion microscopy (HIM) and micro-particle-induced X-ray emission (micro-PIXE). Micron-sized wear debris were found as the main cause of the tissue oxidative stress exhibited through lipopigments accumulation in the nearby lysosome. This may explain the indications of chronic inflammation from prior histologic examination. Furthermore, insights on extensive fretting and corrosion of the debris on nm scale and a quantitative measure of significant Al and V release into the tissue together with hydroxyapatite-like layer formation particularly bound to the regions with the highest Al content were revealed. The functional and structural information obtained at molecular and subcellular level contributes to a better understanding of the macroscopic inflammatory processes observed in the tissue level. The established label-free correlative microscopy approach can efficiently be adopted to study any other clinical cases related to ALTR.

scholarly journals More than XRF Mapping: STEAM (Statistically Tailored Elemental Angle Mapper) a Pioneering Analysis Protocol for Pigment Studies

2021 ◽  
Vol 11 (4) ◽  
pp. 1446
Author(s):  
Jacopo Orsilli ◽  
Anna Galli ◽  
Letizia Bonizzoni ◽  
Michele Caccia
Keyword(s):  
Cultural Heritage ◽  
Element Distribution ◽  
Elemental Distribution ◽  
X Rays ◽  
Spectral Angle Mapper ◽  
X Ray ◽  
Fluorescence Radiation ◽  
Set Up ◽  
Non Destructive ◽  
Analysis Protocol

Among the possible variants of X-Ray Fluorescence (XRF), applications exploiting scanning Macro-XRF (MA-XRF) are lately widespread as they allow the visualization of the element distribution maintaining a non-destructive approach. The surface is scanned with a focused or collimated X-ray beam of millimeters or less: analyzing the emitted fluorescence radiation, also elements present below the surface contribute to the elemental distribution image obtained, due to the penetrative nature of X-rays. The importance of this method in the investigation of historical paintings is so obvious—as the elemental distribution obtained can reveal hidden sub-surface layers, including changes made by the artist, or restorations, without any damage to the object—that recently specific international conferences have been held. The present paper summarizes the advantages and limitations of using MA-XRF considering it as an imaging technique, in synergy with other hyperspectral methods, or combining it with spot investigations. The most recent applications in the cultural Heritage field are taken into account, demonstrating how obtained 2D-XRF maps can be of great help in the diagnostic applied on Cultural Heritage materials. Moreover, a pioneering analysis protocol based on the Spectral Angle Mapper (SAM) algorithm is presented, unifying the MA-XRF standard approach with punctual XRF, exploiting information from the mapped area as a database to extend the comprehension to data outside the scanned region, and working independently from the acquisition set-up. Experimental application on some reference pigment layers and a painting by Giotto are presented as validation of the proposed method.

scholarly journals Optimization of X-ray Investigations in Dentistry Using Optical Coherence Tomography

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4554
Author(s):  
Ralph-Alexandru Erdelyi ◽  
Virgil-Florin Duma ◽  
Cosmin Sinescu ◽  
George Mihai Dobre ◽  
Adrian Bradu ◽  
...  
Keyword(s):  
Optical Coherence Tomography ◽  
Radiation Dose ◽  
Imaging Techniques ◽  
Image Resolution ◽  
Optical Coherence ◽  
X Rays ◽  
High Quality ◽  
X Ray

The most common imaging technique for dental diagnoses and treatment monitoring is X-ray imaging, which evolved from the first intraoral radiographs to high-quality three-dimensional (3D) Cone Beam Computed Tomography (CBCT). Other imaging techniques have shown potential, such as Optical Coherence Tomography (OCT). We have recently reported on the boundaries of these two types of techniques, regarding. the dental fields where each one is more appropriate or where they should be both used. The aim of the present study is to explore the unique capabilities of the OCT technique to optimize X-ray units imaging (i.e., in terms of image resolution, radiation dose, or contrast). Two types of commercially available and widely used X-ray units are considered. To adjust their parameters, a protocol is developed to employ OCT images of dental conditions that are documented on high (i.e., less than 10 μm) resolution OCT images (both B-scans/cross sections and 3D reconstructions) but are hardly identified on the 200 to 75 μm resolution panoramic or CBCT radiographs. The optimized calibration of the X-ray unit includes choosing appropriate values for the anode voltage and current intensity of the X-ray tube, as well as the patient’s positioning, in order to reach the highest possible X-rays resolution at a radiation dose that is safe for the patient. The optimization protocol is developed in vitro on OCT images of extracted teeth and is further applied in vivo for each type of dental investigation. Optimized radiographic results are compared with un-optimized previously performed radiographs. Also, we show that OCT can permit a rigorous comparison between two (types of) X-ray units. In conclusion, high-quality dental images are possible using low radiation doses if an optimized protocol, developed using OCT, is applied for each type of dental investigation. Also, there are situations when the X-ray technology has drawbacks for dental diagnosis or treatment assessment. In such situations, OCT proves capable to provide qualitative images.

scholarly journals Spectral Tomography for 3D Element Detection and Mineral Analysis

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 598
Author(s):  
Jose R. A. Godinho ◽  
Gabriel Westaway-Heaven ◽  
Marijn A. Boone ◽  
Axel D. Renno
Keyword(s):  
Energy Spectrum ◽  
3D Imaging ◽  
X Rays ◽  
3D Images ◽  
Characterization Methods ◽  
X Ray ◽  
Additional Information ◽  
Mineral Phases ◽  
Spectral Computed Tomography

This paper demonstrates the potential of a new 3D imaging technique, Spectral Computed Tomography (sp-CT), to identify heavy elements inside materials, which can be used to classify mineral phases. The method combines the total X-ray transmission measured by a normal polychromatic X-ray detector, and the transmitted X-ray energy spectrum measured by a detector that discriminates between X-rays with energies of about 1.1 keV resolution. An analysis of the energy spectrum allows to identify sudden changes of transmission at K-edge energies that are specific of each element. The additional information about the elements in a phase improves the classification of mineral phases from grey-scale 3D images that would be otherwise difficult due to artefacts or the lack of contrast between phases. The ability to identify the elements inside the minerals that compose ore particles and rocks is crucial to broaden the application of 3D imaging in Earth sciences research and mineral process engineering, which will represent an important complement to traditional 2D imaging mineral characterization methods. In this paper, the first applications of sp-CT to classify mineral phases are showcased and the limitations and further developments are discussed.

Cryogenic high-resolution X-ray spectrometers for SR-XRF and microanalysis

1998 ◽  
Vol 5 (3) ◽  
pp. 515-517 ◽  
Author(s):  
M. Frank ◽  
C. A. Mears ◽  
S. E. Labov ◽  
L. J. Hiller ◽  
J. B. le Grand ◽  
...  
Keyword(s):  
High Resolution ◽  
Energy Resolution ◽  
Superconducting Tunnel Junction ◽  
Semiconductor Detectors ◽  
X Rays ◽  
X Ray ◽  
Sr Xrf ◽  
Demonstration Experiment ◽  
Near Future ◽  
Stj Detector

Experimental results are presented obtained with a cryogenically cooled high-resolution X-ray spectrometer based on a 141 × 141 µm Nb-Al-Al2O3-Al-Nb superconducting tunnel junction (STJ) detector in an SR-XRF demonstration experiment. STJ detectors can operate at count rates approaching those of semiconductor detectors while still providing a significantly better energy resolution for soft X-rays. By measuring fluorescence X-rays from samples containing transition metals and low-Z elements, an FWHM energy resolution of 6–15 eV for X-rays in the energy range 180–1100 eV has been obtained. The results show that, in the near future, STJ detectors may prove very useful in XRF and microanalysis applications.

scholarly journals THE EFFECTS OF ROENTGEN RAYS ON CELL-VIRUS ASSOCIATIONS

1943 ◽  
Vol 78 (4) ◽  
pp. 285-304 ◽  
Author(s):  
William F. Friedewald ◽  
Rubert S. Anderson
Keyword(s):  
X Rays ◽  
Pathological Changes ◽  
Cellular Division ◽  
Papilloma Virus ◽  
X Ray ◽  
Crude Extracts ◽  
Domestic Rabbits ◽  
Roentgen Rays

The virus-induced papillomas of cottontail as well as domestic rabbits regress completely within a few weeks when exposed to 5,000 r of x-ray irradiation. The x-rays do not immediately kill the papilloma cells, but lead to death by inhibiting cellular division and producing pathological changes in the cells which then continue to differentiate. The virus associated with the growths, however, not only persists in undiminished amount during regression, but often an increased yield of it can be obtained on extraction. The fibroma virus in crude extracts or in vivo is inactivated by far less irradiation than the papilloma virus. 10,000 r destroys 90 per cent or more of the infectivity of the fibroma virus, whereas at least 100,000 r is required to inactivate 50 per cent of the papilloma virus in extracts containing about the same amount of protein. No variant of the papilloma virus or fibroma virus has been encountered as a result of the irradiation.

Sign in / Sign up

Export Citation Format

Share Document